Nice, very nice. The video is superb! Thanks

Great job! Nice how you tell how it's all done.

Dream shop any craftsman would love to build somethingin there, very well done project I may need to steal this design.

@bentswoodworking

3 жыл бұрын

Steal away 👍

You make it look sooo easy! Lol I’ve been watching a couple of these videos and I’m convinced I can try making my own!

@bentswoodworking

4 жыл бұрын

You can absolutely make your own!

Damn that's very professional

Sick! I wish I had all that equipment to work with. Good job.

@bentswoodworking

5 жыл бұрын

haveeair thank you!!

Excellent job sir !!!! You make it look so easy . Love watching your videos .

@bentswoodworking

5 жыл бұрын

pavlo0412 thank you so much!

Awesome job looks fantastic!!

@bentswoodworking

6 жыл бұрын

Thom spillane thank you very much!

Very nice!!!

@bentswoodworking

4 жыл бұрын

👍

Good job nice work

@bentswoodworking

5 жыл бұрын

Thanks!!

Very nice work. Any chance you have a plan or any notes about the build? I just started something very similar but different dimensions and I think I like your shelf construction better.

@bentswoodworking

Жыл бұрын

I don’t but there are some decent plans on similar ones out there.

Nice I'm gonna build myself one like yours for my game room/ movie theater for all my devices.

@bentswoodworking

5 жыл бұрын

Awesome. It’s a fun build

superbe boulot

Great build but is there any detail information you can provide for the size on cuts you made on the wood.

@bentswoodworking

3 жыл бұрын

I do not have any plans for this

New subscriber nice job on your videos. I hope you continue.

@bentswoodworking

6 жыл бұрын

Bruce thank you. Currently I release videos every two weeks. I look forward to chatting with you more in the future.

What keeps the door from scuffing the front of the cabinet down on the bottom? Making one similar thanks in advance

@bentswoodworking

3 жыл бұрын

Nothing really. I have seen some add a bottom rail.

i built one exactly like yours. just curious as to how you attached the top.

@bentswoodworking

2 жыл бұрын

Z clips

Hi Jason, great build!I want to build my first cabinet,based on your design.Question:is there a reason why you didn't hide the edge of the side trim behind the face frame?or just personal preference?

@bentswoodworking

3 жыл бұрын

Just didn’t account for it initially

Nice work! Looks great! I was wondering if you had a ballpark materials list and overall dimensions? Looked like the frame was built with 2x3s maybe and then some 3/4 or 5/8 inch plywood around the outside with a lot of 1x4s for interior and design work? I could be way off, but I'm planning on building something similar. I'll need mine to be 60"x40"x21" Thanks for the video!!

@bentswoodworking

5 жыл бұрын

Warren Dailey you’re on the right track. The first time I made this I used plans. Search for Nikki Grandy sliding door console and you will find plans that will help you out. I have made various changes since cause I have built it many times in various sizes. I don’t have any specific plans or measurements as they always vary.

Amazing!!

@bentswoodworking

4 жыл бұрын

Thanks

Good job looks really good, question what type of framing lumber did u used and also for for the top. Thanks ,keep it up.

@bentswoodworking

5 жыл бұрын

Lisardo huerta this was constructed with furniture grade pine from my local lumber supplier

Can you please tell me the items you use to make the hardware and where you buy them from. Thank you

How did you measure up for aluminum plate on the cabinet and what was the measurement for the holes on the brackets

@bentswoodworking

5 жыл бұрын

Jason Toms I lay everything first before drilling any holes.

Great project. I would really like to know more about the hardware. The one thing holding me back from making one of these is the hardware is so expensive. I was able to find the roller but when I looked up the spacers on amazon... I didn't get what I was expecting. Did you just get them at a local hardware or big box store? I even googled the part number for everbilt. No luck.

@bentswoodworking

5 жыл бұрын

Angie Overton everything I use comes from HD. I actually have another video that talk only about the hardware and how to do it.

@A.M.Independent.Consultant

4 жыл бұрын

@@bentswoodworking going to look for that video now, thnx

excellent merci pour ton partage possible d avoir les plans

@bentswoodworking

5 жыл бұрын

goemaere fabian I don’t have any plans but if you search for Nikki Grandy Sliding Door Console you will find some on the internet 👍🏻🙂

Thank You for sharing this. Beautiful work. Did you rip your own 1by or just purchased them to sized? Thank You

@bentswoodworking

4 жыл бұрын

Made my own 👍

@dannyvillar9493

4 жыл бұрын

Thank You for responding :)

Quick Question, What rail and stile bits did you use here? Have been using my table saw to make these and I think its time move over to router. Thank you!

@bentswoodworking

5 жыл бұрын

They are the tongue and groove bit set from Freud

@Cptchaos296

5 жыл бұрын

@@bentswoodworking Thank you Sir

Can I add the rails on the bottom as well?

@bentswoodworking

3 жыл бұрын

I don’t see why not

You are definitely a talented Artist!. Woodworking is such an amazing skill. Do you sell these?.

@bentswoodworking

5 жыл бұрын

Cambiumlayer 13 thank you. Yes, this was a piece requested by a client

That looks outstanding! Great job as usual. I sent you a question on the last video you sent out about cutting the vinyl strip on a Festool track. I put it in the "Discussion" part of your page. I am not sure if I did it right, or if you got a chance to look at it, but if you do get a chance, I would like to hear your opinion. Thanks!

@bentswoodworking

6 жыл бұрын

Russ Albright first off, thank you very much. Second, I wasn’t aware of the discussion post. I guess I don’t get notifications for those. I’ll take a look.

@russalbright4213

6 жыл бұрын

I completely understand. Plus, you are a busy guy. If you do get a chance I would be very interested in your opinion. Thanks for the awesome videos!

Really nice! I’m assuming you used mainly southern yellow pine and birch plywood?

@bentswoodworking

5 жыл бұрын

Ryan Jacob for this particular one that is correct

Can you please tell me what's the hardware you used to install the doors on?

@bentswoodworking

3 жыл бұрын

I actually have a video on that specifically

What size and thickness aluminum did you use for the door attachments?

@bentswoodworking

5 жыл бұрын

Brandon Magallon 1”wide and 1/8” think aluminum bar

@brandonmag57

5 жыл бұрын

Bent's Woodworking also, do you nail the face trim to the carcass or just use glue?

@bentswoodworking

5 жыл бұрын

Brandon Magallon it depends. Even if I nail it, it’s just to hold it till I get clamps on it

Great video! Were you using whitepine 3/4" for the face frame?

@bentswoodworking

4 жыл бұрын

I used furniture grade pine for the project as requested by the customer. My local lumber yard sells really nice pine

@RonMarshallrone

4 жыл бұрын

@@bentswoodworking Oh thats cool...I just got a quote from our lumberyard yesterday for some 8 quarter furn grade pine. I'd just never seen it in person before. It looks pretty decent on yours. I'm gonna have to give this stuff a shot. Thank you!

Exactly what I’m looking for. Jason, do you plans available for this build ?

@bentswoodworking

3 жыл бұрын

I do not have any plans for this unfortunately

What is the tool you use to measure and draw lines with? You have link fr that?

@bentswoodworking

4 жыл бұрын

It is a Incra Tiny T

@matthewwright4188

4 жыл бұрын

Do you find that you use that one more than a 6” one? Thanks for getting back with me on that. I appreciate it.

@bentswoodworking

4 жыл бұрын

Matthew Wright I definitely use the tiny t more then the 6”. More then anything for that matter.

@matthewwright4188

4 жыл бұрын

I think I will get one. Especially after watching you use it and watching the incra video on their products. My 6” combo square just doesn’t compare and that’s just from watching the video.

Do you have a resource for this door hardware?

@bentswoodworking

4 жыл бұрын

I have a youtube video that shows how I make it.

@abcdeqwerty123

4 жыл бұрын

@@bentswoodworking I think they are asking for the Tools and parts used in the video for the stand. It's hard to replicate without that info. You can list the parts with dimensions and tools (even link to specific tools for sale online) so people can make it themselves

oui comment pour les plans

How much did it cost to make this project ?

@bentswoodworking

4 жыл бұрын

If I remember correctly the materials cost around $300 but that is totally dependent on local pricing

What would you charge for that?

How much does this project cost?

@bentswoodworking

4 жыл бұрын

Depends on the materials you use. This one, maybe $300 in materials

Well done. You on instagram?

@bentswoodworking

6 жыл бұрын

Steve Gates thank you and yes my handle is @bentswoodworking

Plans for sale??

@bentswoodworking

4 жыл бұрын

Not for this unfortunately

@rdknght17

4 жыл бұрын

Not identical but pretty similar. www.woodbrew.tv/product/barn-door-media-console-plans/

And you only need to take out a loan for $50,000 to get the shop and all supplies shown in the video..

@mattpkp

5 жыл бұрын

He built his shop of wood working profits, another excuse to do nothing

@mingerib

5 жыл бұрын

@@mattpkp I have done the same, currently saving for a 10" jointer and festool domino!

What are and where did you get the rollers from for the top rail?