would love to see this car painted yellow. Y-49

@GarageBuiltHondas

2 жыл бұрын

Me too

Dash really came out slick man those block offs are definitely a nice touch

That's an awesome idea Jon & it looks very good to. I do think the bed liner should hold up really well with all of the uv additives & such. Hope it doesn't get hot enough to where you notice it while driving. Also, still looking forward to the GBH shirt. The GBH stickers are on my track car & daily.

Jon, it looked like if you just moved your ECU up over in the center, kinda behind your triple gauges, that would take care of the “Y” in the wiring that hangs down. Great work, as always!!

Dang, that turned out clean. You did awesome. Those block offs look perfect.

@GarageBuiltHondas

2 жыл бұрын

Thanks Seth! Beaters need some love too!

Jon, man, that looks so good! You could have a side hustle producing those block off pieces, they look ridiculously good!

@GarageBuiltHondas

2 жыл бұрын

Thanks Matt! I dig em, they came out pretty sick!

Canada here jefe...blobkoffs get the nod...my man!

Those vent block offs are legit!

Man that dash turned out awesome.

You can get another 5-10hp just by making your intake pull cooler air. Easy stuff. I'll check back in a year or so to see if dash held up, so many fixes i see don't. Specifically ones where plastic is painted. Might be better, being thicker and uv-stable, but time will tell! Also there are 3d printer files for a gauge mount for dash vents.

You should do a video on ef auto to manual conversion,maybe a sedan if you have it😂

@dukebmxrider

2 жыл бұрын

I did an auto to manual & carb d15 swap to f.i. D14 in my eg sedan painted all intetior trim also..

@JoseContreras-mv5yz

2 жыл бұрын

@@dukebmxrider im just being sarcastic with him😊he has an ef ive been waiting for him to get into. Love how hes clear,covers everything for the most part and makes it look easy. I just used his diy on removing a crx dash. Made it easy. I replaced the dash and carpet within 4hrs. Of course i took breaks and what not in the course of things.

@cdrrentals3458

2 жыл бұрын

"Honda Street Garage" (hsg) has good utube videos on the process.

@cdrrentals3458

2 жыл бұрын

kzread.info/dash/bejne/aaCh3LFwf5Tbm8o.html

@JoseContreras-mv5yz

2 жыл бұрын

@@cdrrentals3458 yea ive watched both. Hes done the auto to manual on the ef hatch.

Those vent blockoffs are exactly what ive been wanting numerous 3d printing creators to make!! These look even better cuz they have that texture that the rest of the dash has. Im copying you asap. Hope you dont mind. I wont sell any either. But thank you for the inspiration to DIY😎

@GarageBuiltHondas

2 жыл бұрын

Course not, go for it! I wouldn't have shared if I wanted it to be a secret. Hope you dig em!

Looks great man! I need to clean up my wiring on mine too. That dash and block offs looks awesome too ! 🤙🏾 hopefully I can do the same soon.

damn the dash turned out really nice! Might have to try that on a spare soon.

Absolutely loved the work brother 👏 🍺💯

Looks really dope bro!!!

Nice progress👍

Looks nice man!!!

Yeah man that’s nice 👍🏻 You should spray the Ebrake handle with that stuff 😉

@GarageBuiltHondas

2 жыл бұрын

That's a good idea!

Fascinating, Jon!

@GarageBuiltHondas

2 жыл бұрын

🙏

Looks good.

Them block off pieces for the dash turned out mint!

Looks great man 👍🏻

@GarageBuiltHondas

2 жыл бұрын

👍

Love it! Looks so clean. I feel like this should hold up better than flocking! After you get the sound deadening out, maybe a bed liner floor is in order??? 😀

@GarageBuiltHondas

2 жыл бұрын

Thanks homie! Maybe, goal would be to paint the entire car yellow again but we'll see.

@Busydadgarage717

2 жыл бұрын

@@GarageBuiltHondas you are slowly getting rid of the yellow paint over curse! Way to go!

@GarageBuiltHondas

2 жыл бұрын

I hope so!!

Looks great Jon! Should be a sweet setup when done. Are you planning to film more of the wiring repairs or with the new gauges? Might be good info for reference. ✌️I have to replace coolant lines behind the engine this week, 3 are leaking. Always something right lol

@GarageBuiltHondas

2 жыл бұрын

I wasn't planning on it. Wiring is a pretty slow process that's fine consuming. Might just show updates and the finalized job as I'm working on it one day.

Great video! That is some nice and brilliant work. I may use that bedliner product in an attempt to repair and improve the awful dash in my 2007 Infiniti G35 S. They are known to be of pitiful and inexcusable quality. Have you smelled any off-gassing after re-installing yours?

@GarageBuiltHondas

6 ай бұрын

None. It's held up well too

Hey homie, Was curious how the dash is holding up? I assume very well, but wanted to check with you. May be the way I go with my dash in the 89.

@GarageBuiltHondas

Жыл бұрын

It's fine. 👍

How is that dash doing? I live on the FL line, gets pretty hot here. I was thinking about flocking mine, but this looks easier.

@GarageBuiltHondas

4 ай бұрын

It's perfectly fine to this day!!

Im about to pull apart the dash so i can see which wires are shorted. Dash and eveeything looks awesome i think i want to pull apart everything but maybe keep the radio

@GarageBuiltHondas

2 жыл бұрын

It was a tedious job but worth it now that I'm done.

@levylovits

2 жыл бұрын

Im happy i didnt have to take out the dash today. I found out the screw that hold the rotor in place in the dizzy came undone. Screwed it in and did a couple of other things and we back baby. I think ill be doing something similar next. Definitely want to rip out the heater core i think its leaking in the cabin.

@GarageBuiltHondas

2 жыл бұрын

👍

Man look 👀 great 👍

@GarageBuiltHondas

2 жыл бұрын

Thanks David

What is good to use on the trim molding on the bumpers? Thanks

@GarageBuiltHondas

2 жыл бұрын

kzread.info/dash/bejne/oZqNqMtwlpaXcZc.html

So you just chopped that center console main connection part off?

@GarageBuiltHondas

Жыл бұрын

Yes. It actually unscrews.

So i found that the red/black wire in the dash harness is melted/grounded itself. The hole wire sheath is melted away. As far as i know its a power wire. Multiple connections are connected to this. I think it goes to the dash lightness control unit( the black box that is usually located under the steering column). Is wire fraid itself against the dash so it was cut in half but also melted itself almost everywhere. I think this is due to aftermarket radio install or that the car rubbed itself raw. I seperated the radio wires/speaker juat to see whats messed up. So far i pan on removing the radio wires and any wires that are not necessary. Are there any wires to keep? I think ill keep the dash brightness control so ill fix all wiring for that.

@GarageBuiltHondas

Жыл бұрын

You can remove anything you don't need.

How’s the dash holding up now?

@GarageBuiltHondas

10 ай бұрын

No issues.

How bright are the efbmotorsports headlight ducts?

@GarageBuiltHondas

2 жыл бұрын

Very. Better than OEM with the projectors.

@TealEF90

2 жыл бұрын

@@GarageBuiltHondas awesome since I hit a deer yesterday and destroyed my ef9 headlight , the efb is almost $50 cheaper than another ef9 headlight

Hey man my car seems to lose power on 5th gear would you have any videos that can help me? Great video again man keep it up.

@GarageBuiltHondas

2 жыл бұрын

Check your fuel pressure. Pump might be going bad.

@geovanni6864

2 жыл бұрын

@@GarageBuiltHondas do I just swap the fuel pump? or start from the fuel filter and then the fuel pressure regulator?

@GarageBuiltHondas

2 жыл бұрын

I'd rent a fuel pressure tester and verify it first.

@geovanni6864

2 жыл бұрын

@@GarageBuiltHondas I swapped the fuel filter also went ahead and changed the starter it wound grind every now, and then got new plugs. Took it for a spin around the neighborhood and so far so good.

@GarageBuiltHondas

2 жыл бұрын

👍

Has the paint been holding up well?

@GarageBuiltHondas

Жыл бұрын

Zero issues. Can't imagine it won't, it's made for a truck bed liner.

@TheJohnnyef9

Жыл бұрын

@@GarageBuiltHondas I painted my dash years ago and the paint just flaked off. My second go I did light sanding. Cleaned with alcohol. Used Adhesion Promoter. Painted and cleared and it held up better. Watching you spray it right on felt maybe you would have the same issue.

@GarageBuiltHondas

Жыл бұрын

None so far. If I encounter issues I'll have it up in a video.

Link for the plastic sheeting?

@GarageBuiltHondas

2 жыл бұрын

Link in description of video

@uses0ap

2 жыл бұрын

🙏 thanks. The dash came out great! Keep up the good work

Man I never would have put that pint on the dash, but it looks pretty damn good. Nicely done. Always nice to have a track car to just work on.

@GarageBuiltHondas

2 жыл бұрын

I didn't like the flocking idea, but super happy with the results, and should be strong and hold up well!