Billet Shifter by Jackspania Racing Installed into my 1988 Honda CRX Si
Автокөліктер мен көлік құралдары
Find the shifter here! Use code GarageBuiltHondas and save 10% off of your total purchase.
jackspaniaracing.shop/product...
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Decals available for purchase here - garagebuilthondas.bigcartel.com/
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!
Пікірлер: 105
No one else has a guide this good. Thank you GBH 👍
@GarageBuiltHondas
6 ай бұрын
Thanks for that!
I've been looking at these they look solid. Your definitely a good person to review it. Gonna beat it up and test it for real.
@GarageBuiltHondas
2 жыл бұрын
Thanks for that. It's definitely the plan!
So sweet I still watch these even though I don’t have my crx anymore :( but maybe one day soon I’ll have another one so much fun
@GarageBuiltHondas
2 жыл бұрын
Thanks for still taking a look Christian. I'm sure when the time is right you'll find something good for your lifestyle
Can’t wait to se how it does at the track. I’ve got one of their obd1 Swap harnesses but haven’t installed it yet. Quality looks pretty good for the price.
@GarageBuiltHondas
2 жыл бұрын
👍
This is dope! I would buy this now if I had actually put some miles on my current shifter. Heck, the current shifter is still in the box! Lol.
Looks good Jon definitely nice upgrade for roon49
All good, now the interior cause it's too nice a piece lol...one love ❤️
crazy, i was just looking at buying this...!
best shifter upgrade to the 90s chassis , smooth butter operation , well built ,...only complain is the screw pin holding it in , lock tight it or upgrade the screw and youll be straight ....great vid op
@GarageBuiltHondas
2 жыл бұрын
I used loctite as well. Don't want it backing out.
NO WAY! That looks like it came straight outta 1999 or 2000!
Nice shifter.
I like the Skunk Shift Knob
They also make it in black here - jackspaniaracing.shop/products/billet-b-series-shifter-box-for-honda-acura-type-r-civic-si-b16-b18-b20-crx-irp-1 Gold shifter here - jackspaniaracing.shop/products/billet-eg-ek-dc2-b-series-shifter-box-civic-integra-del-sol-b16-b18-b20-crx-irp?_pos=19&_sid=4cad31647&_ss=r
That shifter looks rad man. Super short throws too, nice!
@GarageBuiltHondas
2 жыл бұрын
Curious to see how it feels at full throttle and speed. 🤔
@wopino
2 жыл бұрын
@@GarageBuiltHondas should feel amazing
Yo this is rad!
On the part where you said you had to notch the center console,you can probably get away with installing some kind of weatherstripping to cover it thus making it look stock still with the leather boot on top.
@GarageBuiltHondas
2 жыл бұрын
True, keep it stock looking still too.
Those bolts are a lifesaver. Everytime someone deletes their ac I take the bolts for that exact reason 🤣
@GarageBuiltHondas
2 жыл бұрын
Lol
Need A Dyno Designs Tightener
@Alexmuchacho916
Жыл бұрын
Any update as far as durometer for the mounts? Looking to put something similar on my car but want to know if 60A is fine or if i should go up to 70-85A
@GarageBuiltHondas
Жыл бұрын
It's recommended at least a 75a or stiffer to avoid falling out of gear from engine movement
Great video great content
@GarageBuiltHondas
6 ай бұрын
Appreciate it
Like the sticks on high-end Golf builds, nice. I can dig it, never seen this kind of design used on Hondas. Not a fan of the button on top for the lockout though tbf.
@jonnymiskatonic
2 жыл бұрын
I rest my hand on top of my shifter when just daily driving, having a button there would bug me.
@GarageBuiltHondas
2 жыл бұрын
I remember the debate about resting your hand on the shifter. Kinda funny how everyone thought it was going to ruin the transmission prematurely. Lol
@JimBrodie
2 жыл бұрын
@@GarageBuiltHondas True. It does have a decent amount of travel to unlock tbf, plus if it's proper heavily sprung in case of lead hand? I don't see why it should be an issue. I just have apprehension due to how i hold when shifting in a car, flat handed from being a biker. =]
Curious about this shifter. How it works, the advantages and disadvantages over a regular shifter.
@kevinthomas6311
2 жыл бұрын
The shifter eliminates one of the shifter linkages, and creates super precise notchy short shifting. It is the best honda shifter on the market
I use the IRP veesion and the 1320 version. I can tell a huge different between the 2. Make sure you have stronger that stock mounts! 85a or strong.
@GarageBuiltHondas
2 жыл бұрын
IRP was probably the original company to design it?
@danielhaynes1642
2 жыл бұрын
@@GarageBuiltHondas it is, and like 3 times the price. Thats why for rhe backup car i tried the 1320.
@mplvt
2 жыл бұрын
From what I read it was designed for the E30 and turned out it would also work for Hondas
@danielhaynes1642
2 жыл бұрын
@@mplvt yeppers, their a german company. The quailty is absolutly amazing and the shifts are crispy
@jermainrmartinez4689
2 жыл бұрын
LATommy had the IRP version on his Green EK a few years back. You are correct he mention how it was German company for BMW shifters but he tried out the B series setup
Awesome man. I've had this thing in my eBay watchlist since they first popped up since I want the IRP shifter so bad. Definitely keep us updated as mine would be for my Street Car. Only thing holding me back is waiting to order the upgraded engine mounts.
@GarageBuiltHondas
2 жыл бұрын
I ended up ordering some 88a bushings for my Hasport mounts just to avoid any issues.
@fordskyline3
2 жыл бұрын
@@GarageBuiltHondas yea I'm on the fence about which ones to get. I wanna stick with Hasport but they only have 70A and huge jump to the next one. Innovative has 75A but I read mixed reviews on those mounts. Build is a 400whp Street car so not sure if I want to go Track Bushings
@GarageBuiltHondas
2 жыл бұрын
I was using the 90a Innovative on my b20 Si and it barely felt different from their lowest durometer. We drive EFs, everyone rattles anyways. Lol
@fordskyline3
2 жыл бұрын
@@GarageBuiltHondas lol honestly that's kinda what I was thinking anyway. My car isn't exactly smooth and quiet. Good to know man. Might step up to the 88A Hasport. Probably be a couple of months before I go that route so I will probably check back in to see how its holding up
Hey jon, which video do you show how to replace the toe link bushings I'm having trouble finding it again?
I've been researching this shifter for a hot minute. Thinking of purchasing the 1320 version. You can utilize an OEM or Aftermarket shift knobs on that version. Im wondering how it would looked paired with a GSR shift knob. I'm currently running a hybrid shifter. It shifts nice but I'm getting this weird up & down play.
@GarageBuiltHondas
2 жыл бұрын
I've seen. That's a gripe I have a little also but I only track this car so it shouldn't be an issue. I was worried about it being hot but I wear gloves at the track and don't think it'll affect it.
@boost_edjamesmathew2168
2 жыл бұрын
I had that up n down issue until I put a brand new honda genuine OEM shift lever m/t ball seat and dust seal kit now I have zero play this shifter also eliminates that issue
Do you think that it would be possible to retain the entire linkage to make the assembly more solid? I accidentally ordered a solid bushing as well and would like to use it.
@GarageBuiltHondas
Жыл бұрын
No. The stabilizer bar held the linkage in place so the ball could rotate. The shifter eliminates the ball.
So all the shift cables will fit and have room for the exhaust? I was worried about heat.
@GarageBuiltHondas
2 жыл бұрын
No different than any other shifter with how the linkage fits.
You don't happen to have a hatch cover or the carpet piece that covers the spare? (In blue)
@GarageBuiltHondas
2 жыл бұрын
Negative
i have an ef, is there anyway to put the center console back on? or is it left like that
@GarageBuiltHondas
Жыл бұрын
I don't think it'll fit.
Do a 1st launch please how love to see if it would pop out of 1st gear
@GarageBuiltHondas
2 жыл бұрын
Once I get the car rolling around in the next few weeks I will.
@backyardbuiltky5645
2 жыл бұрын
@@GarageBuiltHondas alright bro sounds good to me 👍🏾👍🏾👍🏾
Hoping I could get a reply from you, but reading these comments, does the shifter actually come out of gear? I just bought a bull boost similar shifter, worried I’m wasting money on it if it does pop out. I don’t want to upgrade my mounts as it is a daily driver and don’t want all the vibrations. Currently running a circuit x ktuned and would want info before I get rid of my current shifter
@GarageBuiltHondas
8 ай бұрын
Zero issues with decently solid mounts. I'm unsure about the Bullboost one though.
@russeldavid6032
8 ай бұрын
@@GarageBuiltHondas solid shifter mounts or solid engine mounts? Bc I want to avoid getting solid engine mounts
can i ask if i use the oem engine mouting can use this shifter or must need use hard sport mouting ?
@GarageBuiltHondas
6 ай бұрын
It's suggested to use aftermarket mounts. It may slip out of gear with rubber mounts.
Too bad that you don't have an option to delete the button in the center. I have a d series crx and I don't need the lock out function. I'm considering getting this shifter! Better price point over the higher end companies and does the job just as good! I can't wait to see the next review video!
@GarageBuiltHondas
2 жыл бұрын
I'm going to the track this weekend if my truck doesn't break down on me. Lol I plan on making more footage of it!
@matthewscarpetta
2 жыл бұрын
@@GarageBuiltHondas Love to see it in action and a long-term review! it reminds me of the CAE shifter! A friend of mine has one in his MK2 Golf GTI! He says that it's very precise!
i’m looking to get a jackspania shifter for my g35, is it worth it??
@GarageBuiltHondas
10 ай бұрын
Absolutely!
Do you have to press the top button to going to first gear?
@GarageBuiltHondas
Жыл бұрын
No.
Anyone know if this could work on a d series in a crx?
@GarageBuiltHondas
2 жыл бұрын
Yes. 👍
Was that a plm that was in it originally? If so how was it?
@GarageBuiltHondas
Жыл бұрын
It was a Maxpeedingrods. It was fine. Felt like a normal shifter.
Will this fit on my 1990 ef hatch with a d15
@GarageBuiltHondas
Жыл бұрын
Yes
Will it fit a stock b series linkage??
@GarageBuiltHondas
2 жыл бұрын
Yes
🔥🔥🔥🔥😇😉🍻🍺
Will it work on d series?
@GarageBuiltHondas
2 жыл бұрын
Yes!
My tuner said these ruin transmission is this true ?
@GarageBuiltHondas
10 ай бұрын
No idea.
Anyone know if it works with shiftboot
@GarageBuiltHondas
2 ай бұрын
I don't believe so.
Would this work with a d series ef?
@GarageBuiltHondas
2 жыл бұрын
Yes
@eastcoasthydrographics
2 жыл бұрын
@@GarageBuiltHondas thanks Jon
bmw shifter. wish they made it so you can put other shift knobs on.
@omaricato7488
2 жыл бұрын
1320's is designed that way
They have the Jesus clip and a bitch pin on one component.
@GarageBuiltHondas
2 жыл бұрын
Lol
This design is really flawed for 90’s Hondas with solid shift linkages. The stabilizer arm linkage maintains distance between the drivetrain and shifter, making it more like a RWD gearbox linkage. A shifter design that omits that linkage, and then requires stupid crazy stiff engine mounts to keep the car in gear, is just outright poor design. Some fresh bushings and maybe a Tyrannosaur Tightener in place of the shift linkage front knuckle and bitch pin is a much better solution for improved shifting feel.
@GarageBuiltHondas
10 ай бұрын
Maybe you're right, but these feel fantastic for me. And that's on this car and the B EG coupe. kzread.info/dash/bejne/qHWi2clvkaTWgMY.htmlsi=HBzxhSzDcfb-c9pJ
First😎
Worst company. Ask a question and they only reply "don't know"
looks like a cheap IRP knock off.
@GarageBuiltHondas
2 жыл бұрын
It is. Half the price so definitely cheaper.
Hey mate, send u a message on insta. Hope to hear soon from you 👍🏻
@GarageBuiltHondas
2 жыл бұрын
kzread.info/dash/bejne/omaE1rKohruafqg.html