DIY Pooja Mandir

Тәжірибелік нұсқаулар және стиль

If you are looking to build your own Pooja Mandir, I have included all the major steps involved in this video, so that you can make one at home.
Most of the materials I purchased were from Lowes and Home Depot, and the cost was around $600.
Top:
Large Craft Oak Finial (1.75-in x 3.75-in) - 5
EverTrue 4-in x 8-ft White Hard Finished Egg and Dart Crown Moulding - 4
Ornamental Mouldings 1-1/2-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 3/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Gold Ceiling Cup Hooks Self-Tapping Screws
AzKrafts Lot 25 Brass Bells 1.13" H
Middle:
Waddell Ash Traditional End Table Leg (1.375-in x 28-in) - 4
Ornamental 2-1/2-in x 4-ft White Hard Unfinished Chair Rail Moulding - 2
Waddell 5504 3/4 in. x 2-1/4 in. x 48 in. Maple Rail Moulding - 1
Doors and drawers:
Ornamental Mouldings 13/32-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 2-1/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 2
MUXSAM Long Wood Onlays Detail Carved Appliques (2-Pack, 30x6cm/11.9"x2.4")
1/2-in x 2-ft x 4-ft Whitewood Sanded Plywood
Base:
1/2-in x 4-ft x 8-ft Whitewood Sanded Plywood - Cut into 4 pieces (2 x 4)
Ornamental Mouldings 1-in x 8-ft White Hard Unfinished Rope Chair Rail Moulding - For side trim
Maple Bun Feet Coffee Table Leg (2.75-in x 4-in)
Tools used:
ADMIRAL 10 in. 15 Amp Cast Aluminum Table Saw
Kreg Pocket Hole Jig&#174
Kreg #6 x 3/4-in Zinc-Plated Interior Pocket Hole Screws
Kreg #7 x 1-in Zinc-Plated Interior Pocket Hole Screws
Titebond II Premium Wood Glue Yellow, Interior/Exterior Wood Adhesive
Bosch 18-volt Power Drill Tool
CRAFTSMAN 7-1/4-in 9-Amp Single Bevel Compound Miter Saw
IRWIN QUICK-GRIP Assorted Mini One Handed Bar Clamp
Pneumatic 18-Gauge 2-1/8 in. Brad Nailer
6 Gal. Portable Electric Pancake Air Compressor
Minwax Wood Finish Oil-Based Gunstock Semi-Transparent Interior Stain
Minwax Clear Gloss Oil-Based Polyurethane
www.walmart.com/ip/Gold-Rust-...

Пікірлер: 28

  • @sri7336
    @sri73365 ай бұрын

    Thank you for the video. We were able to complete our protect today.

  • @Taruna908
    @Taruna908 Жыл бұрын

    Very very beautiful 💫💫💫 so creative 🙏👌👌👌👌

  • @devarajulubalaji6663
    @devarajulubalaji66632 жыл бұрын

    Excellent work.Finishing is great.

  • @sujathaswaminathan1998
    @sujathaswaminathan19982 жыл бұрын

    Great work 👏 👍 👌

  • @mselvanayakam
    @mselvanayakam2 жыл бұрын

    👏👏👏Very creative workmanship, Thiyagu! The resulting/end product looks awesome! 👌👌👌

  • @dd1531
    @dd1531 Жыл бұрын

    Superb mandapam !!

  • @pvpixelarts
    @pvpixelarts9 күн бұрын

    Amazing. just a quick thing. What is the angle you are cutting the crown moulding at?

  • @chithuvid
    @chithuvid2 жыл бұрын

    Excellent..... 👍

  • @selvannambi4393
    @selvannambi43932 жыл бұрын

    Super cute 👍

  • @sumakreddy8775
    @sumakreddy87752 жыл бұрын

    Super. 👏👏

  • @nishanthm2947
    @nishanthm29472 жыл бұрын

    Fantastic

  • @codewithharish4485
    @codewithharish44852 жыл бұрын

    Very nice 👏👏👏😀😀

  • @pallavivuppala
    @pallavivuppala Жыл бұрын

    Wow

  • @meghakonka753
    @meghakonka753Ай бұрын

    The design looks beautiful, do you make these to sell?

  • @diyprojects957

    @diyprojects957

    Ай бұрын

    No. I did this for my personal use.

  • @mounikareddy9733
    @mounikareddy9733 Жыл бұрын

    Very creative. Can you please mention the instructions you used for nailing?

  • @diyprojects957

    @diyprojects957

    Жыл бұрын

    Thank you. I used Brad nailer with 5/8 in. Brad Nails. You also need an air compressor to use with Brad nailer. Here are the links. Pneumatic 18-Gauge 2-1/8 in. Brad Nailer with CLEAN DRIVE Technology, Tool Bag, and Sample Nails 6 Gal. Portable Electric Pancake Air Compressor

  • @kanchanbarsainya7638
    @kanchanbarsainya76383 ай бұрын

    What angle did you cut the moulding for gopuram?

  • @diyprojects957

    @diyprojects957

    3 ай бұрын

    I cut mouldings in 45 degree angle. The key is, I stacked the moulding against the miter saw wall while cutting. The video at 6:44 shows the cut.

  • @swathirajula5393
    @swathirajula539327 күн бұрын

    can you please let me know what is craft finial? Is it possible To share the product links?

  • @diyprojects957

    @diyprojects957

    27 күн бұрын

    This is the crown on the roof of the mandir. Here is the link. www.lowes.com/pd/Large-Craft-Oak-Finial-1-75-in-x-3-75-in/3559192

  • @subhamchannel-fz3jk
    @subhamchannel-fz3jk9 ай бұрын

    Can you please share the measurement and where to order the parts?

  • @diyprojects957

    @diyprojects957

    9 ай бұрын

    The base length is 48 inches and 20.5 inches wide and the height is 13.5 inches The height from ceiling to bottom is 41.5 inches and the overall height is 58 inches. The parts list is provided in the details just below the video if you expand. Hope this helps.

  • @mamathaennikapati8721
    @mamathaennikapati8721 Жыл бұрын

    Please share tools links

  • @diyprojects957

    @diyprojects957

    Жыл бұрын

    I have added a complete list of tools I used in the detail page. Please click on 'Show more' for details.

  • @radhikakrishna3021
    @radhikakrishna3021 Жыл бұрын

    Hi, can you please share the link for the gold color?

  • @diyprojects957

    @diyprojects957

    Жыл бұрын

    www.walmart.com/ip/Gold-Rust-Oleum-Stops-Rust-Bright-Coat-Metallic-Spray-7710830-11-oz/17011173?athbdg=L1600

  • @vr6273
    @vr627310 ай бұрын

    Very pp

Келесі