Thanks again to SimpliSafe for supporting my channel and sponsoring this video (simplisafe.com/foureyes) Also...if you're interested in watching me come up with and model this piece in (almost) real time - here is a link to that video on my second channel kzread.info/dash/bejne/d3dq0rKndNrRedY.html

@martinaguilar4270

4 жыл бұрын

How are you joining the three boxes? I am almost done building this but I am wondering what is the best way to join these perhaps make it modular and be able to break apart when moving, but sturdy enough when put together

@carorosaleigh6499

3 жыл бұрын

How much did the wood cost

@ddembestephen8059

3 жыл бұрын

Thank you very much, am going to try this today

@CrosshairLunchbox

Жыл бұрын

Hi, the modeling video of this piece is set to private and I cannot view it. I would like to make something remotely similar to this - just two side sets of drawers and no drawers by your feet.

This is awesome! The only thing that I would maybe do different is to put slats in the middle part instead of another platform as mattresses can mold eventually without air circulation

Great build Chris. I love the visual aspect you put in your videos with the drawings. Helps understand everything much better. Great work dude

@Foureyes.Furniture

4 жыл бұрын

Thanks komar. I think so too. It's saved me many times, in terms of being able to convey something that would have otherwise been hard to visualize.

I love how unobtrusive the sponsor sections are in your vids :) You flow nicely from the project to the sponsor and back again, there's no dramatic or jarring pace change that just throws off the aesthetic of the whole video. I end up just waiting through it instead of skipping. I think you just have that kind of calming and gentle voice that's comfortable to listen to :)

@Foureyes.Furniture

4 жыл бұрын

Thank you. Really appreciate that. This one was on the longer side, so I'm happy to hear it kept your attention at the very least :)

@atticatty6878

4 жыл бұрын

@@Foureyes.Furniture It is the linus of maker space!

Hey a quick tip when you used the rputer against a wooden strip you want the round part of the base of the router to touch the fence because (at least with my router) that part is perfectly round. And if you use the flat part it will rock around and you wont get a straight cut. With the round part you can move it around and the cut will still be straight btw. Great video as always keep it up 👍👍

Isn’t every bed a charging station?

@Foureyes.Furniture

4 жыл бұрын

ha...I guess they are. The original charging station :)

@arbitrarystuff1229

4 жыл бұрын

@@Foureyes.Furniture Surely the original was a smooth rock and a soft animal hide.

@Alex-wi1mx

4 жыл бұрын

@@arbitrarystuff1229 Technically still a bed

@trenton8998

4 жыл бұрын

Woah..

@bondjavi

4 жыл бұрын

Giggity Giggity Goo

The best DIY bed with drawers I've seen on any channel. I would really like to see some plans to print with measurements so I can make my own. Such a nice build and video. Best of wishes from Puerto Rico.

@martinaguilar4270

4 жыл бұрын

Subscribe to his patron program and I am sure you'll be able to access

@cianlewis5524

3 жыл бұрын

Can anyone confirm if it’s on patron

exactly what I've been thinking to do for my bed. thank you to make it more clear for me to execute it

I like the fact that your priority is functionality. I also loved the advises, tips, and tricks. Subscribed!

You are still by far my favorite maker youtube videos to watch. Combination of good designs, woodworking skills, presentation, and tongue in cheek humor is unchallenged in my eyes. Keep doin yo' thang!

@Foureyes.Furniture

4 жыл бұрын

Thanks Brandon. Really appreciate that :)

This video helped me solve a problem with a completely unrelated project I have in the planning stages. I’m planning a wooden snake cage with front-opening sliding glass doors, and I could not fit the life of me figure out how I was going to get the doors into precut dado tracks without taking part of the frame apart and reassembling it around the glass doors. Your instruction of making the top track deeper just solved this conundrum. Thank you.

Flat bottom bits - boy you got me there 🤣😂🤣 Not sure if I can ever listen to that normally 😂🤣 Awesome work - DEFINETLY will inspire our new bed!! Thanks 😇

@Foureyes.Furniture

4 жыл бұрын

I couldn't help myself :)

Hi Chris. Nice build. I've made a few similar builds and one advice from me to you, free of changer, would be ventilation holes under the mattress, and plenty of them. Even with a latex core, I've had issues with moisture build up between the warm mattress and the colder plywood. The first layer of glue will stop the plywood from absorbing the moisture.

@wabisabimaker1794

4 жыл бұрын

Hi Chris, great build and just what I have been looking for. I have a Casper mattress and they stress to use slats spaced 4" apart as a mattress frame so that there is air circulation underneath it otherwise you could have mildew problems. I don't know which kind of mattress you have so this isn't feedback on your situation, I'm only thinking of how to adapt your design for my situation. Your content never fails, I love it! Also, those are my fav kicks so far!

Love your sense of humor and your design skills

love your videos! Question - have you ever considered creating a "woodworking vocab roundup" style video? i think it would be great for woodworking newbies to boost our knowledge. especially since your channel and your artform here is so visual itd be great to have a visual glossary so to speak. i ask bc whenever i watch your videos i am confronted with the following: what is the difference between: groove vs. bevel vs. dato vs. domino vs. rabbit vs butterfly vs. etc etc anyhow, keep it up.

Love your work and vey glad to see you growing still with your channel. Definitely inspires me to keep designing and building more...

@Foureyes.Furniture

4 жыл бұрын

Thanks Mitch...appreciate it :)

This video earned you a subscriber. I've been looking for a good video since I want to build my bed. And while I won't use the same design using the ply wood structurally didn't occur to me. So it will same my money when I start.

Awesome video. Really impressed. Love the editing of the clip as well. Well done all round

Nice project Chris! Thanks for sharing the video with us.👌👍😎JP

Espectacular trabajo,y increíbles herramientas

Linens.....n' things. Love it.

The way explained it's really cool thank you.

Awesome design and build. Nicely done!

I didn't even finish this video and I am already beyond impressed. Excellent work, my man. I am never buying a bed box again.

I like those Jordan 1 crimson tints bro 😎

@Foureyes.Furniture

3 жыл бұрын

Thanks man. Me too.

The length was great with me. No reason to worry since it flows nicely and timely.

Chris.... Your Brilliant! It was a pleasure to watch this awsome build!

@Foureyes.Furniture

4 жыл бұрын

Thank you! Glad you enjoyed :)

Love a good puzzle!! Beautiful work😃

Lol dude your humor kills me. Thanks for doing what you do man! Always entertaining.

@Foureyes.Furniture

4 жыл бұрын

Appreciate it man :)

03:40 - Just a small quibble: _never_ write on a piece of wood to label it, with a pen of any kind! A soft pencil is good, and better still is a strip of painter's tape (you can write on _that_ with a Sharpie). I speak from experience when I say that there are few things more frustrating than getting near the end of a project and going to paint, stain or otherwise finish it, only to find that the pen marks keep showing through, no matter how many coats you lay down. Edit: from later shots, it looks like Chris _might_ be using a mechanical pencil rather than a pen, but it's hard to tell. Either way, it's likely to give some the impression that it *is* a pen, and they could follow suit.

They certainly do make the rocking world go around. I like it as is, without any finish. I know you’d have to seal it with some clear to stop it marking up, but I’ve learned to trust in your design decisions. Nice job. 👍🏻

@Foureyes.Furniture

4 жыл бұрын

Thanks! I'll know for sure in a couple months once the rest of the bedroom is complete :)

I need this bed! this bed is absolutely amazing, Awesome job!

The Smart Doorbell Camera has been around since 1957 and 1967. It was first seen in the Whirlpool Miracle Kitchen and the Monsanto Plastic Home of the Future.

Personally, I love the unfinished look. It's light and neutral and keeps the room uncluttered visually.

Lovely piece of furniture. I am planning a similar build for my son just wish I had a nice big work space and tools like you. Nice video.

I seen this video several times and i really like it each time a bit more

Explained very well... 👌🏻

Nice working place, great built 👍🏻

I really like this style of talking about the sponsor

Flawless victory thankyou man love your work from philippines 🤩🤩🤩

Perfect usage of “comprise.” Congrats!

@Foureyes.Furniture

4 жыл бұрын

YES!!!!

Wonderful and every time a new idea

@Foureyes.Furniture

4 жыл бұрын

Thanks! glad you liked it :)

I thoroughly enjoy your personality man! Keep it up.

Linens… and things. Made me lol

@Foureyes.Furniture

4 жыл бұрын

:P - glad . you got a chuckle

Chris has the best sneaker game in DIY.

Nice. I got some good ideas. My son is going to build a bed frame and I really like the drawers on this one. He needs the storage.

"Sleep on it..." Fantastic line!

@Foureyes.Furniture

4 жыл бұрын

:)

Great build as usual!

Your equipments. 🥰🥰🥰 bdw Im 28f and liking this things is taboo in our community.

I love your vids!Amazing builds always r for u!

Home Economics at its Finest 💡💯

I like how you compared the different types of corner clamps in regards of how much time it took you to complete the task. It's interesting that there wasn't much difference between highest cost to lower cost.

@Foureyes.Furniture

4 жыл бұрын

Yeah, they were all pretty darn close to the same. Not sure if any particular model got them the most square. I was happy with all though.

@craigchingren-hamann9700

4 жыл бұрын

I guess if you wanted to make sure you could send the bed frame to my house and I'll check all the angles for you to be sure they're square.

Your space is so cleaned

"I'll just sleep on it." Ha! :-D

@Foureyes.Furniture

4 жыл бұрын

:P

Thanx.....you really hv made a good job...

Methodical! Excellent

no clue howni stumbled on to your channel but im glad. awesome job.

Awesome video as usual. Towards the end when you made the cable organizers I could not help but think that some T track in the top with sliding cable organizer would be cool. Also, that could lead into additional fixtures such as LED lights or hooks etc all sliding and adjustable.

@Foureyes.Furniture

4 жыл бұрын

Workbench / headboard. 😊

Loving the Crimson Tint’s 👌🏻

@Foureyes.Furniture

4 жыл бұрын

Thanks man...me too :)

just listened to the podcast where you were discussing the standard bed comments... so i feel it necessary to remind you that you may bang your shins on the bed! great video as always.

@Foureyes.Furniture

4 жыл бұрын

haha...already did, decided to burn the bed and sleep on the floor until I come up with a design that is impossible to bang shins on. No matter how hard I try.

Another video well done, Chris. Great work. And ... sleep on it.

Look at little Chris tryna shoe off his shoes. Love ya

Amazing 👏👏

I hereby do solemnly swear to attempt to make this bed while wearing my FourEyes T and a pair of Oreo 4s. Thank Chris 😉

@Foureyes.Furniture

4 жыл бұрын

hahah nice. Just keep the sawdust out of the shoes :)

@Alexb72219

3 жыл бұрын

How did it go lol

This is almost exactly the design I did for our king bed...well, not exactly. But the long side boxes for me were broken in half to make assembly and taking them into the room easier. Ours will be drawers all around and ideally solid Walnut that will have a continuous grain on each face, but not face to face... that'd be one massively long glue up. It will also require floating night stands to get to the drawer under your head and I'm excited to design those...want charging,maybe light, and speakers... we'll see. Great video 👍. Also, I thought for sure you'd go with Blum undermount after building your outfeed /assembly table. I can't go back now that I've used them unless they just can't work in a particular application

@Foureyes.Furniture

4 жыл бұрын

At the point that I built this I had never used blum drawer slides. I actually just used them on a project that will come out later this month though. They are kind of hard to wrap my head around still...but they work great. You can definitely see the quality difference :)

@stumptownwoodworks

4 жыл бұрын

@@Foureyes.Furniture yeah that's what I thought too. Trying to get everything square and perfect... seeing the tolerances they put in the catalog...it was overwhelming. Then setting in the drawers for the first time and seeing how much adjustability they have 🤯 it was awesome. Could easily be out of square or have a slightly wavy piece of ply and be fine. Also they can be side or bottom mounted to the box so they work for slide out drawers behind doors too.

"linens....and things" I, too, would've had to add "and things". ;) I chuckled.

I was just thinking in make a platform bed with storage, and this is just what the doctor ordered.

@Foureyes.Furniture

4 жыл бұрын

perfect timing :)

Was holding my breathe for that pun

@Foureyes.Furniture

4 жыл бұрын

I got it in there just at the last minute :)

Shower thought: a bed is a wireless charger for your body 😆

I love his air jordens

Air Salomone! What talent

Those shoes are 🔥🔥

Nice work as always!

@Foureyes.Furniture

4 жыл бұрын

Thanks :)

Good stuff man. Keep it up!

@Foureyes.Furniture

4 жыл бұрын

Thanks Isaac :)

Hu Chris How are you? Your projects are amazing, beautiful as always. Congratulations for you and your channel. Allan from Brazil

@Foureyes.Furniture

4 жыл бұрын

Thanks Allan...really appreciate it :)

Overall, I really like this cool and modern platform bed. The details of explaining the process of making this bed, to me, still somewhat confusing. I didn't have a clear picture in my mind of how you put all of pieces together. It would be helpful if you could shoot more details explaining how everything is put together.

Simply sweet video, just like your translation skills, simply impressive 😁

@Foureyes.Furniture

4 жыл бұрын

I simply appreciate it :)

I have ideas but this is a good basic for them thank you love the video

Awesome job Chris! 😃 👍🏻👊🏻

@Foureyes.Furniture

4 жыл бұрын

Thanks Fred :)

as always a perfect video !!

@Foureyes.Furniture

4 жыл бұрын

Thanks! :)

#1 dude.

@Foureyes.Furniture

4 жыл бұрын

:)

Hello I'm Migs De Jesus I like that bed with wardrobe and charge.

Great build. Ive been thinking of doing this myself

@Foureyes.Furniture

4 жыл бұрын

Nice. You should :)

Agora tupia, serra elétrica, lixadeira, serra tico tico e grampos tudo eu tenho. Este trilho para a sua circular eu conheço mas aqui no Brasil não tem e a gente improvisa com esquadria de alumínio. Abs

Looking good. I wish you have shown more of the "kicker" part, and how it was attached to the rest of the build.

@Foureyes.Furniture

4 жыл бұрын

The base part underneath? It literally just sits on top of it. You could screw it down if you wanted...but there really isn't any need. It's not going anywhere :-)

@RicardoJunqueira

4 жыл бұрын

@@Foureyes.Furniture sweet! Thanks! How tall is it?

Great job~

nice build man

Awesome. Like always!

@Foureyes.Furniture

4 жыл бұрын

Thanks Devin

Hey ! I believe you should elevate your mattress in order to make some airflow underneath and allow it to breath. When we sleep, we sweat and the mattress get humid, so allowing some space underneath prevent mold for both the wooden bed and the mattress. It can increase comfort as well. Also, why are you using plywood ? I started using it to make some shelves, and I feel that that wood isn't very resistant, get scratches easily and does not look nice. I think pine may to an good alternative, but probably more expensive. Best ! Geoffroy

Do you ever struggle with your creativity? Another great one, man!

@Foureyes.Furniture

4 жыл бұрын

sometimes I feel unmotivated...but it comes and goes

@AEXdesignhouse

4 жыл бұрын

@@Foureyes.Furniture So you are human after all haha cuz your work is out of this world!

Best way to start my morning!

@Foureyes.Furniture

4 жыл бұрын

...by thinking about Bed :P

@hilario-balajadia-jr

4 жыл бұрын

Chris Salomone about how much I would want a bed like this!

Um espetáculo está cama. Vc poderia me mandar as medidas das gavetas. A minha mulher se apaixonou tanto pelo seu projeto que vamos tentar fazer uma para nós. Parabéns Vieira Brasil

Hey Chris, I've been watching your videos for quite some time now and have found plenty of inspiration from your videos, both in your projects and in the way you plan and construct. I do have a potentially dumb question; in this video I saw that you used several different circular and track saws (in addition to your table saw). May I ask why so many? Is each one for a different purpose for you? Just curious! Love the videos and the calm aesthetic you have going in them!!

@Foureyes.Furniture

4 жыл бұрын

Hey man...I've gotten this question a lot. I think I might need to make an instagram post about it. In short. Track saw vs Circular Saw usually has to do with length. Full sheet of plywood. I'll use a circular saw with the kreg rip cut attachment (I don't have tracks long enough) cross cut I'll go with a track saw. I'm using two in this video because I was also testing out a new woodpeckers attachment I got for the festool :)

I would like to have those woodpecker tools. Especially the long t-square ruler.

Good job

Chris, I noticed in your sketchup drawing of this platform bed that the top and bottom panels of the big side drawer boxes were *not* rabbited, only the side panels. But in the build you did a stopped rabbit on those top and bottom pieces, so the 1/2 inch back panel was "received" all the way around. What made you change course there? Any reason you wanted the rabbit to go all the way around instead of just being on the two side panels?

Awesome video

This Is Awesome

@Foureyes.Furniture

4 жыл бұрын

Thanks Joel :)

Chris Salomore this is a great video I'm going to build this for me thanks for this amazing channel...I hope my talent show channel can reach as many people one day like your channel reaches everyday....Keep up the amazing work you do....A+A+A+

@Foureyes.Furniture

4 жыл бұрын

Thank you...appreciate it :)

I love your shoes!