Very good video.thanks from France...

@BackDraftBikes

2 ай бұрын

Thanks for watching!

Not sure why you wored this service from the right side of the bike? You know ... the removal of the oil filter is done from the left side of the bike. That does not require removal of any other component (oil cooler line) because you can just pull the filter out with no obstacles.

Hi, I have the same bike as you. Can you tell me where and which model of handlebar mirrors you mounted and if you made any particular changes? Thank you very much ✌️

@BackDraftBikes

12 күн бұрын

I actually didn’t purchase them. They came with the bike so I’m sorry I don’t know.

Awesome video.

@BackDraftBikes

2 ай бұрын

Thanks for the visit

Little recommendation, shake the bike slightly with handle bar and push down and up slightly, got more dirty oil coming out… thank you for the tips.

@BackDraftBikes

2 ай бұрын

Thanks for the tip!

Great video! Does the red ring on the site window spec for full? I put 3.5 litres in it just looks low. No manual either.

@BackDraftBikes

2 ай бұрын

the red ring tells you if the oil level is between low and high respectively. Make sure to run the bike up to temp and shut it off, let it sit for 1 minute on the center stand, and then check, for the most accurate reading.

Can I just use any OBD-II Scanner ??

@BackDraftBikes

Ай бұрын

No, you have to use Motoscan. Generic OBD won't work. Thank you germans.

Why not use BMW Oil? I thought the book says we "must" use the BMW oil only? Please advise thanks

@BackDraftBikes

2 ай бұрын

It is fine, but not available where I am unless ordered thru the internet.

Can you adjust the heated grip settings ect with the MX+ tool?

@BackDraftBikes

4 ай бұрын

Not that I know of, you need the bimmer tool.

Where buy the blue tooth obd link mx+

@BackDraftBikes

4 ай бұрын

If you look in the description, it’s the first link

newer seen people removing oil cooler pipe when changing oil- does it says in the manual that got to be done, or its just you?

@BackDraftBikes

4 ай бұрын

I do not have the service manual, but as an experienced bike mechanic I don't see how you can change the filter without doing it on the second gen. First gen, yes no problem.

will the dealers/stealers see it if you reset service interval yourself? does it void the warranty?

@BackDraftBikes

4 ай бұрын

Yes they can see EVERYTHING you do on the bike. Does it void the warranty? If you are in the US then no, there have been cases that show that a qualified person can maintain their bike (google magnusun-moss) but I always save my receipts and take a picture for good measure.