DIY Murphy Table

Тәжірибелік нұсқаулар және стиль

Here is the cabinet/foldable table I made for my office. I got a new sofa for my office which made me move my workbench to our garage. I needed a good solution to have a table that tucks away and also holds some storage for my crafts. Here is a list of the material with measurements of the pieces I used.
Materials
Total Plywood: 4’ x 8’ (3/4” thickness)
www.homedepot.com/p/18mm-Sand...
Frame
Top: 30” x 8”
Bottom: 30” x 8”
Right Side: 36” x 8”
Left Side: 36” x 8”
Table Top: 31” x 36” (3/4” thickness)
Legs/Base
Top: 24” x 3.5”
Bottom: 24” x 3.5”
Right Side: 36” x 3.5”
Left Side: 36” x 3.5”
Wood Cover: 31” x 36” (1/4” thickness)
www.homedepot.com/p/Sandeply-...
Interior Shelf: 30” x 6.5” (3/4” thickness)
Kreg Pocket Hole Jig
www.homedepot.com/p/Kreg-Pock...
#8 x 1-1/4 in. Square Drive Round Head Zinc Coarse Pocket-Hole Screw
www.homedepot.com/p/Kreg-8-x-...
1-1/16 in. x 12 in. Bright Nickel Continuous Hinge
www.homedepot.com/p/Everbilt-...
Bright Brass Lid Support Left Hand Hinges
www.homedepot.com/p/Everbilt-...
Bright Brass Lid Support Right-Hand Hinges
www.homedepot.com/p/Everbilt-...
Leather Handle
www.ikea.com/us/en/p/oesterna...
LED spotlights
www.ikea.com/us/en/p/ledberg-...
Blog: www.flowersandfolk.com/
Instagram: / flowersandfolk

Пікірлер: 18

  • @Jigglywood
    @Jigglywood4 жыл бұрын

    THANK YOU! I’ve been looking for an easy tutorial on how to do this for so long! And the fact you have everything in the description is so helpful. Hopefully I pull this off so I don’t have to worry about my kitty ruining my supplies anymore.

  • @Mmmatthewo2917
    @Mmmatthewo29172 жыл бұрын

    I’ve watched ever video on KZread about wood Murphy storage cabinets, this was by far the best, thank you

  • @banks412gmailcom
    @banks412gmailcom3 жыл бұрын

    Awesome, awesome job! Great job!

  • @davidiaz007
    @davidiaz0074 жыл бұрын

    That’s awesome! Keep it up! 🙌🏻

  • @stimpsonkayleigh257
    @stimpsonkayleigh2574 жыл бұрын

    This is exactly what I want to make! Thank you so much

  • @Ladylea2000
    @Ladylea20004 жыл бұрын

    Great job, I’m going to try this, thanks

  • @gnr7756
    @gnr77567 ай бұрын

    Thank you so much for this tutorial! I have just finished mine !

  • @kassik
    @kassik2 жыл бұрын

    Amazing DIY, thank you do much for this video!

  • @k.b2457
    @k.b2457 Жыл бұрын

    this was awesome! so helpful

  • @beanerschnitzel794
    @beanerschnitzel79410 ай бұрын

    very nice

  • @robindestasio7563
    @robindestasio75633 жыл бұрын

    This is exactly what I need :) I'm going to try and make it :) I think if I add a couple of pieces of wood to table end and top I will be able to hide the hinges :) My cat gets into everything so I need storage that she can't get into :)

  • @thatoneguy5933
    @thatoneguy5933 Жыл бұрын

    pocket screws are ok but purchasing a 3'8 dowel bit and gluing is the way to go

  • @Jigglywood
    @Jigglywood4 жыл бұрын

    Did you screw directly through the wood you said you’d use to hang it into studs?

  • @dmhboag5882
    @dmhboag5882 Жыл бұрын

    Only thing I would add is glue then screw

  • @williamnelson2298
    @williamnelson22983 жыл бұрын

    Everyone drinks Malt on Monday,, Wine on Thursdays because of the sake on wendsday start our Fridays with Mimosas . NOW what I do on Saturdays makes no sense . So Sundays I go sprint 🏃‍♂️ and all day drink healthy Bloody Mary's with cucumbers 🥒 vodka extra spinach 😋

  • @emilye709
    @emilye7097 ай бұрын

    Do you have the plans for this?

  • @vindicator54
    @vindicator542 жыл бұрын

    Did you finish the plywood edges?

  • @oumchemslogain
    @oumchemslogain3 жыл бұрын

    Hollo my sister, my new friend 🛎👍🌹 Wonderful video, well posted, visit me, I have a new video, please my dear

Келесі