Man, this REALLY gives me some appreciation for how much work a project like this takes. It looks so clean and simple when you're done, but DAMN that's some attention to detail!

I can’t understand why would anyone dislike this video! It was well shot, the build was breathtaking and the end result beautiful. Well done man

@MichaelAlm

3 жыл бұрын

Thank you!

@johngardiner8847

3 жыл бұрын

Araya Woodworks competition and jealousy, nothing more nothing less... great work !

@erhlsexy6824

3 жыл бұрын

It is okay. We can not pls everybody. 🤷‍♀️That's life.. Good job for him though, got inspired to do some diy. 😊

@jakeds84

3 жыл бұрын

@LICKHER&STICKHERINTHEPINK &OTHERPLACES haha same here. Beautiful craftsmanship. But the masks got to go!

@JonHowardPhotos

3 жыл бұрын

IKEA employees. They are dissing the craftsmanship that they’ve annihilated.

I always used to think those types of beds looked horrible when upright. But that looks genuinely luxurious. Space-saving architecture is always so impressive.

My Dad was a Master Carpenter in England, and he used to call that piece of lumber that you used to hold up the soffit when you were working alone, "The Carpenter's Helper." Nice to see that quality craftsmanship is still around!

@jamesmorrison7847

2 жыл бұрын

We call then a "deadman" here in the states.

@SLynch007

Жыл бұрын

So was mine! He just passed away- I got his tools. Watching this, though.. some things like this guy that knows what he’s doing (Like my Dad) gives me a healthy fear of power tools

I watched this at 3 am in the middle of a panic attack, it helped a lot. Thank you for the length and calming tone.

@MichaelAlm

3 жыл бұрын

Glad to hear this helped! I started watching youtube woodworking videos back in 2014 when I was going through tough times, and couldn't sleep. I found Carl Jacobson's wood turning videos which helped me. Nice to hear that my videos can do the same. Take care!!

@1STGeneral

3 жыл бұрын

Panic attack ? Inlaws coming ? The bottom support would limit over half of my inlaws and the night stand would never hold a nights worth of medication and snacks. As a comedian once said his inlaws were on the hefty side and if there's 2 chairs one concrete steel reinforced with a nice cushion and a wicker child's chair their gonna try and sit in the wicker chair

@CoRLex-jh5vx

3 жыл бұрын

@@1STGeneral dude what

@theone-swta

3 жыл бұрын

@@CoRLex-jh5vx He is joking 😂😁🤣

@barbarathomanek3052

3 жыл бұрын

@@MichaelAlm excellent video! Please send contact information if you do this for others.

I'm so glad this project looks complicated and difficult. Custom murphy beds are no joke.

Quick suggestion: put the ceiling board up first, make it go to the frame, then cut the sides panels short and use them as a backup weight distribution system. As a contractor we always put up ceilings before walls.

@DominicDeegan7

2 жыл бұрын

I had this same thought as I was watching. I always find it a good practice to support the ceiling with the walls. Still secure the way he did it, but it's also cleaner to have the seams invisible when looking up.

@dustin6828

2 жыл бұрын

He has some nice tools though. Forget the physics fails, the lack of critical thinking skills, safety protocols etc... disregard too the screws upon screws used for shear. His tools are legit

@cultureoflifemedia4545

2 жыл бұрын

yup...I was thinking the same thing. Otherwise great video! Beautiful

@tme9384

2 жыл бұрын

@@dustin6828, you sound seriously passive/aggressive as you dump a left-handed compliment amongst all those 'green-eyed monster' insults. Well done! My compliments!

@dustin6828

2 жыл бұрын

@@tme9384 I am seriously passive/aggressive. It’s a problem

A perfect addition for either a guest bedroom from an office/study or a studio apartment. Thanks for your clear video and verbal description.

Hey boss, awesome install! Looks amazing! Would like to point out a few things for educational purposes. Not trying to be critical, but I do know my codes. So, you’re not supposed to bury an electrical junction box like you did. Should have also used armour cable instead of the NMD for mechanical protection, especially behind the drawers. The 3-gang box you used was also supposed to be supported from 2 sides (hence that other nail support). Where I’m at, you’re also not supposed to have live plugs inside a cupboard or cabinet unless the door is in the fully open position. This can be done with door switches pretty easily to kill all the power when the unit is closed. Again - really awesome project! But be sure to check local codes. Hopefully everything I mentioned only applies to Canada! All the best! ❤️

@geraldhenrickson7472

3 жыл бұрын

Not everyone is so enamored with the UBC. A clean install is a clean install. Like all regulations it is sometimes better to not know so that the human propensity for denial does not get involved.

@IbraheemMoizoos

3 жыл бұрын

The CEC is designed around the NEC regulations. Everything you mentioned is absolutely code whether this was in Canada or the US. Wonderful worksmanship on the carpentry side, but he definitely should have hired a real electrical contractor to help.

@RobMoreland

2 жыл бұрын

​@@IbraheemMoizoos Or his electrician buddy should have told him everything Matthew mentioned above. Two thumbs up on the overall project, but at least one thumbs down for the electrical. It works well now, but the code violations Matthew pointed out aren't frivolous ones. If there's an electrical issue that requires access to the box he covered, I hope they're able to access it from the other side of the wall. If not, that bed will have to come out to correct the issue.

@TheArtificiallyIntelligent

Жыл бұрын

@@RobMoreland I was surprised his friend is apparently an electrician but let him do all those things. It’s pretty basic electric code. I’m not an electrician nor a contractor and those are some of the first things I learned not to do.

Great to wake up, relax , have coffee and watch this beautiful bed build, instead of watching and reading all the bad news that’s going in the world. Thank you 😊

@DeliaLRuiz

3 жыл бұрын

Just what I thinking!

@sinonwei9045

3 жыл бұрын

Wow so true!

There is a vast difference between watching a contractor and a craftsman.

@culturevulture6292

3 жыл бұрын

His first problem was the timber section he mounted on the roof. He didn't allow for the MDF he was putting on it, and had to replace a 2x4 with a 1x4, instead of making the frame correctly in the first place. Second issue, bedside table didn't fit. Craftsman... Ok.

@IbraheemMoizoos

3 жыл бұрын

Yes a contractor would have hired an actual electrican and followed electrical codes, instead of burying a junction in a wall

@felimuller909

3 жыл бұрын

@@culturevulture6292 "I haven't done a lot of veneering, but I've watched a couple videos...." *screams in German* also the bookshelf on the right: is that screwed to the wall as well? because now the bed is screwed into its side. and the wood really doesn't match

Great work. It's nice to see someone that takes pride in their work is detail oriented and doesn't just throw things together.

The sapwood inlay is beautiful! Great detail & forethought with the design.

I’ve been looking at built ins like this for a long time. This is by far the best I have found! Very well done! Great idea cutting the main pieces out in your shop!

I have been looking for a good guest bedroom solution and watch tons of your other videos. This is perfect! Absolutely love everything you do. Thank you for walking the rest of the world through how to do what you do.

It's very relaxing to watch you work, I love that walnut wood. That would be a great idea to have in hotel bedrooms to change them to meeting rooms.

Excellent project and well done! My only problem, as an electrician, It is against most electrical codes to cover electrical junction boxes. They need to be moved so they are still accessible.

@allergictoglobalists

2 жыл бұрын

I was thinking the same thing. It would fail inspection for sure. People don't think about issues down the road. I've done lots of remodels and when the carpenters open up walls I find hidden junctions all the time.

@ellowell8160

2 жыл бұрын

Why exactly? Curious

@peterclark727

2 жыл бұрын

@@ellowell8160 According to all electrical codes that I am familiar with (and common sense) boxes with junctions must be accessible after the job is complete to allow for repairs later on if required. A loose connection in a box buried behind finished walls is a definite fire/life/ safety hazard and a definite no-no. Don't get me wrong the project looks great. I would just find another way to run the wiring from a professional point of view.

@IgorRockt

2 жыл бұрын

@@peterclark727 ​ Are you talking about the former outlet on the right side? Because the other one on the left side (the one they connected the LED lights and the new outlet to) is still accessible as far as I can see, since you simply can take out the drawers if needed to work on it (see 15:28, where you can see the box with the side table installed, but the drawers not yet put in).

@peterclark727

2 жыл бұрын

@@IgorRockt At the 14:40 mark of the video he installs the back panel and covers the plug box (now a Junction Box) making it inaccessible in the future. This is a cool and well done project and I admire his efforts and results. I have had an Electrician's License for 34 years and I have never buried a Junction box because it's against code.

You are a true craftsman. That’s awesome, well done.

Michael- Hi again ! - A quick comment: The Narration overlay is PERFECT in that it helps to communicate planning, reasons for choices, and thoughts as the build progresses. Something like this _really_ separates the amateurs from those who really _understand_ the importance of communication to the success of those wanting to really understand their (your) work. Thanks ! - C.

This is beautiful! I wish I had this in my 3 bedroom apartment. Your workmanship is so precise. I appreciate your care in the details!

What a fantastic job you’ve made of this ‘refit’ for the room. I love Murphy Beds, but you’ve taken this to a whole new level...WOW!

This is the nicest Murphy bed build I've seen to date. Thank you. I'm nowhere near your level of craftsmanship, but I'll be building my own MB in the coming weeks. This is an inspiration!

Hello Michael, Well I watched this build again today and picked up another detail you added. I really like the bevel you added around the door hardware. I know it is a small detail but really adds to the quality of this build. Very professional throughout!

Absolutely fantastic build. Anyone would be proud to have this in their spare room.

@Jacob_Rady

Жыл бұрын

Hi, you still on KZread? 1yr later

Four daughters, oh why didn’t one bring home a handy carpenter! I admire your skills.

@ummuhaseem1530

3 жыл бұрын

😂

Now I know why Murphy beds are so expensive. Impressive!

What a sense of accomplishment you must get after each job. Part mathematics, part artwork. I’m envious of your talent.

Best most efficient Murphy bed tutorial I've seen. Nice job. Seemed at times to be overkill, but the overall verdict was magnificent. Making my own version of the Murphy bed in a very low budget arena. Thanks for sharing... Oh really loved the side tables and the choice of woods you used...

Honestly. A solid video of craftsmanship, articulated clearly, and creative. Keep it up

This was incredible. Thank you for sharing so much detail of the working on site. You rarely see this level of detail for this sort of speciality situation. Learned a good bit!

I appreciate the extra attention you take to make it perfect. Well done! Looks pretty.

Thoroughly appreciate the music snaps/drums matching up with the nail gun trigger pulls. Mmnph! So good! 👌🏽👍🏽

Gorgeous, and… Oh, the finished details! Dying of envy.

Completely blown over. This Murphy bed is so gorgeous I would never hide it away!

@randystalcup1248

3 жыл бұрын

Agreed

@samerm8657

3 жыл бұрын

That's missing the point of a murphy bed.

Thanks. So-o many new tools. As a boy, I watched my grandfather, a cabinet maker, make custom cabinets for so many homes around here. I have many of the old metal corner and similar tools but the newer tools and gadgets are amazing.

Outstanding video and workmanship. You are a great communicator - clear and concise. Loved the final product and the space in the matching bedside table. These Murphy beds are such a smart way to add sleeping accommodations to a spare room while leaving the flexibility to use the room as an office or living area. Fantastic job 👍🏻

Love the attention to detail. Nice to see actual craftsmanship.

Excellent, well thought out, well presented, well edited video. Besides being an expert woodworker, you are an excellent presenter. I designed and built my own Murphy bed into an existing bedroom closet and I went through many of the same steps you took. I did not use a kit, I built the bed frame, designed my own hinge system, and sourced the gas piston struts from a boat supply outlet. When the closet doors are closed you cannot even tell it's there.

This makes me want a murphy bed, even though I don't need one. Beautiful work. The reveals were spot on.

Very simplistic, excellent build quality, and, excellent option for keeping clutter off the bed, great video.

You, my friend are a true artisan .... I have never seen such perfection in a job, nor a more engaging vid and I have a very short attention span! .... as a DIY guy, totally inspirational ... well done!

@SnowHarp

3 жыл бұрын

you said it perfectly.

I love that bed, I have a Rockler kit I've been waiting to install. More inspiration!

@darinnetherland3466

3 жыл бұрын

brian hornby this kit looked a lot easier then the rockler kit. I did one myself and was disappointed with many thins, including the very warped metal pieces for the bed frame. Unfortunately for me I waited nearly a year to install it and couldn’t return it. Luckily I have several 50” parallel clamps that helped me “persuade” the frame into place for assembly.

Absolutely perfect craftsmanship. So impressive. U will most likely go down as the guy who single-handedly brought back murphy beds. Thank u for sharing,

I’m a carpenter and my boss and I recently installed our first MB…. Ours was quite similar but I believe you have us topped. Excellent job! This was a very thorough well documented piece of work.

I'm always amazed when I see home build videos especially those that are so proud of their "tiny" homes that people are not using, or even thinking of using, a Murphy bed. A bed eats up so much real estate on the floor that using a Murphy bed makes so much sense especially in a tiny home. This was a BEAUTIFUL job! All the tiny details are what make it so special, well done! 👍

@TheJensPeeters

3 жыл бұрын

I mean tiny homes often have a second floor over the bathroom for the bed, which is more comfortable than having it in your general living space. It's also a pain in the ass to put it up and down every day and on that floor you don't have the ceiling height to install a murphy bed

@Lawrence330

3 жыл бұрын

@@TheJensPeeters You could do a side-opening murphy-style bed. Many Navy ships have beds like this, my frigate's XO had a "guest bed" in his stateroom that folded out to be an upper bunk over his bed.

@zacdredge3859

3 жыл бұрын

Well most tiny houses have lofts; they're utilising volume or vertical space for the bed rather than floorspace. I do agree though that some make a floor level bedroom in a way that's not really needed, but others use Murphy's, counterweighted drop-down beds or converting couches(the latter of which a lot tiny's have as well as a loft bed so they can host if need be). I'd say it's a minority that spend floor space on a dedicated bedroom and even then that's most often couples with kids who want their 'retreat'. My own plan is to go with a built-in couch that has a ratcheting mechanism to go flat and that whole upper section is on a track to move outwards from the wall. If it's my primary bed rather than for a guest I want the converting mechanism to be really smooth and effortless and this way it's a single motion. Also thinking I'll make my own mattress from layering foam densities to make it comfy but flexible enough to fold(maybe I score the densest piece at the bottom, there's some trial and error involved).

@fiix7026

2 жыл бұрын

Murphy beds are only effective when there are 2 user scenarios implemented in the floor space. E.g. a fold away homeoffice that normally uses the real estate. This usually is not implemented and the free space is not used effectively.

Ah- maze - ing. I have a husband who’s furniture/art is sold in galleries. I watch his meticulous work all the time. BRAVO to you for being a fanatical detail man. I am impressed at the design of the bedside table.

Truly amazing craftsmanship, Michael! It's mesmerizing to watch your projects.

I absolutely love the way you describe the significant smaller details! I also love the kid playing Fortnite in the background😂 9:12

That's absolutely beautiful. I admire your precision. I do have one question... Didn't your electrician friend tell you that it's a code violation to cover up electrical junction boxes?

@peggyt1243

3 жыл бұрын

I noticed that too. Actually there are two covered junction boxes.

@raphaelking4183

3 жыл бұрын

I had to look to see if anybody else noticed that he covered up two junction boxes. That's a no no.

Wow! Lovely workmanship, professionalism and creative design skills. It was a real pleasure to watch this.

I think where I decided I really like this guy was when he transitioned from the Festool track saw (precision required) to a Ryobi jig saw (notoriously imprecise). Nice work on this project Michael! Hoping to build something similar in our basement soon.

This makes me miss building furniture with my dad. 🥰

There was a ton of interesting detail in this piece and I’ve grown my woodworking vocabulary just by watching this! As always, great stuff Michael! 😄😄😄

@MichaelAlm

3 жыл бұрын

Thanks Kat!

This is the neatest design of any transformer furniture I have ever seen and I been obsessed for quite a bit! Fantastic job love it!!

Nice work! If you use a control line across the front you can square back and set your framing square to finish face. It's just another cross reference so you can move forward with confidence.

I really have to say I want to do something like this with my bed. I don't need the room but I love the neat look of a room like this where you can have an office there and then turn it into a bedroom in just a few secs.

@BendeMark

2 жыл бұрын

Same here, trying to convince wife that things like bed, tv and sinks should ‘disappear’ when not in use. Just keeps the place clean and gives extra space to live in.

Absolutely beautiful! It's modern, simple ❤

Beautiful job👍👍. I myself would never have the patience to build that. Good thing there’s people like you that do.

Man, this is gorgeous!!! It is amazing to watch an expert work at their craft. KUDOS!

Beautiful workmanship. As suggested by another viewer, covering an electrical junction box and making it non-accessible is against National code.

Best part: Explaining how to correct normal glitches 😁Tks!

The festool is amazing 👍👍👍

Amazing work!! What talent. Thanks for sharing. Take care, stay safe, and God Bless.

Beautiful craftsmanship and attention to detail! Very impressed with your design and how the whole bed assembly came together. Excellent work!

@Westofhearts7

2 жыл бұрын

Yes just awesome.

That was an amazing job.. The filming was spot on. You had my interest all the way through. I am not a woodworker but my father was a great craftsman. My parents were from the era of why buy it, when you can make it. My dad would decide on building shelves and cupboards, come in with his tape measure (always a roll up behind his ear) go back to his work shop and, hey presto in a few days there was a made to measure unit done - like you had bought if from a shop. You seem to have that same quality; the vision to make things work and look beautiful. Thank you for sharing

That walnut is gorgeous. I like the light walnut and purple but the dark stuff is the best.

Nice to see an actual quality, engineered build.

I appreciate the fact that he get someone professional to work on the electrical thing, that is so professional of him. "To know what we know is what we know and that we do not know what we do not know. That is true knowledge." - forgot the author of this quote. ✌️

@rawyin

3 жыл бұрын

Yeah. That was the only part that was badly screwed up. :P Craftsmanship is great despite the table snafu.

@jcd6737

Жыл бұрын

@@rawyin Yep - major code violation covering up that outlet box.

Aside from your awesome builds and artistic taste in design, I really like your background music especially how you isolate the last parts of your build music :)

@MichaelAlm

3 жыл бұрын

Thank you!

Wow! I wish my skills were half as good as this guy! I built my own coffee table, nightstand, headboard and desk but that's about the best I can do. This is a cool project. I have a friend who is wanting to build a Murphy Bed into his office so I'll pass this on to him.

To me the best part is all the attention to detail. I think that's what separate you from all the rest. Well done man.

I wonder how much you charged the client for this. This is so well executed.. Great job! Would love to have this done at my house

@thejoshthat

Жыл бұрын

I'd guess $7,000

I notice the ear protectors you are wearing, good idea!!! Hearing is very easily damaged around power tools.

The most well thought out design. Absolutely love this video and will be the criteria for my Murphy bed. I would love to hire you!

Excellent craftsmanship. Thanks for being so generous.

Love the shirt (Laura Kampf). I also love the project. This is very inspirational. Keep up the good work.

This turned out fantastic. I know you were smiling a little during voice-over, but I suspect you were hurting on the inside when the dresser and the chisel became frenemies; there were a couple of painful decisions to have made I think. Anyway, great results as always and great audio too. Thank you for sharing.

@MichaelAlm

3 жыл бұрын

Thanks! Yeah, that felt very wrong. 😬

@rd6203

3 жыл бұрын

@@MichaelAlm I'd have cussed a lot and procrastinated for as long as humanly possible, then berated myself for days 😓 It is an absolutely lovely little table

I’m very glad to find such a nice piece of art worth. Congratulations! You are really a wonderful wood worker.

I'm very impressed! Very nice looking built-in bed and great construction methods!

You should look up the code on hiding electrical junction boxes. Thats a big no go.

@stevecuthbert8856

3 жыл бұрын

You are correct about not hiding a junction box but that was an old outlet box not a junction box. Also it had a blank metal plate underneath the headboard so it probably was okay to do. He probably should have removed the wires but maybe the remaining outlet was fed from that. I'm not an electrician so feel free to correct me if I'm wrong.

@MichaelAlm

3 жыл бұрын

Yeah, It wasn’t a J box. Just an old outlet.

@Chau083

3 жыл бұрын

When you say an old outlet, do you mean that it is no longer live, or that it's no longer being used? Every light Fixture, switch, outlet, etc, is a junction. If there is still power there that was a big code violation. You could have simply cut a hole for the receptacle through the panel you installed and mounted the cover plate to that.

@MichaelAlm

3 жыл бұрын

We killed the power to it.

@binnsbrian

3 жыл бұрын

@@MichaelAlm Nice save.

That Murphy bed is gorgeous! I also like the simple design on the outside, painted to match the room.

I love the design and I commend you on your attention to detail, great workmanship and good job.

Beautiful I have been looking at Murphy beds 👍🏻

Awesome build! The next time you veneer something, look up backing veneer. A panel can become horribly twisted/bowed with veneer on just one side. You can use paper of the same thickness as backing veneer.

@steves2880

4 ай бұрын

Definitely also use dowel material instead of splintery square sticks of plywood as spacers between your veneer and your piece. Also round off the edges of your burnishing board so you don't damage your veneer surface and better yet get a roller tool. You need to apply a minimum of 20lbs per square inch to ensure proper adhesion. Trimming off excess veneer around the edges is best achieved with a steady downward stroke of a sharp blade, starting from above the finished surface and cutting downward along the edge. That way you avoid the risk of splintering your corner edge and of damaging the surface of your veneer when you set the weight of your piece on it. That stroke takes practice. A more reliable technique is to trim off excess to within a sixteenth of an inch with a trim router and then to lightly sand the joint flush by hand with a sanding block of 220 grit finish sanding paper.

I love how Americans make home renovation seem like an everyday task because your houses are practically made of paper. And I hate I can't do the same in this concrete fortresses we have in my country, at least effortlessly.

@Gs-rg2vo

2 жыл бұрын

Same 😭

Great craftsmanship and video editing. Thanks for all the extra tips and tricks you shared!

Very professionally done! Who wouldn't want this Murphy bed and side tables? I would!

Simly the best!!!, well explained, detailed and a well done job bro, greetings from DOmincian Republic, always learning a lot from your videos. thanks for sharing! God bless the work of your hands!

@MichaelAlm

3 жыл бұрын

Thank you! Glad you enjoyed it

@wendolyABaez

3 жыл бұрын

@@MichaelAlm You're very welcome! May God bless you and your family! thanks again!

Absolutely STUNNING!!! You do amazing work

Beautiful job. So much precision and detail.

The attention to detail is fantastic. Love the clean work.

This was amazing to watch. I found it particularly interesting because about a month ago I designed a floating platform bed frame with a walnut veneered plywood headboard, with mitered edges to feign a larger slab. An added design element was a sun burst pattern on the headboard using a router to be filled with black epoxy. This is a pretty similar design that validated my amateur woodworking anxiety! Thank you for sharing and keep up the great work. I did have a question that I hope you're willing to answer. Although I'm only just starting woodworking projects and filling my own home with fine furniture, I hope and intend to eventually offer my services to clients. My question is, how do you go about pricing something like this? If you could impart any knowledge from this particular project I would be incredibly grateful. Thanks again, and keep on keeping on!

@MichaelAlm

3 жыл бұрын

Pricing is a big subject, and I’ve been working on it for a while. I usually design in sketchup, break down all the material cost I can think of. Add 15% for any unforeseen expenses, then break down the build in terms of hours. I add 10% more hours in case of issues, and add it up. Your hourly rate depends on a lot of factors, where you live/ skill level. I increase my hourly every year. When I started I was charging $50/hr and quickly realized for the kind of work I was doing I was the cheapest game in town. Make sure you get a contract and at least %50 up front before you begin work.

@SteveMcKeon

3 жыл бұрын

@@MichaelAlm I thought you might be interested in seeing the final product! Was far more challenging to build that I expected. Mistakes were made, and lessons were learned. :) ibb.co/QDcFW87

Finished project: "What do you think, honey?" Wife: "It's beautiful, but could you move the bookcase?

@zero_day_virus

3 жыл бұрын

Wow, that would be a typical thing my Mom would say to my Dad LMAO

@byronferron5917

2 жыл бұрын

Aqa

@jimb9369

2 жыл бұрын

My wife would have something like, I changed my mind, I want this in the other room.

@dreamscott5913

2 жыл бұрын

The bookcase is taking away from the bed otherwise; he did an outstanding job

Wow. Thats nice. Great use of space. It gets me thinking about more projects.

You are amazing. Totally enjoyed watching the build. It's absolutely beautiful. Thanks for sharing.

Super clean!! 🤙🏻🤙🏻

@taylorbritt499

3 жыл бұрын

SUPER PRO 😂

@jacobvance429

3 жыл бұрын

what’s the finish?

@lightboxstudioevents4811

2 жыл бұрын

I like your work

This really turned out beautifully! I do need to point out that, legally, you can't bury that electrical box behind a glued panel without access to it.

@JWW187

3 жыл бұрын

Yeah that was my thought as well.

@krehbein

3 жыл бұрын

You may be right, and in this case I wouldn’t care if it was my project, but why is it different then wiring behind drywall?

@JWW187

3 жыл бұрын

@@krehbein Intrinsically there's not much difference in reality. There's a very small chance of a short-circuit, or fire hazard in a box. Might be capped ok, but pests, age, or vibration can cause an issue over time. Where as an unbroken shielded wire won't have that issue. If its left "exposed" with a cover on it then your smoke detectors will pick up the fire much sooner. Potentially saving the whole house from going up, and any casualties/fatalities.

Thank you for the video, Michael. I enjoy videos like yours, they are very educational. Another thing I enjoy are the comments. Most comments are not to criticize your work, but to identify things that we as your viewers can learn from. Once again, thank you for your great work.

My friend, this is extremely impressive! The detail is impeccable! The added line to the side table and head board though. Love it!

My heart was bleeding when you were screwing in into that gorgeous bookcase :-(

@MichaelAlm

3 жыл бұрын

It had to be done 🤷🏼‍♂️

@MrJohny74

3 жыл бұрын

Me too. Another thing - gluing on the walls. You have to reconstruct the while room once you get rid of the bed in the future. Sustainability does not look like this.

@sekritdokumint9326

3 жыл бұрын

This is literally like the most basic cheap and unimpressive bookcase i have ever seen

@balkeep

3 жыл бұрын

@@sekritdokumint9326 well, not really. You can argue on design but it's at least solid wood, and pretty thick one, so it's nowhere near cheap compared to miriads of mdf and particle board ones.

@sekritdokumint9326

3 жыл бұрын

@@balkeep As a designer/carpenter i can safely say its not impressive, and in fact looks cheap. Propably is mostly hollow on the inside.