Great vid, great build. Excellent way to show that it doesn't take expensive tools or a custom workshop to make a complex piece. I didn't mind the music, unlike some others, but to each their own. Keep building and keep growing your skills!

@diamondintherough._2777

3 жыл бұрын

Thank you so much!

@recyclespinning9839

3 жыл бұрын

Ha, I see about at least $800 in tools and I bet she learned working with her dad...

@elijahmcstotts2871

3 жыл бұрын

@@recyclespinning9839 So I rewatched the video and made a tool list. Assuming she bought everything new, bought each tool individually, and didn't shop for sales? Then yes, $800 would be pretty accurate. Maybe even a little low. But I have almost all the same tools that she used in this build and I paid between $200 and $300 for them. I bought my miter saw used for $75, my circular saw used for $25. My drill and impact driver on sale for $100 as a combo pack. On sale my orbital sander was about $50. My router was thrown in for free when I bought my table saw (that I only paid $50 for, both used). You can get a good corded brad nailer for $20, new. From there, the clamps, the square, the pliers, and the tape measure are all fairly inexpensive. But if you're smart about it, you can build a tool collection on a budget. I've got a full shop's worth of tools for very little. Also, you say she was probably taught wood working by her dad. As if that's a bad thing? However she learned, she's still got talent and definitely needs to keep building. I, for one, am looking forward to seeing more projects from her.

@recyclespinning9839

3 жыл бұрын

@@elijahmcstotts2871 I agree , it requires skills , just like a college degee requires time, so do those skills. Not to mention those tools are not for beginners nor a beginner project. Just saying .. And yes she should give props to who , or where she learned them by...

@MusicXxLoverXx13

3 жыл бұрын

@@recyclespinning9839 does every male Carpenter need to start giving props to where they learned their trade? Should everyone start stating who taught them what they know? Or just her since she's a woman doing it on her own? Common sense says she learned it from someone/ somewhere ( just like everyone does), where and who is irrelevant to this video.

Young lady. I've watched countless videos on murphy bed builds and must say, your's is by far the easiest and informative to follow along. Great job.

@brokeminimalistmama2341

2 жыл бұрын

Same couldn't find a better one than this!

@tywanasutton1640

2 жыл бұрын

I agree! This is amazing and I will be doing this when we move as my daughter has been begging for a Murphy bed!

@Vera-dc7my

Жыл бұрын

True

@lightwarrior432

Жыл бұрын

@@tywanasutton1640Update?! 😃

@noehmedina4705

Жыл бұрын

🤣🤣🤣🤣 cuddie @Chris Chase got jokes ``young lady" 🤔🤨🧐😂😂😂😂

I love that you have all these tools and your daughter is coming in and out watching her powerful strong Mom building something amazing. Good job.

@diamondintherough._2777

3 жыл бұрын

That’s not my daughter but yes I’m trying to teach her too!

@cindywagner4623

3 жыл бұрын

@@diamondintherough._2777 any daughter we can teach, show, inspire is our daughter. Strong, capable, confident women are the best teachers. She’ll not forget your determination not only to make this functional bed frame but to make it look beautiful. Again, good job. And, you did not chase her away. 🙏

@diamondintherough._2777

3 жыл бұрын

@@cindywagner4623 wow what a beautiful comment. That honestly made my day. Thank you!!🥰🥰

Holy cow that’s by far the best looking Murphy bed I’ve seen on KZread. And thanks for the tutorial on how to do it without spending a ton on hardware!!

Awesome work! Makes my heart so happy to see young women “getting things done” from an much older diy’er woman 🎖 🥇🦋

You go, girl! This is awesome! As a fellow female wood-worker, I love to see others like me creating and killing it! Keep it up!

@jackdaniels2905

3 жыл бұрын

Love them female wood-workers.

@Mira-jj6du

2 жыл бұрын

🙋🏻‍♀️ same!! My boys keep fighting over the “big” room so I’m making my oldest a Murphy bed. Then he’ll have all the space he wants to play his Occulus and sleep in there. I once had a man build one for a different home years ago and he charged $2000. I was thinking yea right I won’t do that again!

@stephaniem895

Жыл бұрын

I want to learn wood working so bad and have no idea where to begin. Making a murphey bed is one of the projects I want to learn.

@thibodoux

Жыл бұрын

@@stephaniem895 videos like these and Anna white’s website and/or her book! Just know that when you build with 2x4’s “they really ain’t straight!” Ha!ha! You’ll make mistakes, but you’ll learn from them. With Anna, you start out with simple tools and simple projects but those projects are still very nice and helpful around the house!

As someone who does a lot of woodworking, I'm impressed you did this by "eye" without any plans. I like the idea of the swivels as the mechanism. So much easier and clever than the "professional" types. I was also impressed by the detail you went through when assembling. Well done!

“If you’re not rich, you have to be creative” and I’m seeing a lot of creativity here. I love that this is done with probably a cell phone, on a cheap tripod, on a shaky deck. It gets rid of all of the excuses people have when trying something new. Absolutely LOVE IT.

Girl, YOUR SKILLS PASSION ARE AMAZING!!!

Love it. My wife has been dying to have a murphy bed for years. But ... that music though.

@diamondintherough._2777

3 жыл бұрын

Check out the build plans in the description.

@katieb1836

2 ай бұрын

Yes, music is so terrible, but great project

The professional Murphy Bed hardware kits have a spring tension mechanism, which allows you to lift and store the bed with one finger effort. The 'swivel plate mechanism' shown here is a great alternative for a bed that is used on a rare occasion for guests as long as you are strong enough to lift the end of the bed up to the wall. Perfect for a home office room that needs to double as a guest room on occasion.

@simonspoke

Жыл бұрын

The spring tension is also a safety feature so the bed doesn't fall down hard and kill someone underneath!

@Just..Me..

Жыл бұрын

Nice that someone explained why this mechanism was used. Because it’s important and the builder skipped right over that part.

@chrisgraham2904

Жыл бұрын

@@simonspoke True, although a latching/locking mechanism would be an easy and inexpensive addition.

@anthonyhiscox

Жыл бұрын

@@chrisgraham2904 It's not just the latching, it reduces the speed that it falls at. So it's like opening the lift gate on a truck where the hydraulics control the speed it opens at. If you had a guest open this and they lost control and a child was underneath it they would be in serious trouble. Not saying don't do it, just that's part of the reason murphy hardware costs so much -- and it's a great reason.

@anthonyhiscox

Жыл бұрын

@@simonspoke I was looking for this comment, there's a reason it costs so much and it's not just convenience or greed.

Didn't expect this to come up, but watched to the end. My partner bought me my own drill for my birthday, and I have access to a lot of equipment. You're my hero. I want to make things!

You could probably have the music at the same level as your voice, when it plays on its own. The difference is like "going to a commercial" on cable. Good on you for getting the bigger cuts done at home Depot. If they mess up the cuts you get new pieces. Easier to transport cut pieces, and it makes a project more accessible.

You are one handy-lady. I marveled at the precision of cutting those slanted pieces you used for design. Being a handy-lady myself I know this took some hardwork. I give it to you girl. You've gained an IG follower.💪

@diamondintherough._2777

3 жыл бұрын

Thank you soo much I appreciate it!

@elizabethhazzard3251

3 жыл бұрын

Twin Murphy bed for tiny house

WELL DONE... I have to admit, I cried a little when you painted the wood. I will be using a similar technique for my build. Thanks so much for the hinge idea... Swivels = Genius.

Your presentation was impressive ... You made me feel like I could actually feel secure with myself to attempt to build a murphy bed. You are a "Great instructor"!

Great job. Budget is just as important as any other aspect of a project. You did a wonderful job and I’m encouraged that there are young women interested in carpentry. I have been doing woodworking for sixty years and never grow tired of the next project. Congrats!

this is really great. I followed these directions with a few modifications people may find useful. 1. i made the frame panels from three horizontal panels instead of two vertical panels. Then cut notches in the middle panel to hold a solid core wood shelf (x2). I bought a 4'x24" hardwood butcher block for the shelves, but one could probably rip a 2x12 to do the trick.I added a second 3/4" x 4" piece of ply to the back of the cutout so the shelf/legs get 1-1/2" of reinforcement. We'll see if it holds. Then for the hinge, I wasn't in love with the hardware, so because there's more than 1-1/2" difference between the cabinet and the bedframe, I used a 1-1/4" wood dowel for the hinge. I reinforced the cabinet and bed frame with a second 3/4" piece of plywood, drilled a 1-1/4" hole and ran 4" pieces of dowel through.

@cjeharnish

Жыл бұрын

I can't seem to add photos but I have some if people are interested.

@stephaniegarvin4142

10 ай бұрын

@@cjeharnish I would be interested to see the photos, especially of the dowel system.

You go girl! I am truly impressed! I’ve been wanting a murphy bed but refuse to spend thousands of dollars and wondered how I could make one🤔 I will dare to attempt this project! Thank you! Oh how could I forget..I loved the finished detail and floating shelves on the back end of the bed! You rock! God bless your endeavors!🦋

I love it! I've been thinking about doing a Murphy Bed for a long time. I like the simplicity of yours. I also like that the "shelves" are the actual legs of the bed. If I make this, I will glue books on the shelves to make it look like they are real shelves. Thanks for the video, Diamond.

Not beginner, this took skill, forethought and lots of accurate measuring! Great job! Inspiring, thank you for sharing.

@kathleendavis2008

Жыл бұрын

My exact thoughts also!

Nice build. I really like the herringbone pattern. That turned out great. I had to laugh at myself when you installed the T-nut. I have been doing that wrong for years. I have always driven them in with a hammer. Your way is much better. Thanks for teaching an old man something new.

@diamondintherough._2777

3 жыл бұрын

That’s how I did it at first too and I thought the wood would break but I found a great tutorial online. Glad I could share the knowledge!

@WookyLinuxer

Жыл бұрын

@@diamondintherough._2777 here's another one that have been hammering t-nuts all my life. Really helpful tip.

This is a good way to make a Murphy Bed with out high cost , this inspired me to build one off of your build good job, TY

I’m impressed how smart and courageous this young lady is to undertake such a difficult project which many people that have experience in woodworking will be hesitant! Great job and very informative. Thanks

this is EXACTLY what I need in my guest room !! it is simple, but gorgeous !! I LOVE LOVE LOVE it !!! Congratulations on an amazing build, great video and getting the room back when you need it !!

Kudos to you young lady! I am glad to see someone young that can do things for themselves. You did a beautiful job on the bed.

Whew you did a great job what an amazing bed you should be very Proud of yourself and you have inspired so many women out there to start their own projects .

@diamondintherough._2777

3 жыл бұрын

Thank you!

Easily the best Murphy bed design video on KZread, Thank you so much for sharing!

Well done! Expertly built, narrated, and produced. Thanks for your wisdom and hard work.

Nice work! For my personal taste I would have left the diagonal wood slats their natural color instead of painting them, but that's more of a decor item. Great job!

this is the best video i've seein on this subject im 67 live in a small place need one of this build hardware is to expensive .. no easy way to do it my self .. watching this video totally change it

I am in awe. I have to say this these are the type of attitude and people we need to head crisis situations. when they arise. FOCUS

Nice work. One suggestion, I would drill the pocket holes for the base on the outside face of the box , that way the screws are not biting in the very edge of the base plywood, which is weaker. The issue is that the holes are then visible but since you’re painting the frame, file holes and no problem there ;)

@AlilishSuki

3 жыл бұрын

So the holes going into the frame, going around the frame (horizontal), or the holes going into the bottom base(vertical)

@EilandMeisje85

Жыл бұрын

I was going to comment the same thing for future builders. The bed isn’t as strong bc of the way she did her pocket hole attachments but she did phenomenal. Also the holes could be plugged for less visibility.

Outstanding work, super proud of you seeing you tackle a project I’d like to. Maybe when editing video, have music volume a little lower. Ima go check out more of your stuff

@diamondintherough._2777

3 жыл бұрын

Yes! I’m fairly new to KZread and didn’t realize how bad the sound was. Will definitely fix that for future videos. Thanks for your comment!

@eugottabekiddin3772

2 жыл бұрын

I kept my volume control on screen...ran it down every time the music started, but then I had to run it up to hear directions. I'm sure experience will make it better next time.

@tywanasutton1640

2 жыл бұрын

I didn't even notice the music...I was so engulfed in the presentation! Great job

Great job! I’m a believer now! That extra room “ the junk room” has a bed you can’t see… useless but this makes it worth havin a bed Thanks a million. This project after my greenhouse. 😁

Outstanding. Pleasure to watch during my lunch period. Never stop creating!

Can't wait to build my own! You've given me the confidence to do it myself.

@diamondintherough._2777

3 жыл бұрын

Amazing. Check out the plans in the description too!

@MrHemi4spd

2 жыл бұрын

Buy the actual murphy bed hardware.

Wow, I love seeing women empowered by grinding on their own, if need be !! Great job young lady !!

Great project. You made it look so easy, but your video is also very inspiring for someone who’s never attempted a furniture project to give this one a go.

Wow! I’m impressed, you built that like a pro!👍🛠️😮

Wow - you give me hope. I have been looking for a reasonably priced murphy bed. Never thought of building one myself. You worked very hard on this and the results are great.

@diamondintherough._2777

3 жыл бұрын

Amazing. Check out the links in the description for the build plans. Takes all the guess work out of the measurements! That’s the trickiest part!

Nice to see somebody do diy the way most of us do-on the deck with a simple saw. Nice job. I've been wondering what i could do with one of those jigs. Thanks, sister

Great job!!! When I go this I will probably use carriage bolts to attach the boat seat swivels.

You are absolutely INCREDIBLE!!! Watching you build this made my universe, you inspired me to make my murphy bed. Your lil one will always remember you designing & building this EPIC piece~ Sending smiles!!!

Very cool and what a great job. I'd totally use this to make one in my house if plywood wasn't 80 bucks a sheet!!

@bracketvilletexas

3 жыл бұрын

:) lets think out the box, like looking for old wood from demolish houses... I am just amaze how much ease she put into her project this is awesome

Great job! It's encouraging to see a woman do this so I know I could do it, too! There were times you went a little fast, especially attaching the lifting mechanisms. You did an amazing job creating the wood panel design on the outside. It looked too pretty to paint!😊 I'm really impressed by your woodworking skills! Thank you for sharing!!!😊❤️❤️❤️

@diamondintherough._2777

3 жыл бұрын

Thank you so much! It was tough recording all of it in detail while doing it but I included all the details in the build plan to make it a lot easier. I appreciate your kind words🥰🥰

@ritareilly8548

3 жыл бұрын

Jesus Loves you!!!❤️❤️❤️

@barbkeen1221

2 жыл бұрын

@@ritareilly8548 You can always go to the settings and set the playback speed to the slowest speed to see it better.

Thank you so much. I want to replace the bed in my guest room to a Murphy bed so I can use the room when I don't have guests. The way you do will save me a lot of money since all the murphy beds and kits are quite expensive. Great detailed video. Thank you!

You did an absolutely amazing job!!! This is the first video I’ve seen where I now feel confident enough to try on my own

I have no idea why it came up on my list but i love it. Really great project nicely put together video

Excellent video and project! I appreciate that you say: 'drill pilot holes" instead of 'pre-drill holes'. The reverse diamond design is great! The only downside I see is that you will need to remove everything from the floating shelves each time you want to use the bed but not a big issue.

Thanks for this video! Our disabled sister-in-law is moving in with us in our converted garage. This is something we've been talking about buying.

I made two of them in my children's room they have enough space to go crazy and play. But you must add gas pistons to assist when you lift unless you are physically fit.

@diamondintherough._2777

3 жыл бұрын

Great job! They save so much space! I don’t need to gas pistons for my use (maybe one day down the line) but I appreciate your comment!

Perfect timing!! I was thinking about getting a bed for a spare bedroom I have, but it's really a small room and I was worried about losing the space. I'm pretty sure I'm going to do this project in the coming weeks. Thanks so much for the inspiration!!!

@diamondintherough._2777

3 жыл бұрын

Yay! I love seeing other people take it on. I have detailed plans in the description if your interested. Also includes a full cut list.

Nice useful design for anyone that wishes the convenience

I'm cabinet maker for 16 years. Yes cheaper solution but still a lot of work. Very impressive doh good job.

I have been looking at buying a Murphy bed in our guest room but this video has inspired me to make my own and personalize it! Thank you

@diamondintherough._2777

3 жыл бұрын

Amazing! Check out the build plans in the description. It includes a cut list, material list and step by step instructions

I'm so impressed! Awesome job!

Wow you are a great engineer. Amazed at your work. Well done !

As someone who's watched countless professionals on KZread...you are right up there with them, I'm blown away

Clean build and clear tutorial. I love the minimalistic, yet stylish approach as well. I subscribed, because I'd love to see more of your builds and projects. In any case, thanks for sharing!

WOW!!! Fantastic project. I watched the entire video even though I don't have the talent or tools to build something like this...but I'd give anything if I could! Keep up the great work!🌟

Love to see women craftsman. I work alongside many daily. Great Job. Simple, clean and safe. If ever I decide to build one myself I have another teacher to get pointers from. Keep up the great work.

Adding this to my how to Playlist. A great summer project.

Excellent job on the bed, but kill the volume when your not talking, it's annoying having to adjust the volume every time we need to hear you describe the work your doing.

This was a clever design and build! Great job! Thank you for sharing.

Nice job, this is the second one I have seen using the boat seat bases for the hinge point

Wow impressive. You made it look so easy. Great job!

I absolutely love it! Thank you for sharing.

Great job- looks amazing

The plans and video are so easy to follow and the cost of the plans is affordable! Thank you so much for being willing to share your expertise 😊

Awesome build with a knowledge and a very pretty lady doing it, plus a great choice.of cordless tools ...great video ma'am

I literally just finished making my own Murphy bed after watching countless youtube videos, really wish I had been able to see yours before I did mine. Great job and simple explanation, the bed looks amazing!

@diamondintherough._2777

3 жыл бұрын

Thank you so much! That’s what I had to do too and there were things I didn’t see in other vids that I tried to add here. Glad you liked it!!

@codyw4022

3 жыл бұрын

@@diamondintherough._2777 How much did this cost you in supplies?

@diamondintherough._2777

3 жыл бұрын

@@codyw4022 I can’t remember the exact amount but for all of the materials it cost around $350 (not including the tools).

@codyw4022

3 жыл бұрын

@@diamondintherough._2777 okay! Thank you!!!!

Thanks for great upload and it even helps that you provided plans. I didn’t notice you mentioning that and it was truly helpful. Thanks again Queen, keep these videos rolling!!

Very similar build to what DIY Creators KZread channel made. I do like this design more for what I'm looking to do. I don't need drawers on the side. So it's good to see that at least worked the way I was thinking in my head lol

Go girl !!!! Didn't realize I watched this video 3 months ago, til I started reading the comments ! It was just as exciting today watching, as it was 3 months ago ! I kept saying, "Gon girl !"

@diamondintherough._2777

3 жыл бұрын

Aww that’s so awesome. Thank you🥰

Such a simple, gorgeous build! Thank you for sharing your brilliant inspiration!

A true diamond in the rough. Well done. :)

Absolutely beautiful. I love the herringbone pattern! I’m going to make this project. Thanks for showing us!

Gurrrrlll!!! That was impressive! The bed AND the video. I've been wanting to try making a M bed, but yours is the first DIY demo that makes me feel like maybe I actually could tackle it. The bed is plenty nice enough without a lot of bells, whistles, and special tools and equipment. Thank you so much for posting this!

Great work, don't usually comment on anything but I'm hopeful one more will encourage you to keep going with your channel! You're very skilled and will be a great inspiration to a lot of people! You've already inspired me! Keep up the good work!

@diamondintherough._2777

3 жыл бұрын

Thank you so much. That’s very kind!

What??? How is it that you don't have more subs??? 😱You have a new one over here! ✌

@omokaroojiire

3 жыл бұрын

That's what I want to know!!! She is amazing!!!

@PhamilyLife

3 жыл бұрын

Same!

@poom641

3 жыл бұрын

Get a life and stop counting subs ugh

very impressive. I just built one of these using expensive hardware. And now I've been waiting to see how it is done without that, Thanks so much, You are great

Great job❤! I love this ideas & wish I would've seen it before I purchased a bedroom suite❤😊❤!

Hey - this is really good stuff!

@bracketvilletexas

3 жыл бұрын

I agree with you Larry step by step with ease. I am so impress I want to start a project such as this one. Im a thinking about it very seriously

Cool build! I had the same idea a while ago and wondered if it would work. Have you thought about adding gas pistons to assist with lifting and lowering the bed? I'm very curious if that is possible. That would potentially make opening and closing much more easier and safer.

Your presentation blew me away - I love your confidence, your methodologies and your super-professional voice over. Bravo! I especially enjoyed watching you create the chevron fascia and the shelf/legs. The only thing I wish you videoed was the second stage of the hinge attachment. I'm not sure how I'd manage in such a tight space. Many thanks!

Wow - love this! You rock and great job.

What a great alternative to the usual $3-500 murphy bed hardware! Would have loved to see more detail around how you got that installed. Also, would like to hear how its holding up in a year or so!

@davemetz7368

Жыл бұрын

So would I have also liked to see more of the hardware. I said to myself......"" How could she have left one of the most important part I believe most viewers wanted to see, the hinge/swinging mechanism "" ?

So awesome thank you, music gets a bit loud in between though…

@livinginthenow

3 жыл бұрын

Yeah. Her voice was so soft when she talked, so I had to turn it up a bit. But then the music would start and it was so loud, so I'd turn it down. And then she'd be talking softly again, so I had to turn it up. And then it would start all over again with the loud music. It's a great video as far as sharing the information about making the murphy bed, but it would have really been nice if the volume was more even.

Great job, love the simplicity, thanks! Subscribed

Omg you are a life saver! Im going to be moving to europe and small rooms are the norm there and I wanted a guest bed/ study without losing the study space! This is perfect!

You did an awesome job. It turned out exceptional.

Marvelous!

TU so much for sharing this super easy way to do yhis project. As others said on previous comments, this is the best, easy and informative video regarding murphy beds.

More than happy to say how well it turned out. This is a great example of clever ingenuity. You will inspire so many people out there, hat's of to you!

Awesome, keep it up! Youl be huge soon!

@diamondintherough._2777

3 жыл бұрын

I appreciate it!

@carriesimon9830

3 жыл бұрын

I agree!

Love to see it, Black Excellence!!!

@vincentdv5231

3 жыл бұрын

stop categorising people.. she is an awesome human being.

@MrCH1

3 жыл бұрын

@@vincentdv5231 BLACK EXCELLENCE!!!!!

@vincentdv5231

3 жыл бұрын

@@MrCH1 shut up, you are part of the problem

@MrCH1

3 жыл бұрын

@@vincentdv5231 BLACK

@MrCH1

3 жыл бұрын

@@vincentdv5231 EXCELLENCE!!!!

You are absolutely amazing! I'm blown away by your skills and creativity. You go! 🤗

Incredible! I'm going to do this. This is so cool. Thank you for the tutuorial.

It has been a year since this video was released. My main question is: *Has this build lasted?* Can an update be given, even if it is a short one?

@rawlr9066

7 ай бұрын

yes, I would like to know too.

@igounfazed

7 ай бұрын

​@@rawlr9066 It's likely that no update will ever be given. I have made my own, in similar fashion to her's, except for the hardware. It's a temporary situation that I will be using for a long while kind of thing. If you are interested in knowing, continue reading. If not, then just stop here. I made a short twin sized bed with 3/4 inch birch plywood, the type used for cabinets and other furniture. It's thick and sturdy enough to hold my 155 pounds without issue. Since it is twin sized, I didn't need reinforcing ribs to preven bowing or cupping. I framed the edge to hold the matress in place just like she did, with actual 1 inch thick cedar boards. I had to pre-drill every screw hole, and I placed screws every 6 inches to secure the 'walls' tightly. I did not use wood glue, but only because I had run out of it, and was too cheap to buy more for a temporary sleeping arrangement. To tilt the bed away and back down, I used two sturdy 3 inch door hinges. To secure the bed from falling when put away, I used a gate latch. The latches that look similar to bolt action rifles (?). I sized the bed frame to slightly squeeze the matress, and to be above the bed frame about 1 inch. So the 5 inch thick matress is surrounded by 4 inch walls. Oh... this is all hinged on regular 2×4 lumber. I have been sleeping on this every day since I made it, approaching a year, and it has held up fine. I did need to change the wood screws the gate hinges come with to bolts and nuts, as I put something near the pivot point one day and forgot about it. When I went to put the murphy bed in the sleeping position, well... I levered the wood screws out. A mistake I have not repeated. My build is no where near as fancy as her's. But, it works well and hasn't failed on its own. It's actually pretty comfortable and having it put away through the day time gives me a lot of useful space in my very small (temporary I swear) home.

@rawlr9066

7 ай бұрын

@@igounfazed Sounds like you hace that works for you. Glad it worked out for you. So instead of the boat swivel, you used hinges on 2 x 4's...so how did you put the 2 x 4 in place?

@igounfazed

7 ай бұрын

​@@rawlr9066 In my case, I built a 2×4 frame for the bed to hing on to. My dimensions for the 2×4s are 2 pieces 42 inches long, and 2 pieces 11 inches long. That gave me a frame that is 42" × 14" (the 11 inch pieces go in between the two 42 inch pieces, and the actual size of a 2×4 is 1.5" × 3.5"). So, 11 + 1.5 + 1.5 = 14. The 2×4 frame is held in place by the plywood box (closet) made to hide the murphy bed into, and that closet is attached to the wall just like hers. I used the 2×4 frame to attach the door hinges, and attached the bed frame of similar build to what she made to the door hinges. On the bed part, I used "T-Nuts" with appropriately sized bolts to attach to the hinges. So it is securely fastened. All that gives me around a top of mattress height of 19-20 inches when pulled down for sleeping. And I use a "Bedroom Bench" to rest the foot of the bed on instead of legs, as it gives me seating space when the bed is put away. Again, I didn't make mine aesthetically pleasing. I made to be functional first and foremost. But it can easily be made with fashion in mind.