Wow! Way to go! This video is honestly amazing... Thank you so much for making it simple and easy to understand!

@supatony

4 жыл бұрын

Thanks mate. If you take your time, its one bolt at a time.

@supatony

2 жыл бұрын

PS What Head unit did you guys install in yours?

Well done! The 2 dislikes are from the old clutch and throwout bearing :p

@supatony

5 жыл бұрын

That's hilarious...good call.

Tony - done like a pro! Both the job and the vid! Tavarish eat your heart out (and he would have made that vid drag out for 3 x 20 minutes)! In particular, your commentary was succinct and clear.

@supatony

5 жыл бұрын

Thanks mate. I did try to make it short and watchable..

Great video. I have an 04 gated manual, and although it isn't due for a clutch now this will help when it is! Thanks for sharing.

I would absolutely tackle this job in my garage. Nice! And a colour matched shop crane too. Excellent!

Hey you don't understand how much you've helped me. I replaced mine with kevlar from Titanmotorsports.

@supatony

4 жыл бұрын

Great news mate. Did you take any pics or video. I would love to see your journey..

Great vid, man! Super educational and helpful to the Gallardo community!

Well done!!! Impressive work

Great Job ! Looks fun

Hallo brother Clifford from Melbourne love what you don with the gallardp I'm looking to buy one soon a 2013

@supatony

2 жыл бұрын

Great car, I now have another later model spyder. Definitely work on your own car, its not hard at all. And it will save you so much money too.

Wow what a great video. I've been considering buying a Gallardo and have been doing as much research as possible, including the cost of a clutch change. It looks very straightforward, and the only challenging part is remembering which bolts went where! Although the car I'm considering is an e-gear which means it'll need the lambo computer system to reset it :(

@supatony

4 жыл бұрын

That can be arranged, as its a 10 minute job. So you can do the clutch and trailer it to a mechanic who has one. General oil changes are done in under 30 mins from start to finish and its fairly affordable.

Awesome job, very brave

Awesome video 👍

Woow this isn’t as bad as i thought, thank you for this awesome video .

@supatony

4 ай бұрын

just one bit at a time. its just time consuming the 1st time. Although having this video will certainly help you go quicker.

Thanks for the making the excellent DIY video.

@supatony

5 жыл бұрын

Appreciate the comment mate. Thanks

Good job and detailed description!

@supatony

4 жыл бұрын

Thanks mate.

Incredible video - Well done!

@supatony

2 жыл бұрын

thanks mate. It was just one step at a time..

Very nice job, you should be proud!

@supatony

3 жыл бұрын

Thanks mate

Good job Tony !!!

@supatony

5 жыл бұрын

Thanks mate..

Great video and very informative, Just a quickie though regarding the E-gear fluid, once you had reassembled everything how did you go about the fluid? did you just top the bottle up then have Lara bleed it?

@supatony

2 жыл бұрын

you got it. Just top it up a little and the computer (aftermarket) reset the clutch and bled the system in about 2 minutes.

Great video. You don’t seem like a beginner at all

wow! Amazing haha. So much work!

@supatony

5 жыл бұрын

Thanks guys

Awesome vid!

excellent video

@supatony

10 ай бұрын

thanks mate 👍

Hey mate, thanks so much for sharing this. Looking into an 2006 Gallardo (6 speed MANUAL). It due for a new clutch very soon. I want to do the job myself as it seems to be a straight forward job. From your video, you mentioned that I need to reset the ecu? Is there a specific program I need to upload to reset? Where do I find this etc. I am no mechanic, but getting a mate in a local workshop to help me out. Any help would be amazing! Located in a Sydney. Awesome page 👌🏾

@supatony

4 жыл бұрын

Hi mate. My Instagram is supa_tony , hit me up with any questions you have. I can also get you the clutch at a good price too.

You are GOD!!! Haha. Great vIdeo brodie!

Great video! Should fly you here to USA to do them :)

@supatony

5 жыл бұрын

Glad you enjoyed it mate.

Good job mate!

@supatony

5 жыл бұрын

Thanks mate.

This video rocks

DIY Lambo FOR THE WIN!

Nice little video mate. Good length , good amount of detail, camera stability could use some work though. I applaud you for having a crack at doing this yourself, must be daunting pulling apart a supercar but in reality its just nuts and bolts like any other.. How much did it cost you to do and how much would it have been at a dealer? I hope to join you and the others in the brisbane supercar scene soon. Keep up the vids mate.

@supatony

5 жыл бұрын

Yeah, i did the hyperlapse shots on a tripod, but the speaking shots were on the selfie stick, so that did move around a bit. Glad you enjoyed it mate and thanks for the comment.

@supatony

5 жыл бұрын

I ended up saving about 6 to 9k approx. It cost me under 5k to do it.

did you use a workshop manual for this procedure or was it just a bit of hit and miss with the tools? Im about to do mine soon and would love to have a chat as to what problems you ran into and what dos and dont do's Mines a manual so no need for calibration thank god

@supatony

5 ай бұрын

Hi mate. All the tools are very straight forward and only basic tools are required. I do have a copy of what "tensions" to do the bolts at. A manual car is a lot easier. The video has assisted a lot of DIY owners to change their own clutches. I go under the same name on instagram supa_tony, so hit me up with your progress when you start.

Did you use an OEM computer or aftermarket for the E gear bleeding and clutch reset?

@supatony

Жыл бұрын

aftermarket. I think it was a Texa brand. I hired a European mechanic to go it, and he was there for only minutes to reset & bleed the egear that he didn't even charge me.

Great job! With the money saved you could have bought a great exhaust 🏎💨

@supatony

5 жыл бұрын

Agreed. But the original is modified to the perfect sound that i want. Now i don't want to change it as i love the rumble too much 😉🙂

Well that was an awesome job. Mine is an 04 manual so I'm wondering why a computer is needed to reset the clutch? Also, how many KMS on your car. I'm wondering why your slave and throw out bearing was leaking so badly. These seem to be a big ticket item to purchase.

@supatony

4 жыл бұрын

Hi mate. The computer is used to reset the clutch position as well, so you know how much you have left etc. Mine has done 50k and yes, that throwout bearing looked a little yuck. The new ones are much cheaper and last a lot longer than the old styled ones. Hit me up if you're in Australia and need parts at the right price.

Your my hero

@supatony

7 ай бұрын

it was not that hard.. 🤗

Subscribed

nice job!

@supatony

Жыл бұрын

Thanks mate..🙂

@ridethebull4484

Жыл бұрын

I have an 07 Gallardo, that my friend is too in depth for me, your confidence is awesome!

Hey mate, what software do you use to calibrate?? I have the maxisys but still cant do it

@supatony

3 жыл бұрын

The technician from memory used Texa software to reset the clutch and cycle the egear fluid to bleed it from air bubbles.

I understand that u need the software to re program the clutch senser. Would the engage and realse still work are self learn the new one? I did clutch before going by best judgment tools hoist that i have considering this attempt. Closes Lamborghini dealer from me is 20h drive.

@supatony

4 жыл бұрын

The computer is used for 2 main things. The more important is to flush the EGear fluid to bleed it. As you will not be able to do this without some sort of computer (Note, it does not have to be a lambo computer) as the one I used was not. This is done very quickly. Maybe 2 minutes and its done. The second thing is to reset the clutch values. This only takes a second to do on the computer. I have not been able to find a way around using the computer for flushing the egear yet.

@nightfly1985

4 жыл бұрын

When my car gets there it gets there. When i both my car made a deal conditional clutch read 65 plus % the lambo dealer did not wright the snap read on my invoice but told me verbally the clutch is done. It bin 3000kms car still has no sign of slipping are shifting problems. On my hoist i pop the rubber plugs under the housing u can see the plates disc ect. Was told not the way to check it . On my caliper in got 5.59mm I read rivets are around the 5.2mm . I'm planing a winter trip with the car towing it to my location and problebly drive it other 1000km in the month hopfully she dont let go right after i unload it . Thanks for the upload isint much publicity on theses.

Amazing vid. You got to be a patient brainy mechanic guy to do that

@supatony

Жыл бұрын

Thanks mate. Although Im no mechanic and just took my time and all the resources are on google and youtube. Appreciate you taking the time to reply too.

how do you know where to align the clutch with the flywheel? I noticed the "5" on the clutch didn't match the "5" on the flywheel. And what are the torque specs on tensioning the flywheel like you mentioned? I have to do this in a few weeks and want to make sure I've got all the info I need... Then... I've got one more question... Do those two green seal rings have the following part numbers: WHT002218 and N90111302? sorry if this is a hassle to answer

@supatony

3 жыл бұрын

When the clutch and flywheel arrive, they come with markings on them. Usually pen marks from where they were balanced at the factory. So you just need to align these when fitting. You will see i wrote on the bolts, that's the order that you tighten them. Torque to 70nm for the flywheel bolts. Let me go see what green seals you're talking about, and get back to you. If you have instagram, find me supa_tony and we can chat direct on there for more info.

@supatony

3 жыл бұрын

Not sure at this time on the seal part numbers. When ordering the clutch kit, these will come with it and they will be specific to your vehicle..A big tip, soak your exhaust bolrs with a lubricant like wd40 at least the day prior. Exhaust bolts are one of the biggest pains in doing this.

@codyfordyce7357

3 жыл бұрын

supatony thanks for answering. I’m getting one of those Kevlar clutches from hi tech exotic. I think I’ll call the nearest dealer and have them send me the full list of parts and I’ll double check that my lists are correct and add anything if it’s missing. Thanks again though and your video is a great resource along with Tavarish’s multiple videos with his clutch job. It’s proving difficult to get all the details from these multiple resources into one picture. I think maybe I’ll make a video of my clutch replacement project and I’ll include the part list in the bio

have you thought about a kevlar clutch?

@supatony

7 ай бұрын

the added cost of the kevlar was just too high to be honest. I really weighed it up and went OEM. You would go kevlar if you never intended on selling your car.

How did you go about resetting the clutch wear sensor so it reads clutch wear properly

@supatony

2 жыл бұрын

that's where you get someone with a computer diagnostic system that reads lambos to visit you. The guy who did mine was in and out in 5 minutes. That included resetting and bleeding the egear.

Hey what a cool video man, how much is the regular cost of this clutch replacement in a car shop? , clutch + service?

@supatony

9 ай бұрын

Lamborghini wanted 20k

@ElJuli24

9 ай бұрын

wow thats ....insane @@supatony

Wholy shizzzzlesticks! Glad it all worked.out 😎👍

@supatony

5 жыл бұрын

Just one step at a time mate..And lots of research along the way. 🙂

What do you do for living and thanks for video

@supatony

3 жыл бұрын

I don't really know what I do for a living lol . Thanks for stopping by though..

After the replacement parts, didn't reset ECU or something?

@supatony

4 жыл бұрын

With the computer, you reset the perimeters of the clutch. That takes a few seconds to do.

The engine crane nearly matches the car colour :) Haha

@supatony

5 жыл бұрын

Actually we were quite excited about that too. lol

Is your car a gated shifter or automatic? Is the procedure the same?

@supatony

2 жыл бұрын

same procedure, but you don't need to reset your clutch so it's easier.

Wow super easy! Lol

11:42 Can you please tell me how I can get this computer in order to recalibrate my clutch and bleed it at the same time? My clutch has developed a shudder and i need help and of course any help you give me by pointing me in the right direction would greatly be appreciated. Regards Nick

@supatony

2 жыл бұрын

Hi mate, you need to either get a mobile "Euro" mechanic or take it to a shop who has the computer. It only takes a few minutes to do. You could also do a soft reset. You do that by turning your ignition to the on position, pulling in both paddles until your dash makes a sound. Then from there you can turn off the car and restart it and it will have adjusted. Google soft clutch reset gallardo.

@nicholaschriss1706

2 жыл бұрын

@@supatony Thank you for getting back to me Tony, I will try the soft reset first and let you know how I go.

What computer software did you use? I want to try and replace clutch but I dont have the computer software. Where can I purchase? I have a 2007.

@supatony

2 жыл бұрын

Hi mate, you will need someone with a European computer diagnostic system to reset it for you. It only takes a couple of minutes.

@vinnythehandyman

2 жыл бұрын

@@supatony is it drivable after clutch replacement when I take it to a Machanic for the diagnostic or should I tow in?

@supatony

2 жыл бұрын

@@vinnythehandyman tow it in. I used a mobile guy who came over with just the computer and reset the clutch. If its egear, they will also do a "Bleeding sequence" and bleed the air from the egear hoses (Takes about 1 minute).

@vinnythehandyman

2 жыл бұрын

@@supatony You are very generous with your time to the forum. I want to start up loading content on maintenance with my 2007 Gallardo on my KZread channel. I live in the United States. Where can I purchase bearing and clutch. totally lost! im at 50% so its around the corner

@supatony

2 жыл бұрын

@@vinnythehandyman hi mate, you have two options. Genuine OEM from Lamborghini (I would strongly advise shopping around between the dealers for the best price) You will need the Clutch kit with throwout bearing. Alternatively, you use a clutch from Hi Tech Exotics clutch. More money, but it will last longer. I went the OEM original route and it has been great.

Me again 😂. Did u need the clutch alignment tool and if not, did u just align it using the dowel? What do I need to know

@supatony

3 жыл бұрын

I aligned it with a piece of plastic (similar to a dowel) Just made sure it fitted both snug. You align the clutch markings with the flywheel. As these are balanced. Depending on what clutch you buy, it will have markings in different places, But should be fairly easy to work out. Just get the flywheel bolts tensioned correctly. Oh, and another one you really need to focus on is the drive shaft bolts, make sure they are tensioned correctly too when putting it all back together. Dont forget to find my instagram supa_tony and hit me up directly for any info you need. You can send me pics etc if you get stuck and I can hopefully assist you.

@codyfordyce7357

3 жыл бұрын

supatony I’m gonna message you there now so I have quick access. I haven’t seen anyone talk about the driveshaft tensions. I’ll message u on IG 😂

Very nice overview of the process. Did you purchase the Lamborghini clutch alignment tool (62195015), or is there a cheaper alternative tool?

@supatony

3 жыл бұрын

you can easily cut a piece of dowel.We had a piece of plastic we quickly shaped to the size and it worked a treat.

@ryanparkinson7733

3 жыл бұрын

supatony Thanks for the tip!

@ryanparkinson7733

3 жыл бұрын

supatony One more question. Was your throw out bearing leaking such that there was a slow drip out of the inspection hole on the transaxle housing? Any insight is much appreciated. Again thanks for the diy video.

@supatony

3 жыл бұрын

@@ryanparkinson7733 its always worth replacing your throwout bearing at any stage that you did the clutch. Mine was a bit yuk.

@supatony

3 жыл бұрын

hit me up on Instagram supa_tony and feel free to direct message me any questions you have. Just had another guy doing his clutch this week and its great we can share this info berween us.

Now it is confirmed why they charge what they do. LABOR INTENSIVE. Wish you showed the computer reset as part of it.

@supatony

2 жыл бұрын

Computer reset was so fast I didnt have time to grab the camera. It was completed in under 2 minutes. As for the time it takes, well now this can be done in one day. So it's not labor extensive when you know what you are doing. Hope thus info helps.

That’s why Lamborghini labour costs cross 1200 bucks on yearly service.

I'd like to know how many hours in total you spent on it (then double it for we amateurs), and what the garage would have charged in labour.

@supatony

Жыл бұрын

First time for anything is SLOW. I took my time and it took about 10 hours to have the clutch out, and it went together faster though. So took me 3 days in total. Although I know now I could do it in half that time. The quotes I had for doing it were about 10k here in Australia. Now, I have found a special Ex Lambo mechanic who can do this in ONE day, so in the future I am going to use him. And he will charge about 3k. But you really need to do your own work on these cars.

@juchetony1910

Жыл бұрын

@@supatony cheers for the detailed response. I honestly thought you'd done it in two days, and the 10k quote left me jaw dropped. So I was out on both counts.

@supatony

Жыл бұрын

@Juche Tony I have had countless people contact me and who have done this from watching the video. All have been successful too. So, it can be done by someone with limited knowledge of mechanical skills. Hope this helps mate.

@juchetony1910

Жыл бұрын

@@supatony I do most of my own repairs...but on my classic Beetle. Not quite the same league!

What did the parts cost mate?

@supatony

Жыл бұрын

$5500 Aud, or $3600 USD.

@chiimchim7987

Жыл бұрын

@@supatony awesome, I guessed $5000, so not far off. Thanks for sharing

Üdv mindenkinek ha terveztek ilyen kategóriájú autót venni csak Lamborghini Avendatort vegyetek megkímélt állapotban ISR robotizált váltó 7sebességes van benne dupla kuplung hibátlanul működik ajánlani tudom szerelni egyszerű az automata váltót az Audiból lopták picit módosítás van rajta de hulladék temető én biztosan nem vinném sehová hogy belegányoljanak a kontárok jó videó ez szeretem precíz munka hajrá.

How long did it take start to finish?

@supatony

4 жыл бұрын

About 10 hrs to get the clutch off. But now I know what im doing, I could cut that time in half.

@I4Corridorparanormal

4 жыл бұрын

I gotta do mine sometime here in the next few weeks, never done it before but it doesn’t look to bad

@supatony

4 жыл бұрын

@@I4Corridorparanormal just one step at a time mate and you will get out done. Is it egear or manual.

@I4Corridorparanormal

4 жыл бұрын

@@supatony it's an egear, i was quoted 6500 by audi by my house, I bought the clutch for 2k so if it takes me a weekend to finish than I am happy with that to save 4500

@supatony

4 жыл бұрын

@@I4Corridorparanormal find me on instagram supa_tony and i may be able to asist you at stages if you get stuck. You can send ne pics and video of where you're up to.

Is it me or do these cars look really easy to work on?

@supatony

Ай бұрын

you are right. Once you get past the " Brand Nane" its pretty straight forward.

It would be interesting if I could buy a laptop with the software to reset the clutch.

@supatony

4 жыл бұрын

Actually, you can. The system we used was not specific to Lamborghini. If I recall correctly its brand may have been Texa.

@HackerL96

4 жыл бұрын

@@supatony Thanks a lot. I will try to get a tester.

catch can?????????