DIY - How to change Spark Plug on 2004-2008 Acura TSX (K2 engines) | For Beginners (Complete Guide)
#DIY #Cars #Honda #Acura
Hello everyone, today I will show you guys how to change spark plugs in your 2006 Acura TSX car. This car has a 2.4-liter i-VTEC 4 cylinder (K24A2) gasoline engine. This video should be applicable for any First-gen (CL9) Acura TSX cars produced between 2004-2008 alongside Honda Oddessey and Accord with the same K2 engines. This DIY will be very straightforward and an easy job.
This was my first time changing spark plugs. If I can do it so can you. I am literally teaching myself doing these projects and recording them at the same time. Hoping to inspire others who are intimidated by car maintenance or car-related work.
Links to the product used:
Spark Plug - www.autozone.com/external-eng...
Spark Plug Gap Gauge - www.autozone.com/clamps-and-m...
5/8 Mag Spark Plug Socket Extension - www.autozone.com/test-scan-an...
10mm Deep Socket - www.autozone.com/ratchets-soc...
Video Captured via iPhone 11 Pro max
Editing Software: Da Vinci Resolve beta 17
Photo Editing Software: GIMP
Text edited via Canva.com
Music: The Emperor's Army by Jeremy Blake
If you guys have any questions or concerns then please reach out to me in the comments below and don't forget to like and subscribe. Thank you.
Пікірлер: 23
Great video!!very detailed.keep it up👍
@Mr.Roy72
Жыл бұрын
Thank you! 👍
Good job, thanks
Great video. Very detailed.
@Mr.Roy72
3 жыл бұрын
Glad it was helpful!
Really good job on vid!
@Mr.Roy72
2 жыл бұрын
Thank you sir. Glad you enjoyed it.
Thank you for this guide. I just finished installing mine.
Thanks for the video!
can you use a 6 inch extension in place of a 10 when none are available locally?
How do you know you've tighten at the right pressure without over cranking and not having a pressure reader on your wrench?
Thnks
@Mr.Roy72
Жыл бұрын
np
That’s it how you use that gap tool. Put the ground loop through the hole and bend back to open the gap. The way you are bending with the gauge is mashing against the electrode - no good.
@jmilan67
Жыл бұрын
That's NOT how you use the gap tool. I know that is what you meant. Good catch!
@Mr.Roy72
Жыл бұрын
The tool is made for it and its the cheapest way. I used it couple of times and I will continuously to use it.
Wow, don't prey on the spark plug with that round tool like that. It will damage the tip of the plug! See other videos on how the re-gap a plug properly. These plugs go for about $16 each these days.
you don’t need to gap NGKs, in fact you are not supposed to
you meant K24A2 engine
Dealer was about to charge me $700 to change a spark plug 😮 😝
@Mr.Roy72
Жыл бұрын
Oh dude what a rip off. STEALERSHIP. Cost me less then 20 dollars.
Did you just tap an iridium plug ?
@jameslastname9171
Жыл бұрын
And he crushed the electrode opening the gap 😢