Very clean work 👏👏👏

Thanks so much doing this video, doing the same to my 2021 ar 210 over this winter

Good vid. Thanks for the info.

so the switch is always on 1 and you switch over to 2 whenever boat is off while using the stereo?

@Channel-About-Nothing

2 жыл бұрын

In my case I run the boat off one and when anchored I use battery 2. If I had identical batteries I would just use whichever.

Is the first and second positive wire connected to the engine starter?

@Channel-About-Nothing

2 жыл бұрын

The two red wires connected to the single battery switch (1:30 ) go to the starters. When adding a second battery you don't change the wire's endpoints, just how the batteries connect.

What size you use for battery wiring?

@Channel-About-Nothing

2 жыл бұрын

4 Gauge for the batteries

Are you gonna add an ACR? to keep from having to switch between batteries?

@Channel-About-Nothing

Жыл бұрын

No, at least not anytime soon. I am perfectly happy with my Noco shore charger.

Did you install a fuse for your bilge pump?

@Channel-About-Nothing

Жыл бұрын

It was already fused from the factory.

Does the negative bus bar need to be grounded or bonded to the metal on the boat (mine is fiberglass, so it will be hard to find a spot), or is the fact that it is connected to both negative batteries terminals enough to create an acceptable ground?

@Channel-About-Nothing

Жыл бұрын

Sorry for the very late reply, it is grounded to the engines which is basically the only ground in this boat.

Hi sir what size is the breaker ?

@Channel-About-Nothing

2 жыл бұрын

It's 40 amp, there is also a link in the description.