DIY E90 BMW 328i Starter Replacement FASTEST WAY

Автокөліктер мен көлік құралдары

Join this channel to get access to perks:
/ @zeiten
Hey guys in this video I'll walk you through starter replacement on your BMW with N51/52 engine. It similar on n54/n55 engines as well but not exactly the same. Below you can find links for other models videos that have been done previously on the same topic and others
E70 BMW X5 N52 starter replacement
• DIY E70 BMW X5 Starter...
E90 DIY Playlist
• DIY BMW E90 Platform
Thank you

Пікірлер: 79

  • @eduardovillegas8208
    @eduardovillegas82083 ай бұрын

    I just have to say that this IS the best video tutorial on starter replacement. Most people talk too much or they show the end result first and they try to explain how they did it which is garbage. Thank you for taking the time to explain and show how to properly do everything to replace this difficult piece, I highly appreciate it. 👍

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Thank you for your feedback, happy to help👍

  • @user-gh3fj5qk6q
    @user-gh3fj5qk6q3 ай бұрын

    I just replaced the starter motor on my BMW 323i thanks to your comprehensive tutorial! Keep up the great work man. I had no issues at all and the car started perfectly! Tip to others: don't drop any studs/nuts while working in the engine bay!

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Happy to help👍

  • @BrandyPowers-yr8uc
    @BrandyPowers-yr8uc3 ай бұрын

    You are a rockstar!!! My car had a few slow starts and one day just did not start. I watched your video and followed along and boom, it’s running. Thank you!

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Thank you, happy to help👍

  • @Dom-gk9ku
    @Dom-gk9ku3 ай бұрын

    I used your older video last year when my starter went out; It was the best video. My car started to crank slow, until one day it just wouldn't crank at all. This isn't a "hard" DIY, just time consuming and tedious. I used the Bosch and a year later it is still holding up strong.

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Happy to help🙌

  • @will_444
    @will_4443 ай бұрын

    I just changed my starter from this video and it was very efficient. Your explanation and video quality is great! Took me about 5 hours to complete!

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Good job, happy to help👍

  • @BmwolotlE90
    @BmwolotlE904 ай бұрын

    bro im amazed you did the job and stopping to explain and it took you under 30 minutes, last winter mine died and was close to -40 no way I was working on it, but shop took it in after a $200 tow, and they charged me 2.9 hours labor $375 and $400 for oem starter, these crooks man. good job though bro appreciate your vids. Thinking to tackle the VCG this spring with your video.

  • @flexiblestrategist9922

    @flexiblestrategist9922

    4 ай бұрын

    They always do that. They LIE. they know it's not going to take over 2 hours. I would have done this in an hour. I've worked on my E90.

  • @jasonmunger8409

    @jasonmunger8409

    4 ай бұрын

    He is great about describing the work step by step and using “basic” tools most of us already own.

  • @BmwolotlE90

    @BmwolotlE90

    4 ай бұрын

    @@flexiblestrategist9922 Yah thats what I thought, because when I went back to pickup the car, the person working on it or whoever unplugged my dashcam, I was hoping to see some footage lol. Money grabbing crooks.. and thats awesome man, best way to do it right and save money 👍🏼

  • @BmwolotlE90

    @BmwolotlE90

    4 ай бұрын

    @@jasonmunger8409 I agree, Tim's the man 👍🏼

  • @rusjun5
    @rusjun5Ай бұрын

    Thanks! You helped me through replacing my starter

  • @Zeiten

    @Zeiten

    Ай бұрын

    🙌

  • @LandonWest
    @LandonWest4 ай бұрын

    Loved the tool layout out front! I haven’t been working on my e90 for very long and am still collecting various tools for the different jobs I’m running into.

  • @Zeiten

    @Zeiten

    4 ай бұрын

    🙌

  • @sandilicious2
    @sandilicious23 ай бұрын

    I used your video to replace my starter... THANK YOU!

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Happy to help🙌

  • @SamT_RV
    @SamT_RV2 ай бұрын

    Thank you so much, doing this job on my e92 over the weekend!

  • @Zeiten

    @Zeiten

    2 ай бұрын

    Happy to help👍

  • @chrisfilipowicz3371
    @chrisfilipowicz33713 ай бұрын

    Great work Tim

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Thank you🙌

  • @waynecarelse7613
    @waynecarelse76133 ай бұрын

    Hi there I am busy doing my BMW E90 starter self ...I am following everything you say

  • @Zeiten

    @Zeiten

    3 ай бұрын

    Pay close attention to all the details and good luck👍

  • @crlsortizmtz4624
    @crlsortizmtz46244 ай бұрын

    Gracias Zeiten for sharing your knowledge...

  • @Zeiten

    @Zeiten

    4 ай бұрын

    Happy to help, thanks for watching 🙌

  • @matthewhernandez9669
    @matthewhernandez96692 ай бұрын

    A little shorter bc there is video cuts. Didn't see all those little screws on the bottom that go back in

  • @federicotorresbordils7624
    @federicotorresbordils76244 ай бұрын

    Congratulations for your channel Great tips to diagnose it, as possible OEM always for electric and electronics. Continuing with electric, you could for next videos make an EPS electric power steering replacement, I think there is no need for software. BimmerN53

  • @ishaam9286
    @ishaam92862 ай бұрын

    Hi, can you replace the starter from the bottom of the car E90 320d N47

  • @kbowlden94
    @kbowlden943 ай бұрын

    So you're not to worried about torqueing it back to spec? Just goodentight?

  • @mohammadhayatca3244
    @mohammadhayatca32442 ай бұрын

    Tim , thank you for the starter diy. You did one for the X5 N52 , a few years back. You are really very thorough and go over step to step. It is very different for N55/X5 2011. ? Would appreciate if you could do diy.

  • @Zeiten

    @Zeiten

    2 ай бұрын

    Thank you, in principle it’s exactly the same, the difference would be in starter bolts you’ll need a e10 wrench to take them out (special tool) the sockets don’t really fit in there. I’ll make one as soon as opportunity arises👍

  • @mikeruck2888
    @mikeruck28884 ай бұрын

    Packed tight in there as usual 😂

  • @Zeiten

    @Zeiten

    4 ай бұрын

    🤷‍♂️😁

  • @luisvargas8371
    @luisvargas83713 күн бұрын

    Im in the process of replacing my starter...i reset the cpu cleared codes on the car...my car did not want to start...24 hrs later i tried one more time to start it, to .move it sp i can work on the starter...is this possible...?.can it be something else?

  • @battlehrfred
    @battlehrfred4 ай бұрын

    Hi Tim, great detailed video as always Sir. professional at work!! 100 percent Question, i know i do not have any problem with my 2013 x5 n55 (knock on wood for good luck) as to any starter but if and whenever i do have an issue someday in the future, what brand do you recommend to use??, the best brand here you say is Bosch,and Valeo, is this the best for 2013 x5 N55 3.0 litre ty sir! nice to see you staying active and posting great detailed videos as always!! 100--100

  • @Zeiten

    @Zeiten

    4 ай бұрын

    Thank you and yes i’d say stick with Bosch well known and established manufacturer supplying consistently good parts

  • @battlehrfred

    @battlehrfred

    4 ай бұрын

    @@Zeiten ,thanking you for your prompt response!! ty sir, Stay safe ( lots of snow in NL Canada now still lolo ty

  • @Zeiten

    @Zeiten

    4 ай бұрын

    @battlehrfred thank you, don’t break your car😁

  • @stevet8607
    @stevet86074 ай бұрын

    Damn bro it's been awhile😂, still waiting on the z-man t-shirts and stuff

  • @Zeiten

    @Zeiten

    4 ай бұрын

    Zeiten shirt has been available for a bit i’ll check if it is still for sale😁 welcome back😉

  • @bryanestrada6195
    @bryanestrada61952 ай бұрын

    How do you go about taking off the e14 bolt in the back of the starter if the bolt head is stripped?

  • @Zeiten

    @Zeiten

    2 ай бұрын

    Depends on how bad is it, i’ve dealt with a few of those, it can be accessed from the bottom. Usually i hammer socket in and it does the job

  • @ufohunters4612
    @ufohunters46124 ай бұрын

    I can't find the video you made of the x5 intake manifold replacement.... please help ...

  • @Zeiten

    @Zeiten

    4 ай бұрын

    There isn’t one, you can check the link in description for x5 starter replacement and use it as reference for intake manifold replacement

  • @luisvargas8371
    @luisvargas83713 күн бұрын

    Can speed sensors cause the electrical components to have issue's

  • @Zeiten

    @Zeiten

    3 күн бұрын

    Highly doubt it

  • @armandohilario
    @armandohilario4 ай бұрын

    Can I use any ATF fluid on my BMW x5 2008 3.0si e70 without adaptive drive

  • @Zeiten

    @Zeiten

    4 ай бұрын

    No, zf for transmission

  • @armandohilario

    @armandohilario

    4 ай бұрын

    @@Zeiten I'm not sure what fluid my BMW has, it looks very dark brown on the cap it says ATF fluid but below where it says ATF it also says chf11s so I'm a little confused

  • @Zeiten

    @Zeiten

    4 ай бұрын

    @armandohilario use chf 11s fluid, you can find it in any autoparts store

  • @armandohilario

    @armandohilario

    4 ай бұрын

    @@Zeiten It doesn't matter that the system does not have active drive?

  • @Zeiten

    @Zeiten

    4 ай бұрын

    @armandohilario no

  • @BryanChance
    @BryanChance3 ай бұрын

    Mine just stopped working one day. No nothing at all..no noise, no nothing. Got me stranded. LOL

  • @luxuryviridian547

    @luxuryviridian547

    Ай бұрын

    Bruh me too literally last week

  • @Rawwrbertz

    @Rawwrbertz

    Ай бұрын

    Bro me right now lol

  • @josephgonzalez561
    @josephgonzalez561Ай бұрын

    bro I need you to come over my house Pronto,, my 328 is whistling something dangerous

  • @Zeiten

    @Zeiten

    Ай бұрын

    Sure as long as you are in LA, reach out

  • @VIS202
    @VIS20215 күн бұрын

    Im not sure why but im getting 3 codes p0123 p0222 and p1417

  • @Zeiten

    @Zeiten

    15 күн бұрын

    Check your throttle body connection

  • @VIS202

    @VIS202

    15 күн бұрын

    Ok thanks ill check

  • @VIS202

    @VIS202

    14 күн бұрын

    @@Zeiten it was the connector

  • @Zeiten

    @Zeiten

    14 күн бұрын

    @VIS202 very common for people to forget to plug it in👍

  • @VIS202

    @VIS202

    14 күн бұрын

    @Zeiten really appreciate your help and response. If it wasn't for your video, I wouldn't have even tried to change it myself.

  • @toneloc4706
    @toneloc470623 күн бұрын

    Why didn't you just go from underneath I have no idea. This is definitely not the fastest way bro. Damn. Only 1 dust cover to unclip from underneath. And hellooo there's your starter motor lol.

  • @toneloc4706

    @toneloc4706

    23 күн бұрын

    😂😂 kzread.info/dash/bejne/jKuc2pOvfcrJhrg.htmlsi=81QuPK-6QLzf_V6C

  • @gabrielez1

    @gabrielez1

    11 күн бұрын

    Do you think I could do it that way shit would be so much easier

  • @BeemerIsTheShit
    @BeemerIsTheShit4 ай бұрын

    Is there no need to disconnect the battery? I assumed the + was live when I replaced mine 🎉

  • @Zeiten

    @Zeiten

    4 ай бұрын

    You can do the job without disconnecting the battery, just have to be careful that’s all, on many bmws people fry frm module when disconnecting the battery, so i’d say you better off leaving it all connected

  • @clydestrong2913

    @clydestrong2913

    4 ай бұрын

    Great job! Thanks!

  • @Zeiten

    @Zeiten

    4 ай бұрын

    👍

Келесі