Super cool build.

@chanslorvalorum6905

2 жыл бұрын

I’ve only been building mine for 40 years. Certainly not a timesaver. One of a kind sound Check my crummy videos

@vulcano911

Жыл бұрын

The cheapest kit from Meniscus Audio Group costs $500 USD., and just includes two 3" subwoofers and one tweeter.

I have recently come to the opinion that DIY saves money not only because you can often create a better product for less, but also because it limits the rate at which you spend money. By spending a week on a project, you have occupied yourself for a week where you are not thinking about the next thing you can spend your money on.

@petergoestohollywood382

3 жыл бұрын

Agreed. And after finishing them diy projects often hold much more value to you so you keep being satisfied for longer... not feeling the urge to go on a shopping spree as quick again.

@matenorth

3 жыл бұрын

Diy saves you money only after a lot of projects having bought all the equipment and tools. If you build just one thing, its way more expensive.

@adamperry7848

3 жыл бұрын

Not to mention the care of the product because you built it and usually one of a kind.

@randybobandy9828

3 жыл бұрын

@@petergoestohollywood382 I agree...

@randybobandy9828

3 жыл бұрын

@@matenorth I never count the cost of tools in my diy builds.. tools are a investment and most last a life time.

Awesome looking speaker! I'm just worried about your receiver mounting ( even if I like its looks), as far as I know top should always be free for hot air moving out and not having overheating issues.

@0L0FED

Жыл бұрын

Yea, there are multiple small issues with his setup. The heat will probably decrease the lifespan of the amp, but since he probably rarely pushes any significant amount of wattage it probably wont really be an issue(also highly depends on the efficiency/class of amp). The placement of the speakers is also a little bit problematic, or at least questionable. I dont really se the point of having the 3 way front system when the speakers are placed that close to each other. Also, calling this a surround system without any rear speakers is missleading. Angling the sound bar up a bit, placeing the R and L fronts on stands away from the TV along with building 2 rear channels would help this setup a lot.

I arrived here because I have a full wood shop and a lot of excess oak board that would be perfect for making speaker cabinets. I'm in need of some for my custom built desk / wall unit and would be using them with my PC. But after pricing out various 4"-6" speakers, Polk, JBL, etc, both new and used on eBay, and adding up the time it takes to build nice boxes, router the edges, sand them, then stain or paint, then install, wire, and solder up the speakers, I can 100% agree that just buying speakers pre-made, even good used sets, will always cost a lot less in time, labor, and materials. Generally speaking I only build those things that I can't get decent quality items cheaply and fast and speakers definitely fall in the cheap/fast category. PS - Every hole saw I own is thrashed too, they all suck. It's weird.

Me I don’t care whether money is saved or wasted, I’m just a hobbyist of DIY as it makes me feel joy as I’m listening to my own creativity

For me, DIY isn't to save money... For me, it's for two things: 1) The satisfaction having completed a project, and the love for the resulting piece as a result of it being unique to you and your own needs... 2) Customisability. Making something yourself, your imagination is the limit of what you can achieve, and if you outgrow your creation, with a little thought, most projects can be easily adapted and/or extended, thus heightening your appreciation for your own work even further. Bonus: Since the bulk of the costs of DIY comes from obtaining the tools necessary to do the work, you can easily offset the cost of something you clearly enjoy, by turning it into a hobby by which you can actually earn A LOT of money, either by building custom furniture for others, or even restoring antiques. DIY is just awesome all around.

@peter2uat

3 жыл бұрын

Having built over 45 different systems (including 4 Klipschorns for myself) for me, my friends and coworkers I can only agree - satisfaction over every finished project, from very small to 5 feet high. DIY rocks and gives you a lot of experience in building all sorts of stuff.

@dineshdas8392

3 жыл бұрын

For example : Gaming PC 😁

Building your own speakers makes you appreciate the end result more. You can look at it and tell yourself that you made these, and damn they sound really good! Not only that. With DIY comes the perk of being able to customize the speakers to your own liking. I myself made a couple speakers that could just as well double as studio monitors. Incredible frequency response in a pretty compact design.

The title is absolutely true. I didn't want to spend $1,500 on a good quality Telecaster, so I went the DIY route and built one for just under $7,000. Now, though, I have essentially a complete luthier's tool set and enough wood to build 4 or 5 more.

Your videos are just unbelievably entertaining. They're so informative but you do an excellent job to not make all the technical stuff sound boring. Amazing work as always!

@ZacBuilds

3 жыл бұрын

Damn thank you Spencer! I try to keep things moving as best I can without skipping the important bits. Really appreciate the feedback man!

Mid-range consumer soundbars are priced around $600-$900 USD. If you spent about $300 (and even accounting for your time) on this build, it sounds like you still came out ahead. Also, when assembling a speaker box like this one, the best idea is to make the top or bottom panel the last panel you mount/glue/screw in place. This will give you access to everything inside the box without having to wire everything up pre-mount.

@paulespino6462

2 жыл бұрын

$300 for parts and your time. Then another $10k plus for tools and a workshop.

@rahul38474

2 жыл бұрын

I don’t think mid-range sound bars cost that much. I have an LG one that was about $300 and comes with a wireless subwoofer and it sounds good enough for me. Quick googling also shows that there’s a lot of name brand sound bars available in the neighborhood of $400. I’m not an audiophile by any means though so maybe our definitions of mid-range differ.

@justingillette8287

2 жыл бұрын

@@rahul38474 I would agree with Paul Espino on this one. when you say name brand, that means nothing about product quality, name brand usually means large budget on marketing/sales/advertising and less money on actual product. Good luck finding a solid wood speaker cabinet that looks as good as his does for twice what he paid first off, second, he and we for that matter know a little bit about the challenges of building sound equipment let alone engineering it. No offense intended, but that LG sound bar and subwoofer is a joke, if you were to pull it apart the internal components would be as cheap as possible. trust me i have ripped into a ton of speakers. The filter of most of that grade equipment is going to be first order, I personally doubt you have a two way speaker configuration in the sound bar anyway, it is likely full range drivers getting everything but a single cap set to block the 120hz and below. the sub is going to be a 50w 6.5in maybe 8" set up that rolls off fast below 60hz, again no offense intended but if your experience is with a sound bar like you describe the rabbit hole is a heck of a lot deeper than you know!

@ragtop63

2 жыл бұрын

@@rahul38474 $300-$400 is the high end of the lower end of sound bars. High end sound bars can go for well over $2000.

@ragtop63

2 жыл бұрын

@@paulespino6462 I can build this with a $30 jigsaw and a $20 soldering kit.

Hey Zac. As a fellow Torontonian, wanna thank you for inspiring a heck load of people. I've been meaning to build my own surround system but was too afraid to do it. Not anymore. Continue to inspire a ton of 'em!

@ZacBuilds

3 жыл бұрын

Thank you so much Billy! Feedback like this is the inspiration I need to keep creating new content, so thank you for making this a 2 way street!

I knew that before even watching this but it's a good point. We, the DIY people don't do stuff our own because we want to save money, I think everyone who ever did something on her/his owen immediately realized that it won't save you any money or time. But also everyone will absolutley agree that it will give you something you'll never get from a bought piece... Most people only think about material cost, you can save plenty on paper but as soon as you come home with some bare wood boards you realize that there's (much) more about building somthing on your own ... But there are situations where you just have to DIY because you can't get a part that fits where you like it or you have some special applications where noone has created a off shelf solution yet. Beeing creative and make things the way YOU imagine and plan it is absolutely priceless!

It's funny how many times I come across your videos of all different types and they never disappoint. Love your content man!

Nice build and big props on the jumps you’re making in video production quality. Good intro, concise, informative and entertaining throughout the edit. Kudos.

Great build! They look amazing! I would caution you about putting your AVR right up against the cabinet. The top is vented so that is dissipates heat. You could potentially kill your AVR as a result!

@jasonoliver3548

2 жыл бұрын

actually, I was looking at it and thinking that he should take the feet off of it because it ruins the illusion that it's floating....so, maybe using them as spacers on the top could solve 2 issues?!?!

A few years ago my son and I built a pair of ported tower speakers using those same Hi Vi woofers, plus a Hi Vi tweeter. We staggered them, from the top, one woofer, then the tweeter, then the remaining three woofers to avoid having a symmetric configuration. They sound great and it was fun designing and building the crossovers and the enclosures. BTW, a "crossover" is misnamed, it is better described as a "FILTER". The full range signal is routed towards both the woofer and the tweeter sections wired in parallel, but the high pass section protects the tweeter by not allowing low frequencies to reach it while the low pass section chokes out the high frequencies that would otherwise muddy up the woofer's output. The crossover frequency is simply the point where the falling output of the woofer exactly equals the rising output of the tweeter.

It's so much fun to diy speakers, and you can tweak them to your own tastes. I used a cnc router to make the box and came together pretty quickly. Everything was designed with adjustability in mind, box volume, swappable fronts so different speaker drivers could be mounted etc. Saves you building a new box every time. I started out with spade connectors to but found they can be glitchy, crackling sound with strong base put through them so soldered most connections in the end.

Nice looking build. A couple things I would have considered is with the crossover components and the placement of your Denon receiver. Spending the time to build such a quality cabinet I would've replaced those cheap crossover parts with good quality parts. Iron core inductors and sandcast resistors really hold back your drivers, muddying the sound. And man your Denon is roasting under that shelf like that. It needs room for heat convection. Amazing looking cabinets though.

@CDP135Z

Жыл бұрын

Came here to say the same thing about that poor Denon!

DIY is often about getting what you want the way you want it, because commercially available products are either junk, or don't meet your requirements. So send more and get what you want, better quality one and what you want= less expensive the replacing junk or upgrading later to get what you want.

@Arterexius

3 жыл бұрын

I agree, but it's only ever true for those of us who do a lot of DIY. If you just do a few things it will be way more expensive to DIY than to buy

Really appreciate your attitude towards the whole audio space. Speaker design is a crazy rabbit hole; your pragmatism is a great way to approach it.

Im watching this 2 years later and its great still...

I'd love to see more speaker content like this. This was really enjoyable to watch.

Fellow Canadian here... this dude really leans in on the classic “Canadian” accent people make fun of us for! Out and about! Lol The projects are dope and filming is next level!

@thaejsooriya3313

3 жыл бұрын

Also Canadian, maybe thats why I didn’t notice anything😂

I've built both the Overnight speakers and the centre channel. Great speakers!

DIY makes sense when you absolutely need something completely custom made that's not economically available for purchase or if it's a specialized piece of kit. Even then you'd do well to calculate the amount of time it'll take and calculate how much that is. If you earn 25$/hour, it'll quickly stack up. I'm a maker and electronics designer, I do DIY a lot since I have the tools, the know-how and it's not wasted effort since DIY is good investment to my skill set in the jobs market. Honing my design and engineering skills. When I was out of job, I did a LOT of DIY. I had no money, but I had plenty of TIME. I'm making my own studio table since I need something special that I can't buy and I won't be happy paying 5000€ for a table that has BOM of 250-350€... And it's FUN! :D

Your cabinet making skills are top shelf, beautiful work indeed!

I very much prefer DIY. Gives me such pride that I did it my way. Your build looks amazing. I belong to a group on facebook, home theater, and man those dudes who buy top of the line gear are total snobs. Anytime someone posts a diy or something not bought and expensive, those snobs come out like vultures to talk crap.

You are absolutely right. DIY audio is not cheaper than store bought equipment. I know, as I myself am a DIY enthousiast, having designed and built quite a few sets of speakers. I do it because I like to make things, and when done knowing I built them myself is just way more rewarding when listening to them. Although most of the time a next project has already been started again. :)

@1pcfred

2 жыл бұрын

DIY costs what you let it cost. If you design with the goal in mind to make a project economically then it will be. If you prioritize other goals then your final price will reflect that instead. It really depends on what you do. If you buy the most expensive crap you can get your hands on then sure it can cost. Big surprise there. Right now I am listening to a speaker that did not cost me a cent to make. Not a single penny. For it to be cheaper you'd have to pay me to cart a speaker away! I'm sure an enterprising individual could work that deal out somehow.

@wadimek116

Жыл бұрын

It is cheaper by a lot. You can't resale it later tho if you get bored

It also depends on what country you live in.... for those living in third-world countries whom have no resources, then creating furniture, tech, etc...you’d be shocked. Here’s an e.g. the new 2tb cellular 12.9 iPad costs a whopping 2400.00 US$ = 4800.00 BD$ + 2400.00 Customs robbery = 7200.00 final cost. Most of us can’t build an iPad, however I have built a raspberry pi pad.

@TempoDrift1480

2 жыл бұрын

I bet a dog would have a hard time building a speaker cabinet like this too.

@sparkeyjones6261

2 жыл бұрын

It definitely depends on which country you're in. That same iPad in Vietnam, Thailand, or China would be a fraction of the cost. In Barbados, you may have access to hardwoods like mahogany at much cheaper prices. How much are the tariffs for imported components?

@TerenceMurrayWolf

2 жыл бұрын

@@sparkeyjones6261 It's supposed to be 17% VAT however, the customs officerrs here hit you harder for non-essential items sometimes as much as 50% especially when they don;t know or understand the tech... those reapberry pi units I ordered took a month in the bonds cause they didn't know what they were.

Baffle size also makes a difference as well. If you used thicker panels to make the speaker, but you aimed to keep the same net volume, the baffle size will end up a bit larger. Also for thick baffles, DIYers tend to chamfer out the back of the driver cutouts as the midrange can be negatively impacted otherwise. And MDF and plywood are normally used for speaker boxes for dimensional stability (they don't usually expand or contract due to slight moisture chances, which could result in split seams). But hey, if the speakers sound and look great, that's really all that matters! Just don't get a mic and use REW to measure them - you don't want to disappear down THAT rabbit hole, LOL.

Great video, fun build, gorgeous results! As a total aside, I had a cringe moment when I saw that you'd cozied your receiver flush against the bottom of the entertainment center. Most are top-vented in order to achieve the manufacturer's designed and tested passive thermal dissipation threshold. Covering those holes up or squeezing the receiver into a tight space prevents proper dissipation of the heat it builds up and will shorten the life of the internal components and/or lead to thermal protection auto-shutoff kicking in when running things at a theatrical volume or for long listening sessions. Of course, this video is over 2 years old and I'm just seeing it now, so you've either figured this out the hard way by now, or you never drive the receiver hard enough for it to matter, or you happen to have a receiver that can manage to dissipate enough heat through the upper side vents for it not to be a significant issue. Regardless of which it is, as a best practice for those following along at home.... tl;dr - don't crowd your receiver or other warm electronics. let them breathe the free air!

1:30 I love the honesty ! You just earned a ton of respect before you even started building anything

@ZacBuilds

2 жыл бұрын

Thanks man! I try to be as transparent as possible with these vids

Don’t know much about audio snobs, but I consider my collection of audio KNOBS pretty impressive ;)

@dvy6660

3 жыл бұрын

Lmao

You need to drill one or two holes to allow sawdust to escape when drilling big holes. This way you will not burn the material next time.

@nubie1100

3 жыл бұрын

This is the way

@Halostarrer78

3 жыл бұрын

LOOK AT THE CUTE LITTLE DOGGY !!!!!! ROOF ROOF !!

@1pcfred

2 жыл бұрын

That's one way to do it. I just make a pin jig for my router for cutting holes for speakers.

The Buy VS DIY CBA depends entirely upon your skills and the project in question... Since, even if you account for your time as a valuable factor, if the project fits your skill sets well, and you are comfortable with material modification, even cheaper materials can become more usable, depending on your skill level and ingenuity... However, all projects benefit from higher quality materials, since the degree you can cut corners is limited by the cumulative quality of the materials. So basically bad materials have no room for any further cost cutting measures, but excellent ones can accommodate more user error than anything else. That's why many DIY projects can't compete with mass production... Mass production has already had all of those cost cutting steps executed to the degree that is possible, and volume makes up for the cumulative costs.

I have a pair of overnights. Got the flat packs on Parts-Express and they sound sick! So much bass and clarity from such a small package. Also used the Hi-Vi and Vifa to build and mod my SB Pioneers Bookshelf’s. What a difference. Phill made the crossover for them.

This is really the most beautifully put together system and the colour is drop dead beat amazing

I've got to ask, how does your receiver/amp dissipate heat since you have it mounted up against the bottom of a shelf? Most of the heat normally goes up through the top of an amp.

@lorsheckmolseh3345

2 жыл бұрын

Wood and heat (i.e. of blowing components, because of missing cooling) aren't a good combination.

@sampsalol

2 жыл бұрын

@@johnkarapita437 Definitely not good enough.

@iankphone

2 жыл бұрын

@@sampsalol Correct. That thing is cooking under there. Looks cool.

@aveen1968

2 жыл бұрын

Solution would be to open it up and put in some PC fans(receivers are generally vented on the side as well) not ideal but better than cooking =)

@sixstringsdown1

2 жыл бұрын

@Simon Mwangi It was a DENON, no?

Amazing build Zac these lil drivers are by far my fav to build with

There no talk of money in the video. The hardest part of making that determination is finding out a comparison model to whatever you have built.

The more you get used to quality audio the more "audiophile" you'll become. That's what happened with me.

@saheltaja

3 жыл бұрын

You start to notice the little things you didn't know were there, and thus didn't know to miss.

@justingillette8287

2 жыл бұрын

Its a blessing and a curse really. It is like test driving a good sports car or luxury car then driving home in a busted hooptie. Once you hear good sound you can never go back. the bar is permanently raised after your ears are exposed to better quality sound. the problem is it gets expensive real quick and you enjoy concerts, cinemas, dances etc less and less because of the often bad sound quality presented. Even in a good theater, the best sound quality is not always present, most big brand cinemas only have low frequency extension to about 50hz, that is sub par you ask me.

@bigcrackrock

2 жыл бұрын

@@justingillette8287 And when you see people using the built in speakers on their TV you want to cry. Especially when they spend all kinds of money on media and are missing half the experience. They were never that good but TV speakers now days are complete garb-o. Just a hundred dollar pair of powered Edison speakers are going to be leagues better. Of course it likely wont only be 100 dollars because you'll catch the disease and be buying a surround sound system next.

@Zac Builds -Great video and great looking speaker(s). Nothing like being proud of your own DIY builds like that. I went with Klipsch black vinyl series so hard to DYI that look. The center channel is two 5" speakers and a center horn. I think that is a great size and combo for center channel audio. You would be surprised at how big the audio is coming from the center channel. Just wanted to say (and I'm sure you realize this) but It's crazy blocking the top air vents of your receiver like that. I didn't like how my 2020 receiver didn't have any internal fans. You would think by now they would incorporate fans and dust filers but of course they would rather see these die prematurely. I purchased a specialized fan device that somewhat matches the look of a audio component but fairly thin. It sits on top and senses heat out put, turning on it's 3 fans when it gets to a certain temp. Mine vents to the top but they have some that vent to the front. Hard mount this to the receiver and then under shelf mount it like you have it now.

I did something exactly like this 6 years ago, also have a Denon 7.1 system. Audio snob confirmed, welcome to the club

Amazing project and demonstration! Try this for a noticeable difference..decouple your speakers from the surface they are on. A lot of their energy is being absorbed into the TV stand.

I think that quote from Wall-E sums it up " I don't want to survive; I want to live"

Your speakers look great, my only concern is the receiver placement. They dissipate a lot of heat and most goes up through the top, I have mine with about 3 inches of space above it and it still heats up quite a bit. It looks like you have maybe 1/2 inch of space above yours. I would definitely suggest making a proper floating shelf below it and lowering it a couple inches at least.

@bomcalister7252

2 жыл бұрын

My question is this....been building speakers for years and going home media systems and business systems. How can you say that DIY speakers cost the same as pre made? Not hating on you by any means but I can build speakers that out perform and out last their counterparts for a fraction of the price and have been doing do for years. You really need to do a lot more research before saying anything like that. Plus while your a/v mounting was cool it was no where near practical or good for your equipment. You seem to have a great knowledge for building but definitely need more of an electronics background before doing anything like your home set up again.

@estebanp6391

2 жыл бұрын

I was going to comment exactly the same. Need some clearance up in the receiver.

When using hole saws, you need to set your drill press at the lowest speed / highest torque setting. Also, you can break woofers by playing them outside of their enclosure. Woofers built for sealed or ported enclosures have very minimal suspension, the air inside the box acts as their real suspension. So if you drive them outside of the box, there's not enough holding the coil back and it can damage itself by exceeding it's max excursion. So you've got to test speakers AFTER you've built it.

it looks good. BTW if you are worried about mdf vs. hardwood, just make the speaker out of mdf, then cover it in a thin hardwood veneer, or even a thick hardwood covering. But I'm pretty sure if someone made 2 speakers, one out of 3/4" plywood, and one out of 3/4" mdf, and everything else was equal- I doubt anyone can hear the difference. Especially not with all the ambient noise all around.

Duuuuuude i thought you had 1.5mill subs until someone mentionend you didnt, looooove this. Moving into an apartment when moving school and thinking of making a lot of my own furniture

Also great intro. Really went the mile for the sunrise. Nice...

@ZacBuilds

3 жыл бұрын

Thanks! Had to wake up at 5am to do that sequence but it was worth it!

I am happy to chime in here. First of all for not being a proclaimed sound expert you sure do a good job. Second the way to clarify where you are ignorant shows some integrity and humility. I like that. I personally lay claim to being a sound expert. I have been in the game my whole life. Having boasted myself sufficient, I wish to clarify that this video content is pretty well done. i would also argue that DIY can save you money. There is not likely any speaker even close to the cost of this build that uses real wood. the quality of internal components, the speakers, the filter circuit, the system design, the custom element, the bragging rights, this speaker is worth $1000 easy. Now I realize that you could not sell it for that money but that is not the only form of value an object can have, think of all the conversations that get to be had over that sexy little sound system. That is worth something right. I would comment about the audio snob bit! Well Zac hit the nail right on the head, and right between my eyes. It is all true!

Before I watch this, I'll say the title caught my attention. Because DIY means doing it your own way, which is often hard to find, and usually done well, not economically... now to watch something made well I hope :)

@HarrySinanian

2 жыл бұрын

Love the audio work, tool noise reduction is a welcomed change. Overall really enjoyable and would just grab some closeups to cut away from the jump cuts while you're narrating. Nice work !

That build looks 🔥🔥! And thanks for using our song

@ZacBuilds

3 жыл бұрын

Thanks and my pleasure! I had your song saved in my Epidemic Sounds playlist since it first came out. I was just waiting for the perfect video for it. Keep up the good work!

@theelichtje3

3 жыл бұрын

Some great stuff here! You've got a new follower :)

@SIlverwolf-fy8ci

3 жыл бұрын

Whats the song called. Sounds good. Any place where i can purchase it?

@raghavan_4

3 жыл бұрын

@@theelichtje3 yo bro me too. Pretty real words that ya used in the vid

@JonthaLinks

3 жыл бұрын

@@SIlverwolf-fy8ci thanks! it's called Pretty Carolina, it's available on most streaming platforms! And we have a music video here on KZread

Hi From Australia. Love your videos. The speaker bar is gorgeous, as is everything you make.

@ZacBuilds

3 жыл бұрын

Thanks Luke!

Nice Job! Well done! That speaker cabinet looks amazing. I've been a fan of those Hivi's since when I bought my first pair in 2008. Enjoy!

It really depends on the person and the materials for example last summer I made a whole complete Hi-Fi surround system from recycled wood that I got from an old barn and some speakers that I got laying around and it cost me almost nothing And the most funny thing is that it looks like I spent a fortune on it Short answer is that recycling can save you a lot you just got to be creative with it

"DIY Doesn't Save You Money" may be true in some instances, one advantage of DIY is it allows you to TUNE the output sound to your satisfaction, and then you change it(freq curve or drivers or etc) when your mood or sound impression changes.

You shoud have few millions subs.. amazing work!

You could probably improve the sound quality significantly by mounting the drivers closer together (particularly the centre drivers to the tweeter to reduce interference near the crossover frequency), rotating the second air core inductor 90degrees on the crossover (to reduce the inductive coupling) and by flush mounting the baffle to the front of the box instead of using a dado (to reduce diffraction from the edge). Looks like a really nice build.

@nathanblanchard8897

2 жыл бұрын

It sounds like you know a ton more than I do, but he did mount the speakers in the way suggested by the kit 🤷🏼‍♂️ not sure how much testing they did to make sure it was the best way to do it or how much sound quality they gave up in favor of aesthetics, but it’d be interesting to see how much your suggestions would help!

@cesarcaro6767

2 жыл бұрын

I had the same thoughts. In my opinion, the edge diffraction will by far be the biggest drawback, far bigger than inductive coupling.

What an EPIC intro for a KZread video!

@ZacBuilds

2 жыл бұрын

Thanks! I spent a lot time on that one haha

Love the look!

Just watched your video and awesome build, just a small FYI, whenever you use natural wood for an enclosure, it helps to pour fiberglass resin onto the inner part, let it coat all the sides and pour out the rest. This helps seal any non-dense areas and seals the inner chamber better. Hope it helps.

@LBCAndrew

2 жыл бұрын

It will crack with or without the fiberglass resin. Speakers shouldn't be made out of hardwood like this.

Exactly ... D.I.Y isn't cheaper (most of the time) but it is awesome building your own, getting of the couch, away from the screen and net . Nice build, Nice video, Nice commentary ♡

Awesome video. Just came across it. I planned on building a entertainment system with built in center and shelf speakers out of oak and walnut. Lover the copper klipse speakers cause they’d match the walnut nicely. Now I know where to get the speakers I’ve been looking for. And the rest of my systems speakers as well.

You have a really nice setup! The one thing you may want to think about is your receiver placement; having it mounted like that can cause quite a bit of heat to build up in it. Maybe add a USB powered computer fan to the side of the receiver to aide in cooling.

@kyakfsh

3 жыл бұрын

That's what caught my eye, too. Do you receiver a favor and allow the heat to escape. Otherwise you'll be replacing it sooner rather than later.

oh i could smell the burning MDF on the hole saw bit :p

I made the center channel speaker for my sound system and it cost me exactly $0. I used some scrap particle board I found in a trailer in my backyard and I salvaged the drivers from some old PC speakers I had lying around. I even made the binding posts myself. I literally spent no money out of my pocket whatsoever. Does it look as nice as the speaker in this video? No way! Is it good enough for me? You bet! Did I save money? Absolutely. It is all in how you plan and execute a project what it costs.

RIP Meniscus Audio. They were very local to me and will be missed. Madison and Parts Express are still fantastic though. Yes I know I'm two years late, but I had to chime in when I heard him mention Meniscus

Why is your amp mounted like that? It needs the top open to radiate heat.

I would love to do a project like this for my desk. I only have speakers on my monitors and they're about as good as a tin can on a string 😂 Awesome video!

Really nice something you made with your own hands its rewarding,I always wanted to do something like that I need all the tools when they took my garage all the tools disappeared I looked away for a few hours

I actually use a pair of home built speakers my dad made over 20 years ago with 6inch drivers. It was part of a 5.1 sound system he built in our old house, but he had to take it apart when we moved. He still had a spare driver so I built myself a centre channel speaker, a single 6inch driver, you don't need anything more complicated and I saved a fair amount of money reusing old parts that still work.

EXCUSE ME THIS EDIT 🔥 AND THE SPEAKER!

@ZacBuilds

3 жыл бұрын

Thanks Soph! :)

Beautiful speakers Zac & great tutorial video, my own opinion is that you mentioned $300 I think you would pay way more than that for the same quality solid walnut speakers with decent drivers plus you can enjoy that kinda smug feeling knowing that you created them yourself & nobody on the planet has the same, win win, well worth the time & money you spent minus the income from your excellent video’s 👍🇬🇧🇺🇸

@sparkeyjones6261

2 жыл бұрын

He would pay 10x that to even look at a speaker constructed with solid walnut ;)

Sick job on the speaker man! LOVED the edit!

I've been doing woodworking with furniture building and restoration for well over 5 years now and I totally agree with you. DIY is not cheaper than buying. No matter what kind of DIY. Even the crappy DIY isn't cheaper, because it requires lots of redoing at a constant rate, in order to look fresh and new, due to the low quality of cheap DIY. So over time, the cheap DIY is actually even more expensive than doing the high quality DIY from the get go. But no DIY in any field will be cheaper than just buying it. DIY must be done for the sheer joy of building and making things. Money has to be the last consideration when choosing to do DIY. DIY is not a chance to save money. It's a chance for making something truly unique that only you have and that you can be proud about making for many years to come. Do it for the kicks it gives you. Any other reason would be a waste of your time and money

@jonathansturm4163

2 жыл бұрын

In 2000 I purchased a pair of VAF DC-X speaker kits for $AU1,300 some $AU300 less than prebuilt. They took me a leisurely 3 hours to assemble (I forgot to charge my electric screwdriver). Currently they are worth $AU1,000 on the second-hand market though seeing them available is rare despite VAF selling more than 10,000 pairs over the years.

Missed the premiere but enjoyed the build! Cheers!

@ZacBuilds

3 жыл бұрын

Thanks Scott! Much appreciated man

oh man that speaker looks awesome!! being an audio snob doesn’t sound half bad honestly haha.

I've rarely saved a ton of money on DIY projects but what I have done is increased the quality of my possessions. I know what I've put in and I know I've put in quality parts.

Una observación, Zac. Cuando los altavoces van atornillados a la caja por cuatro tornillos, quedan muy mal hacerlo en forma de cruz como los has colocado en el vídeo. Mejor hacerlo en diagonal, como si cada uno de los tornillos fuese en la esquina de un cuadrado. Si los altavoces van con cinco tornillos, entonces el primero sí va colocado en la parte de arriba. Otra observación, desaconsejo realizar los taladros con los altavoces como plantilla. Lo más leve que puede ocurrir es que se dañe la pintura del altavoz y lo peor es que por descuido o accidente se dañe el cono o el aro amortiguador. Aconsejo marcar los taladros y retirar los altavoces antes de realizar los taladros. Saludos

How is that AV receiver not overheating it cools by natural convection, needs some space on top for escaping hot air. maybe not a problem with a light load but low impedance speakers plus high volume will heat that puppy up. Nice Video.

Hey man, great video. I've never heard of that CV glue so you really helped me out with that. I have my receiver mounted similarly under my desk. I have noticed that quite a bit of heat comes off of it, so I changed my mount to add a couple inches of gap between the top and the wood. You might want to do the same to extend the life of it.

Speakers including some good ones are really common at the second hand shops I go to. So cheap I've purchased way more than I need. If I ever want to harvest components for a DIY build I have a nice inventory too.

The speakers look great. Although the pronounced overhang of the front baffle will negatively effect the sound. The sound needs to radiate beyond the edge of the cabinets to avoid diffraction. This will cause phasing problems and cancel out certain frequencies. The drivers should also be flush mounted to the baffle, routed in, to avoid the same issue. I know you mentioned it, but it really is important. You will see many speakers designed with rounded edges, or even an entirely rounded front baffle to avoid this problem. You will also regret using solid wood. If there are changes in humidity and you get any cracks, checking or warping the sound will be ruined. You clearly have some great woodworking ability, and you'd be able to build some beautiful cabinets without compromising sound quality. I think there are some awesome speaker builds in your future!

@1pcfred

2 жыл бұрын

Like he said he doesn't have audiophile ears. For him it was important to match the design detail of the other speakers he'd made. He's a very put together kind of a guy, you know?

the speakers look mint AF 🔥🔥

@1pcfred

2 жыл бұрын

Speakers are made to be heard and not seen.

The new addition and setup looks great mister! I run a Denon Reciever as well (love it) but if yours puts off as much heat as mine you might run into problems with the clearance you have on the top of your Reciever. I know your running a separate powered sub so you’re likely not needing too too much power but just food for thought if you run into any over heating problems in the future. Thanks and great video!!

@3dnutta

3 жыл бұрын

Came here on that point too, nice job tho!

@Zac they're awesome!! I was thrilled... I want to build my own. :) Like you said... it's not about saving money but enjoying building it.

These also make great porch speakers. I have built two pair , one for my daughter and another for me. Paul is not only a great speaker designer, he is an all around good guy. Thanks Paul.

@sparkeyjones6261

2 жыл бұрын

You put center channel home theater speakers on your porch? In pairs?

@rolliekelly6783

2 жыл бұрын

@@sparkeyjones6261 yes,they seem to produce a wider stage.

I'd argue there is no way you'd get a similar product for anywhere near that cost.

@Arterexius

3 жыл бұрын

You won't, but how much does it cost in materials to get to such a level where you can make these products? It's only really ever the tools that are investments. Everything else are expenses and unless you frequently work with solid woods and higher quality materials, then they'd be hideously expensive for a single project. That's why DIY doesn't save you money. For creators who love to build stuff it will eventually, but for those who just want to make a few things because they think it's cheaper. They will end up paying far more than if they just bought it. DIY hand crafting cannot beat mass production in terms of price per piece

@thomaskletzl6493

3 жыл бұрын

@@Arterexius i dont know if this is true you dont need many thinks you can do it with a table saw some glue and thats it a router would be nice but not needed these thinks you can buy for 300 dollars

You're suffocating that poor receiver. :(

Actually heating the solder and dripping it on to the connection is worse than just being sloppy. If the wires are not actually hot enough to melt the solder, it will not guarantee a good connection. It may seem to work initially because the wires are touching each other, but eventually it can fail as oxidation sets in and vibration loosens things. This is called a "cold solder joint", and it's a real no-no. Your demonstration of the correct way is excellent.

Dude has a great point there about audio snob. I got into custom keyboards a bit over a year ago, and after building my own lubed linear mechanical one I REALLY notice if I am using something else

Liked the video before watching. Your content is great. Sick intro

@ZacBuilds

3 жыл бұрын

You're the best Mason, thanks! Glad you liked the intro too, I had to get at 5am to shoot it haha

I told my wife I was gonna make one of these. She was questioning why it was gonna cost $2000000.

Clean build and setup. Only using see is channel separation based on how wide the front center channel is

Very nice build for a newbie or a vet at building speakers. I’ve been building and designing speakers for over 40 years. And yes you can call me an audio snob. Lol. I’d like to point out something with your AVR, great idea with out you mounted it, I may give it a try with a new build myself. The only thing I’d like to point out ( and this is very important) . The way you mounted it, you have blocked off all the air flow for it. I k ow my monster Marantz AVR would over heat in under 5 or 10 minutes and shut down. Not to mention just how much of the AVR’s life span your taking away from it. You always need to make this a top priority with anything that’s Electronic especially audio equipment, is that they need adequate airflow Wetherbee passive or forced air flow from a fan of some type. Even if you have some holes cut in the shelf that the AVR is mounted to would not be adequate. And remember the heat flows up. Other then this very important design Flaw your work is pretty impressive.

Lol it’s so funny, that I used both of the songs you used in the intro for a commercial 😅

@ZacBuilds

2 жыл бұрын

Great minds think alike, they're awesome songs!

Great job producing and building, enjoy the good sounds.

I built a 5.1 set, consisting of 4x 4" mid bass and 2x 3" extended range mid/tweeters in each front speaker lcr, mounted in-wall in bake boards made of poplar stained with danish oil. The rear use half as many of the same drivers. Custom crossovers. Each component was inexpensive, but the number of drivers and capacitors and inductors needed drive the price way higher than just buying a nice set of in-walls. They do sounds very good, but I'm feeling like I should have chosen midbass with stronger punch, or used boxes as I originally planned. I'm also considering building a seemless flush-in kit or maybe a vintage styled grille.

One thing that I think makes building your own speaker system worth it is that you know how to fix it if anything breaks. The knowledge carries over to plug and play speaker systems.

@adrianmcneil1099

Жыл бұрын

And when people ask where you got those impressive speakers from, you get to flex. 💪😁