Dayton Audio Reference Wi-Fi / Bluetooth Soundbar | Arylic Amp | DIY | Walnut Hardwood Metal Legs
Ойын-сауық
The Bar - Walnut Hardwood Custom Made Soundbar using the Arylic Up2Stream AMP V4, Dayton Audio 4" Reference Series Woofers model RS-100 4 ohms and Dayton Audio 1 1/8" Soft Dome Tweeters model ND28F 6 Ohms.
U$ 350.00 Approximately cost for parts in the USA
MATERIALS:
Maple Plywood, Walnut, Metal, Drivers, X-over Components, Connectors, Ports.
Walnut hardwood case with Plywood front baffle and rear baffle. Finished with Good Stuff wax. Steel Metal modern legs treated with Evaporust, primed, painted and clear coated on matte black.
LINKS:
EUROPE:
Dayton Audio RS100 Full-Range driver:
ndt5.net/c/?si=14570&li=16273...
Dayton Audio ND28F Soft-Dome Tweeter:
ndt5.net/c/?si=14570&li=16273...
Arylic Up2Stream AMP V4:
ndt5.net/c/?si=14570&li=16273...
Ports:
ndt5.net/c/?si=14570&li=16273...
Sonic Barrier:
ndt5.net/c/?si=14570&li=16273...
US:
Dayton Audio RS100 Full-Range driver:
www.parts-express.com/Dayton-...
Dayton Audio ND28F Soft-Dome Tweeter:
www.parts-express.com/Dayton-...
Arylic Up2Stream AMP V4:
amzn.to/3RSU3Um
Ports:
amzn.to/3BLXSFi
Sonic Barrier:
www.parts-express.com/Sonic-B...
Speaker Wire - Copper Clad Aluminum:
amzn.to/3LlJbKD
Speaker Wire - Oxygen Free Copper:
amzn.to/39tNkPe
ROUTER BITS FOR FRONT BAFFLE:
5/8" Radius Rounding Over Bit:
amzn.to/3UlOnUx
1" Radius Rounding Over Bit:
amzn.to/3QQjt3v
3/8" Rabbeting Bit Bearing Set:
amzn.to/3Bsa2lh
MEASUREMENTS:
Speaker Outside - 13.6 x 106.8 x 27.6 cm
Box Internal - 38.2 x 9.8 x 24 cm (each side)
Box Volume - 9 Liters aprox. (each side)
BASIC TOOLS:
Plam Sander: amzn.to/39wtgvy
Compressor: amzn.to/3wAxB90
Nail Gun: amzn.to/3LrlYqm
Circular Saw: amzn.to/3yNB7Ql
Drill Kit: amzn.to/39osBMR
Drill Bits: amzn.to/3llbApI
Screwdriver Bits: amzn.to/3MmMgLS
Router: amzn.to/3wyyHCb
Router Circle Jig: amzn.to/3MuZLcw
Router Bit Set: amzn.to/3FRFriK
Clamps: amzn.to/3FR9IhO
Quick Clamps: amzn.to/3FSRufH
Soldering Station: amzn.to/3PCFLXk
INSTAGRAM: @sonnoradesign
Пікірлер: 103
Beautiful design!! So happy to see another video from you 👏👏
@sonnoradesign
Жыл бұрын
Thanks for watching!
Nice to see you back ,great job .
@sonnoradesign
Жыл бұрын
Good to be back! Thanks Nicholas
Love you're design and craftsmanship great job
@sonnoradesign
Жыл бұрын
Thanks Francois!! Love this one
Another great design! Glad you got it all sorted out and took the setbacks in stride. Always enjoy watching your content and hope you are feeling well. - Tom Z
@sonnoradesign
Жыл бұрын
Thanks Tom! Good to hear from you my friend.
Great design! I’ve been using those 4” Dayton’s in my office speakers running full range, you gotta point them just right to get the sweet spot. Thanks for sharing
@sonnoradesign
Жыл бұрын
That’s right!! And they sound great! I love those drivers. Thanks for watching.
Wow dude ! Never seen someone so skillful and genius 😮
@sonnoradesign
5 ай бұрын
Thanks for the input Dennis.
This soundbar is awesome ! Super job !!! 👏
@sonnoradesign
Жыл бұрын
Thanks Marc!
Awesome build! Thans for mentioning SoundImports 👍
@sonnoradesign
Жыл бұрын
Thanks for watching!!
Your design is the best!
@sonnoradesign
Жыл бұрын
Thanks Marek!!
Great video - the speaker looks great! Really enjoyed the music too😁
@sonnoradesign
Жыл бұрын
Thanks Derek!!
Beautiful final product!,
@sonnoradesign
Жыл бұрын
Thanks Pedro!
Beautiful job!!!! 👏👏👏👏👏
@sonnoradesign
Жыл бұрын
Thanks for watching!!!
Amazing job soundman master 💗💗💗
@sonnoradesign
Жыл бұрын
Thanks Mario!!
wow, it looks awesome!!!
@sonnoradesign
Жыл бұрын
Thanks Arturo!!
Great energy on this channel..
@sonnoradesign
Жыл бұрын
Right!! Thanks my friend!! It should show in the video, during the process…
Old School Fabrication. I love it. Art Bolanos, Houston Texas Wow Very Artistic.
@sonnoradesign
Жыл бұрын
Thanks Arturo!
Haha, i love you dude. I just got into audio a few weeks ago and found your channel, and im loving it. Super funny even tho you dont dell jokes, haha.
@sonnoradesign
10 ай бұрын
Hey Marcus!! Thanks for watching my friend!! Cheers
I´am a great fan of you, talking from Brazil. I did not undestand how you made this curve finishing inside. The final appearance is fantastic!
@sonnoradesign
Жыл бұрын
Fala André. Que bom! Qual curva? No painel da frente? Vou postar um vídeo em breve.
@andreluisciscato1173
Жыл бұрын
@@sonnoradesign Então vc fala português!!! Aquela aparência frontal com as curvas nos cantos. Do lado de fora entendi, do lado de dentro do canto não peguei legal. Fiz um clone da sua caixa com as pernas de cadeira.
@sonnoradesign
Жыл бұрын
@@andreluisciscato1173 saquei. Então, a curva de dentro vai ser feita pela broca da tupia, ou router. Eu tô fazendo um vídeo só para mostrar isso. Já já sai!!
Excelente, Maestro!!! saludos desde Argentina
@sonnoradesign
Ай бұрын
Woohooo! Gracias Pablo!!!
Great video! Just subbed
@sonnoradesign
Жыл бұрын
Thanks and welcome!
Nothing says exotic and European like Dayton "Ohio" Audio, lol. Joking aside, turned out amazing as usual, and its hard to argue with the Dayton RS series. And bravo for including the F ups, keeps it more grounded and real not to mention entertaing. Also I'm gona look into that Good Stuff wax finish for my walnut projects, that finish looks amazing and exactly what I'm aiming for.
@sonnoradesign
Жыл бұрын
Thanks Phillip! Now you know my secret!! Xshitt. The Good Stuff!
That is really a piece of art. I was thinking to do something like that to my daughters apartment. I just nee time for it, and working 3 jobs doesn't leave much fee time 😂
@sonnoradesign
Жыл бұрын
Haha! Right, takes a little bit of time.
@caide
Жыл бұрын
@@sonnoradesign BTW Have you done any videos about subwoofers? How about a nice subwoofer for music. Like Dayton Reference 10" HF with plate amplifier 😛
@sonnoradesign
Жыл бұрын
I’m gonna make subs soon! Haven’t had the need yet but it’s on the list for sure!
@caide
Жыл бұрын
@@sonnoradesign That is nice to hear!
wow, great, just like factory stuff
you rule man!
@sonnoradesign
Жыл бұрын
Thanks!
Nice
@sonnoradesign
9 ай бұрын
Thanks for watching!!!
Good Job my friend hay ya yayyy caramba
@sonnoradesign
Жыл бұрын
Woohoo
I really like your project. Can you provide details and parameters of the crossover, mainly the coils, their resistance and wire thickness?
Great work, wow....may I give a tip for inspiration; check Kinma Hypersonic soundbars (and amps and so on) they are ok and theire looks to copy, why not....
@sonnoradesign
9 ай бұрын
Yeah. Let me check that….
Muito maneiro seu trabalho show,meu sonho é ter todas essas ferramentas mais não sei se você criativo, mais me amarro em tools
@sonnoradesign
Жыл бұрын
Valeu! Me amarro também!
Seus videos são muito bons, até to pensando em fazer uma pra mim. Vlw, tudo de bom e Deus te abençoe
@sonnoradesign
8 ай бұрын
Valeu meu parceiro!! Manda bala que essa toca muito bem!
@nogardxd18
8 ай бұрын
o unico problema e que aqui no Brasil, é tudo muito caro@@sonnoradesign
@sonnoradesign
7 ай бұрын
Eu entendo. Tem muita coisa boa por aí acredito. Selenium, Bravox, não sei se estão no mercado ainda. AliExpress chega aí?
I’m looking to building a sound bar for the bedroom television and came across your channel in doing my research. Although too large for my need your project came out wonderfully. Will you ever show anything about crossover design?
@sonnoradesign
10 ай бұрын
Hey JC. Yeah! I’m gonna make crossover videos soon. Everyone seems to want that!!! Let’s do it.
Nice work they look awesome. Did you think about adding a sub in the same box? Those Rs100-4 can go in a tiny sealed box and still sound good(obviously with a sub backing them up).
@sonnoradesign
Жыл бұрын
Hello Harry. It plays enough bass on that box, not a sub woofer though but those little drivers are impressive.
I really liked the project and his skill with wood. I would like to do it but as two separate speakers without the amplifier. What do you think?
@sonnoradesign
11 күн бұрын
All doable man. The boxes are separated anyways. Works great!
Wow, amazing, its perfect...question: do you sell builds or do you build on demand/order? Its Top, SUPERDUPER!!
@sonnoradesign
9 ай бұрын
Thanks Volki!!! I sell some eventually. I used to make to order but not anymore.
The " Ai caramba " that you said tells me you are from my country . Kkkkkk
@sonnoradesign
Жыл бұрын
That’s right!! Brazil?
I would be interested in a diy 3.0 soundbar would you use a woofer tweeter set, or maybe a version with just full range drivers
@sonnoradesign
5 ай бұрын
Either one works well. Depending on the full range size you will need more higher frequency bass to cover the lack of lower frequencies from the FR. those drivers play pretty well, good bass for the size. A 10 inch sub would help a lot
Thank you very much for sharing this video!Very beautiful and impressive speaker. Your carpentry skills and appearance design are amazing. I have a question about the volume of the bass box and the length and width of the front panel. Would you like to share?
@sonnoradesign
Жыл бұрын
Hello! Thanks for watching! Yes, I’ve shared the measurements on the video description. You can take a look. It’s all there.
@Michael-mai
Жыл бұрын
Thank you so much and looking forward to seeing more of your great works。@@sonnoradesign
Hey.. how did you achieve the internal radius on the front rebate?
@sonnoradesign
Жыл бұрын
There is a video where I show exactly how to inlay the front panel!! Check it out!
Can you post the crossover schematic? Cant seem to find that
@sonnoradesign
Жыл бұрын
Hey Bob. It’s at 26:34 min in the video!
That was not sound from speaker but added music to video so what's the catch?
@sonnoradesign
6 ай бұрын
Hello there! Thanks for watching! It’s a copyright issue. I can’t play my test songs on KZread cause I’ll get a strike, but thanks for the input. I might figure out a way to capture the real sound!
Curto demais esses projetos, de caixinhas de som Bluetooth mas não sei o que significa DIY.
@sonnoradesign
Жыл бұрын
Fala Ademilton. Diy significa Do it yourself, faça você mesmo em português! Valeu por assistir.
Hola mi querido amigo, soy Fer de Cancún, me encantó este proyecto, yo creo que va a ser el primero, te quiero hacer una pregunta sobre la ma idea pero tienes un correo para enviarte toda la idea son bocinas Bluetooth varias para ambientar un recinto, un jardín etc. Sin cables, me gustaría pasarte mi idea y si es posible. Saludos y que buen trabajo
@sonnoradesign
Жыл бұрын
Hola amigo! Podes mandar-me um e-mail que ló ajudo em el projeto!!
@Ferdy-Perezlara
Жыл бұрын
@@sonnoradesign hola Bernardo, busque tu correo, pero no lo encontré, hasta en Instagram lo busqué
@sonnoradesign
10 ай бұрын
Hola Fernando. Sonnoradesign@gmail.com
Soundtest?
@sonnoradesign
8 ай бұрын
Hm, this one is gone.
Sorry it's equal to the rebate cutter rad..
Could you share your drawings?
@sonnoradesign
3 ай бұрын
I don’t have it on 3d cad yet. I’ll have it one day hopefully.
what's a plam sander? 😆
@sonnoradesign
3 күн бұрын
It’s that random orbital sander that fits in your hand. Like a flatter one.
@threepe0
3 күн бұрын
@@sonnoradesign that’s a palm sander. Was just having a giggle at the typo in the description
@sonnoradesign
3 күн бұрын
@@threepe0hahaha. Double typo. Shoot!!!
Sorry I don’t think so. Why not just speak in a normal tone? I can’t sit through it all SMH
@sonnoradesign
10 ай бұрын
Thanks for the input.