Not the most beautiful welds, but them beootches ain't gonna fail!!!! You do fantastic work Broski!

@hondaresource

Жыл бұрын

Thank you man. They'll hold up

Wow! Please build for my 1989 Honda crx si and 1991 crx HF. Love it!

Great content always wanted to see how this was done

@hondaresource

Жыл бұрын

yessir!

Great content, just Ordered a set of spherical bushings.

@hondaresource

Жыл бұрын

Thank you! Order received 🤟

Man those bushings are a deal on your web site. Everyone else wants 50 to 100 bucks more. Good show, always waiting for next up load. I'm so close on my crv kswap. Just a couple more small things and then ready for that tune. Hoping Santa will bring me a sidewinder turbo manifold. I've been good...(enough). Lol

@hondaresource

Жыл бұрын

Nice! I thought about putting a turbo on my crv but decided against it

I love this channel, your shirt had lol'ing.

“Still gonnaaa sendd ittttt” had me dyingg😂

@hondaresource

5 ай бұрын

😂

Awesome thanks bud

@hondaresource

Жыл бұрын

🤟

Just found your channel... Sub'd!

@hondaresource

Жыл бұрын

Glad to have you here!

just found you're channel you do awesome work man was wondering what rotors and calipers you use on rear trailing arms

@hondaresource

11 ай бұрын

thank you man! I just used integra rear disc setup.

@brendanocarroll9181

11 ай бұрын

@@hondaresource thank you did you use dc2 parts

@hondaresource

11 ай бұрын

Yes, those will work fine

to retain some rigidity, i wouldnt cut the arm all the way through for the extra bolt. theres plenty of room just notching that area. good shit though.

Thanks for the great info. I'll be picking up your parts for my project soon. Would 5 Lug CRV hubs also work? I was already planning to use CRV Knuckles on my front for 5 lugs on my teggy

@hondaresource

8 ай бұрын

There is a 5 lug version as well

where do i buy the palm adapter plates

The link to the plates doesn't seem to work anymore. I need to find a 5 lug version with the same bolt pattern as the Insight hub and bearing assembly. Looking for a 5 lug AWD solution where I can easily find replacement parts. Might have to look at the Fit.

@hondaresource

2 ай бұрын

I quit selling them on my website, I can still get them. I can provide you with the info you need for 5 lug as well. Just shoot my an email. phillip@thehondaresource.com

Hey Phillip, sweet Element! Picked up an '03 EX myself, runs like crap, shaking and hunting revs up and down at idle-any thoughts? Suspect throttle body gasket. Thanks Phillip. 👍🤙

@hondaresource

Жыл бұрын

Intake leak. Probably the idle air control valve

Awesome video

@hondaresource

Жыл бұрын

Thank you

Interesting 🤔 , as there any extra needed to work with the wagovan rear axle

@hondaresource

Жыл бұрын

Nope

Would the Inight Hubs you linked work on wagon cv joint ??

@hondaresource

3 ай бұрын

I'm not sure.

What other wheel hubs would work? I’m in Pakistan and don’t have access to insight hubs. Would Eg ones work?

@hondaresource

Жыл бұрын

I think only insight

What hubs can I use if it’s. A k series sdiff and axles the ones u used not sure if b or k but are out of stock

@94GSR

8 ай бұрын

K series 2000 crv for 4 lug and 2007 for 5 lug hub

Hello would you be able to tell me the thickness of the diy awd plates please?

@hondaresource

5 ай бұрын

I've never measured a set of them

@jordanaustin2932

5 ай бұрын

Could you by any chance please? ​@hondaresource

Hey just tried to do the RD1 CRV rear disc break conversion. When ever I bleed the brakes they are still spongy when starting the car. All the bubbles are out, never blead dry. Any leads?

@hondaresource

Жыл бұрын

Did you bleed it with the rear calipers off and the bleeder screw up

@drunkn3450

Жыл бұрын

@@hondaresource You mean where the caliper is not touching the brake pads? I think I did, but also how did you got about bleeding them. With a vacuum speed pump or like someone else pushed on the brakes. Lastly how long did it take for you to bleed them?

@hondaresource

Жыл бұрын

@@drunkn3450 I did them with a block of wood in where the pads would go, with the caliper unbolted and holding it with the bleeder screw in the upright position. I got my wife to pump the pedal for me.

@drunkn3450

Жыл бұрын

@@hondaresource With both bolts, or just one. Like the bottom one un bolted to flip the caliper up? I am just try to make sure

Is it gonna be two passenger or two drivers side rear axle for crv diff?

@TurboDub1991

5 ай бұрын

Two Right Rear! Thankyou so much for the awesome content.

@hondaresource

5 ай бұрын

Yessir. 2 passenger

Hello. Does it matter if the trailing arms are from a sedan or coupe?

@hondaresource

Жыл бұрын

No, they are the same

Any updates on the PLM crv awd header?

@hondaresource

Жыл бұрын

I'm calling my rep again tomorrow to get an update.

When can i get some of the disk brackets

@hondaresource

Жыл бұрын

I forgot to post them on my website. I will tomorrow

What rear rotors did you use?

@hondaresource

Жыл бұрын

Integra

i've been getting and reading mixed results about PLM products. I had a Cart full on Plm site with things ready to be checked out as i'm doing also a k series budget build green coupe like that awd for some track days and maybe street here and there., but not sure what product is crap. Didn't want to pay for something that the quality is crap. thanks for the review of their products! you should keep it up! and PLm should sponsor you to test their products like this as a show case! on your coupe!

@hondaresource

Жыл бұрын

I'm a wholesaler for PLM, email me phillip@thehondaresource.com I can help you out on pricing and give you my honest opinion on the products that I've used

That will hold perfectly Mr Babb. Mrs. Babb hello!!!!. Burgers will be fuego 🔥. Season them well you are gucci 👌.

Man can you send me the link for all the parts I'm having trouble finding it please 🙏

@hondaresource

8 ай бұрын

Most all the info is in the description

@jordanaustin2932

6 ай бұрын

​@hondaresource do you ship to the UK? Have tried on your website but no luck

Do you think it would work on the EF arms 🤔

@hondaresource

Жыл бұрын

Yes 100%

@efjay5042

Жыл бұрын

@@hondaresource kool deal thanks bro

How many amps were you hitting it with?

@hondaresource

10 ай бұрын

I don't know. My welder doesn't show

What trailing arms are those? CR-V?

@hondaresource

Жыл бұрын

No, they are the original Civic, modified with the listed parts.

Can I use the pwr Spherical Bearing Bushing Kit on my lifted CRV? Would I benefit from it compared to using an OE style replacement ?

@hondaresource

Жыл бұрын

No, that was the original plan with these, the crv arm is shaped differently

I needs a steeeker

@hondaresource

Жыл бұрын

I got you fam

hi pal. what diff you use?

@hondaresource

Жыл бұрын

CR-V for this one but wagon will work too

@rudzons2413

Жыл бұрын

@@hondaresource can I use diff from HRV 2000 D16w1? and why this conversion not support D16 engine with awd gearbox? I checked your home page. it only supports B,H.K.J F series engine.? thank you for your reply.

so i guess im doing an AWD set up now lolol

@hondaresource

Жыл бұрын

Do et

@TommyG_0311

Жыл бұрын

@@hondaresource *I'm never going to financially recover from this*

sure keeping that rust out lol they lucky

@hondaresource

9 ай бұрын

Yeah, we don't have rust in Alabama

When's dinner?