Gotta say my favorite memory of the hatch was when Charlie was in the back filming while you were doing street pulls, and after beating an STI he opened the trunk and waved at the car. Too funny. Excited to see this thing really move now , not like it wasn’t already really moving..

@mikaeelmohammed4215

2 жыл бұрын

Link for this vid plz .... would love to see that 🤣🤣

@christophercourter4757

2 жыл бұрын

@@mikaeelmohammed4215 kzread.info/dash/bejne/foWMmtefmd21ldI.html @3:50!

@danielclark7397

2 жыл бұрын

Good memories bro!

@tdwz1652

2 жыл бұрын

whatever happened to charlie?

@danielclark7397

2 жыл бұрын

@@tdwz1652 bunch of KZread drama. Long story short he got the boot. Tried starting his own channel which was a failure. The end.

Please put a rubber grommet or silicone around the return line on the fuel cell where it goes through the trunk skin, would suck major ass if vibrations caused the metal to rub through the line.

@marvinvisser5039

2 жыл бұрын

Haha my thoughts when I saw that fuel line

@gmula1987

2 жыл бұрын

First thing I thought as well but it is a steel braided line so even if they don't do it they probably should be fine anyway.

@damiendoisher7812

2 жыл бұрын

Hahaha just posted the same comment. Somethings never change on this channel lol.

@LUCKIPUP

2 жыл бұрын

even a cut in half boost line would work, ik people sometimes use boost lines like that as diy weatherstripping

@fanimej

2 жыл бұрын

@@gmula1987 alot of vibration on a 800 mile trip plus dragstrip hits on awd.. Cant hurt to be extra safe!

These awd videos are about to cost me a lot of money. Been kicking the idea around about this for some time now and between you and Trevor knocking these out in not time I think I’m sold on the idea. Love the content, guys! Keep up the awesome work 🤙🏻

@douggiedowdallki885

2 жыл бұрын

My homie has a Honda Pilot awd I’ve been toying with the thought of sticking it in my 99 civic

@wyattsmith7665

2 жыл бұрын

I got a b series and k right now been putting the b series in my 98 but fuck I’m almost at the point of tearing it out and doing AWD K LOL

@tig3rBite

2 жыл бұрын

Lol been kicking it around since year 2000. Much easier now, just gotta have money lol I mean you can still diy .

@3dwezzy740

2 жыл бұрын

how much sum like that cost

@joshm8661

2 жыл бұрын

@@3dwezzy740 oh probably around 3-4 grand if you're doing it yourself

I am working down in Tampa and so hyped up to see everyone Sunday. Its been years of watching yall and enjoying the trials of pushing to be better and faster. Good and bad you guys Keep it real. No stupid bs. Keep it up and best wishes.

Never been so excited about a civic! So interesting fair play guys, I've never checked as much if someone has uploaded as I have with you guys! Don't change absolute legends! Much love from Wales!

Hey man, love your videos! Crashed my crx about 7 months ago broke all my limbs and haven’t been able to get back to work, so just been watching videos from everyone. but hoping to get back into it and hopefully I can race with you guys one day! Love the nsx! Dude keep up the good work!

@anesthetized7053

2 жыл бұрын

damn dude that sucks but you will be back on the road soon. hope everything works it self out. i have broken countless bones and they always healed up perfect so im hoping you have the same luck! keep the positive vibes going and youll be good in no time. if your running low on suff to watch, i can recommend checking out "cars and cameras" channel. they have a lot of stuff in common with the PFI guys but usually work on go carts and mini bikes. same vibes of building fun stuff and hanging out with the boys

@clayton_4897

2 жыл бұрын

@@anesthetized7053 yeah forsure, I appreciate that! Unfortunately mine isn’t going to heal fully, my elbow came out of my arm and so now it has metal in it so I can’t fully bend it out or in, and my right leg I broke my femar and had a metal bar put in from my hip to knee so that swells up a lot left hand I shattered all my bones so it’s hard to do simple task with hands a lot of physical therapy but it’s still early in wrecking was 7 months so hopefully I can recover somewhat I got a lot of other little stuff like broken collar bone, broken chest piece, broken pinky toe etc all the little stuff has healed though I ended up losing feeling in my right hand tho on 3rd and pinky finger. I believe I have ulnar palsy from them fixing my elbow but haven’t been diagnosed with it yet! I let it have time to come back but gonna mention it next doctor appointment! And I appreciate the recommendations! I enjoy most stuff that fun and fast haha

@TheSkrillexRemix

2 жыл бұрын

Play forza if you wanna drive like a jackass

@user-ef8lg3xc4f

2 жыл бұрын

Damn man that sucks, how bad was the CRX crash? I guess no airbags due to the age of the car, but what about seatbelt/etc? Always scary hearing about accidents in old-school cars, glad you're recovering and working through it!

@clayton_4897

2 жыл бұрын

@@user-ef8lg3xc4f yeah, it had basic 89 seat belts nothing fancy, no air bags nothing really safety wise kinda just had to take the hit

if you have the time, a drive shaft loop(s) would be some added security before you go drag racing

@NehuennSant

2 жыл бұрын

I think they are even mandatory for Sick Week, Shane put some loops on his CRX the other day

Let Wyatt know that I would love to see if he has made any progress on his truck.

I hope all is well, Wyatt has seemed a little down lately, besides the cold. You guys are seriously kicking ass getting stuff done. Doing it properly and really putting out great content. Appreciate you guys, thank you.

Long time coming man. Gonna be badass. Run her in “Mexico” again for the one time 1320 style. We all miss the little red car hurting feelings!

@bearrett50kal17

2 жыл бұрын

When this thing is dialed he needs to do This vs That again against like a super car or rwd no prep muscle car

Man this is sweet, the hatch back with some attitude! AWD and upgraded from the get go. This Civic is going to Hurt some feelings. And the way you are about doing things lately, the Rowdessy is heading in the same direction. All well build, upgraded, well sorted, top notch components. Rolling legit son! Awesome! My younger brother has never been a car guy, even didn't own a car in years. Now since he got himself a FK2 Type R he is all Honda and into car stuff. Keep it going boys, 2022 just started and it's looking great already. Greetings from Holland

Honestly super excited to see you run this next to Shane’s CRX! You guys have a great week ahead of you!

Hell yea boiz!!! The guy Justin, who runs Hubcity Performance where you got some of your parts, had a BAADDD AWD hatch that was like 850-900 wheel. Undefeated on the street. He raffled it off for like 35 or 40k worth of tickets. I bought 2 and unfortunately I do not have a 900awhp hatch lol Can't wait to see this thing rippin

@fast97z24

2 жыл бұрын

These kits are absolutely amazing. Yall should be quite proud.

I have been waiting to see this video. Nice job Kyle and hope to see it do sick week with no problems

@cannabass5729

2 жыл бұрын

Wen is sic week

@thesquirrelchroniclesakare7808

2 жыл бұрын

@@cannabass5729 Next weekend

@SkatersOfTheNorth

2 жыл бұрын

It’s Kyle something will go wrong with his luck

@AAlvarez14520

2 жыл бұрын

Did he even refresh the motor or is it the same setup from years ago? I’d be worried about reliability. But then again. It is a Honda lol

It's so great to see the older cars up and running Wago and Now 4WD Hatch and it's going on Sick Week hope it's engine can handle it. All The best.

sorry if this is long, but seriously thank you guys, years ago you guys reignited my childhood love for cars and everything fast starting with the shopping go kart, and then i saw the integra build, and i havent slowed down since, thanks to your guys' inspiration, i now have my own project foxbody, and possibly another project soon being a CRX, and i now get to work at a honda dealership, im so happy with what i do now and you guys are a huge reason why i do what i do now, thank you for everything you guys do and im so excited to see the hatch with its new and improved drive-train!

This is amazing! Congrats! Two things I’d consider. #1 O2 sensor at the 12 o’clock position before the bend will work better at calculating fuel mixture. #2 even though the metal is thin, riv certs are dangerous, I would plate/weld the steel anyway with 1/8” and not riv cert, don’t wanna pogo stick the car….

@eriklarson9137

2 жыл бұрын

Yo! I checked all your tuning videos. He should for sure trust you.

@franksfishing8893

2 жыл бұрын

@@eriklarson9137 on me we got a master here

Time to fly! 🚀 Good to see the hatch getting the much deserved love.

its amazing seeing how far youve come. great inspiration.

I remember watching the video of you driving it from Colorado to Florida and made a insane pass and now with a awd set up can't wait for this keep up the good work and the awesome videos 🙏

Well this has been a long, long time coming! Have always preferred the sound of the Hatch. Great work Boiz.

@laska907

2 жыл бұрын

I’ll ask you since I know you have been watching for a while. Did you notice how short of breath Kyle sounds?

@802Garage

2 жыл бұрын

@@laska907 Hm honestly didn't take real notice. Just figured he was super active right before every time he was filming.

@edgarsoltero1989

2 жыл бұрын

@@laska907 I noticed that too. I thought because he was running around under the car and spinning the front wheels

Adding Wyatt was an excellent idea. The channel has gotten so much better since the move to Florida. It was great before but now your building solid rides. Congrats and keep the content coming. 🍻

@zen95209

2 жыл бұрын

Agree!

@TURBOTRISTO

2 жыл бұрын

Wyatt is really smart if you watch his channel also

@Junkpusher77

2 жыл бұрын

@@TURBOTRISTO I used to watch it. I didn’t know he still had one

@TURBOTRISTO

2 жыл бұрын

@@Junkpusher77 he still does he is building the truck on there

Unreal. Great work boys. It's crazy that just a few years ago, a rwd/awd civic swap was a HUGE undertaking. Tons of fab work, all one off parts, and the end result was unreliable for the most part. This looks completely OEM and to be able to do it with minimal fabrication and so quickly is brilliant to see! I feel like I'd get mega rich if I started making reproduction waggo diffs cuz they are getting HARD to find!

Keep up the great work brother, good luck on the road and much blessings for the hatch

This is great and it's great seeing you guys skills improve as you do each build. Ever car is just looking cleaner n cleaner great job guys

As entertaining as it was watching Kyle and Charlie build everything as cheap as possible its really awesome to see Kyle do everything right the first time and not cheap out on it the hatch really deserves it, so stoked to see what it'll do!

My favorite car out of the fleet is back an AWD! So stoked for you. Great job you guys. Wyatt killed it.

Been waiting so long for this, awesome to see all 4 turning together. This things going be great fun and it's so good to see the hatch revived 👍

That’s so sick!!! I remember when u first we’re working on this car in ur first shop at your house it’s came so far

🔥 she’s gonna be a monster, much love for you guys. Your videos make my day better.

@graysonspears

2 жыл бұрын

@lisa ann💕💖get off here you made me fall into temptation

i would love full build breakdown of this car ive never liked civics but this one has a special place in my heart remember watching u race people on the highway years ago

I really appreciate the videos about mechanical side I learned something new today thankyou

i hope u have a massive washer on the top of the mount for the hitch it will bend that thin mount metal fast

@thebreadedcrab4252

2 жыл бұрын

Yeah thats a pretty sketchy hitch setup

Wonder how this thing would do at Cleeter’s spectator drags? Any chance at running it in competition?

@24kNick

2 жыл бұрын

It would handle better if it were fwd I heard the AWD makes it feel like your driving a box

@Jcarney87

2 жыл бұрын

It’s not gonna do shit cause this guy runs stock axles on all his high power shit

@DinoG100

2 жыл бұрын

@@Jcarney87 Bro. The car has upgraded axles all around! Lmfao you clearly don't watch that many of Kyle's videos.

@mergru6371

2 жыл бұрын

@@Jcarney87 Lol you are the perfect example for people commenting before watching the video. Thank you for doing so, I will use this comment in my classes if you don't mind.

@MiGujack3

2 жыл бұрын

@@24kNick It's mostly FWD tho, launch is super important as the Talon demonstrated.

Crazy what you’ve been through kyle! Been subbed since 100k and have seen your journey through cars im mind blown!

So awesome! I wish it was easy as this to make a vw awd but definitely fun watching you do it to the hatch.

This is so badass I'm can't wait to see it rip🤘 I learned about your channel from the 7 second video, and started by binge watching your whole series on the MR2 from 2016 on. Fun fact: I didn't know the difference between b, d, or k back then. I grew to love the sound and power from smaller engines by dabbling in your other builds like the minivan. Only in the last month did I find the civic reaction video with Ned Flanders and damn dude it blew me away how hard this thing pulls!! I've sent that video to Honda skeptical friends and no one can deny how bad ass it is. Great video quality and very thorough on this build guys. Sick week is gunna be insane

Get a rubber grommet for that hole the return line is going through.

super excited for you guys

Awesome super happy for y’all hope everything goes great can’t wait for a awd boost launch

“Once we get the driveshaft in we’ll be ready for AWD” - Kyle 74 thousand times before installing the driveshaft to have AWD

@thetassieboys

2 жыл бұрын

He repeats himself so fucking much. The video would be 7mins shorter with better editing lol

@jw404

2 жыл бұрын

@@thetassieboys yep old videos I barely skipped but I skip so much only watch about 5 min

@Addison0526

2 жыл бұрын

@@thetassieboys I’d say 10 minutes. He babbles on about the same thing 3 or 4 times

Appreciate these types of videos. Been trying to map out an awd k swap for my 7th gen Celica. Now just gotta source parts and get to welding. 🔥🔥🔥

@johnkrstyen7351

2 жыл бұрын

Awd 7th gen celica sounds divine

You guys have been making amazing progress in these past couple videos and I’m loving it. Also loving the hatch videos

This has been a long time coming! I originally subbed for the hatch and charlies awd wago so its awesome to see this cars transcendence to a higher plane Of being!

I predict that the tow hitch is gonna rip straight out the back of that thing if there's too much weight in the trailer. Those mounting points just aint man enough. You need a hitch that slides inside the two chassis rails there and properly fixes to the car's structure instead of just hanging off it.

@mikeymasi

2 жыл бұрын

Yep that is sketch af.

@emil3672

2 жыл бұрын

So you say, but on a lot of jdm cars from this period, this is just the way the hitch mounts, Toyota still did it like this a few years ago on the 14' generation yaris and the likes, and some of these cars will tow a lot My own is allowed to tow about 1300kg with trailer brakes, but that is limited because of the engine, mine is 1.8, the 2.0 is allowed to tow even more

@nickmaclachlan5178

2 жыл бұрын

@@emil3672 I've fitted my fair share of tow hitches (or Tow Bars as we call them here in the UK) over the years, and I've never seen one that hangs off the bottom of the car on two bolts and then attaches to the towing point for seemingly the hell of it. When a trailer is towed behind this, those two main bolts, with the added leverage of the spacers, are just going to bend and tear that thin sheet metal right out of there, that is the totally incorrect hitch for that car and my prediction still stands. As Mr never lift states....... it's sketch af.......

@emil3672

2 жыл бұрын

@@nickmaclachlan5178 mine is mounted this way, a Toyota carina e - just with 4 bolts I believe, but it's just hanging from the bottom or the sides, nothing slides inside the frame, or around for that matter, and I just looked up a completely new assembly, and it's still the same - I think I found one version that connects on the bottom and sides But it can only have around 75kg sitting directly on top of the ball And on the earlier mentioned yaris, it definitely just goes underneath as I mounted a bunch of these at a Toyota dealership/workshop with all original parts - though it generally seemed like the car wasn't meant to have a hitch, as some of the wires had to be soldered under the dash after being pulled through the entire car Not saying it's not sketchy, just saying that it's not unusual, and that I have never seen one fail in person Edit: let's just hope that they either change it, or it holds

@nickmaclachlan5178

2 жыл бұрын

@@emil3672 Yup and that's 100% more bolts, two each side would hold well over twice as much rotational force from the weight and drag of the trailer than one bolt each side. Just cos Kyle stood on it, doesn't make it strong, as the main force it has applied to it isn't downwards, as a small well loaded/balanced trailer shouldn't have that much tongue weight. The force applied to the hitch is in a rearwards direction parallel to the ground.

You really need something to protect the fuel line at the back. One small rear-ender and thats 10 gallons on the ground.

Brotha dont forget to add your driveshaft loops. Would suck to do all of this and fail tech inspection. Love the content as always. Keep up the great work

Hell yea bro I been watching your videos wen you only had the ek and now she awd you the man bro keep up the good work man love your videos

I'm so excited to show this to my 7 month old tomorrow. We've been waiting for this. Me probably longer but my son needs to see this!!! Haha

@TetraHydroCannabinolTHC

2 жыл бұрын

Another kid having a kid

@alantalley1268

2 жыл бұрын

Haha wow yeah I'm sure he'll know what's goin on! That's totally relevant

@chrisgabriel691

2 жыл бұрын

@@alantalley1268 he knows more than you

@alantalley1268

2 жыл бұрын

@@chrisgabriel691 good one haha. Totally hurt my feelings 😂

@chrisgabriel691

2 жыл бұрын

@@alantalley1268 I hope it did

Why would you use a used throwout bearing on a $10,000 trans😆

@AAlvarez14520

2 жыл бұрын

Because boostedboiz 🤣🤣 thats why

@ezekiel676

2 жыл бұрын

Are you new here?

Damn Kyle, I'm so pumped. You and Wyat killed it.! Much love from IT🇮🇹

My favorite video was the off roading in the geo, and most definitely after that it was snow drifting in wago. The first snow drifting in wago. Also I remember meeting you at cleetus and cars a few years ago in Houston. You hooked up your sub in wago for me so I could hear it. Was fricking lit dude 🤘🏻 love the vids! Been here since 60k or less. Keep up the good shit.

How are Tom & Milo doing with that viscous coupler?

I am not enjoying that tank location, looks very tight between that back panel and bar. Wouldn't take much of a knock to buckle/damage/split the tank.

Love your videos man, been a subscriber since 2016💪🏾💯 love seeing the hatch content

Recent years have been so successful for y’all! It’s awesome to see

for the love of god please put a rubber grommet around the hole where that fuel return line goes through the body before you guys rub through that nylon line and soak the track!

Hopefully they add some small driveshaft loops just to be safe. Don’t wanna pogo stick!

This is awesome to see the hatch working , keep grinding guys 🤙🏼

Your hatch was the first reason I now own my EJ8 dude, congratulations on the swap!!! You have come so so far G. Keep it up man!

I really hope Roman comes to stick week you should give him his drive shaft back he would be so happy

I'm always amazed how much power the CR-V differentials can handle...

sweet channel. you guys seem like genuinely blessed people. keep it up!

Congratulations guy Awesome job!! 🇨🇦

Hell yeah!!!!

When it comes to the world of investing,most people don't know where to start. Fortunately, great investors of the past and present can provide us with guidance

@bernyjackson9245

2 жыл бұрын

Interesting. I have a lump sum doing absolutely nothing at all in my bank account, I wanna get something started with it, any reasonable ideal?

@frederickscott2762

2 жыл бұрын

Investing in stocks is a good idea, but good trading system will put you through many days of success.

@randyo.6426

2 жыл бұрын

I'm Trading with Expert Andrew Jordan, a regulated broker in US. Met him sometimes early last year at a startup funding event. He has some interesting things to say about the state of algorithm trading today. Very obviously I'm seeing the results.

@kamilabibi311

2 жыл бұрын

Wow I know Mr Andrew Jordan. I met him at a conference in The Dome at American's Center Life 2016 where he introduced us to his business strategy, he helped me cover my Loans.

@archivealexander1952

2 жыл бұрын

Amazing!!!... I also started trading with Andrew Jordan, He's the best at what he does with an initial investment of $2500 Canadian I made up to $8450 profit in just a week of trading with him, his strategies are mind blowing.

Looking forward to some great numbers in that 1/4. As always boiz some great content. Regards from the UK

This is the car that made me drop out of college to pursue my dreams in the mechanic field... so glad it's running again! Love the shit yall do.

This is my dream goal to get my hatch awd! Been watching this build for long while its great to see it getting love! cant wait to see what it does on track! Great job Kyle this thing is a monster!

@amytaylor9108

2 жыл бұрын

I know right lol Hope you are having a blessed day there?

Wish u guys luck that diff set up look skeetchyy but long as everything clears and holds ull be golden can wait to the hatch make a pass

Nice to see you got them floor jacks for the drive shaft....made it look hella easier

yall boiz do some excellent work. good work love the vids G

Noise is the flywheel clearinging the bell housing. 👍 it will be fine after a few starts. Mine did the same

Awesome job on the AWD. Remember "what can go wrong will go wrong" so give it a once over front to back, hoses, lines, cables, connections, grommets for cables etc, make sure nothing looks sketchy, will disconnect or rub through on body work/chassis when you are on the freeway. Could be good video content if it fails but a pain in the ass when the car is stuck on the freeway and it's raining and you just want to get to the hotel and chill.

No matter how many cars you get Kyle, The Hatch will always be my number 1 favorite car. Its the car that no joke Started it ALL! Im a Chevy guy. not a Honda guy. But the hatch is my top number 1. An seeing it back up and running and ready to rip gets me so hype. Good job you guys!!

That's awesome!! Glad she is coming together!!

Love to see the hatch running again can’t wait to see you do sick week 🔥👍

I’m impressed kyle! I’ve always loved you’re videos but sometimes get frustrated how you will just throw somthing together or rip it when it’s not ready. But what y’all have done with the hatch is awesome. Great job!!!

@bababa1231000

2 жыл бұрын

That’s how we roll big dog.

sounds like you murdered the prelude for its parts. dude, that was a classic testament to the preludes success. Im still trying to get another one. i want ek also, but still.

You guys have been putting in the work !!

Im here putting pads and rotors in mine while watching this always gives me motivation to work on the eg

Absolutely love your videos, just need to rewatch more when you are editing and chop out where you repeat yourself. You talked about making this thing awd with the tailshaft like 20 times. Its similar through most of your videos.

Im so stoked for this new awd civic! This is definitely the How To on refreshing the og whip! I cant wait to see how she rips

@independentsoldier4274

2 жыл бұрын

@lisa ann💕💖 🤢🤮💩

Man, you guy's are doing great things! I love it.

@mitchellholroyd2837

2 жыл бұрын

@lisa ann💕💖 why?

It’s crazy seeing this from start to finish. Been here since it started.

Let's go boys! Love seeing the hatch getting the love it deserves!

So stoked to see the hatch rip! Missed her for sure

I was watching on my home theatre set up and when the car started up. HOLY SH!T that was loud hahaha glad to see the hatch alive bois.

Will admit I had a mini heart attack when you jumped on the hitch, thought the car was going to fall off the lift. Lol thanks for that bud.

Great job Kyle and Wyatt !! New drinking game is drink everytime Kyle says my awd civic or turning all 4 wheels

Opposite rotation front and rear wheel burnouts would be insane... WOW that's another level would like to see that done.

Congratulations can't wait to see it on the open road 👌

kyle is out of breath is he so excited. I've never seen him this pumped up before and I love it!

If you're running a twin disc clutch you'll usually encounter that noise . Nothing to worry about since its common on most twin disc plate setups and go away after a few minutes ...just as a FYI. Looking forward for content of sick week 👏

SICK BOIZ! Very awesome. Keep up the great work! Thanks for sharing!

@amytaylor9108

2 жыл бұрын

I know right lol Hope you are having a blessed day there?

Nice to see the hatch back up should take it out for a ride with the wagon see them both out together 💪🔥

I see weight transfer being very important now with awd id look into some double adjustable coilovers to dial it in

wow, awesome. love the companies making it possible the right way. the entire set up looks amazing.

So sick bro the hatch is looking fresh can't wait to see how it runs hope you guys kill it 🙌 👏 💪

Mad props man, you got this! Anything for the exhaust so you don't nearly die like the last time? Can't wait for Sick Week!

@theboomfish

2 жыл бұрын

This comment needs more likes, maybe a quick straight down pipe would be easy to do in the time frame. I think the last time was made worse by it being cold so they had the windows closed or something. I don't recall exactly!