AUXBEAM Switch Panel - How To Wire Video: kzread.info/dash/bejne/aKONttScdabIm8o.html&ab_channel=AZOverland Video on What Fuse to Tap Into: kzread.info/dash/bejne/o62DzdSQZLOboc4.html&ab_channel=AZOverland *Auxbeam 8 Gang Switch Panel Kit amzn.to/3FcJJ5I *Power Fuse Block Shelf Bracket (silver) amzn.to/3i4ij9k

Looks great! Very clean electrical work. I put a Switch Pro in a few years ago and did not correctly anticipate how many buttons I would end up needing....So, that's one more item on the to-do list ha ha!

Looked for so many videos and this was the best video and the best descriptive for this specific install! Thank you!

@AZOverland2017

Жыл бұрын

Thanks for watching. I appreciate the feedback

Best install on yt for this. Great job! I needed this 🤛🏼

@AZOverland2017

Жыл бұрын

Thank you Ramon, so glad it helped.

Love it! Good job showcasing the under hood stuff -- appreciated.

@AZOverland2017

Жыл бұрын

Thank you

Thanks for making this video I am about to install the same setup and this makes it a a lot easier after seeing this

@AZOverland2017

5 ай бұрын

Great, good luck. I have a few other videos of the actual install

Thank you for making this video!!! Have a Merry Christmas and stay safe!

@AZOverland2017

8 ай бұрын

Absolutely! Merry Christmas to you as well.

This is an excellent way to start the New Year! Thanks!

@AZOverland2017

Жыл бұрын

Happy New Year! Yes it is

Installed mine yesterday. It went pretty well, but I enlisted the help of my son, he wired it up. Very, very pleased with the results.

@AZOverland2017

Жыл бұрын

Nice job! Was it installed on a 4Runner or different vehicle?

@Bluto4r

Жыл бұрын

@@AZOverland2017 it was on my 2017 4runner. At present, it has a light bar and pod lights on the switch panel,. The panel opens up possibility of easy additions to my rig.

@AZOverland2017

Жыл бұрын

@@Bluto4r 👍 I have the same and just hooked up Rock Lights also. Vid coming out soon for that one. it was interesting figuring out how to hook it up as they switch between amber and white outputs

@phillie2004

Жыл бұрын

What fuse location did you use for the fuse adapter? I’m electrical savvy and can’t figure out which fuse to tap into per the instructions.😪

@AZOverland2017

Жыл бұрын

@@phillie2004 For my 2107, it was the INJ fuse. if you email me, I will send pictures TheTrilogyGroupAZ@gmail.com

Great video! Install looks clean. In reference to the circuit breaker location, it is considered “safest” to mount your breaker as close to the power source as possible. If you were concerned and if you wanted to leave the breaker there you could add in something like a Marine Rated Battery Fuse (MRBF) on the battery terminal itself to give you a second line of defense at the “best” location possible. Lots of people leave them like you have it though, but in case you were concerned there are options for leaving the breaker in that location 😊

@AZOverland2017

Жыл бұрын

Thank you for your advice. I'm not overly concerned at this point as I only have the ditch lights and lightbar connected with minimal draw. I will definitely look into that MRBF as I start to add more accessories though. I wasn't familiar with this until you brought it to my attention. I love learning new things so I thank you for bringing it to my attention.

@gavincalaway6277

Жыл бұрын

@@AZOverland2017 you’re welcome and for sure, happy to share/help! One thing to note: the reason for keeping protection close to the battery actually has nothing to do with the load on the system but rather a wire coming loose or frayed or a short between the battery and the fuse/breaker. If the termination rattles loose and hits metal in the engine bay, that would be bad news, placing close to battery makes that essentially impossible. I am certainly not saying it is “necessary” but it is considered “best practice”.

Such a clean install. Brilliant!

@AZOverland2017

Жыл бұрын

Thank you, I appreciate you watching

Nice, I went a little less expensive and basic, with the RLB Pro8 Switch Panel. I like that it has a built-in in grounding block and waterproof plugs!

@AZOverland2017

11 ай бұрын

It looks pretty nice. Isn't that like $400?

@martynevans3315

11 ай бұрын

@@AZOverland2017 Hmm, the price has gone up since I bought mine!

Looks great, excellent detail and explanation

@AZOverland2017

6 ай бұрын

I appreciate it!

Perfect, the last 10 seconds was my question. I have the wiring harness to two sets of light which includes relays and on off switch. So I can basically run a +/- wire to the fuse box and we’re good to go. Any future lights I don’t need to buy a harness? Plus my fuse box is different than yours, it has the two clear flaps to hook wires

Very good and clean set up 👍👍👍, thas the set up I m gonna use for my Tacoma.

@AZOverland2017

Жыл бұрын

I appreciate it. Good luck on the install

Keep the good vids coming!

@AZOverland2017

Жыл бұрын

Thanks for your support. Many more to come!

Great video 🔥

@AZOverland2017

5 ай бұрын

Thank you!

awesome Video !! Good detail..

@AZOverland2017

Жыл бұрын

I appreciate it, thanks!

Good stuff!

@AZOverland2017

Жыл бұрын

I appreciate you watching

Thanks…great video. Question…how to wire up ditch lighst with dual lights that have 3-wires (amber, white, ground)? Use 2 switches…and pigtail the ground from one to the other?

@AZOverland2017

Жыл бұрын

Pretty much, but you don't have to pigtail the the ground, just run it with 1 power wire to a fuse and run the other power wire to a separate fuse without the ground. I did a video on how I did it (see below). It is towards the end of that video: kzread.info/dash/bejne/m6OZ0tuJmd20c7w.html

Great video! When connecting the control panel to the battery, did you connect the red wire first then the black wire/ground? Thanks

@AZOverland2017

4 ай бұрын

Thanks. I connect the positive first. But, the circuit breaker is still flipped so I don't get power to the Control Box until I actually flip that breaker On

Awesome vid

@AZOverland2017

Жыл бұрын

Thank you 🙏

Very cool! 👌🏼

@AZOverland2017

10 ай бұрын

Thanks!

What fuse did you end up running your add a fuse to do that the panel only turns on when the rigs on/lights on? Thank you!

@AZOverland2017

5 ай бұрын

I actually did a video on this since I've been asked so many times (see link below). On my particular 4Runner it was the INJ. The video I did below will explain how I got there and what alternatives you may have kzread.info/dash/bejne/o62DzdSQZLOboc4.htmlsi=7JhlA5tpOhIg2RxR

Great video! Subscribed 🤙🏽 I got a similar kit from rough country and the accessory wire came with white and red and didn’t come with fuse tap.

@AZOverland2017

7 ай бұрын

Thanks! Interesting, did you have to get one to make it work?

@ATopDesignWoodworking

7 ай бұрын

I got the fuse tap but in the instructions is says white to acc and red to positive, I’m assuming battery?

nice video man. i just installed the Auxbeam 8 Gang in my Tacoma. how do you bypass Auxbeam V-Max series wire to connect directly to 8Gang switch with 3 light modes? i am not really good with wiring but can follow simple instructions.

@AZOverland2017

19 күн бұрын

Check out some of my other videos with ditch lights installs on both the the Tacoma and 4Runner and the Rock light install video and it might help. I don't know what wires are in that specific harness, but you will be cutting out the supplied switch and relay and wire directly into the Control Box. You will probably be using 2 circuits

Does the way you have control panel situated truly matter in terms of running the positive cable to the circuit breaker? Reason I am asking is because I was wondering if it is turned the other way were the positive post is closer to the breaker where there won’t be a need to have a 2nd longer positive cable the same length as what came with the kit. Getting ready to the install myself and your video has been very helpful.

@AZOverland2017

Жыл бұрын

You can mount the Control Box the other way as long as you are connecting the wires to the correct locations.

Great video! What fuse did you use in your OEM fusebox? Do you have it wired to come on with your lights or it is on all of the time?

@AZOverland2017

2 ай бұрын

Thanks. I tapped into the INJ fuse. I did a video not to long after this one that explains everything about how I found that fuse and why. It supplies power to the Switch Panel when the key is in the ON position. At that point I can operate my accessories that are wired in to the Control Box by pressing the buttons on the Switch Panel

Question: Can you use any circuit AND fuse it at whatever fuse rating the light is rated at? Meaning…take out the 30 amp fuse and put in a 5 amp fuse for a 5 amp rated light. Is the fused circuit (30amp) only for a 30 amp accessory or can I place a 5 amp fuse where the 30 was for a 5 amp accessory??? I know I cannot go over 60 amps total for accessories connected. Just want to know if I can interchange fuses with circuits…8 gang panel for 8 accessories each fused at 5 amps essentially.

@AZOverland2017

10 ай бұрын

My understanding is that you can do that. I've seen where Auxbeam has confirmed this, however to be 100% certain, I would reach out to them directly. I know these switch panels get updated and it would be wise to see if this still holds true with your model.

What acc fuse did you select inside your fuse box for the Add a circuit?

@AZOverland2017

Жыл бұрын

I can't confirm 100%, but I believe it was the fuel pump. I used a test light. I clipped the alligator clip to ground and tested every fuse with key Off, then turned key to ACC. I do remember I had to use a different type fuse (same amp) to fit in the pin connector

Can u use this on a motorcycle for everything including starting and cutting of engine

@AZOverland2017

5 ай бұрын

If it is a 12v system you can use it. As far as starting, this particular one won't work because it only has a monetary switch. You would need one with a continuous for starting or horn, etc. Also, it would depend on the amp draw. You have a 30 p max draw with this Panel.

What did u use for the ground thats supposed to run to negative terminal on he battery?

@AZOverland2017

Жыл бұрын

I ran the ground to a factory ground location; the inner fender

Does anyone open inside the switches box and the control box of this kit? This kits is great but I wanna use my OEM switches for this kits

@AZOverland2017

Ай бұрын

Not that I'm aware of

Clean install!

@AZOverland2017

Жыл бұрын

Thank you!

@enableroot

Ай бұрын

@@AZOverland2017beautiful work! The green backlight for my auxbeam panel is always lit, even when my vehicle is off. Can you direct me as to what I need to change in the wiring so that the panel is only illuminated when the ignition is in the on position?

@AZOverland2017

Ай бұрын

@@enableroot Thanks! Sounds like you've tapped into the wrong fuse. I did a video on this as well. See below and let me know if you have any additional questions kzread.info/dash/bejne/o62DzdSQZLOboc4.htmlsi=8nWVZoUu134Rn7Ox

I’m gonna be installing one on my tundra. What’s the best fuse to tap into ? Let me know please, I would appreciate it. Great video.

@AZOverland2017

10 ай бұрын

I just did a video on this. Here ya go kzread.info/dash/bejne/o62DzdSQZLOboc4.htmlsi=Yc_92PoA3o3Ny8Zh

Hi so it's been a year now since you posted this video. I'm interested in punching one however there are many reviews out there that are negative as pertains to malfunctions and warrenty issues, so since your install how has this product held up to the hype?

@AZOverland2017

6 ай бұрын

I'm seeing this message now, but didn't I answer this from another one of my videos?

I enjoy watching your vids. Im thinking about putting a switch panel in my 4runner. Currently, i have my light bar powered by a switch that is in the same spot as your panel. I hit my switch with my knee as i'm getting in. Do you have that problem with yours?

@AZOverland2017

Жыл бұрын

Thank you. No, I haven't had any issues bumping the Switches. Are you tall? I'm only 5'6" so maybe my height has an advantage here😁 Seriously though, the switch panel is pretty low profile

@Bluto4r

Жыл бұрын

@@AZOverland2017 yep, I'm 6'-2 tall

That's all cool but I can't think of 8 devices I'd want to control AND power from one location. A few lights, what else? Have more equipment in the back of the truck of course, but doesn't make sense to control say water pump or fridge from the drivers seat, and they also needs to be powered from a different (aux) battery. How many switches did you end up using in your setup?

@AZOverland2017

Ай бұрын

I've used 4, but have more additions. Ditch lights, lower light bar, and 2 color rock lights which take up 2 buttons ( 1 to control white and 1 for amber). I'm adding a roof rack light bar with potentially 2 modes as well, and rear tack lights. They can be used to control a horn ( if you get one with a monetary function). They also have them in a 4 or 6 switch configuration

Have you had any issues with your ditch lights asking because you put both pods in one switch, I wanna do the same thing. Great video by the way 🔥🔥

@AZOverland2017

Жыл бұрын

I have not. It is not an issue to do this as long as the lights you are using are out on the correct amperage fuse

Excellent install video. Top notch! What gauge wire did you use running from the breaker to the + battery terminal? Thanks!

@AZOverland2017

5 ай бұрын

Thank you. It was either 6 or 8, I can't remember.

@Treetopflyer777

5 ай бұрын

@@AZOverland2017 thx!

I have switch panel already installed on my tundra ! So i ordered some lighting to install Now that the panel comes with fuses and relays What i do with the relays and red wire with the loop on the end ?? Thanks

@AZOverland2017

4 ай бұрын

Depending on what kind of lights will determine exactly how you wire it. However, I did a few video explaining how to do this if you want to check through my Video Library. See the link down below for 1 of the videos I did starting at 4:36 when I wire ditch lights to a switch panel: kzread.info/dash/bejne/h2qOrrGYobSugLw.htmlsi=E1QLn3ge2wmnvpq-

@ramirozamora8117

4 ай бұрын

Thanks 👍​@@AZOverland2017

Was thinking of getting one of these, but my ditch lights are also DRL.current switch is "ditch lights/off/DRL". This switch panel only has on/off for the button? Would hate to lose my DRL, BUT I need more switches and need to clean up engine bay from all the wires. Thxs for video.

@AZOverland2017

Жыл бұрын

Yes, On/Off only. Can you wire them separately to 2 separate circuits in the Control Box so they are operated by 2 different switches?

@robh3563

Жыл бұрын

@AZ Overland thxs, been enjoying your other videos. Greetings from Gold Canyon, Az

@AZOverland2017

Жыл бұрын

@@robh3563 Thank you fellow Arizonan!

What ferrule size are you using? I looked at the kit but did not purchase it yet. I also have 2 lights i will be using as rear lights and looked at piggy back blade connectors for them to run a single wire from front to rear.

@AZOverland2017

8 ай бұрын

I will check and let you know. Thanks

@AZOverland2017

8 ай бұрын

The size I used the video (gray) were 12AWG

I currently have the RC 54 Inch lightbar, it has built in relays, can I still use them in conjunction with the Auxbeam relays? It would draw considerable less amperage.

@AZOverland2017

Жыл бұрын

That's a good question. I believe you can but I would speak with the Auxbeam people directly and have the specs on the lightbar ready to provide. Wish I could be more help here.

@MrSpike0358

Жыл бұрын

@AZ Overland Yeah, tried to contact them with no luck. The switch panel itself is basically just a toggle switch. I just didn't want to overload 1 input because they only have a 30 amp fuse, but my relays cut down the amperage before it even gets to the Auxbeam. I believe I can just leave them in. Unless all of the relays are internally connected, if so I can do away with the rc relays.

Very neat and clean. I need to do this to my tacoma. Where did you get the bracket from.

@AZOverland2017

Жыл бұрын

Thank you. If you have a 3rd Gen Tacoma, below is a link to the bracket. I will be doing an install soon on our Tacoma with this bracket and a similar Switch Panel amzn.to/3l4IT3R

@makamakalena3464

Жыл бұрын

Can't wait to see the install on the 3rd gen tacoma. I have the Auxbeam 8 gang switch panel.

@AZOverland2017

Жыл бұрын

@@makamakalena3464 within the next month...

No nned for relays for each light set?

@AZOverland2017

Жыл бұрын

No

What is the wattage of the auxebeam tap a fuse?

@AZOverland2017

Жыл бұрын

I believe the add a fuse has a 5 amp fuse preinstalled

I'm having trouble with the Output Connections. Seems like when I tighten the + / - wires in their holes and screw down the holder, I loose power to the light. Any suggestions on how to properly secure wires into the Output Connections? THANKS

@AZOverland2017

10 ай бұрын

I'm so sorry, for some reason I did not see this question. If you still need help let me know. I think I know what the problem is.

@XtrmTJ97

10 ай бұрын

I found the solution. TY for responding.

where fuse did you plug it into ive ve tried my INJ fuse but it would make my car sputter

@AZOverland2017

4 күн бұрын

I did a video on this as well, but I am tapped into the INJ circuit as well. I have not had any issues with mine. What year is yours? You can simply add the proper gauge wire to the fuse tap and run it through the firewall and tap into a fuse in the panel under the dash to remedy this

In theory if i need all 8 switches to only be 5 or 10 amps, is there any problems there swapping out the 20 and 30 amp fuses?

@AZOverland2017

9 ай бұрын

My understanding, from past Auxbeam information they put out, was yes, this will work just fine. I would recommend that you reach out to them and confirm that, especially because some of these companies change these units with updates as the years pass and it may depend on what unit you have.

@jaxturner7288

7 ай бұрын

Dang why do all these guys fear changing a fuse so much? Everyone even mentions using a smaller fuse than what it comes with….. so, are you all afraid of pulling a fuse out? or sticking one in? It’s not difficult and they don’t bite. 🤷 Really If you are working on your own car in any capacity, changing a fuse should not be that big of a deal. And if you don’t understand standard electrical devices like fuses well enough to know that using a fuse with a lower amp rating would be fine and it would not create or allow for a dangerous situation, then you should probably stick to just changing oil until you at least understand the basics of how fused circuits function. 👊

Anyone tried the shelf/bracket in a 2022 or 2023 4runner ? Im interested in doing basically this exact setup

@AZOverland2017

Жыл бұрын

This is from the company and in regards to the 2021 which may hold true for the 2022 and 2023: "Toyota added a new relay box in the same location where this bracket goes. Other customers have removed the bracket from the new relay and tucked it beneath the Overland Equipped bracket. Just be aware some modifications are necessary, it’s not a simple drop in."

Hi, what fuse did you use for the acc wire. I'm installing into an FJ Cruiser too

@AZOverland2017

3 ай бұрын

I tapped the the INJ fuse, but this was installed on a 2017 4Runner. Check this video I did on fuse tapping for a Switch Panel, it might be useful to you: kzread.info/dash/bejne/o62DzdSQZLOboc4.htmlsi=UY587j6zsXXoya5l

@vin6930

3 ай бұрын

@@AZOverland2017 Champion! Thanks so much mate, I'll check it out. I ended up tapping off acc in the cab, had to run the controller cable anyway.

@AZOverland2017

3 ай бұрын

@@vin6930 Definitely the best way to do it. Good job

Since then have you run into any problems? Hows the parasitic drain?

@AZOverland2017

3 ай бұрын

No issues. Drain is minimal. I run a Scangauge and monitor my voltage and everything is within safe parameters

Finally got it in the 4Runner huh? Looks a lot neater

@AZOverland2017

Жыл бұрын

Yup. I'm happy to have gotten rid of those relays and extra length of wiring.

Howdy from AZ (Queen creek) as well. I just ordered an Auxbeam to clean up the wiring on a 19 off-road premium I just bought. There are wires everywhere and it’s driving me nuts. I got several quotes so I’m hoping I can tackle it to avoid having to drop another $1k to have a shop do it. Couple of questions for you. 1. How’s the Velcro holding in AZ? I’m always hesitant with our heat that the Velcro will melt and not hold the switch. 2. Have you had any other issues or problems since install? 3. Do you do installs for local fellow 4runner owners? I’d love some professional assistance and I’m willing to pay!

@AZOverland2017

6 ай бұрын

Hello! The Auxbeam should certainly help clean everything up. Did you get the bracket for the control box that mounts to the inner fender as well? 1. The original Velcro I used actually did fail in the summer. I was using Velcro that I had left over from another project and was not ideal for this. I ended up ordering the Velcro below and haven't had a problem since. amzn.to/3Ssy3T9 2. No issues to report. 3. I have done work for some locals. I am probably an hour and 15 minute drive from you in Queen Creek; I'm in Peoria. I would be open to doing it if you really wanted to drive up here. I would need a 1/2 day to get everything right. I wouldn't be available until the 2nd week in Feb though. You can email if you want to discuss further me at Brothersadventuresllc@gmail.com

@jakeaubrigreene1745

6 ай бұрын

I didn’t get any sort of bracket as I wasn’t sure what came with the Auxbeam itself. I was going to wait to buy a bracket until I saw if I indeed needed it. Is one needed? Also I may reach out if I can’t get it figured out. I’m hoping since everything is already ran it should be just a matter of reorganizing and eliminating wires / relays. I need to re run the switch for my rock lights, ditch lights and light bar.

@AZOverland2017

6 ай бұрын

@@jakeaubrigreene1745 I should have put a link to the bracket on the video description. It is not 100% necessary, but certainly nice to have. You can Velcro or screw the control box and circuit breaker to the fuse box cover. I'm not a fan of doing that, but you can do it that way. Watch the other videos I did on all those light installs and it should answer most questions. You can email me anytime with questions if you do it yourself. I have helped a number of people that way as well

Where did you connect the Acc wire on the fuse box?

@AZOverland2017

Жыл бұрын

Email me and I will send you pictures of where I tapped into. TheTrilogyGroupAZ@gmail.com

@nflores24

Жыл бұрын

@@AZOverland2017 Hi, I would like to know the same thing. Where did you tap yours into?

@AZOverland2017

Жыл бұрын

@@nflores24 Email me, I will send pics of the location TheTrilogyGroupAZ@gmail.com

Hey man quick question do you know what fuse you tap into google is saying a lot of answers hope you can help me Newbie here 🤙🙏

@AZOverland2017

Жыл бұрын

For my 2107, it was the INJ fuse. if you email me, I will send pictures

@steevenpineda2785

Жыл бұрын

I tried emailing you but i think i got the wrong email

@steevenpineda2785

Жыл бұрын

I found the IGN fuse 10 inside the cab did you use the one Auxbeam 5fuse or did you plug 2 fuse? 5 and 10

@AZOverland2017

Жыл бұрын

@@steevenpineda2785 2 fuses. When you take the IGN fuse out, put it in the empty slot from the add a fuse that came with the kit.

@AZOverland2017

Жыл бұрын

@@steevenpineda2785 Try BrothersAdventuresLLC@gmail.com

How long is that black power cable?

@AZOverland2017

Жыл бұрын

I don't remember exactly, 2 or 3 ft

@johnesgy8382

Жыл бұрын

@@AZOverland2017 how about the gauge size?

@AZOverland2017

Жыл бұрын

@@johnesgy8382 It's either 4 or 6

Question

@AZOverland2017

2 ай бұрын

What's up?

Why not show what fuse you tapped into?

@AZOverland2017

Жыл бұрын

Honestly, I took for granted that it would be an easier part of the install, but admittedly, I was wrong. I've had a ton of emails asking me about this. Good news, is I always respond to them and with pictures. The bad news is, many vehicles are different so it won't apply to all of them. Oh, I tapped into the INJ fuse on my 2017 4Runner SR5. And, I will do a video on how to find the correct fuse no matter the vehicle.

THANK YOU for answering my other questions and pointing me here! Hugely helpful. I want to try this on my Subaru. Question: how did you pair the hots and grounds on the 2 5 A terminals? Is that heat shrink tubing? What ditch lights you using and their current draw for the pair?

@geoffreydlin8043

Жыл бұрын

See 6:12

@AZOverland2017

Жыл бұрын

In the video you'll see that I use ferrule terminals to pair hot and grounds. I'll try to tell you in a separate response at what time in the video. I am using Lasfit Ditch lights. The 36w HP series I'll try to link that as well. They each draw 2.7 amps, so 5.4 total draw. I am going to switch up to a 10 Amp circuit even though the 5 is working fine for now

@AZOverland2017

Жыл бұрын

See 3:27 for the ferrule terminal info

@AZOverland2017

Жыл бұрын

Lasfit Ditch lights I'm using kzread.info/dash/bejne/m5-Vz6t-iMufoag.html

@geoffreydlin8043

Жыл бұрын

You are awesome. Great teacher! Thank you!

👍

@AZOverland2017

Жыл бұрын

🙏

Is your switch panel constantly on regardless if the car is or not?

@AZOverland2017

Жыл бұрын

No, it's not. It comes on when the key is in the ACC position or when it is running.

@sgthawks3010

Жыл бұрын

@@AZOverland2017 which fuse did you tap into? Engine bay or cabin?

@AZOverland2017

Жыл бұрын

@@sgthawks3010 Engine bay. INJ fuse. It you need pictures you can email me: thetrilogygroupaz@gmail.com

@sgthawks3010

Жыл бұрын

@@AZOverland2017 email sent

@AZOverland2017

Жыл бұрын

@@sgthawks3010 I sent the pics. Let me know if you haven't received them for some reason.

🗽🗽🗽🗽🗽🗽🗽🗽

Dam if that don’t look professional

@AZOverland2017

Жыл бұрын

Thanks!

This wiring will drain ur battery soon, if u don’t drive ur car for 7 days , be ready to buy a new battery

@AZOverland2017

28 күн бұрын

What makes you say this?

@AZOverland2017

10 ай бұрын

😯💪

👍

@AZOverland2017

Жыл бұрын

🙏