For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► bit.ly/SubRJTheBikeGuy

I'm fixing up an old(ish) road bike and this channel has become my first stop whenever I get stumped or want to see how someone else handled a repair/replacement. Thanks for putting together such great, informative content!

Dude you are the man! I've been dealing with replacing a derailleur cable for like 4 days finally realized I should just take it apart and see if it was busted. Totally didn't have the confidence to do it until I saw your video. Within 5 minutes of watching this, the damn thing is fixed! Much love liked and subscribed

Love your videos. I think you help a lot of people with the same problem, I was about to buy another shifters but watching your vids I fixed my shifters. Thanks dude.

Thank you for your service! So glad someone made a disassembly video! All of your content is super helpful 👍🏻

Reminds me of some old school gunsmithing manuals with illustrations of 'smiths fabricating replacement parts from scratch using bar stock, even making springs from flat stock and wire including heat treating, just to keep an older item functioning despite the breakage of a single small part. That pawl could probably be made from scratch with a bit of metal, drill and some files. Lots of trouble but some day that may be the only alternative to resorting back to simpler downtube or bar-end lever shifters.

What a surgeon! Great diagnosis find.

Great video as always! The deeper in you went, the more I thought..thats never going to back together again!

Thanks so much for posting the video. I'm having the exact same problem with my 105 shifter. I've been planning to take it apart to find out what the problem is, but as I'm pretty sure now there's a broken part inside, I will order a new one right away, and like you, keep the old one for parts.

@seansims4269

3 жыл бұрын

I think I have this prob...

Found it very useful actually - you’ve saved me a frustrating evening taking apart my shifter!

It's nice to know that I am not the only one with this problem on the 105 shifter. Sadly, there are no parts to order, because I was hoping to fix it and put it back together.

@TheQuietBeast

3 жыл бұрын

I have seen the whole "mech assembly" for purchasing. Basically, the internals without levers and rubber. But it is quite expensive :(

Very many thanks... this helped me dig out the frayed end of a broken cable that had got stuck in the shifter.

IIRC, this happened for a few years in that range because shimano only made a triple shifter and it was used on bikes with doubles. You can avoid breaking that pall by using what would be the middle and large ring positions for the shifter instead of the small and middle ring positions when using this shifter on a double. We started changing them to do this in the store before the bikes went out.

@RJTheBikeGuy

4 жыл бұрын

Interesting. I just avoid these shifters like the plague at this point.

@inb4dalock

4 жыл бұрын

@@RJTheBikeGuy Yeah, Shimano never did a recall, but would warranty them within 1 year when on a new bike. They replaced the ST5600 with ST-5601 or ST-5603 for that generation. BTW, I use a 105 rear and an ultegra front on one of my bikes. I really like the shape for that gen. Larger grip for extra hand positions on long rides. BTW RJ, your channel is tops! I just discovered it

@guandasin3099

Жыл бұрын

I was thinking if RJ could have one 3D Printed somewhere, would that work?

@JONJon-COD

Жыл бұрын

@@inb4dalockis there a link or manual to show other openings to attach the shifter. I dislike the cable going out the top side

Same thing happened to my left ST-5600 shifter past year while starting 200-km brevet. Rode whole journey using only small sprocket.

thanks, a broken off cable end was stuck in shifter of my wife's bike, your video aided me. when I took off the black plastic cover it popped out.

Hello there shyflirt1 relative newbie to your vids, but I think you are clear, thorough and talk it through in a methodical and sensible pace (no flashy showing off and showbiz presenters like others!) I don't think I would even have the patience to take these shifters apart! you are a brave man! Having been here (as we all have) where you think why didn't I just devote half a day to this when I haven't got the parts to fix, then we've all been there. Sometimes just best to 'bite the bullet' and replace old for new. I bet bike shops don't get this involved. Keep up the great work!!!!!

Same thing broke on my 2 week old Diverge. LBS waiting on warranty part replacement for 6 weeks not sure when it will be in. I may upgrade based on this video and comments.

good vid despite the unhappy ending. My LH 105 shifter has exactly the same problem so I won't waste time taking mine to bits, I'll just get a new one. Thx!

@RJTheBikeGuy

7 жыл бұрын

These particular shifters are prone to breaking like this. I won't touch used ones anymore.

Shimano used a grease that turns to gum over time. I've brought many of these back to life by simply immersing the shifting head in mineral spirits overnight, then shaking/blowing out the excess and relube with Tri-flo or similar. Keep the rubber hood well out of the way of contact with solvent.

Thanks for this, helped me figure out how to get the remains of my snapped cable out of the shifter to get the new cable in!

Dear RJ - The Bike Guy: Your channel is just the best for bicycle repairing on KZread or the entire internet! Problems with Shimano Ultegra ST-6501 9-speed shifter. Hooked up or not: When pressing the small lever (for shifting in harder gears), the big lever is moving too and the small is not shifting. If holding the big lever and pressing the small one, the small one is shifting without any mistake. Went thru WD40 and so on. What can stop the big lever from moving too? When disassembling being afraid of losing parts. And: When holding the big lever, the small lever is actually shifting well. Kind of strange. What could it be? Thank you very much for your answer.

Super useful RJ! I have the same issue. Your video convinced me it's not worth servicing.

I was wondering if this was worth trying. Thanks for showing me the process.

Thanks for you video!

Hi mate, loving your vids, keep up the good work. Just picked up a Gitane Mach 1400 with Shimano Sora st3300 brifters. Seems the tension on the right shifter (rear derailler) is a lot less than left shifter. Feels a little loose when activating the brake on the right. To me it seems like on the left, as soon as you start moving the shifter, the front derailler moves, but on the right, the rear derailler moves about half way through the movement. Hope this makes sense. Thanks.

Well I still have to reassemble my rhand one and am getting 2 ideas at a time but it's ratchets and pawls and positions and paper thin washers, up way or down way clips and a spring lastly that looked to only rest against the plastic case on one side. Success and I may report.

Just had the same thing happen to my tiagra ST-4500. Looks like Shimano released the 4501 and 4503 to help with this issue.

I'm suspecting this is the same thing that happened with my Sora brifter a few days ago. Chain began to dance around, I made a few adjustments and then as I was shifting it around, it stopped shifting everything altogether. Tried the degrease and lube bit and none of that even worked. Too bad these things are pretty much toast when they're done. Now it's time for new, expensive ass, road or bar end shifters. BREAKING THE BANK!!!

I replaced my 105 twice within 5 months due to the same problem you described in this video. I would not use this 105 again.

Got it figured out. The old head was still stuck in the "guts" and I couldn't see it until I took off the nut in the front and removed the black plastic piece. Then it fell out and I got exactly 9 clicks. Now when I inserted the new cable, I can clearly see where the head seats against a stop. Ready to hit the road again this week.

Thanks very much !

Very useful. Thanks

Like the RJ and Pablo, my ST-7803 Dura Ace left shifter had an identical failure. Same pawl was broken in the same place. From may take, I'd say this is a general design / manufacturing failure. i.e. Shimano engineers not sizing the part correctly for the intended use / load or the metal being poor quality. Unfortunately, in this case, while I'm the original owner, I'm well past warrantee. It's a real shame. Not being able to replace this part (one that apparently regularly fails) now forces me to toss the whole shifter - a very expensive one at that. I expected much more life from components that are billed as high end. Note, this also answers Pablo's question whether the problem could be avoided on a more expensive shifter. This was top of the line. Evidence shows it's an issue across the products. Shimano, a class act would be to step up, acknowledge the issue, and help people replace these components (and/or provide the parts for those of us not afraid to make the fix). As many have stated, the complexity of these devices has gotten out of hand. The friction shifters on my older 40 year old touring bike still work great. Heavy sigh. I should also add - great video RJ! Gave me the confidence to open the shifter up to see if it was repairable. Your whole line of videos is top notch and super helpful. If you found a source for the part please let me know.

You did what everyone is afraid to do haha. Yep thats what broke on my Dura Ace 7800 Shifter and it ate up about an inch of cable and left me ride home in 39x12! I had to fish out the cable end which was a B, then out came a piece of the pawl!!

Ya RJ the softest kind of welding you could do to it would be light tig welding or light electric welding

Thanks - fixed my right hand shifter with frayed cable

Great Videos bro: they are detailed and at the right pace to learn from, your display of confidence and motivation is infectious and liberating; learning from your videos is empowering and potentially saves us all a lot of our hard earned cash, your giving power back to the people as we all know, knowledge is power; be proud and walk tall, your the man.

For sure pays to get in there and investigate after all some assembled it that's my way of thinking! Good job! Such tiny parts and TBH could be better quality! I know some folk including myself had bad problems with corrosion on ultegra Sti shifters not good at all! Still work ok if a little rusty :/

I had exactly the same problem.

I had the same problem with Shimano 105 shifter some years ago. Now the spring of my Tiagra RS405 is broken. Parts with low quality, unfortunately.

very useful, thanks. saw a listing for the same shifter for sale described with the same issue. shan't be buying that.

anyheck, it's for sending data to a Shimano Flight Deck computer.

Great video man! I have similar problem with my hydraulic 105 right one. A little different than yours, with some C-clips and things. But I am not sure I want to try, it feels like I will end up with the same conclusion. But on the other hand, nothing too lose except precious time.

@RJTheBikeGuy

3 жыл бұрын

kzread.info/dash/bejne/pIOsrZuNisTLprw.html

@TheQuietBeast

3 жыл бұрын

@@RJTheBikeGuy Thanks, but I noticed it was really simple. It was the return spring for the big lever. Big lever didn't return well and thus blocked the small lever from working. I put the return spring back in location and now it's like new again :)

Hey RJ, thanks for posting this video 8 years ago! 🙂I have a left, 105 shifter with the exact same problem...broken pawl and won't shift under load. In your video you said you'd retire that shifter for parts...did you ever end up fixing it? Thanks!

Can you do this to the Shimano Ulterga 6700? My old Sora 8 speed are working great and the newer more expensive ones stopped working. So I will be downgrading those for something externally routed. Vintage is best.

Hi! I have disassembled my ST-6600 shifters, I took photos of the process but somehow I cannot figure out how to assemble the brake return spring(the one you have in this video as well) could you somehow give me some advice? I'm lost

This is the nearest to a how-to video so far, for this era unit which is like my Dura Ace ST-7800. I am only going to remove the lever and covers to spray clean, lube w/ plastic safe stuff. I'm curious as to whether one can simply cut or pull off the electronics that will never be used, or if that flat cable strip actually provides some extra mechanical purpose like retaining the area the broken piece was in?

@RJTheBikeGuy

9 жыл бұрын

z1522 I am pretty sure you can just cut it.

Thank's

Exact same part broken on my Tiagra shifter (4500) which I recently disassembled. So annoying that the whole thing isn't usable because of one little thingy..

Nice!!

Uggh…now I’m dreading to get home and find out if this is what I just broke on a brand new Microshift brifter

S Word, the right shifters generally shift with less movement than the left shifters.

Interesting yes. A lot of parts to make those things work. How can you tell that part is a low quality metal?

@RJTheBikeGuy

9 жыл бұрын

Just how the break looked. It looked like it was made of pot metal. It might be a better quality metal.

Many thanks again RJ.... I have the Tiagra 4600 which looks to have trickled down from the 105, almost identical to this and it has the "annoying Shimano rattle/buzz"....This happened on my "el cheapo" Tourney STI and was simply a case of removing the front parts and there's a (god knows what it does) loose washer in there that needed a dollop of grease and it cured that- it's the same(but different!) bit where you took that 8mm nut off the front with it's retaining clip? But now I know this can't be the cause as it's a nut and tight so will keep trying.... Tactical grease and maybe some foam inside the guts....

I have this problem, but the other way; I can't shift up. No clicking going up, although if I hit it whilst holding it in, it'll work.

Hola q tal amigo ami me paso lo mismo ..donde puedo conseguir esa pieza q tienes en tus dedos se rompió o solo se salio de su lugar espero me puedas ayudar

Hi, have you got an idea what the purpose is of the white flat cable in the shifter? I also found this in a Shimano Sora and thought it was a plastic string that was stuck in it. I have the exact same shifter (an 7speed in stead of 8 speed) with the string removed and it works perfectly.

@RJTheBikeGuy

8 жыл бұрын

+semarq It's an electronic cable. There is a space on the side of the shifter where a cable can be plugged in to go to a Shimano flightdeck computer.

@sennemarquenie

8 жыл бұрын

+RJ The Bike Guy Alright, thanks for the fast response. Big fan of yours btw... Cheers from Belgium

Same issue happened on my 105 ST-5800

@RJTheBikeGuy

5 жыл бұрын

Hmm.. I know the shifter in the video is very prone to it. I haven't heard about the 5800 though.

@mikeinhoodriver

4 жыл бұрын

Just had my St-5600 do the same thing yesterday. Too bad you can't rebuild. Did find a used left hand in Ebay however, so not to painful, just seems like a waste as mine was like new.

I am sorry, but I have the same issue on my 105 ST-5600. Just disassembled it thanks to your video and sure enough the piece is broken in there. Did you ever figured out where to get that broken part from or at least the name of it? Thanks.

@RJTheBikeGuy

7 жыл бұрын

Nope. I am pretty sure you can't get the part. They are toast. I won't buy these particulat shifters anymore.

Same problem on my Claris leftie. Can you recommend an alternative shifter, even a different brand (if that's even possible with the 8 speed Shim casette)?

@RJTheBikeGuy

5 жыл бұрын

Have you verified it's broken? This specific shifter is very prone to breaking. Most are not nearly so. Often cleaning a lubing will fix them: kzread.info/dash/bejne/pnqh07htm8_gkbw.html If it's broken, you will have to shop around. There ares of options.

It's not small to weld... if one is a licenced TIG welder (like me). With a footswitch and low amperage it will be fairly easy.

Hi Is it possible to find and replace the springs that keep the lever handles in place? The bigger handle is not at the same level as the smaller one

@RJTheBikeGuy

5 жыл бұрын

I don't know the problem you are having, but parts are not commonly available for these old shifters. Maybe on ebay.

hey! this is such an old model groupset and i happened to have a hand be down, wondering if it is possible to change the hoods without disassembling all the shifter cables?

@RJTheBikeGuy

3 жыл бұрын

No.

muy buena tarde. tengo un problema con ergopower shimano 105 11v. cuanto le doy clic para subir el plato sw pela y no hace mover. si le quito tensión a la guaya si trabaja bn haces los tri sube y baja. le agradezco mucho si me pueden colaborar. son nuevos

I have the same 105 shifter (ST-5600) but have a problem with the right one. The rear derailleur cable snapped off at the head inside the shifter. Either the old head is still in there and I can't see it or it fell out on its own. It's pretty straight forward inserting the new cable from the right side (when on the bike) and the head comes to a positive stop inside the mechanism. I routed the cable to the rear but when trying to adjust the derailleur, I'm only getting about 3 clicks instead of about 9. I'm guessing the old head is still in there or else something is broken inside. I'm reluctant to take it apart just yet. Any one have an up close photo of the right shifter showing the "guts" where the cable is inserted?

Hi RJ Do you know if st-5800 suffers from the same issue?

@RJTheBikeGuy

4 жыл бұрын

No idea.

What is the electrical connector used for?

@MrSnoop030

7 жыл бұрын

Its for an optional flightdeck.. The flightdeck will tell you on a display inj witch gear you are riding ass wel ass the front and the back

the rare unhappy ending!

@RJTheBikeGuy

9 жыл бұрын

Yep,

my left ST 5800 brake lever suddenly jammed, it can't be pulled at all.. but the shifer paddle still works fine.. tried washing the inner with WD40 but still won't budge.. any insights?

@RJTheBikeGuy

7 жыл бұрын

Sorry, not sure what the issue is. Could be something broke, or jammed or something else.

I had exactly the same problem with mine. I guess I need a new one. Will ultegra shifters work with my other 105 components?

@RJTheBikeGuy

9 жыл бұрын

Yes. 105 and Ultegra components are pretty much interchangeable.

@rhinsac7553

9 жыл бұрын

Thanks!

R.J ....need your advise can i use a 105 triple left side shifter on a double Front derailleur and Chain Ring. Will it work ? even though it would not be as Double shift Front shifter. thank you.

@RJTheBikeGuy

7 жыл бұрын

Yes it will work. The shifter will just go into 1 and 2. The limiting screws on the derailleur will prevent it from going into 3. kzread.info/dash/bejne/hX5-285pqLPYepM.html

@ianl.4470

6 жыл бұрын

This project from the OP is probably done, but for anyone considering this - just note the front shifter can actually get jammed in that 3rd "invisible" chain ring if you shift into it by accident (on a 2 ring system). I have a Tiagra LH shifter that I would accidentally shift into 3rd gear - tried to tune it out with the limiting screws, but never could entirely prevent that last shift. Things got a whole lot worse when, during the tuning and shifting in and out of this "3rd gear", the shifter finally jammed and wouldn't shift out of this invisible gear. I suspect I broke the shifter as my front gear is now permanently stuck on the smaller chain ring. This has been documented elsewhere too.... :( forums.roadbikereview.com/specialized/alliz-sport-shifting-problem-172465.html

Hi I have Shimano Sora and the front shifter doesn't ship down properly. There are 3 front gears but when I'm on the lowest front gear and shift down, there is a TAK sound but nothing happens! The shifter sounds like it has four gears but it doesn't! Why is this happening? Thanks

Shimano has done no one a favor by creating such over-engineered, vulnerable, and often absurdly expensive contraptions. If you ever studied science you were probably introduced to the "Law of Parsimony" which states that the best explanation for any phenomenon is the simplest one. I think there's a parallel to bicycling components: the simplest mechanisms for getting a job done are ALWAYS to be preferred to more complex ones. A complicated, vulnerable, failure-prone method of shifting gears may make Shimano happy, but that method is certainly not in the best interest of bicyclists!

@hermittranslator

7 жыл бұрын

jihhwood Are only Shimano's brifters known for this? Or other companies' too?

@RJTheBikeGuy

7 жыл бұрын

I have seen this issue a lot on the left st-5600 shifter. It looks like it was a design flaw with a part prone to failure.

@jihhwood

7 жыл бұрын

Don't know. Sorry.

@shujin7024

6 жыл бұрын

Would you go as far as suggesting to us a better way to shift them gears !?

@st3ange21

6 жыл бұрын

shu jin sram

Hello Sir, I am look for a Shimano 105 ST-5600 2x10. Looking for the lever clamps. I’ve searched everywhere not to be found. Do you know or have any laying around? Looking for 2 clamps. Thank you, amazing information for your videos. 🙏

@RJTheBikeGuy

3 жыл бұрын

I don't sell parts. 5600 shifters are 10 speed, not 9 speed. And the the left shifter is junk. Avoid them. The clamp are probably the same as other similar shifters.

@sleeks9939

3 жыл бұрын

RJ The Bike Guy sorry correction 2x10. I purchased them used last week. So they are junk? 😓 I guess the internet is misleading.

@RJTheBikeGuy

3 жыл бұрын

@@sleeks9939 As pointed out in this video, the 5600 left shifter is prone to breaking. I personally won't buy 5600s anyone. The left shifter will be broken, or will break. I used some 5600s for a 1x10 bike where I didn't care that the left shifter wouldn't shift.

i paused this a 48 seconds in and my guess it the little spring that releases the pawls is broken. That was the problem with mine.

@cedricojesus176

7 жыл бұрын

I dissasembled mine and you´re wright. Did you made a sping or fit one close enough?

@RJTheBikeGuy

7 жыл бұрын

If parts in these break. The shifter is generally toast.

@lealamb

7 жыл бұрын

Cedrico Jesus I bought a new set of shifters. It would be almost impossible to find and replace the spring.😱

What is the purpose of the flat white ribbon cable? it looks like an electrical ribbon cable lol.

Is 5800 hood compatible with that

I was gonna say that shifter is totally done for, these aren't designed to be field maintenable

What time of marine grease do you you'se?

@RJTheBikeGuy

9 жыл бұрын

"Peak Performance" brand. Bought it at the local auto parts store.

Hi, could you tell me what that electric flat you indicate at 3:56 is for? I took apart my controls and it broke.

@RJTheBikeGuy

3 жыл бұрын

For some sort of bike computer connection. I have never actually seen it used. Maybe the pros back in the day.

@vincenzo3927

3 жыл бұрын

@@RJTheBikeGuy Thank you! So it is not an indispensable element for my luck! You were better at not breaking it, unfortunately I was not able!

@janeblogs324

Жыл бұрын

Its the flight deck plug. Connects to a shimano LCD screen to tell you what gear your in

I have a broken 105 10-speed left shifter and I would like to “gut” it and remove the shifter and just use it as a brake lever for my 1x10 system. Anyone know how to do this? This video is a great start, but would like to take it further. Apparently this is easy on a SRAM shifter. Thanks in advance.

@RJTheBikeGuy

5 жыл бұрын

I just left the guts in mine for now. kzread.info/dash/bejne/fXyMu7Bqequef8Y.html

I came to this video from a thread of issues with the Shimano 4700 left shifter... So either it will be yet another faulty shifter to return, or it needs TONS of tension. Either way, they suck. And because I had bought a new cassette and rear derailleur, i found out I also needed the new shifters, as the 4700 set uses a different pull ratio that the previous ones!!! So rdiculous. I guess SRAM will get my business from now on.

@RJTheBikeGuy

8 жыл бұрын

The shifters need to match the cassette. So if you have a 10 speed cassette, you need 10 speed shifters. 9 speed cassette, 9 speed shifters. Generally, you will need a Shimano SIS derailleur that will reach all the cogs. So it doesn't need to specifically match the other stuff. Usually close is good.

@ybmobi

8 жыл бұрын

Man you reply fast LOL. It didn't start planned out this way, but now I have the whole group set. So compatibility is not supposed to be an issue. From what I've read, either the shifter came faulty and needs to be changed (hello quality) or it needs all the tricks in the book to make sure the cable tension is very high, as that precious little baby needs it... Why is it so complicated with Shimano? From all accounts, SRAM is taking over more and more of their business because of such issues

@RJTheBikeGuy

8 жыл бұрын

Actually I find Shimano pretty straight forward. Some of the newer shifters are poorly designed, like this 5600.

i have the same problem with my left tiagra st 4500 exactly the same part! what where you able to do with it? or may you please share what website that fixed it?:o

@RJTheBikeGuy

8 жыл бұрын

Nothing you can do except replace the shifter. The parts are not available.

@pobps

8 жыл бұрын

thank you very much for your reply sir!:) btw, does this mean that the tiagra and 105 shimano shifters are not that good? what would you suggest?

I was able to fix this on my shifter.

@RJTheBikeGuy

7 жыл бұрын

How did you fix the broken piece on your shifter?

@justbreakingballs

7 жыл бұрын

RJ The Bike Guy i know him, he cnc machined an exact piece

these things have a built in shelf life they are meant to break so you have to buy a new one.

@instaminox

4 жыл бұрын

that is what YOU beleive ... as a consumer :)

These things are like a clockwork, if it breaks you arent going to fix it yourself without machining some really small and specific part. And they are all being made with plastic and cheap thin aloy metals that wont resist anything

Interesting.... since this is a mechanical shifter, I wonder why there is an electronic ribbon cable in there.

@RJTheBikeGuy

7 жыл бұрын

There is a Shimano flightdeck computer that can plug into the shifters and record gear selection,

@VegasCyclingFreak

7 жыл бұрын

Oh... very interesting

so did you fix it or nope?

@RJTheBikeGuy

8 жыл бұрын

+jonn bonilla No, it's toast. Parts for these shifters are just not available and they are prone to breaking.

@cautacio

8 жыл бұрын

Yeah i've used your video to open my left broken shifter and that was right the same part the trouble

Hi RJ awesome video! I've recently picked up a bike with a set of ultegra 6600 shifters. The left was not working at all and the right was half working (didn't always catch when shifting). I tried flushing them and this worked fine for the left shifter but in cleaning and flushing the right I found that it now catches nicely but does not click (aka complete the shift). The right shifter will only shift if i put cable tension, kind of the opposite of what you see in this video. Have you seen this before? Since the rear derailleur kind of keeps it under tension, it will "work" but it would be nice to have it running perfectly. Thank you for your help!

@janeblogs324

Жыл бұрын

Did you find a fix?

@philburden5761

Жыл бұрын

Yes, the front shifter was broken. Without getting into too many details, it seems a piece was not being raised high enough to disengage the gear. I ended up fixing these with a washer that I cut up and bent to shape and jb welded it on. It has worked wonderfully for the past 9 months or so!

@janeblogs324

Жыл бұрын

We all want as many details, there seems to be 3 unique problems and my 5600 set are both having different left and right issues

@philburden5761

Жыл бұрын

Hope this can help anyone!

105 is 3rd tier gruppo. This is unacceptable. Seems all of the new stuff is engineering plastic (garbage). Good video however

How's the patient Doctor? I've diagnosed the problem Oh great so he's on the mend. No sadly he's still dead.

5800 shifter go change good gear 11 speed

man that looks like a pain in the ass

Lol, Mine broke in the same spot.

Theres a electrical part in a freaking shifter?!

@RJTheBikeGuy

6 жыл бұрын

It was used to plug a special cockpit computer that would also monitor what gears you are in as well as speed, etc.

I got this shimano 105, I changed the cable, and now when I shift down it goes for 3 or 4 gears, I click to shit lever it clicks once, but when I release it, it clicks again and drops 3 gears at once. Anyone knows whats wrong? Thanks Gears are indexed perfectly, only gearing down is bad.

@RJTheBikeGuy

4 жыл бұрын

kzread.info/dash/bejne/pIOsrZuNisTLprw.html

They suck and are overpriced.. I'm using bar end shifters with solid single speed trp rrl levers these days on my touring bikes not only they look good they last forever and no servicing costs single speed levers are a lot cheaper. I'm using rohloff but would be happy with bar end shifters if running 10 or 9 speed 11 sucks when touring on longevity

@RJTheBikeGuy

3 жыл бұрын

This specific model sucks. Most of them are better.

Buy a used one

I made a How To Reassemble video if anyone's interested in putting it back together! :) kzread.info/dash/bejne/ooOfx82fos-_eNY.html