This is the car I’ve been most looking forward to an update for!

I’m really interested in the progress of this Jaguar and would like to see more

Very interesting. A scientific approach on the old XJ.

Hope you make more frequent video updates on this XJ.

Put in a new contactless ignition set from Sparkrite. It's what i did to my 1975 Xj6 C and it transformed the engine response and i have NEVER have never had ANY problems with my ignition system since

I saw the previous video about this jaguar and I was really looking forward to the continuation. This was again a really great video, repairing a beautiful classic car step by step. Keep recording the progress !

Really like your methodical approach. I second the comments on checking the ignition advance - both the weights and the vacuum.

This was really informative . It is also good to hear from someone as experienced as you are, that sometimes things don’t work out the way you expected. Thank you for taking us on your journey.

I really want to see a new episode on this jaguar! very beautiful car, it’s a pity that it’s still very sick

Great video and excited to see more updates on this car. Today I purchased my first Jag, a Series 2 XJ6. Will probably be on a similar journey with it as you are going through now.

Hi Steve,..great video again on the Jaguar XJ6. Please do continue with videos on upgrades of this beautiful Jaguar XJ6. Great job,...thanks.

Happy to see more videos on the jag! Although, I do really enjoy all of the videos you do!!!😃👍🏻

Excellent series and interesting to see the incremental changes and dyno results each time. I'm amazed at the condition of these old classics you keep finding. I'm sure you are paying good money for them as they're getting harder and harder to find in this kind of original, unrestored state.

Plugs colour indicated lean mixture from what I could see Steve, I ran an E type from the same era as that XJ for 15 years and never had any problems with the old original points and coil ignition components. I'm keen to see the next installment of this car tuning.

You did a real good job. Engine sounds great thanks to those 7 main bearings. Looking forward to your carb tuning.

This is a great series and I'm looking forward to seeing what actually fixes the issue. 40hp is just crazy low, I'm amazed it runs as well as it does making so little power.

Just rebuilt the Stromberg's on my 1972 V8 Range Rover and it really made a BIG difference ....... May help with the XJ6 ....... Love the car, my Dad had a Daimler Double Six Coupe back in the 1970's ...... Have always loved them ...... Good Luck , Cheers. Richard

Very interesting! Please continue!!!

Hi Steve, it's really great to see a Series 1 Jaguar XJ being brought back to life, can't wait to see how much power you end up getting back. Here's a couple of thoughts of things to check : 1. Fuel pump operation and pressure at the carbs; 2. Crankcase breather system, check for blockages. Dave

Yes, Steve, please keep us posted!

Great info!! I'm doing a restoration on a 1972 XJ6 and will be installing a Pertronix dizzy with matching coil. Keep up the XJ update please.

yes please more videos on this gorgeous XJ6. Hunting for the source of a persisting issue can be very frustrating, I know. And quite a few new parts go on an engine that doesn't perform optimally but eventually it should pay off

I think you're right about the fuelling. I'd ditch the points in favour of electronic ignition, preferably a 123 system. Love the xj6.

@richardporter6201

3 жыл бұрын

I put a 123 distributor in my TR6. Clear improvement.

Looking forward to the next episode on this car!

Great stuff. Keep it coming!!!

Takes me back to my MG days playing with the ignition of course without the dyno!

Keep going this is going to be interesting when you find the cause.

Looking forward to the next update.

Go for it Steve. Apart from fuel and carbs i'm at a loss. For a mark 1 xj it's in good shape and getting rarer and you are an excellent surgeon what's not to like?.

Excellent vid!

Really want to see the latest on this. That is the best colour for one of these early cars. Beautiful. It'd be great to see the car making proper power again. Please do another episode!

@stevepearce6689

3 жыл бұрын

Squadron Blue is nice too

Please keep going pal. Looking forward to the next episode

I had a couple instances where I was sure the problem was ignition, but it was a clogged fuel filter. 9 times out of 10 its ignition, but as long as the timing is advancing through the revs, the fuel system is the next stop. Still, might be of benefit to pull the dizzy and check the bushings and breaker plate rotation. the first XJ is one of my favs, so def enjoying this series, although its hard to get past my jealousy!

Very interesting. Keep at it and good luck

I absolutely love this car. Glad you showed it again. Carb issue?

great vid. Keep em comin

Great video despite not showing what you hoped for. Suggest Fuel and Air next, with dyno run in between each - just like in this video.

If you can access one get a dwell meter to set the contact breaker points gap to perfection, also fit new needles & jets to the stromberg carbs, suggest that you fit new diaphragms while you have the carbs stripped down as they do fail with age, Happy tuning !!!

My favorite Saloon car Jaguar is the earlier Mark 10 version. Wonderful lines.

Excellent work, i like your methodical approach. The original rotor arm is a rev limiting rotor arm, this might explain why it wont rev very high. The max distributor revs should be stamped on the outer ring. Also the distributor looks like it is missing some parts, like the micro adjuster wheel. I cant wait for the next update.

I'd love to see an update on this Jag.

Nice to see and learn, maybe a problem with the type of fuel, leaded or unleaded? Carburator doesn't work correct or pump issue? I don't know, I'm enjoying your working step by step...I'm not an expert, love your working method...great...

Great Job this is a Beauty.

I replaced my ignition on my TR7 with an Alison electronic optical system. The reason was I put an ‘80 engine in a ‘77 mint California body and the Lucas systems were different. It paid off in being able to drive for a week daytime without an alternator It also worked at night when I tuned the lights on for a moment snd switched back to parking lights and drove 8 miles home with less than 5v on the battery. Alison ignition works y to around 3.5v and still gives a 10,000 volt spark!

Taking it step by step was very interesting. Want to see the fuel system results.

I had a SII V12 and the distributor in that is in a diabolical position also. It had a well known US brand optical pickup and electronic box. It failed twice. Turns out the upgrade was a downgrade. What I ended up doing was I converted the stock dizzy to reluctor and pickup from an HE V12 by building one distributor from two - an HE dizzy and the pre HE dizzy in it. I didn't know at the time if it was possible actually, but yeah it is. I used the 'Lucas' HE control box. It is not in any way Lucas as it has an off the shelf GM HEI module inside it. For good luck I replaced that module. Put it all together with the twin early type HE coils (firing and non firing) and I could not believe the difference. The starting, esp the hot starting the idling and the top end RPM was so improved it was utterly amazing. It must've picked up 100hp! I took the injectors out after that I was so impressed and the spray patterns were all over the place, so I refitted them and replaced the fuel pump and filter just because I could. It became imperceptible the idle and that smoothness! I hit an escaped farm animal at slow speed and it did so much damage to it that it was uneconomical to repair. The animal fared far better than the car. It rolled on the hood into the A pillar and just walked off as if nothing happened lol. Screen, hood, grill, bumper, front fender and it weight of it pushed the radiator support panel and the radiator down about 3 inches and the engine fan deflected into the radiator. It was like a slow motion crash. Even one of the intake manifolds got cracked. Effing farmers. I now have a 1980 SIII V12.

love that Jag so yes please, more content! Have you done a compression test on the cylinders? Didn't these engines have head bolt issues too?

I had a 1961 MKII. I lifted the bonnet (hood) in the dark one night to see if there was any leak from the plug leads that sat in between the cams. It was like a spectacular light show, with sparks going every where. I believe the leads should be running through a tube that is suspended by the head bolts on one side.

Those old plugs looked about right. cheers. p.s. yes,more please.

Steve. That engine sounds so sweet , even under load. And the way the rear drops when applying power tells me there's nothing inherently wrong . It must be making more than the dyno indicates. The only thing l noticed was she sounded lumpy when you checking the timing. I would remove all the smog gear (and probably the air con) swap the Strombergs for S.U's , and then you'd have a Jauar that drives like it should. Next time your in England drive an early one and you will be impressed and take the opportunity to get S/hand carbs.Sounds obvious but l'm sure your aware that water used to get into the tanks. I expect you drained the tanks and put fresh fuel for starters. Very nice looking car. I still miss mine from 40+ years back and the Series 2 had smaller carbs and really struggled to get up and go.

Great series and love the methodical approach. Amazed the car produces so little power. I'm no expert but maybe a compression test on each cylinder might reveal some useful information.

Hi - was hoping to see the next instalment after you sorting out the carburettors

Hey Steve, would love to know if you're still working on the XJ?? Great videos and give me hope and motivation:) I'm about to start the process of trying to get my Dad's XJ Series II running again.

just don't stop until this car is running better than new!

It has to be a fuel issue. Looking forward to the next episode

Hi Steve. Thought you would have, with the amount of vintage cars you have. Hope you find more soon,,👍

Vacuum advance weights in the bottom of the distributor will be seized. Remove the distributor and free them up and you'll get your power back.

I too think part is in the advance possible the springs on the weights or stuck weights plus the distrubtor bushing is probably well worn needing replaced. I don't know if the Jag has a vapor tank but it could be full of dirt too. Coolant temp senor could be bad too. Now we are all curios to see what fixes the Jag!

You’ve got it looking really good. I’m interested to know if you worked on the fuel system.

This was great. Was there any more progress?

On my BMW R80 with Bing carbs I had same problem i.e. wouldn’t rev past 3500/4000. Problem was worn needles and jets. Difficult to tell just by looking at them. Replaced them. All back to normal.

Love that old Jag, great interior. The horsepower seems quite deficient. Possibly do compression or leak down test on the cylinders.

Is there an aftermarket electronic points replacement? For German cars you can get Pertronix and compufire modules that replace the points and condenser. The other ignition item might be a multispark unit, which is usually overkill but looks cool. Definitely think that upgraded fuel pumps, filter, and maybe cleaning out the tanks could help. Fun cars! Enjoying the videos!

Looking forward to the next video on this. I wonder if there may be an issue with mouse nests restricting the exhaust. You did blow some crap out of the exhaust when you first fired it up.

Nice update although what you did isn't really an upgrade, more of a refresh. Hope you find your power and revs ! The XK engine cylinder numbering follows the convention of aero engines, the designers based it on wartime engine techniques and technology which is why it was so advanced at the time.

I can only offer the experience with my 1970 MG B, the distributor had been given my a lot of strife and I could not get a steady readout with my timing light. Bought a 1-2-3 electronic distributor and new leads, plugs. The difference was between chalk and cheese, the Lucas (and they are not called The Prince of Darkness for nothing) distributor was giving a trace all over the place , but when the 123 was fitted the graphs where clear and steady. I think fitting all the rest of the gear was a good idea anyway

I’d like to see what you’d do in adjusting the carbs. I replaced the ignition system in my Sprite last year and adjusted the carbs to best I could and I still have a low rpm misfire.

Hi Steve, o/haul those Stromberg CD's, replace the diaphragms, they will have lost all of their flexibility and won't control the piston/needle for proper air/fuel ratio. New fuel filter, fresh high octane fuel. Reset your points with a dwell meter. All of this provided it's mechanically okay. All the best from Australia.

Lovely classic British built motor 🤣 Interesting how the old parts looked so bad but it still worked lol 😂 cheers Stevie 😎🇬🇧

These cars have a classic look to them that is timeless. Even though you didn't get any increase in HP, the engine does sound good.

You could try spraying a very fine mist of water into the carburetors to give the inside of the cylinders a good steam clean. Another idea I have is maybe installing trumpets on the carburetors so the airflow smooths out and provides better attermisation which improves combustion.

Steve please check the secondary throttle inside the manifold. I suspect it is disconnected or misadjusted. It could be partially or even mostly blocking airflow.

@ThisWeekWithCars

11 ай бұрын

I will check!

Thinking about buying one of these - mind you it is running. That being said I’ve learned so much from watching this series… not sure I’ve got what it takes to actually pull the trigger and make the purchase!

Four possibilities; either the advance mechanism may not be working correctly, or the shaft bearings have too much free play, or excessive wear on the cam lobes, or bad wiring on the distributor low-tension circuit. But it could also be the fuel pump, filter or damaged fuel lines. Or blocked high speed jets in the carburettors, or an air leak on the intake manifold(s). Or...

Great vid. Would it be worth checking fuel contamination? Had water getting into the tank on an old car with similar problems, but did also produce a miss fire.

Looking forward to your next video, fuel system.

I would fit an electronic style distributor , preferably a programmable one . Also check the TDC by removing the spark plug and check the actual piston is at TDC.. check all cylinder compression making sure you have the throttle wide open when testing . Once that has all checked out see what air fuel ratio you get at wide open throttle maximum load ...you want it around 12.5:1 . Try 30 deg total maximum advance and move it a few degrees either way to see what gives best torque.

You could try rebuilding the carbs and checking for vacuum leaks

How’s the 1971 Jaguar XJ6 ? Any updates ? Maybe a new and upgraded camshaft that would open the valves a bit more. I would like to see more on it. Thank you.

Enjoyed the videos on this car how you getting on with it?

It sounds like it's sorta got breathing problems. May be the exhaust is a bit blocked or the wrong muffler. It could even be a bit crushed. That's just what I'm thinking. It should have better gains from what you changed from what they were, especially those leads. Can't wait for next video, I really like them

@ThisWeekWithCars

4 жыл бұрын

This car has catalytic converters my thought has been they might be clogged.

Really want to see this Jaguar purring again 👍. Nearly all the ones in the UK have rusted to pieces and died.

Split/perished diaphragm in the Stromberg carbs, it is running lean. I would also chuck the points and condensor in the bin and fit a contactless ignition system and a new GT40 coil.

I suggest you check the advance inside the distributor and have the dwell angles checked at the same time.

The Lucas points and condenser ignition system on these cars is known to work superbly even after 50 years!

Let's see this beauty restored to something like its proper performance.

Hey Steve, I think I will get my first Jag its a 83 4.2L series 3. Standing 10 years..... I loved your videos and made me not to afraid to purchace the car. Do you have any good advice to start getting the car back on the road?

I love the car and always wanted a Series 1, had a few Series 2 and one Series 3 V12. I believe the best idea would have been to go for electronic ignition. Part of the reason the Dissy is hard to access is because the XK wasn't designed for that car and it was designed back in or around the late 1940's to go into the XK120 sports car. I would also replace the AED with a manual choke conversion. It may be a good idea to cherck and clean the Earth/ground connections of the car. Judging by the spark plugs, the bores are very good and fuel mixture is spot on.

@markstott6091

3 жыл бұрын

There is no AED on this car, it has a manual choke.

@JonDingle

3 жыл бұрын

@@markstott6091 I can see that now. Originally it would have had one. The AED soon went unreliable and gave starting problems. The manual choke conversion is far better.

Did you ever do the fuel system maintenance? Did you do an electronic ignition?

Yes keep working on the Jag please. Check the compression. Change fuel filter then dyno test, fuel pump then dyno again finally rebuild carbs then dyno. After check valve clearances. Adjust if needed and dyno.

@graemelliott3942

4 жыл бұрын

Doctor MENGELE you’re right. It’s basically free to check valves and do a compression test. In the end I bet is a fuel starvation issue. No power over 3K rpms and only is getting 40hp @ the rear wheel. Should be getting like 120-140 hp at over 5K rpm🏁

Absolutely dump the Lucas distributor and go with a Petronix or 123. Check for vacuum leaks on the shafts using raw propane. Any increase in idle will be indicative of problems. Balance your carbs and make sure the linkages move both butterflies equally. Give us a wet and dry compression check as you might need a valve adjustment or have worn rings. Run some Sea foam and BG44k directly into a vacuum line. Those products really clean out crud and you'll see smoke for awhile as they work.

Steve in england we had the Su carbs which in my opinion were better i once worked on a american import jag i took all the emision equipment of it ended with a box of junk after that came of the car flew . I like to gap new points at 16 thou so whe the heal wears initialy the gap closes a few thou , i also think a electronic ignition would help also these are high comp engines they need good high octane fuel.

Hey Steve. Let's see the next video

There are probably many small problems here and everything you changed was worthwhile. Wear in the distributor can definitely cause erratic timing at higher rpm and break up. That should be pulled and rebuilt or replaced imo. At a minimum verify that the advance moves freely and the springs are in place.

Please continue

Check for vacuum leaks before trying anything else. The hoses and fittings are likely very elderly. When I restored my TR6 fixing the vacuum leaks made a noticeable difference.

I have a 74 XJ6 so I am following this closely.

looks to me like an air flow issue. The exhaust seems restricted a little, and it is multiplied as the rpm's increase.

When will you do the next step on this Jag? Eagerly waiting.

@ThisWeekWithCars

3 жыл бұрын

Parts just shipped

Just a thought. Is it a mechanical advance distributor? Could the springs be worn, old or the mechanism sticky?

@rhiantaylor3446

4 жыл бұрын

@Sean m Best to check timing at higher rpm too, quite separate from the vacuum timing variation. I would have twisted the rotor arm to check for free movement and possibly looked to see movement to the red timing mark to do this check but was not mentioned.

@AndyMarsh

4 жыл бұрын

@Sean m I could see that.. If the distributor is stuck and the timing is not changing from initial it's really going to struggle.

@lrcb40

4 жыл бұрын

I think it's a vacuum advance, so a) check the vacuum tube hasn't got a leak or collapsed - reducing the vacuum at higher engine speeds and b) that the base plate of the distributor is moving. Any rubber hose on a vehicle this age is automatically suspect IMHO

@eddybetanya

4 жыл бұрын

I changed the fuel filter on my volvo s80, the difference in performance was dramatic. You got two fuel filters, new ones may help.

@eddybetanya

4 жыл бұрын

Years ago my mate had an S type Jag, his fuel pumps worked but were very lazy, I'm sure he had to change them.