We specialize in high performance Toyota automatics, as well as many other models. Find Us: www.importperformancetrans.com/ 973.406.7000 Instagram - @IPTperformancetransmission Facebook - Import Performance Transmissions Tik Tok - IPT_Transmission

So I just wanted to thank you again for our conversation yesterday about the valve body situation. I did make a little bracket for TFT2 that keeps it down in the pan next to the bottom of the filter (where the filter inlet is) and it’s working surprisingly well. No codes after a 15 mile test drive. It’s dialing itself in and the shift timing is good. I understand this is not really something that people should be doing as professional work! Anyone in this situation, just get the right valve body the first time!!!! What I did was not suggested by the Man that created this video!!! I did this on my own to evaluate the condition of the transmission I was working on and to get myself out of a jamb…….but it did work!

@iptperformancetrans

3 ай бұрын

Good work- adapt and overcome, I’m sure that it will work (or at least that won’t be why it doesn’t)⚙️

Also if you’re interested I now have a spare valve body w both temp sensor cavities and a Sonnax “Sure Cure” kit installed that may just need a couple of pressure solenoids installed. I saved the parts I took out when I installed the VB kit also.

@iptperformancetrans

3 ай бұрын

Sure, give me another call later, I may be interested in it

I’m talking about maybe making a little bracket that I can zip tie the sensor to where it is down in the pan far enough to sample the temperature

I own a repair shop and I. Bought a reman valve body for a vw 01m on eBay during covid because my local transmission suppliers didn’t have the transgo kit I always install on them in stock they couldn’t get for a few weeks. I went on eBay to buy a kit and found reman valve bodys the list was endless for 100 bucks. I messaged a seller with good feedback asking if it was actually a reman or just a cleaned up used part and that I will be taking it apart to check before I install it. They assured me it was a reman. So I ordered it. When it showed up and was not why was in the picture because the picture showed new solenoids but I got one that someone took apart without the tool so the connectors from the ribbon harness were broken off in the solenoids. The pr bore was egg shaped so bad that the transgo kit I install in these likely wouldn’t even work. They gave me the run around trying to get my money back. I said what you are doing is fraud ur selling me a “reman” unit that’s in the worst condition I’ve seen.

@iptperformancetrans

Ай бұрын

Not really surprising- That sounds like the kind of valve body that you would get for $100

So what happens if I just leave TFT2 in a place where it can sample the fluid temperature? I mean the rest of the casting doesn’t look any different. By the way I am in that boat right now.

@iptperformancetrans ,is there a major difference between the ab60e and the ab60f valve bodies? 2wd vs 4wd. Thanks for any knowledge you can give.

@iptperformancetrans

2 ай бұрын

They are fully interchangeable, there’s nothing specific in the valve body that makes it 2wd or 4x4

So I did buy a valve body on Ebay. Mine in my truck has the 89010 casting number on it, but the one I received has the 8870 casting number. BUT the one I received does have the 2 temp sensor holes and the separator plate does have the L01 number on it. If the only difference is the 2 vs 1 temp sensor holes, does that mean the one I received from Ebay will work, even though the casting number is wrong

@iptperformancetrans

3 ай бұрын

It should be alright but I can’t guarantee it

apparently chinese clones? (some poorly done) similar to chinese clone body parts.. its amazing they can go to the trouble of making a casting to create valve bodies or dies to make body parts to sell in the US (online, ebay, or...) . Obvious attraction is the price difference from OEM (toyota) in this case. thanks for the heads up!

@iptperformancetrans

14 күн бұрын

@@derorem no, don’t get the wrong idea- They start out as used Valve bodies. Cars need to come off the road after X amount of miles in China. Some of the cars are (probably illegally) parted out rather than scrapped. I had a customer in Taiwan explain the whole thing to me ⚙️

Is there a recommended source for real valve body’s (rebuilt or aftermarket)?

@iptperformancetrans

Ай бұрын

No such thing as a complete aftermarket valve body and used ones are sometimes tough to find, it pretty much legwork and sometimes eBay has the right stuff but it’s a crapshoot

Their broken English is awful.