Thanks for that. Had same problem. Your video was great.

Thanks a lot, simple and clear, way better than those fancy lengthy ones.

@BARR8323

2 жыл бұрын

Glad it helped

Thanks for showing us what to look out for, signs of impending doom!

Great info thanks

@BARR8323

4 жыл бұрын

I learned the hard way and paid to learn, the most I can do is share the information. Thanks for the feedback.

My floor was uneven and adjusted one of the legs and the top it's level now but I think the damage was already done, it still bangs during spin cycle. On medium or heavy loads the banging is very loud but on a light or an empty load there is no banging. Maybe mine has a different issue, like the shock absorbers. I have a hard time diagnosing the problem since there is no banging at all on a light even load. I've read that if the balance was the issue, it would also be out of balance on an empty load.

That sound, my washer was moved into a mobile home, and it shakes all 70 feet of frame. Recently moved into a house, and just like the place before, it shakes and hops. I installed the dryer on top of the washer, still hops. I found after transport the shock absorber on the left rear came apart during transit. This time it won't stop jumping, so like you said, the bearing has light freeplay, but not enough to make it that out of balance. L{ks like I need that spider yolk assy.

@BARR8323

3 жыл бұрын

Yep but it’s expensive, considering the age of the machine and a tech to fix it plus parts cost (my spyder) would have cost $150 if I recalled correctly. I just ended up buys new one.

Make sure to throw some bricks in them before getting it hauled away for a replacement.

@jackman2865

Жыл бұрын

Good point with a sledgehammer

Hoping this turns out to be our solution too. A lot cheaper than buying a new one.

@BARR8323

3 жыл бұрын

I ended up buying a new one because the part was back order for 3 weeks and at the time I am dealing with 3 toddlers.

Hey my washing my washing machine loosing drum and noise start to Tatatata when it's spinning what should I do

Hi there, a few days go we noticed that the drum was making a terribly loud squeaky noise when we manually turned the drum clockwise or anti clockwise and later found out that the drum in certain areas was rubbing against the front door rubber seal. The technician who just rotate the drum with his hand to diagnose the issue said that the drum , the door rubber seal and suspensions would need to be changed and I wasn't convinced . So I wanted to check if my washer has a broken spider as well. I can share some videos of my washer if that helps . Thanks !

@BARR8323

Жыл бұрын

Hi I am not an appliance technician, just a diy guy that likes to fix stuff myself.

@richardj8853

Жыл бұрын

@@BARR8323 then u really are highly talented , I must say !

@BARR8323

Жыл бұрын

Thank you, I ended up not fixing it because the part was back ordered for 2 months. With 3 toddlers the house Boss was not going without a machine.

@richardj8853

Жыл бұрын

@@BARR8323 😄😄 so u went in for a brand new washing machine , did you ?

@BARR8323

Жыл бұрын

Yes and unfortunately the same brand, way less features since it was clearance sale and Miss matching colors. Also spoke to House Boss not to over load it otherwise we will move to hand washing in the bath tub at least she will have AC and not be outside in the heat. I had to explain how overload is extremely inefficient and does not get it clean. It’s better to do 2 small loads. The debate still continues when I see the entire machine shaking on the spin cycle 😂.

My washer has the same problem. Can I use it until it stops working?

How did you fix it though? I have the same thing. My drum is banging against my forward tub and I replaced the tub because it was so bad, but whats the fix?

@BARR8323

3 жыл бұрын

Your Spider is probably Cracked/broken I think it’s about $150, your drum might have cut the tub, and or rubber lining. My spider was cracked and tub was cut. I was going fix the tub with an epoxy cement and replace the spider, but parts take a week and wife had to do laundry because of 3 toddlers, so I bought another one. It’s still disassembled in my garage. I was thinking of fixing it because it’s a way better than the one I bought. My fix would have cost ~$200 in material only. One of my videos show the spider arm cracked.

@fowadkhan5938

3 жыл бұрын

@@BARR8323 i had the same situation i took it apart and selling its part which will be worth enough buying a new one.

This is my washing machine right now 😢😢

This didnt show how to take everything off to see why it makes that loud wobbly noise while spinning

Thank you so much for sharing!This is exactly what's happening to my machine right now. I got an estimate and it was close to $700.I know I cannot do this type of repair.That's kind of steep I feel I'll be better off buying a new washer.Do you agree Or should I get another estimate.

@BARR8323

2 жыл бұрын

Late reply, I ended up buying a new one since the parts was back ordered.

@jimmytate7587

Жыл бұрын

you are correct that the cost is between 600 and 700 and even if you have it repaired another arm will probably fail in 5 to 7 years. the front tub is also likely to fail as in this washer and my own washer. the spider is made of a cast metal, probably a zinc compound and electrolysis is what is causing this problem. it exists on samsung, lg, whirlpool kenmore and several other front loaders. i will avoid front loaders in the future.

How much cost to repair this problem

Sir hamare mashin me esahi sound ata he

Spyder assembly ? Video would be worth to watch if shows what/where this spyder assembly is, not to take apart, etc

@BARR8323

3 жыл бұрын

The spyder assembly is located behind the drum it what’s supporting the drum. It’s at the end of the video.

My concern is that it will wobble so much and go loose and destroy my machine one day.

@Lucasbird47

Жыл бұрын

turns out it was my floor that was unevan

@juicybrucie365

Жыл бұрын

My spider arm let go one night, thought a car crashed into my house, simply replaced my spider arm and am up and running again.

Im washinge machine technician from bangluru I want job in your country