Excellent unboxing demo, you went straight to the goods without useless banter that so many woodworking KZreadrs do.

@wallytrinc9885

2 ай бұрын

Thanks for watching ! I appreciate your comment 🙏 .

Hi Wally. Just bought this table saw, very useful to see where all the bits go when not in use, easier than the instructions.

@wallytrinc9885

5 ай бұрын

It's a great table saw , I highly recommend upgrading the blade to 40 teeth , regards - Wally

Thanks for the informative video Wally!

@wallytrinc9885

6 ай бұрын

My pleasure ,,,,thanks for watching 🙏

Good job. It would be great to see the precision of flatness of the table.

Thank you for this good unboxing and review.

@wallytrinc9885

Жыл бұрын

Thank you so much , I'm glad you enjoyed it 🙏

Thank you Wally!!! Great demo

@wallytrinc9885

Ай бұрын

Thanks mate , glad you like it 🙏

Excellent job. I am going to buy this very saw.

@wallytrinc9885

10 ай бұрын

Yup ! you can't go wrong , Dewalt usually have a promo with this unit , once a year or so,,,,,, I would upgrade the saw blade though , if you want really fine cuts , good luck .

Thanks for a great demonstration.

@wallytrinc9885

7 ай бұрын

Thanks so much ! &. thank you for watching 🙏

thanks for the anti-kickback pawls notice. i was looking for mine and thought they forgot to include it because on the website it says it's included in the box

@wallytrinc9885

10 ай бұрын

I guess they supply the anti-kickback on the bigger model DWE7491-XE .... still, I'm more than happy with mine , how about you ?

@m3scalin3

10 ай бұрын

@@wallytrinc9885 Its not possible to upgrade saw with those pawls by any chance?

@wallytrinc9885

10 ай бұрын

@@m3scalin3 I'm not sure...on viewing a recent video...it looked like the pawls sit behind the riving knife allocated slot ,,,maybe by upgrading the riving knife an after market pawl will fit ??

I love it. I want one. I'll have to figure out how.

@wallytrinc9885

3 ай бұрын

As they say ..where there's a will there's a way 👍

Great review first look, as far as i can remember the flip portion on the fence should flip over the other way towards the blade to enable the blade guard to stay in place, and dewalt nailed it with the fence system im sure you will enjoy your new saw.

@wallytrinc9885

Жыл бұрын

Thanks sandman2651 , I plan to give the table saw a good working over this weekend , with future plans on building it a portable table bench.

@glowpipe

Жыл бұрын

It got two notches. The bottom notch is for support like he showed in the video and the other is to use as a small fence that go under the bladeguard like you say

Hi Wally,I'm looking at getting this saw. You have had it now a few months since making your video. How is the saw working out for you? What are you're overall thoughts on this saw? Great video. All the best from Germany.

@wallytrinc9885

10 ай бұрын

G'day mate , Overall I'm very happy with this saw , so much so that I no longer use my makita drop saw (with the use of the sliding sled).....I have never used the blade/guard assembly ''personal preference'' it does not come with a anti kick/back guard ! I have not experienced any kick/back thus far ! ,,,,,the bevel gauge is OK , but has a little bit of side/ways movement- 1mm movement either way is a lot if you wish to achieve accurate 45degree length cuts,,, so I will be making a 45degree sliding sled,,, again I can't really fault this saw ,,,the safety features on the on/off switch are fantastic,,, the saw blade is so-so,,,, an upgrade blade is a easy fix,,, hope this helps you my friend .

@alangordon4563

10 ай бұрын

@wallytrinc9885 Yes thanks. With that information this will be my next saw. Have to sell my old one first. Thanks for the quick reply. Have a nice day and stay safe.

I wish mine was so fit as yours. I bought exactly the same one and it has a lot of small issues (I was expecting much more from such a company)

@wallytrinc9885

3 ай бұрын

I'm sorry to hear that my friend ..... may I ask what issues are causing you grief ?

@leonardokalinci9894

3 ай бұрын

@@wallytrinc9885 yeah sure, first the yellow cover for the saw was crooked and floppy,the fence is not in 90 degrees with the table (this is not possible to adjust) the table top is not dead flat and when I fix the blade to be 90 degrees on the left side it is not 90 on the square on the right side… I’m a bit disappointed coz its not a cheap saw and I was expecting it to be solid. Anyway enjoy yours and always be careful 🙂

@wallytrinc9885

3 ай бұрын

@@leonardokalinci9894 There are many issues you have found ! if you still have your purchase receipt is it still possible for exchange/refund ? .... Regards Wally

@leonardokalinci9894

3 ай бұрын

@@wallytrinc9885 I bought it 3 years ago and it has been sent it many time to be repaired but every time I discovered new flaw. I think I just got unlucky with mine( sometimes I wish I bought a different company) Best regards 👍🏼

Hello, do you know if there is any difference between the model "DWE7485" and "DWE7485WS"? It's just a WS but I don't know what it means, it could be "With Stand" or something like that?

@wallytrinc9885

3 ай бұрын

Correct it's ''with stand '' some retail/hardware stores will sometimes offer a special bundle price , during mid year stock take sales !

Harganya sungguh menakjubkan

@wallytrinc9885

Жыл бұрын

benar ya, di video saya selanjutnya saya akan membuat papan seluncur dari kayu agar persilangan lebih mudah /aman , terima kasih

Will it fit a dado stack?

@JoBo-ug6tf

7 ай бұрын

According to DeWalt? No, you'd have to step up to the 10". But, I've read that other people have done it (and I ordered a set of box blades). No matter what you are limited to the total thickness of the blades - there's a couple of metal protrusions (near the vacuum port) and the you'll have to order or make a custom throat plate. HTH!

Thank god for a non american imperial measurement review!

Where did you buy it?

@wallytrinc9885

11 ай бұрын

Bunnings.com.au

Just bought this saw really happy with it. A good saw worth buying

@wallytrinc9885

9 ай бұрын

Good man Daniel 👍