This is comedically accurate if you’ve ever worked on any of their 2000’s V8, V10 engines. Nothing disassembled easily and is even harder to re-assemble because you’ve forgotten where and how components go back together after it took you a week to disassemble it, a month for parts to arrive, and then a week in meditation to motivate yourself to work on it again.

@nicksdinosforkids6001

Жыл бұрын

Lol!

@MangoKai

Жыл бұрын

Accurate lol

@zap265

Жыл бұрын

i thought it was just me that stewed like that

@brianallen9810

Жыл бұрын

I really think these are "Disposable" cars. For what they cost I would think they would be more serviceable.

@zap265

Жыл бұрын

@@brianallen9810 kinda weird- i have 180k on my car now. its not rusty and it drives fine. if it was a 82 ford anything it would have been at the junkyard years ago. what do you think makes them disposable?

You say you read comments so I wanted to let you know things i absolutely LOVE about your channel. No stupid music, no loud stupid intro graphics, no fake excited yelling about boring stuff, no shilling for VPN or gaming companies I'll NEVER touch, and no shilling for hello fresh (not fresh). I love the way you do what you do and I hope as you grow it's without the previously mentioned annoyances. I don't know what I like, but I KNOW what I hate. Also, just subbed.

@rayzor285

Жыл бұрын

And no thumbnails making stupid faces.

@BaseSRKI

Жыл бұрын

+1 I really appreciate the down to earth and calmness of it all with a flake of sarcasm and rhyming😃

@davidtappe5337

Жыл бұрын

Me too

@jacksonsmith8251

Жыл бұрын

I’m glad someone said it

@formidable38

Жыл бұрын

Definitely as above!! Love this channel.

I love the constant "oh no", "that's not good", "that's not supposed to go there" 😂

@shaantitus1538

9 ай бұрын

My favorite was ,"I can't tell, something is ungood in here."

@ovidiurusu4490

7 ай бұрын

Look at the design of the engine.. french cam make better engines, that's not even a fleet engine and they use patines all over that's an engine that will fail sooner or later.

@loschwahn723

3 ай бұрын

@@ovidiurusu4490 just like the renault diesel which sticking in those a and b from daimler ? real great engines, mister piston headache - such like i those known from the 1990's

Bang went my interest in any V8/V10 Audi! I swore off Audis after the parts cost on an Audi 4000 Quattro back in the late 80s/early 90s. Any hankering left is now gone! Superb video -- thx!

@A-FrameWedge

25 күн бұрын

I remember going to Chick Iverson Porsche/Audi in Newport Beach around 1987 and looking at an Audi Quattro. I couldn’t believe the price tag on it, not too far from a 911. To me it looked so cheap with so much plastic bodywork.

Man, the complexity of these engines is just nuts. No wonder repairs cost a lot.

@TestECull

Жыл бұрын

That complexity is why I will never buy one. I like my old school 1940s-1980s US iron instead. Nice and simple.

@harrywalker5836

Жыл бұрын

if you pussy foot these engines, direct injection, they fk up. need to use fuel cleaner as well. idi still better.plus if it has butterflies in the inlet, which it will, like bmw ect. take them out,they destroy engines.

@Heartbeat1991

Жыл бұрын

It’s really not that bad.

@lancecooper4646

Жыл бұрын

@@TestECull well LS swaps are extremely popular cos of ridiculous engines just like THIS

@TestECull

Жыл бұрын

@@lancecooper4646 And how many LS's have we seen Eric tear down by now that've had catastrophic internal failures due to overcomplication that doesn't serve any practical benefit? Go older. Carburetted. 350 4-bolt with a massaged Q-Jet and a 268 cam will make roughly the same power with 0.0005% the complexity. And a better sound. And better reliability. And 99.99999% less randomly chucked rods.

The valve train explosion was just what I needed today. It was right out of my play book. Well played.

@deansapp4635

Жыл бұрын

Correct, These video s never get old

@young11984

Жыл бұрын

I was sitting here thinking...he took all the bolts out of the cam caps, must not have a lot of pressure on th....hahaha oh shit what a mess🤣

@calyodelphi124

Жыл бұрын

Yeah that one made me bust out laughing. xD

@BennHerr

Жыл бұрын

Also known as a RUD. Rapid Unplanned Disassembly.

@zburnham

Жыл бұрын

I agree with this statement.

I love the sound the air impact makes when it's sped up, it sounds like a blaster from some kind of sci fi movie.

@mystisith3984

2 ай бұрын

🔫 Pew Pew ! Cracks me up every time too. It's the little things in life.

It's so weird. I work at Audi and nobody ever mentioned anything to me about the BXA. Water-cooled alternator? That is definitely a FIRST for me. You are teaching me things, and I love every bit of it, good or bad.

@Veikra

9 ай бұрын

the BSM is an higher output in the S8. That what I have.

@corythomas4427

6 ай бұрын

Some R8 5.0L V10 had a water cooled alternator. I think the Passat 4.0L W8 may have had one. 4.2L Touareg's had them. BMW V8's are fairly common for having them as well.

@ftffighter

5 ай бұрын

My 2005.5 B7 Audi S4 4.2L with the Automatic had a water cooled alternator. Beefy sucker. @@corythomas4427

@chandlerthompson665

4 ай бұрын

I actually just picked up a 2003 bmw 540i and it has a water cooled alternator too 😂

@fernando13e

4 ай бұрын

BAR 4.2 engines also have water cooled Hitachi alternators

I sold VW/Audi's when these came out. First, what an amazing engine when you give it some right pedal! Second, what a maintenance and service nightmare. You most definitely do not want to service this thing out of warranty. What I always was amazed at is when it came to relatively expensive vehicles like this, how hard it was to get people to service/maintain them. Even with free maintenance we had to call and hound owners to bring their vehicles in. Audi had (I can't remember exactly now since it's been many years) either 15,000km or 20,000km oil change intervals, in North America where people do not check their oil ever. On a high output performance engine. Ummm, yeah. You are correct, almost everything WAS engine out. The service department had motor trays/jigs for lack of a better term - tech would put the car up on the lift, raise engine tray/jig to engine and/or transmission and disconnect everything and just lower it down. They could do it pretty quick on all models since engine out was the norm for most things. Was common to go into the Audi shop of 6 bays and see 4 vehicles engine out. Crazy. And that uber complicated timing system with the A/C running off of it. Just imagine the shock to the system every time that cycled on. The noise this thing must have made as it blew up surely echo'd off buildings for blocks. So, what did I learn after working for Audi/VW for years? Never ever own one of these things out of warranty.

@robertmason8341

Жыл бұрын

You got that right, about outta warranty ownership. It’d cost a small fortune to go thru the timing system and replace everything. Typically why people off them right before or soon after off warranty. Let someone else deal with the inevitable. Now on the flip side, to someone like me who has the facilities and capabilities to work on them, they have their place and can often be picked up cheap enough in very nice condition with the presumption of going thru and fixing/replacing alot of high dollar stuff right of the bat as preventative maintenance. That is when the price is sooo right you just basically budget that into what your not spending on buying the car itself.

@gldgti

Жыл бұрын

regarding the a/c - they use a continuously variable displacement unit that doesnt switch on and off. Even Golfs (mk5 and newer) have this.

@billyjoejimbob56

Жыл бұрын

@@robertmason8341 Complexity of this design makes the average BMW engine look simple! This could be the poster child for German engineering run amok. Also explains how the resale value of German luxury / performance models sinks so low as they age. The third or fourth owner thinks they are getting a deal on a great ride. Then they learn how expensive it is to maintain correctly. Sooner or later something breaks and the engine has to come out to fix it. Now they know why a used Camry cost twice what their same-year used Audi cost!!!

@alskooper3319

Жыл бұрын

@@billyjoejimbob56 If you got one of those cars for free plus $10,000 cash, you’ll be in the hole in one year.

@billyjoejimbob56

Жыл бұрын

@@alskooper3319 Guaranteed money pit!

Damn that timing system looks like a steampunk convention.

@lizkrinsky5209

Жыл бұрын

Indeed!

@alb12345672

Жыл бұрын

@@lizkrinsky5209 The 97-10 Ford Explorer had a german Cologne SOHC engine that had rear chains.

@KRRZ350

Жыл бұрын

@@alb12345672 And no timing marks to make it easier to work on,lol

@alb12345672

Жыл бұрын

@@KRRZ350 Just guesstimate :lol:

@SurelyYewJest

Жыл бұрын

Ya, hay-soos. I do notice though that while he criticizes Mazda's MZR 4s for having a single-row timing chain, this V10 has several of those, and it's driving 6 more cylinders putting out 2X more power.

As an industrial electrician, I found out that if a panel won't come off when you remove the bolts, replace the bolts even if loosely. Because the next panel is trapping the first panel. Which is eager to jump into the buss bar and the nearest ground

@233kosta

Ай бұрын

That failure mode does not sound desirable either 😅

I'm more appalled at the design of the engine than I am at the damage done to it

@GTOGregory

Жыл бұрын

Overhead cam engines are always so complex with lots of potential breaking points.

@ejkk9513

Жыл бұрын

It's honestly not that complex. I'm very familiar with them. The actual internals of most Audi engines are very strong. The components around the engine... not so much. The 4.2 v8 engine in the RS4, for example, has a closed-deck block with a ton of reinforcements, forged pistons, forged connecting rods, and a forged crankshaft. It can handle an incredible amount of abuse. This V10 is also very tough. I'm not sure how this one met its end, but most likely, it wasn't maintained properly. My Audi engine has over 120k miles on it, and the internals look brand new. There's not a single stain or varnish on anything. I've had a ton of issues with everything surrounding it, but not the engine itself.

@ftffighter

Жыл бұрын

@@ejkk9513 I used to own a 2005.5 Audi S4 with the 6-Speed Auto and loved that 4.2L V8. First thing I did after buying it, was swap out those junk plastic timing chain guides for the metal RS4 guides/tensioners. I ran it from 98k miles to 127k miles with zero issues, until one day it was 15 degrees below zero and the coolant reservoir broke in two spots pretty much draining the engine of coolant... had to get her towed somewhere and she got stolen :/ Yea, it sucks. Smoothest engine I have ever felt, the V10 is probably even better!

@ejkk9513

Жыл бұрын

@ftffighter The coolant reservoir in all Audi and Volkswagen cars are designed to fail. I have replaced them on every single car that is over 10 years old. Like I said, internals are strong. Everything surrounding it is crap. Purposely so. I've driven a Lamborghini Gallardo with the 5.2L V10, and it sounds lovely. It's actually not that smooth because it's a V10. This design is inherently prone to vibration. It has problems with primary balance, and it has an uneven firing order. A V10 has to have a V angle of 72 degrees to have an even firing order, and this V10 has a 90-degree angle without a split crank journal. Audi uses a balance shaft to counter the balance issues though. The Lexus LFA is the best balanced V10 ever made. The 72-degree angle used is perfect. I love the sound of most V10 engines, but on an engineering level, they have some serious challenges.

@ftffighter

Жыл бұрын

@@ejkk9513 Yea, I definitely figured that out the hard way. Breaking at both ends of the reservoir at once was pretty bizarre. The cooling systems rely on plastic couplings, not metal, in order to "Expand" properly under heavy loads. The worst part is, if you do end up using metal on one piece, it'll just add more pressure to the other plastic places. Which means you ideally have to replace all the joints with metal or you're stuck with using plastic still. Not to mention, aftermarket isn't the greatest so if you used metal you'd have to manufacture the parts yourself. Not sure if that would cause anymore failure points do to improper expansion of the system too. So, you're kind of stuck with plastic. The plastic does seem to work well as long as it's maintained properly and the pieces are all checked ahead of time for cracks and failure points due to long-term wear and tear however, so it's not like it wasn't engineered well. The design is fairly solid and kind of cool when you dig into it, but you are right though... the plastic is designed to fail long term. Don't get me wrong, you CAN bulletproof these engines/cars in the end. It just depends on how much you umm... "Love your car" per say XD.

This was probably one of THE BEST teardowns I've seen on this channel yet. Just based on the complexity of this Audi engine and the sheer and utter carnage inside the block was a sight to see. And yes, the valve train "explosion" was epic!!! This channel keeps getting better and better. Well done and keep the carnage coming my friend.

@6Sparx9

Жыл бұрын

Yep, enjoyed this one almost as much as the Miata teardowns

Poured myself a LARGE, boozy eggnog drink to celebrate the holidays, lit a fire, and settled in for 57+ minutes of the most entertaining thing on the web - you did not disappoint. Thank you!

@lizkrinsky5209

Жыл бұрын

Yep. I'm crocheting Christmas gifts while I watch along with some custard nog... sip, double crochet, glad I'm a Toyota girl, chain 3, single crochet, yikes, that made some noise, sip, chain three... holy schnikey what a mess... piston McCrumbs. Yep... Toyotas and Hondas for me... never had less than 248,000 on any of them and they still ran like tops when I got rid of them... and always do my services and regular oil changes. A weekly reminder on why wee do those things... or deal with malice in the palace.

I've been binge watching these... Normally I see a video that's 45-60 minutes, and I think "who has time for that?" I will watch 3 or 4 of these in a row... no problem. Also, I just realized something during this video... no swearing... not even a "beeped" cuss word. Sometimes it can be funny, but in your video's it's refreshing. I've never laughed so hard while learning. Keep up the great work.

Someone on a SRT forum tried to convince me that Audi engines are very simple and easy to work on. I almost died laughing so hard !

That was an impressive teardown! This engine is another monument to unrepairability. I wonder why they aren't welded together on the assembly line. At least we would know the truth. I don't recall that you've ever torn down a W8 or a W12. They are even more complicated throw-away engines than the V10. Thanks for my weekly fix. You have a great channel. It never gets old.

@geeniusatwrok

Жыл бұрын

Hoooboy I almost bought a B5.5 Passat W8 new. Glad I set my sights lower and ended up with the 1.8T, but that W8 6-speed was a blast to drive.

@miljororforsprakpartiet290

Жыл бұрын

@@geeniusatwrok w8's probably amazing until time for the belts...

@handsolo6241

Жыл бұрын

2 kinds of audi/Volkswagen cars, broken, or losing value so fast they aren't worth fixing.

@mazevx2451

Жыл бұрын

Believe it or not, these engines get repaired over here, they are to expensive to replace, so the vehicles get often scrapped and engines repaired to second hand owners

I honestly think I get more excited for these videos to come out than any other youtuber I watch. I love this channel, I see you hitting a million subs sooner than later.

the completely disintegrated piston coming into view was almost like a horror movie. The sheer amount of carnage! It's rather mind blowing to imagine the forces involved here to turn forged steel parts into confetti...

@Veikra

9 ай бұрын

That`s 450 horsepower at play. Well a little less since its a s6 not s8 engine but still a LOT of power

@Inanabananana

9 ай бұрын

@@Veikrasome quick math given the stroke and 7000rpm redline of this engine reveals that the pistons are experiencing 20,263m/s2 of acceleration, or 2067Gs. Say the piston weighs 0.25kg (around half a pound). At 7000rpm that same piston has the effective force of 516kg (1,137lbs). That’s if it broke on a non-ignition stroke. If it broke during an ignition, then as you said, you have 435hp on top of that half ton of force.

@coliimusic

8 ай бұрын

Somebody sent it for sure😂😂

The sheer amount of engineering gone into this is deeply insane. With the EV changeover in full swing I can't see too many newcomers willing to learn all this. Thanks hugely for such great information presented so nicely, could watch such stuff all day.

@HenrySomeone

10 ай бұрын

Yeah, the people who will still have such (unnecessarily) complex engines in "historic" cars a couple decades into the future are going to be paying absolute fortunes for servicing...

@paulstubbs7678

10 ай бұрын

All the crazy engineering for what - no help in passing upcoming emissions targets.

@coliimusic

8 ай бұрын

​​@@HenrySomeoneMeh, I mean that's somewhat true but not really. Service costs will go up, yes, but ICE cars worldwide won't be considered "historics" in such a short timeline, eventually EVs are going to reach a steady market equilibrium with ICE cars and by that time the benefits of EV transport on such a scale would likely have significantly cut emissions in an optimistic scenario, so why litigate away the remaining ICE cars or expect them to be so cost prohibitive (compared to any car) to own?

@HenrySomeone

8 ай бұрын

@@coliimusic I wasn't talking about ICE engines in general, but specific, high-end and very complex ones like this V10.

@kevinheuvel7454

6 ай бұрын

take a look at the older large piston engines before the jet turbine engine replaced them in aircraft

The more of these videos that I watch the more I appreciate the engineering in an old Chevy 350!

@charliep4680

Жыл бұрын

More like lack there of

@xtremeboost7

Жыл бұрын

@@charliep4680Exactly, less crap to break.

@lancecooper4646

Жыл бұрын

OR an LS 🔥😛

@charliep4680

Жыл бұрын

@@xtremeboost7 Also much less efficient. Lets not pretend like every sbc is a 500hp street machine when they came with 250 on a good day from the factory

@gdaytrees4728

Жыл бұрын

@@charliep4680 i have old magazines that have articles showing just how good the small block Chevy v8 is: brake specific fuel consumption figures of 0.38. Very few modern engines can achieve this. Diesel engines can deliver better numbers (lower, down to 0.30), but high oxides of nitrogen pollution is the result. Not so with the highly efficient small block Chevy.

I know you spent a whole lot more than 57 minutes making this video but well I sure enjoyed the 57 minutes of watching it, thank you

This failure would've been one heck of an event to witness. Super interesting disassembly with great commentary. Great channel. I'm hooked :)

@shaantitus1538

9 ай бұрын

Looks like it literally detonated. High energy failure indeed.

Highly entertaining teardown, thanks. I've seen far worse "shrapnel" and Involuntary Self-Disassembly Products in my days working for a race engine company. Including an F1 piston that let go at 18000rpm, after which no piece of it was larger than a pea. Usually I was in the design office, but visited the engine build / rebuild workshops regularly. On one memorable occasion, an 800hp 3.8litre V12 had broken a rod at 12,000rpm, destroying the cylinder bore and breaking the block. It was bleeding fluids on a build stand, awaiting teardown. As I took a closer look, some education expert was giving her opinion on the radio: "The word "failure" must be banned!" she adamantly insisted. "There is no failure, there is only 'delayed success'." Ignoring what she was trying to say (about avoiding being negative regarding any child's future development, and encouraging them to keep trying instead, except she had not clarified that context), I looked at the guys at their workbenches and said, "In that case, I look forward to this engine's delayed success..." Seeing the (relatively minor!) devastation of this engine reminded me of that moment when an engine failure became an engine's delayed success.

@dominic9028

6 ай бұрын

Best passive aggressive comment ever

I really appreciate that when my 5 year old wants to watch I don't have to worry about what you will be saying. Thank for the great content!

@loschwahn723

3 ай бұрын

what a moron which try to moralize otherones ? nothing knew in the east ?

I can't speak for all subscribers but because you are probably the only person I know that would go to the trouble to verify the burnt Miata engine runs is why we are subscribers.

@chrisdover9421

Жыл бұрын

Yup. I agree

"Whatever it was, it's a T30 now!" Love it! OMG, 21:13 is the detonation-mark! One screwdriver, one small poke...SPROING! I actually LoL'd IRL at that.

You attacked that stuck bolt in the socket exactly as I would have. Thumbs up!!!

It always blows my mind to see how complex these VAG engines get. Makes the LS look all the more genius every time you pull these crazy things apart

@SurelyYewJest

Жыл бұрын

Ya, if we Americans do complex engine stuff that requires engine-out and/or transmission-off it's usually to cut corners and graft new tech onto old engines.

@davelowets

Жыл бұрын

"Vag" engine is RIGHT...

@ramenbo

Жыл бұрын

3 cheers for pushrods

@davelowets

Жыл бұрын

@@ramenbo 🍻 for cheers...

@peterjohn3180

Жыл бұрын

Imagine you had to work on one of these in a vehicle! Awful

I’m a heavy duty diesel tech and I’ve seen so much carnage on big diesels from blocks with windows to broken cranks and everything in between. I just found your channel you’ve got a new sub. Kinda wish I filmed some of the stuff I’ve seen.

@unseenpresence

6 ай бұрын

If people really had any idea what mechanically speaking was rolling down the road with 40+ tons behind it, they would drive more carefully and give trucks more space.

It’s amazing the engineering that goes into some of these engines. Some of the castings that you find are intricate. I’ll stick with the push rod engine.

@petrnemecek4379

7 ай бұрын

They should have saved rocket engineering for rockets. It is unnecessary complicated.

This is a great channel. I didn't even know I wanted to watch an engine teardown, but here I am on number 3 in a row. You keep it interesting and funny, both with your comments and your edits, and you don't have any of the super annoying crap you see on most channels. Keep up the great work. Subbed and shared.

That rube-goldberg timing system was hilarious.

@robertnewman2508

Ай бұрын

Thought the exact same thin😎

It took longer than I'd like to admit to realize the timing chains were on the rear of the Audi engines when I first saw the pictures online. I think part of it was disbelief that a modern-ish design could be that terrible.

@tobiaskarlsson9094

Жыл бұрын

Timingchains on the Mercedes 220CDI engines are at the back too It is not that uncommon, why in that world they do it like that is a mystery thou..

@ferrumignis

Жыл бұрын

BMW also put timing chains on the back end on some of their engines. The N47 diesel (used on numerous different models) is infamous for chewing up timing chains and destroying the engine at quite low miles, even if you caught it in time it is a big job to repair with multiple chains at the back.

@GodiHateOtakus

Жыл бұрын

Ford's 4.0

@dylananderson4421

Жыл бұрын

@@GodiHateOtakus Ford's SOHC 4.0 was an effort to modernize a pushrod engine and convert it to an overhead cam engine. So there's a jackshaft where the cam used to be, connecting the front half of the timing chain setup to the back. Maybe so the cylinder heads are still the same side-to-side? Idk. Terrible design, terrible idea. Also, based on the Cologne v6. A German engine. Lol

@devintariel3769

Жыл бұрын

My dad sold his to a tweak when his s4s chains went...tweak assembled a sort of chain and pulley system in the apartment parking lot and had the chains replaced on his own through the night.

You had me at the first "Oh oh!". The complexity of the engine and engineering involved is pretty amazing. Never knew they water cooled the alternator. What I'm trying to imagine is the sound of the engine tearing itself apart. Assuming, as you said, it was a high RPM failure, that V10 instantly became a V8 metal grinding machine. Eight cylinders still firing with good plugs turning the crank and beating the out of the one that failed. Wonder how long it kept running. Thanks for a most enjoyable tear-down. Take care.

I replaced the A/C compressor with the engine still in the car in my 2007 Audi S8 which uses this same engine. I assume it has marginally more space than the S6 does to work but it was still a bear to do. Front bumper has to come off along with the condenser and the radiator along with the thermostat. Once there, you have to remove the driver's side engine mount and then you can work the shaft driven compressor out. I did this in the driveway and took the whole damn day but saved me tons of money.

Wow! I'm not much for the German varietals, but this is a rare treat indeed! Decently reliable for what it is, and I am a huge fan of the concept of stratified fuel injection. The only issue, of course, is dealing with the carbon buildup that is a problem on all direct injected engines (a problem with a solution that I love: simply add another set of injectors in the ports). From the moment I saw the mechanical re-gapping and the amount of buildup in the ports and on the plugs, I suspected a typical third-owner 'run it until it breaks' mindset. Green coolant, worm gear hose clamps, and varnish buildup tell me that it wasn't professionally maintained, which means that there is a decent reason that the S6 loses 75% of its value after just ten years. German complexity and a lack of reliable aftermarket, coupled with not a lot of shared parts with their 'lower' offerings means that these engines are destined either for destruction or overly-expensive maintenance. The number of times I've heard something along the lines of "just because I drive an Audi doesn't mean I have Audi money" on a five-year plus old model is both heartbreaking and infuriating. So, I tell people the prices and have them yell at me, then go about my merry day selling VVT solenoids for GM LAF/LEA 2.4s. Thank you for a HIGHLY entertaining teardown and commentary! Engine Requests: Ford: 300 Inline Six, Windsor, FE, 1.0 EcoBoost, 1.4 EcoBoost, 5.2 Voodoo, 6.7 PowerStroke General Motors: 3100/3400/3800 Olds, LUW/LWE 1.8l i4, L5P Duramax Chrysler: Slant Six, MORE HEMIS, 1.4L FIRE, AMC 4.0/4.2, 3.3/3.8, 318/360 Honda: B Series, D Series, K Series Toyota: 1GZ-FE, 1ZZ or 2ZZ Subaru: FJ series, EZ30/36 Old School Unicorns: GM 702 Twin-Six, Oldsmobile 5.7 Diesel, LT5 Lotus (C4 ZR1) Modern Unicorns: Toyota 1LR-GUE, Chevrolet Gemini, 7.3 Godzilla

@joshmanis9860

Жыл бұрын

GM ecotecs we’re partially designed by Germans

@chubbysumo2230

Жыл бұрын

Toyota did add injectors to the ports along with their direct injection. works well.

@FishFind3000

Жыл бұрын

The biggest thing is people don’t realize that just because the car was 20k to buy used doesn’t mean the parts are gonna be for a 20k car. There still priced at the new 80k price.

@68pishta68

Жыл бұрын

Slant six would be boring..its about 30 pieces and none will be bad.

@utuber478

Жыл бұрын

VAG has used dual injection on their European market cars for quite a while, likely even before Toyota. Obviously with US market being skewed towards lower price point, all we've got here was flashy big rims. Priorities;)

Easily the most entertaining/satisfying teardown you’ve done so far. The rapid pace and transition from suspense to comedy was worthy of the best Warner Brothers cartoons. The quick progression to ever-larger BFHs (6:50) was Bugs vs. Yosemite Sam level great. Chuck Jones would be proud! The Jack-in-the-box cam gear surprise (21:14) was also a high point. The final camera shake from scattering engine parts hitting the tripod (21:19) was a deft comedic touch. Now when people ask me what “double overhead cams” means I can just show them this clip.

@katous

Жыл бұрын

with cam cradle/plate explosions like this, unexpectedly, is why we wear eye protection and/or face shields kids 😂

Very cool to watch this tear down. Thank you for taking the time to video all this engine pron.

Your tear-downs are great! I’m repeatedly amazed at the overkill built into engines like this one. Fully convinced, as if I need any more convincing, that I won’t ever have an Audi, VW, British Leyland, or many other brands. Great video! Thanks!!

This is hands down the best teardown video I watched on KZread. I have to wonder if this was a "money shift" that overrevved it enough to cause this kind of wreckage. But the amount of sludge and varnish in the oil pan suggest lots of deferred maintenance as well.

@kyleshehadi4119

6 ай бұрын

How does one money shift an auto

@mustafamohammad1821

5 ай бұрын

@@kyleshehadi4119drop it down 4 gears lol

Really makes you appreciate the LS's simplicity compared to this. Opening the timing cover looked like looking inside a Rolex watch...

@krispykruzer

Жыл бұрын

I had the same thought, absolutely ridiculous

@MrKotBonifacy

Жыл бұрын

Nah, judging by that "This $25,000 Rolex Explorer Was Exposed to Seawater" video (kzread.info/dash/bejne/qpWnz5WAdq-dnbA.html) the innards of Rolex are somewhat neater ;-)

@Angelo80907

Жыл бұрын

Indeed a work of art. Also as a mechanic once you learn how to work on these engines how to do the timing it’s like opening a new level of knowledge in your brain. Really sets you apart from other mechanics.

@MrKotBonifacy

Жыл бұрын

@@Angelo80907 _Indeed a work of art_ - yes, but then there's this German ironic saying "warum einfach wenn's auch kompliziert geht", or "why make [it] simple when you can make it complicated"... ;-)

@Angelo80907

Жыл бұрын

@@MrKotBonifacy 🤣 damn show offs

Great teardown. Can't imagine the bang this spontaneous disassembly would have been, would make a great ringtone.

@paulstubbs7678

10 ай бұрын

I wonder if the owner realized this was a gonna, and just kept going as there was nothing to lose. I remember a lady pulling up to a country service station, and asking for help, it made a big bang and was running very rough. Inspection found a rod hanging out of the block. Advice to the lady, yeah try and drive home, nothing to loose, your going to need a new engine.

I've watch three V10 teardowns in a row, the magnum 8.0L, the Viper V10, and this one. And I've noticed a common theme, they eat pistons regularly.

The timing chains on the back (and a lot of the rest of the design) make a lot more sense if you consider this engine in the R8. In a mid engine car, the front will be against the firewall and the back will be more open, usually they have a small access panel in the car's interior to have access to service belts. Audi taking this and slapping it in a sedan equals service nightmares/engine-out for everything, I'm sure the fancier and more expensive sports car is actually a lot easier to work on, ironically.

@callishandy8133

Жыл бұрын

First = The owner of these cars in germany have an better level of money ... Secound = The car mechanic for these performnce Audi / Lamorghini are skilled (plus 3 years standart car mechanic school . Every german car mechanic passed these 3 years car mechanic school 2 days a week and 3 day at the car garage) . BUT a car mechanic for these AUDI is adittional trained some days/week at a special AUDI school to service + repair these performance car. Third = I think the Audi (and no name garage) know that is is normal to build the engine out of the ... Even if he spend one day for these work plus one day to fit it under the engine compartment. For difficult work it is easy and he can do a better work. Remember the owner is person with higher incoming and is able (and will) pay a lot of money. The owner know these. These is a performance engine in an performance car for sales man. He will use the abillity to drive unimited speed level at these parts at the german Autobahn with no speed limit. And the owner is able to pay the premium 98 ROZ (normal he drive to shell with 100 ROZ or ARAL petrol station with 102 ROZ). The highest prize petrol is good enough for him. I think in US you can not get these quality petrol. In germany you can get these at ervery petrol stations and at Shell or ARAL petrol station these top level petrol. By the way thise is not a special raceing petrol. The owner is able to drive with these car 200 mph at german Autobahn. A lot of owner say = well 155 mph is enough for me. An Audi R8 V10 is a sport car. These engine you find in a bigger size Audi RS6. You drive with you wife and family shopping. Enough space for the shopping and the children. And use these car for your daily long distance was to your customer as a premium sales man for big companys. Service nightmare for the car mechanic = yes The owner know the amount of money and can afford it. The Audi garage know these and say ok we will sell these service nightmare. We have a skilled trained car mechanic with addition AUDI school training. If you are not a trained AUDI mechanic leave your fingers away. If you are not a Space ship mechanic you leave normally you fingers out of an space ship aswell. If you are only able to service a american V8 well and ok. No problem for me. By the way I never ever but my fingers in these Audi V10 or Mercedes perfomance engines (or BMW performance) because I dont like these engines. But if my boss send me to these special traing schools for these performance cars ... Well then I really like to work with these engines. My boss will buy all the nice tools for that car. Enough working place and enough time to work. And a computer with direct access to the car manufacturer plus telephone hotline to constuction engineers. Only fighter jets and Space crafts mechanics are better .... These car mechanic are toplevel trained ... If a low budget garage or an unskilled garage owner is the boss of the car mechanic ... well When I am a owner of a Audi V10 engine and I go to a Yugo garage ... 🙃

@johnfloyd2551

Жыл бұрын

@@callishandy8133 well stated.

@RBA46spd30

Жыл бұрын

In 2003 Audi came out with the B6 S4 4.2l and I believe that engine was the first to have the timing chains in the back. I read that they did this because of packaging issues. This looks to be about the same setup. It's unfortunate they had to go this route because the 4.2l timing belt motor I read is supposedly a boom proof motor. I bought a S4 with a 4.2l in it. It had a new engine form Audi installed. The bill was over 30k for that new engine and install.

@nasme100

Жыл бұрын

I don't believe that is correct. IIRC the Lambo and the R8 have the engine flipped backwards in the car so that the transmission sits in between the seats. This means that in the car, the timing chains are still up against the firewall.

@RichM3000

Жыл бұрын

​@@callishandy8133 Our (US) 93 octane fuel is 98 RON. That's about the highest octane we generally see at a mass-market gas station. Most states carry that, though some states sell 91 octane as their premium fuel.

25:54 the rest of these pistons look really happy, look at their little faces! 😊

@mridaho7871

Жыл бұрын

They look happy, except the one on the end that had it’s face busted into pieces.

That was, by far, the best dohc extraction EVER...! Thanks, keep up your awesomeness and go enjoy some nature today...!

Love your channel and remarks!! Entertaining and informative. Thank you for your hard (and dirty) work

Emailed the sales people about the recent LT-1 teardown and got a great price and quick reply but remembered where I live at the moment and that shipping would be more expensive than what the engine costs. When I make it back to Tennessee, I'll be doing some business with your company

A lot of praise need to be given the engine block here. The amount of destruction coming from the one pulverize piston and rod would normally escaped out of most engine blocks but this one kept everything inside.

Best teardown yet, Eric !!! Loved it. Thanks. James.

Yeh, these german overengineered engines are some pieces of...well too much overcomplexity.. But those dipstick fights are epic, man! Keep 'em coming! :)

If someone had told me that I was going to spend almost an ENTIRE Sunday watching a discount Adam Sandler tear apart some really trashed engines and make dad jokes, I probably would have laughed. BUT, that is exactly what I did. These videos are like eyeball crack, I can't stop watching them. I'm not a big car guy at all, so I'm actually learning a lot from watching you tear these catastrophes down. It's very informative and the sound of breaking those bolts loose is like audio heroin (why am I making so many drug jokes?). I can't get enough of it. You are extremely knowledgeable, but you also aren't afraid to admit, "I don't know what I'm doing." To be honest, I usually don't watch videos that are longer than 25-30 minutes because I'm lazy (and at 50 years old, my attention span seems to be diminishing), but I click on yours without ever checking the run time because they're so interesting and enjoyable. I'm hooked and look forward to working my way back through your video catalog. Well done!

I am so glad that you upload videos of these expensive engines cause I have learned from your videos to simply walk away from buying any of these european brands of cars & suv's. Your videos always help me keep my feet on the ground whenever buying a new vehicle cause I know what brands to walk away from.

@markhoward9355

Жыл бұрын

My 2021 Chevy Silverado 5.3 engine lasted 11,000 miles. Lifter failures and bent pushrods, Just saying. My Audi has 110,000 miles and purrs. Every major company has built a cluncker or two.

@alribee

Жыл бұрын

@@markhoward9355 My 2004 Silverado pushing 200k . Not bad for a $400 truck, but it is getting ugly.

@markhoward9355

Жыл бұрын

@@alribee For sure, I love hearing of high mileage, long lasting trucks. Don't think the "rules" of yesteryear apply anymore. European vehicles are thought unreliable because they are overly complicated and computer controls. American vehicles are unreliable because they are built so freakin cheaply.

Hey I can see why your videos are so popular I feel my mind really relax watching you take apart these amazing engines and you are so skilled at it bravo As an old comedian once said “ I love hard work I could watch it all day “ This video is 10 out of 5 stars 🌟🌟🌟🌟🌟🌟🌟🌟🌟🌟 My best wishes always from Las Vegas Craig ✌️🥰💡

I really like disassembly videos, but mostly love the fast-forward impact with the laser gun sounds.

@TokeyTheBear

9 ай бұрын

Pew Pew Pew Pew Pewpewpewpewpewpew Pew Pew Lol!

I have to say this was a great teardown. Thanks Eric. Id love to see the 4.2 sometime.

I think this was the best teardown I've seen on this channel yet! It definitely confirmed my feeling that I will try to NEVER mess with any of these ridiculous Audi engines, and the humor quotient was high. "Something is UNgood in there" had me laughing.

You have skills and good humor and we enjoy when you drag out BIG BLUE. Your facility pictures are impressive, that is a big brick structure you got brother. Thank you for sharing what you do to the world. May you have many years more sharing and selling car/truck stuff.

Absolutely incredible- the engineering is amazing - the engineer that put this together had to be in the diesel industry- crazy motor!!

The complexity of this engine is just amazing to see.

@quicksilver462

Жыл бұрын

Thats what it take to run 170 mph all day on the Autobahn.

@amazoidal

Жыл бұрын

For how long?

@bigblockjalopy

Жыл бұрын

@@quicksilver462 do you live in Germany?

Ah, the bolts stuck in the socket. If they haven't snapped off, I usually thread them back in the hole to get some leverage to pry the socket off. If they do snap off, I throw them down at at concrete surface. That usually pops them out after a toss or three. I also had to do that to liberate a tophat from a loaded Macpherson strut once; that was an adventure.

As a mechanic & someone that has made various contraptions over the years ,it grieves me to see the lack of respect & gratitude some owners have for their machinery , the amount of work & effort it took to create that thing & someone can't even keep the oil clean , I reckon we should form some sort of justice for machines club & go around & bash up people who mistreat their engines !!

@user-yg2vw8cc8c

4 ай бұрын

I agree dude but unfortunately that would be over half of the population of the world!!!!!so many people buy these beautifully engineered vehicles and only take them to a garage when the break!! And not for servicing, I have been a mechanic 4 30 years and it still amazes me how badly people treat there vehicles and call them pieces of shit when they break down!!!! When they never have any maintenance done to them CRAZY

Good job bro,keep it nice and simple,very nice way to get em all lined up without having "Special Tools " !!!!!!!!!

Thank you for the video. Obviously, the Rube Goldberg force is strong amongst Audi engineers.

@robertmason8341

Жыл бұрын

All German car engineers belong to the church of Rube Goldberg. I’ve always wondered is the needless complexity an engineer’s “flex” or is it an attempt to keep all the labor money with the dealers. Pull the engine or pull the trans to work on it in the car…and that would still suck all up under a lift and the transmission tunnel exhaust etc obscuring your view/access. WTF, I can’t think of a single good reason to put the timing chains on the back side of the engine unless it’s got to do with Quattros and engine mounting would be crazy forward/hood length suspension. Probably just answered my own question 🤦‍♂️🤣

@JamesSterling

Жыл бұрын

Rube Goldberg came immediately to mind as he tore into this monstrosity. German engineering at its finest. Why keep it simple when it can be designed overly complicated to show how smart the engineers are?

That is one overly complicated engine with probably double the failure points and 5 times the cost of a standard LS engine. It looks like it was over revved and sent a piston into the head. While the broken rod hammered everything! You are getting damn good infront of the camera. Keep up the good work!

@alro2434

Жыл бұрын

I think the rod broke. If the piston came apart first, that wrist pin would've been flailing around and had much more damage to it.

@hiteck007

Жыл бұрын

@@alro2434 It could be too given the condition of the wrist pin, your right. That means the rod bolts let go looking at the condition of the rod & what's left of the bolts & after that the crank schreaded the parts in the destruction. I thought it was piston failure but thinking about it that could still be the case though looking at the rubbish design of them. The piston in my vehicle that failed had a design like these, no whole piston, just a half piston with skirts, well it was the skirt that broke off on mine which very nearly had the piston turn sideways in the bore, thankfully that didn't happen & only bore scoring happened. a rebore & new aftermarket pistons (whole ones) and she's still driving around 27 years later. Anyway there's a couple of theories.

@toto29620

Жыл бұрын

I thought that too but it was fitted to an auto gearbox so it should no be able to be over reved, i am rooting for a rod failure given how skinny they are.

@keyss78

2 ай бұрын

Rocker arm failure. They designed them with too small roller bearings that eventually fall out… carnage ensues.

New to the channel and dig it. As a tech, I enjoy getting "helpful hints" on the new ways automotive engineers show their love for the average technician... Lol Useful tip, spray a little PUB-BLASTER or WD40 in the socket before you get into really rusty or greasy areas. And don't beat up the defenseless socket. It was just doing it's job, a job YOU put it in, btw!! Jus messin with ya, but use the tip, it works. Have a pleasant day!

awesome teardown, enjoyed all the 57 mins. thanks buddy

You, so casually and off-handedly, mentioned removing the dipstick tube. And, of course, the struggle ensued. Eric, Eric, Eric, have you learned nothing about dipstick tubes?? LOL!

That is by far the most devastated motor Ive ever seen that could still be turned over manually with no problem.😁

@azerogliev6520

Жыл бұрын

xaxol eto peremoga?🐽🤣

That was a volcano explosion, I loved the way you played it back, Awesome

I can't get enough of your teardowns. The hammers, almost spit my beer out. Cheers

I have been waiting a long time for this engine to be on the channel! Thank you!

The sound when this let go must have been epic. Thanks for the vid. As ever, really enjoyed it

@logobot

Жыл бұрын

I can attest the V8 4.2L variant is the best sounding V8 I’ve ever driven. It’s as if an American small block with anger issues went to college in Germany. They’re insanely good until they have any problems 😂

@rabidbigdog

Жыл бұрын

Given those engines make ~500hp at ~8,000rpm the detonation might have been immense!

My wife can always tell when I am watching one of your great movies. Its my laughing. Your description of broken parts is so funny. Thank you.

So satisfying to watch these engine autopsies. Gives me a great appreciation for the sophisticated and complex engineering and manufacturing. Seems like they ought to cost 3 times what they do cost. This also makes me appreciate the two relatively simple electric motors that provide my Tesla with a silent and instantaneous 670 hp.

Damn that engine must a nightmare to work on. More plumbing than a small city. I love the simplicity of a SBC

Eric you’re a better man than I. So many words would have said at 21:31 when that cam plate flew off!

@jdfmfb03

Жыл бұрын

Don’t worry I said them for him😂

@jfan4reva

Жыл бұрын

Remember, he has small children....

Love watching him rip engines to bits and its educational 😊

Pretty, pretty cool this videos. We can learn very much about this engines, with this disassemblies. Thank you very much.

17:23 when that timing system was shown, F THAT, definition of overly complex.

That camshaft bit at 21:15 needs to be included in your end of the year highlights/blooper reel.

@onefastboi14

Жыл бұрын

I died of laughter when it exploded like that. Was absolutely hilarious

You do good. I have a short attention span of usually 3 minutes or less. But I spend almost an hour watching your channel each time. Always something new. And I have retired from having to fix anything. Including lunch, where's the drive threw?

Nice relaxing video to sit down on a rainy Sunday afternoon with your wife..absolutely amazing

I really enjoyed this one. Thanks for the effort you put into making these videos:)

I had one of those in a $500 s8. A transmission position sensor replacement was to much to keep it alive so I sold it for $500 after almost 2 years of ripping it. I see several other parts could had caused similar decisions. That car was a blast but to low to actually drive in snow.

Love your videos. Very interesting, informative and comical.

i said i would love to see higher hp performance or modified engines and you delivered.

Oh damn! I had a bad day at work, but when that cam retainer blew off… I laughed my ass off! Thanks! 😁👍🏼

Lieutenant Colombo of engine dissection. Top work sir. Thanks from Australia.

@loschwahn723

3 ай бұрын

as a knowlege: italian design joke _" get out of my way tells the rocker through the KRANK from mussolini air engeneering "_

🤣🤣🤣 When the cams exploded out. That's the engine nightmares are made of. No way I would ever want to fix one of those. Great video!

Thank you for your time into making these videos. This one was exceptionally hilarious and interesting. Suggestion: you should keep the surviving wrist pins that go through the piston McNuggetfication process from each tear down to sell as channel merch.

I've said this on each of the last few videos, but they really do just keep getting better and better. I bet all that over-engineered complexity seems great until it explodes into massive carnage.

Excellent video Eric!

Someone's sitting at home or work watching this video and it finally dawns on them, "So that's what happened to my motor". Nice videos.

That was a decent blow up, for sure... That had to make some serious noise... Love the channel, keep up the Great work...

There’s a guy in India that can work miracles on that engine block, he might can even straighten out that bent rod.

@TwentytenS4B8

Жыл бұрын

With Ramen Noodles.

@stellingbanjodude

Жыл бұрын

@@TwentytenS4B8 no doubt

Id like to tell you how much ive learned from your videos. Each one ive watched has been great. Its almost like i was there doing it. Especially the 8.0 dodge V10. I happened to be tearing one down just like it, and it was ruined. Got another ready to go back in.

That cam cover/cam/etc. flying off was hilarious!!

I love how at 6:50 you just kept getting a bigger hammer after each failed attempt to get the bolt out.