my heart just died from the inside hearing "This is a Boeing A380"

@goregalore_

5 жыл бұрын

Same im dead imsid if you have the time for this you have the time to pull up a380 then u will see airbus a380 in the airbus livery

@capt_sanschagrin4717

4 жыл бұрын

Also, he called the elevators "wings". So, the A380 has 4 wings

@pakowsky2656

4 жыл бұрын

Airbus 747 and cessna A320

@marcusboykin4429

2 жыл бұрын

yeah when i first heard him say being a380 I paused the video and went back to make sure I heard it right!

@marcusboykin4429

2 жыл бұрын

i meant Boeing

"Boeing A380" I feel that was purposely said to piss off the aviation community.

@kalharman8303

3 жыл бұрын

Also agree

Ah, a Boeing A380, that's what that is. I hope he makes an NAA P-26, or maybe a Cessna P-51d, or my favorite, the Lockheed-Martin F/A-18. I do kinda want to see a McDonnell Douglas Spitfire, or even a Supermarine P-47d Razorback, possibly an even an Airbus KC-135.

I love the Boeing A380 but it’s nothing like the airbus 747 No actually it’s all about the Lockheed Martin su27

@shotgun18

3 жыл бұрын

Ah yes the lockheed martin su27

@shotgun18

3 жыл бұрын

And the mig 22 falcon ;) Very nice plane

@srthebox4946

3 жыл бұрын

Sukhoi f 22

@knorseasoning

3 жыл бұрын

Boeing a350

@landocommando8

2 жыл бұрын

Mig 737 fighting warthog

B O E I N G A 3 8 0 rip my heart.

Boeing A380 is one of my favorite planes, along with the Cessna 727 and Piper UH1

@trijetz3562

4 жыл бұрын

I thought the UH-1 was made by Beechcraft, the more you know.

@JohnRobertson22

4 жыл бұрын

Carter, Yea, hardcore cringe

@joeymiguel9615

4 жыл бұрын

Haha

@danielsendthis4824

3 жыл бұрын

ahh yes,aviation knoledge....

@Enzi_Meteori_902

3 жыл бұрын

no the airbus made the a380

Boeing A380, no comment.

@FlyXsim

8 жыл бұрын

of cores my favourite plane is the Cessna 777 lol

@leviovervadpedersen

8 жыл бұрын

ikr big fail

@FlyXsim

8 жыл бұрын

***** yes, a lot.

@anononomous

8 жыл бұрын

+Fly X In the spirit of transatlantic cooperation :)

@FlyXsim

8 жыл бұрын

That made me laugh a little to much. XD

"It's a Boeing A380" ... ... ... -Throws everything off of desk in a fit of anger-

Nah you're all wrong it's Mcdonnell Douglas MD-12!😂

The start is a insult to all avgeeks.

@Mo-sv4hv

8 жыл бұрын

True...

@arslankhan2134

8 жыл бұрын

+D-MMA yes because he got the name wrong and no I will not get over it....

@UCBANDIT009

8 жыл бұрын

+D-MMA Shut up WWE.

@johnreynolds3126

8 жыл бұрын

+MB PLAYS So true.

@nickjeffrey8050

8 жыл бұрын

hahaha insult because he got the name wrong lol wow your a silly boy if a simple mistake like that gets you so salty

Boeing A380 must be a new plane...

@LeMecNoir

8 жыл бұрын

Ooh my favorite plane is the Cessna c-5 and f-35

@BunnySk8rProductions

8 жыл бұрын

+JamesCalMar i have a c150 made by cessna, that means its better than a herc

@iseukanda

8 жыл бұрын

Airbus should start to sue Boeing😁

@LeMecNoir

8 жыл бұрын

+BunnySk8rProductions lel

@sonik487

8 жыл бұрын

+viperipods Lol same thing I said !!!

Jacky's "snap together" designs are amazing.

Where i can get the STL files?

You printed a Boeing A380 model kit? Nice. I wonder if you can also print a Cessna C-130 and a Lockheed Concorde.

@BurningTaco7101

8 жыл бұрын

I want an Audi 747.

@koencarloskemp130

8 жыл бұрын

+DawnsAngau bruh you need an opel 320

@TherealracerGaming

7 жыл бұрын

ugctkit i want a bugatti 737

@Suproxus

2 жыл бұрын

I need an embraer dc 6 a

that "double dovetail" key actually has a name.... its called a butterfly joint and is used in woodworking to join planks edge to edge.

@Animuldok

8 жыл бұрын

***** Dutchman... yes, that name was eluding me. Thanks for commenting :D

You can tell Jacky is annoyed at this dude because he keeps interrupting and snatching things out of his hands.

@Zuesacoatl

8 жыл бұрын

+SpaceNavy90 It annoys me to watch it, I would hate to be Jacky lol

@TsarBeardless

8 жыл бұрын

+SpaceNavy90 That's very common in this channel, very annoying.

What's the spec for the machine, nozzle size and step?

I have the same glasses frames as Jacky Wan. Also beautiful work on that time-lapse at 2:53

Hello, where can i find the STL file to print my own A380 please ?

I am really liking these vids that highlight design concepts for 3D printing. thanks!

Where can I find this I checked the links and no luck...

A+ on time lapsing the prints. That was fantastic. Cheers

Excellent video. Great explanation and good information throughout.

where can i download to make this! I want to print the a380

Hey guys, what happened to the form 2 review. just wondering, thanks.

After years, is it already online 3D model for this one?

Where can we get this to print?

¿Can you share the STL file of this Airbus A380 please?

Amazing design as always.

Can i download this??

where can we get the STL file ?

Nice. Also the black levels and everything looks better now.

Therapist: Boeing a380 isnt real, it can't Hurt you. Boeing a380: 0:55

What software was that made in?

Can i download the stl files?

how did you design this

I just got an ad on the Glowforge 3d laser printer, you know the thing they showed on tested four months ago. Kind of cool.

good nightclub where can I get this file of the A380 I can't find it I would really like to print one of these can someone help me? 

This is an Airbus, not a Boeing, Boeing always has their liners start with a 7.

Jacky truly is the 3D printing wizard.

What Software Was It built In?

“Boeing A380” #triggerd

hi tested. love the shows but am curious to when the other episodes of adams martian suit will be uploaded? id love to see how the project ia going

nice to see a video about how you have to design for the 3D printer. i have a 0.4mm nozzle (ooh matron!), so i know to make wall thicknesses in increments of 0.4 etc. he is so insightfull. Ultimaker bagged a great guy right there.

can you guys do an LS7 engine with moving parts?

@joelopez6525

8 жыл бұрын

Something mechanical 3-D printed would be a great thing to see.

@joscythe556

8 жыл бұрын

+Daryl Miller that would be sweet

@1blisslife

8 жыл бұрын

+Joe Lopez there's a 3D printed wind up clock here on KZread that's awesome & mechanical!

not sure if anyone is going to read this but can we please get Jacky Wan to make a high detail Steam Locomotive. Or does anyone know of good kits out there?? (talking the scale of that aeroplane, large flying scottsman or big boy sort of design, high detail)

pls share file to print A380 or other fleet /thx

Love the Last Starfighter shirt!!!! Can you please make a 3D printed Gunstar????

My sole left my body and went to hell when he said “Boeing A380”

I know people are trying to focus more and more on a higher printing resolution for the skin and smaller seams and what not, but there is still a sizeable community out there of putty-fillers and sand-polishers!!! Other than that, great 3D print. The best of the 3D printed planes I have seen yet! :)

Any content other than 3d + vr videos?

you guys need to bring back the guess what the 3d printer is building again it was fun to watch

What happened to the other video?

@tested

8 жыл бұрын

+Cyclops Eye fixing it so the details are clearer!

@Animuldok

8 жыл бұрын

+Tested here was a suggestion I tried to put on the other vid: It would also help to put the item on a lazy-susan stage that has a good ambient lighting and a less-diffuse, fixed "spot" light to bring out the detail while the item was rotated. Wouldn't cost a lot to build unless they wanted to get super-fancy with it and it would make for good motion video.

@arslankhan2134

8 жыл бұрын

+Tested airbus a380

@CyclopsEyes

8 жыл бұрын

+Tested Cool, nice to know. Keep doing what you're doing.

@SpeckyNation

8 жыл бұрын

+Animuldok They're not re-shooting. Just editing the existing footage...

Does it fly? Can you scale it up to be flyable?

@ZicajosProductions

7 жыл бұрын

If you get it to the scale of R/C flying, it would be more logical to use foam or a light wood instead of only plastic. :)

"Now on KZread's Vimeo we're building a Boeing A380" - "next a Ford Testarossa"

Airbus makes the A380, not Boeing. I'll just chock it up to him being nervous.

@L1ft0ff

8 жыл бұрын

yeah, these Boeing-Nerds are just jealous

@dragonbutt

8 жыл бұрын

+Der Micha Who'd be jealous of an aircraft that leaks water onto its occupants mid flight? ;3

@leonkernan

8 жыл бұрын

+Dragon Butt (ThatsNoMoon) As opposed to having a BBQ pit under your seat.

THAT GUY HAS SO MUCH STRUGLES W/ THAT PLANE! IM DIEING

My god I remember watching this 6 years ago.

"This is a boeing a380"..... Good bye all 😂😂😂😂

Recently a Boeing a380 landed in tarmac 38R while having an emergency because it hit a piper 747

amazing

Cool!

Smooth snatching Jackie's model out of his hands like he's a child.

wow his models are expensive, would have thought you could buy the files and print yourself

Now I need the second model of airbus 747

I like almost all the Tested content, But even more so when Sean is on, and like seeing Valcrow as a guest, you guys should team up to design something for us, and make a show out of it. Now that would be a great Tested segment to watch.

This will kill model companys.

Notch for joining the body sections should have been done in opposite orientations so he didn't have to fiddle with that little piece.

Boeing A380.... Ok m8. I will let you slide on this one. that little blinky light zaps the braincells out of everyone.

I died inside. "boeing A380" I have officially died.

They both speak with an upwards inflection at the end of their sentences. Now that i have told you that, you can not unhear it. :D

How does it glide? Toss it out of a window!

Airbus A380, not boieng

@danielsendthis4824

3 жыл бұрын

u spelt it rong

@jojothefisho4199

3 жыл бұрын

@@danielsendthis4824 u spelt rwong wrong

i love the Boeing A380, and the new Airbus 787

My favorie plane is the cessna dash 8 q400

what is the point of this video, if you cant download/buy stl file?

I'd like to see what these guys could do with a CNC mill, they must get sick of plastic stuff!

look to to me is tharer a part 2 ? painted one and dacaled with an airline paint them be fun to do ;;;;;]]

great job! #nowarping

damn that boeing A380 is sick

can we get norm to do all of the interviewing?

I call my "cutter" shape a boolean saw.

As an aviation enthusiast I died when he called it a Boeing a380

I once flew on an airbus 747!

I love this Dassault Boeing A380 2000

Whats up with that water dropping sound

0:55 nice

Where is ATC Memes to verify this piece of journalism?

Hello darkness my old friend, I've come to talk (about Boeing A380 😭😭😭😭)

Boeing? A380? Thems are fightin' words.

Alright so all kidding of the Boeing/Airbus insult aside, where so i find this model? he says near the end of the video that it was not yet uploaded by the time this vid was made, has anyone seen it yet? i'd love to make one! big fan here! :P

Actually, it's a Airbus MD-12

Ah yes the mighty bOEinG A380

LOL BOEING A380

The Boeing quip shows the intelligence of these guys... Also step one: Make sure theres no licensing issues with what you're doing. Less you want to get sued by Airbus.

@907rc8

7 жыл бұрын

Dragon Butt blog it

Sean's hair has grown back ...

when i heared boeing a380 i was like : di.. did i hear my self correctly Boeing A380?! Its a Airbus not a boeing

Ahh yes my favorite plane is the embraer 777 and the airbus 737

Model: 1994 Airbus A380-800 (Programed In December 2000)

Bro said Boeing A380, cant dissagree. love the Cessna 767-400