Thank you for sharing! I recently discovered your channel as I am trying to start my own architecture channel. Your videos are very inspiring and it’s very encouraging to see good architecture series on KZread (it’s rare)!✨✨✨

@DavidTomic

2 жыл бұрын

Thank you for the kind words! All the best with your youtube journey :)

Great Video - thanks David!

@DavidTomic

Жыл бұрын

Most welcome! Great tools, very useful!

Thanks for the great video, just started a new job that requires learning how to use archicad and ci tools. This has been useful in updating my software knowledge.

@DavidTomic

Жыл бұрын

Glad I could help!

This is about 700x better than central innovations own video!

@DavidTomic

Жыл бұрын

That’s concerning coz mines free 🤣

The issue im currently having with CI tools covering is the roof edge type, im trying to change it from fascia to gutter but its not working . Since the wall is on boundary, the roof will drop between the gutter and fascia and the 450mm eaves gutter. in that drop its not allowing me to install a gutter as per normal practice. while in 4d roof covering i was able to do all that easily. im finding that 4d library is more user friendly even though its not as fancy. would you be able to demonstrate

awesome tips! any advice on splitting cladding and having different claddings above and below openings (like brick below window heads, weatherboard above)?

@DavidTomic

Жыл бұрын

There is actually a setting for exactly this when using the CI tools coverings.

Hi David i have a split roof, i was wondering how i trim the wall cladding so that it has a triangular peak, i cant find anything, i can see youve done it in the youtube thumbnail with the black building on the right? Thank you, love the content

@DavidTomic

6 ай бұрын

Try this one ArchiCAD 24: 15 Minute Roof Tutorial kzread.info/dash/bejne/iHmMj9yxpN24ZLg.html

hi thanks from the video tutorial i really like them.... does archicad 26 has as suiting cadimage

@DavidTomic

7 ай бұрын

im not entirely sure I understand your question, but yes 26 has cad image.

Hi David. Have you used wall coverings for internal purposes? E.g. tiling a bathroom? The issue I have is the one of my walls is often across multiple rooms e.g. exterior wall or internal bracing wall. It means that the cladding is then applied to those other rooms. I can adjust the cladding after but wondering if there is a better solution?

@DavidTomic

Жыл бұрын

There is a better solution but I haven't tested it out yet. ci tools makes a wall composite that can be adjusted vertically. Eg if you have only a skirting tile you can make it happen. Otherwise it's adjust the cladding / cut the walls to suit the rooms which is also painful.

@jamesrobertsonirvine

Жыл бұрын

@@DavidTomic Thanks for the response. Is the ci tools wall composite a separate tool or part of the coverings? Yeah, not ideal. Hopefully it's something CI consider going forward as AC is becoming quite popular with commercial & residential interior designers.

Hi David! When using composite walls with a cladding element, do you then delete this from the composite if adding a ci covering? Otherwise wouldn't it double up? Also, do you know if it is possible to actually get the brackets or battens for the wall covering to fix to? Have you had any success doing irregular stone cladding?

@DavidTomic

Жыл бұрын

Multiple questions in this one. Yes I delete the layer on the outside. No you cannot show the battens in 3D if that’s what you’re asking. I use the generic covering and then add a texture rather than making a shape specifically, just easier.

@sabrinachekaoui6921

Жыл бұрын

@@DavidTomic thank you so much for replying to all my questions! I love your channel btw!

Hi David, do you know how to put different materials on one wall, like on the bottom of the wall to be a different material and up to different material. Thank!!!

@DavidTomic

2 жыл бұрын

To the best of my knowledge this is currently not possible without an addon. CI TOOLS has one but I haven't tried it. Best way is to split the wall or create an additional wall infront. Not ideal.

@CiTools

Жыл бұрын

hi - you can do that, yes. there are options to display different claddings above and below the sill and head, as well as above and below the openings

Hi David! How can I make a table of roof elements and their length or area (roof covering, downpipe, gutter, flashings etc.) It's difficult to count it every time manualy. Greetings from Latvia!

@DavidTomic

Жыл бұрын

You can create a schedule, yes. Little bit complicated but it can definitely be done. I haven't made a video on scheduling items and areas but I'm sure there are some out there

Hello, thank you so much for this video was very helpful, can you pliz do a video on custom windows with cadimage pliz

@DavidTomic

8 ай бұрын

Multiple tutorials on the channel, I’m sure you’ll find what you’re looking for :)

👍🏻👍🏻👍🏻

@DavidTomic

2 жыл бұрын

Thanks!

My windows won't instantly cut through the wall covering.... Any thoughts?

@DavidTomic

Жыл бұрын

Glitch in archicad 24. You have to use an opening over the window as well

plz david i want ci tools plzz

@DavidTomic

Жыл бұрын

Just google mycadimage or citools. You'll find it :)

How to download CI tools for free?

@DavidTomic

2 жыл бұрын

It's not free. Therefore you can't

@CiTools

Жыл бұрын

if you want to try them out for free, you can get a 30-day trial on our website though