We are the only people own dell g3 2019

@odynzeyez6259

2 жыл бұрын

I have one as well I think. actually might be 2020 model. I love this laptop

@valentka6

Жыл бұрын

Actually.....

@mattb8754

11 ай бұрын

I have one

@Jozehkmz

8 ай бұрын

Still rocking mine since 2019

@davedara8006

8 ай бұрын

Same lol

This is how a "how to" is done. Thx

@rickstechrepairs

4 жыл бұрын

Thanks. I think why edit out anything, the difference is some videos are just for entertainment rather than education At least if something happens on a small step you can compare with mine

Dude you left a piece of towel under the heatsink, it's in the lower left screw of the cpu.

@ddogukanakcay

2 жыл бұрын

Kek. It dwells at 3:00.

Man why are you keeping the heatsink on the board ? It can damage the circuits or MOSFETs

“I’m here. Might as well swap it over.” Me: (putting the computer back together without thermal paste) “wat?”

@rickstechrepairs

3 жыл бұрын

oopsies

You just saved me like 10-15 dollars, thanks a lot :D

@rickstechrepairs

Ай бұрын

Glad I could help!

bro this help me so much thank you

@rickstechrepairs

2 жыл бұрын

Happy to help

Did I miss the part where you identified what those 2 surfaces were?

I have a del g3 2018 or 2017 edition same mechanics to applying the thermal paste ?

@rickstechrepairs

4 жыл бұрын

I believe it would be

just curious would you recommend an anti static bracelet for something like this?

@rickstechrepairs

4 жыл бұрын

Over 10 years of working on phones and PC's, IV never had anything die due to static

@albionjanitor7894

4 жыл бұрын

Ricks Tech first time I’ve worked on a pc 😂 took me a good while but improved temps by like 20 c

how are the results for turboboost mate did the paste lower it a couple of notches? It shouldn't be much noticeable with turbo off right?

@rickstechrepairs

3 жыл бұрын

No noticeable difference

By any chance did you reccord the stress (gaming!) temps before and after the paste? Would appreciate that info mate :) I Bougth this moddel a while aggo and I want to see how much I can push the GPU clocks.

@rickstechrepairs

4 жыл бұрын

no sorry dont have those test results i wouldnt expect any decent overclocking results, unless you Tame the CPU Temps first

@ernestog7979

4 жыл бұрын

@@rickstechrepairs nahhh I don`t hope to overcklock, mi gpu is a 1660ti Max Q supposedly runing at stock 1300 mhz, but I have already downlvolted -150mv stable and with the cpu limmited at at 2.5 gz My GPU is usually at 1520 ish (not bad) with 78 C, while gaming. I did notice the screen block`s the exhaust and that is just bad design, but, it was REALLY CHEAP MACHINE!!! (around $800 dollars :D), so i`m looking to further lower the temps, to see if maybe runing cooler it can reach 1600-1700 Mhz. I was planning to replace the paste, but to tell you the truth, I saw your video, and, it dosn`t seem DELL went cheap on there... so I`m looking on the internet to see if there are any gains, so far no luck :(

@rickstechrepairs

4 жыл бұрын

Yah the paste wasn't dry so wouldnt be shaving must much heat out of it Maybe a 2 or 3 fan laptop stand to squeeze a little more

@odynzeyez6259

2 жыл бұрын

​@@ernestog7979 800 dollars is super cheap? I spent 1500, I have the rtx 2060, i7, 16 gb ramm. it's a powerhouse but not cheap.

@ernestog7979

2 жыл бұрын

@@odynzeyez6259 it was a black friday discount :D by the way still running amazingly good, I made a special colling pad with a chinese power supply and some Omega 24 V 0.5 amp 24 i fans and installed bug mesh in between... runs soo cool. for gaming I lower the memory around 500 and the core speed goes up to stable 1.8 ghz. most games run better this way as the lower mem speed frees up power room for the gpu to go higher. and when not gaming?, it is mining eth with a porfit, and powering a 65 inch TV at the same time. dell makes good machines I must admit. Bottom line, make a cooling pad. if you want ideas I can send you my pad pics and specs for you to build it yourself :) By the way Im #1 in 3dmark with my processor/GPU last time I checked (i5 9300h with score of 5 548 ). so yes, I tested a lot this model ;)

How often do we need to change thermal paste in laptop? Once a year or two?

@rickstechrepairs

4 жыл бұрын

Probably only once a year

I replaced my thermal paste on my g3 and everything was fine, I monitored the temps for a bit and it wasn't raising at idle. I started playing a game and 10 minutes into it the computer shut off and haven't been able to start it ever since. Any suggestions on what to do? If it was a short wouldn't it not start up in the first place? Or if it overheated wouldn't it start up after the computer cooled off, or should be a blue screen saying it's overheating?

@rickstechrepairs

3 жыл бұрын

im not sure what has happened there sorry. if it was overheated it would have thermal throttled not shutdown

@ayomayo3814

3 жыл бұрын

@@rickstechrepairs yeah it's weird, and the thermal paste I used was non conductive. Thanks for your help though!

@odynzeyez6259

2 жыл бұрын

this is awful sorry to hear that man. I know what I paid for mine and I would literally cry if this happened hope you sorted it out friend.

Is it safe to use isopropyl alcohol or Windex to clean the paste, I'm worried the alcohol or Windex will damage the capacitors or resistors?

@labatomi

4 жыл бұрын

Ive done it plenty of time with alcohol. Ive never tried windex and honestly dont recommend it because of its water content.

@odynzeyez6259

2 жыл бұрын

alcohol

@odynzeyez6259

2 жыл бұрын

def not Windex.

@odynzeyez6259

2 жыл бұрын

oh NVM someone answered and it was 2yo. lol

Is it okay to apply thermal paste with battery not removed like you?

@rickstechrepairs

3 жыл бұрын

You can remove the battery but if you have the power off, I don't see why removing the battery will really matter

Screw number seven is stuck, what should I do?

Friend, could you inform what is the thickness of thermal pads that DELL uses in this notebook model?

@rickstechrepairs

2 жыл бұрын

No sorry, no longer have this laptop

@Gaz..

Жыл бұрын

Did you manage to find the answer? I need to change them this week and I still can't get the info.

What kind of thermal pads required for 3579? Is it 0.5 or 1.0 or thicker?

@rickstechrepairs

Жыл бұрын

not sure sorry

Are the GPU and the CPU removable? Just like in desktops?

@rickstechrepairs

3 жыл бұрын

nope

@fendo1604

3 жыл бұрын

@@rickstechrepairs sad... Thanks for the info!

What is the max temp you're getting now on gaming dude? You know what is the max temp before your TP replacing? My friend just bought this laptop and i wanna know if is worthy to change TP

@rickstechrepairs

4 жыл бұрын

didnt really change temps much at all

@CynicalDuty

3 жыл бұрын

@@rickstechrepairs interesting. so essentially it is a waste of time?

@DevrimKaraca

3 жыл бұрын

@@CynicalDuty because of this is not cool thermal paste video subscribe my channel and learn true way of thermal paste spreading truely.

@toasterforsale5069

3 жыл бұрын

@@CynicalDuty 1 month late but he literally mentioned that his laptop is like 1 month old and showed that the stock thermal paste was still pretty well applied so he only changed it for the video content. Just like with desktops if you stuck with the stock thermal paste with the cooler you should replace it with quality thermal paste that will last around 3-4 years after several months of use (or when you notice temps keep increasing compared to before)

How much thermal paste you put on to it?, with 1 g its enough?

@rickstechrepairs

3 жыл бұрын

enough paste :)

What is the thickness of the thermal gaskets (0.5mm, 1mm, 1.5mm)?

@rickstechrepairs

3 жыл бұрын

Don't have the machine to measure sorry

@andrewpetrov8372

3 жыл бұрын

@@rickstechrepairs при следующей разборке, измерьте, пожалуйста 😊

@andrewpetrov8372

3 жыл бұрын

Их тоже надо менять!

Sloppy work, but helpful :) Thank you

@rickstechrepairs

Ай бұрын

gets the job done

Thanks! Coming from a rapper as a change ;D

@rickstechrepairs

3 жыл бұрын

your welcome

¿Does anyone know the actual thickness of the Thermal Pads corresponding to this model?

@rickstechrepairs

Жыл бұрын

No idea

Somehow when i openned mine, the heatsink was kind of wet. It have like a kind of grease in the surface of both pipes of the square chip (left one in the video). Does anyone has had de same surprise? I think im going to call Dell Support because its really weird for me.

@rickstechrepairs

3 жыл бұрын

there is thermal paste.. .. but im thinking maybe the heatpipe has split

@ricardovladimirortegaramir5612

3 жыл бұрын

@@rickstechrepairs You are right! It was Thermal Paste :)

I just realized i dont have any thermal paste! 🗿is it safe to just stick it back in with all the dried ones that i just popped out?

@rickstechrepairs

3 жыл бұрын

Not overly safe, but the CPU and GPU will thermal throttle when they get too hot

@normalman1181

3 жыл бұрын

@@rickstechrepairs it was at this moment i realized......

Will this void the warranty?

@rickstechrepairs

3 жыл бұрын

it shouldnt (in australia it wont)

Hollow bro .For how much it supports ssd M.2 RAM 3000

@rickstechrepairs

3 жыл бұрын

ark.intel.com/content/www/us/en/ark/products/191075/intel-core-i5-9300h-processor-8m-cache-up-to-4-10-ghz.html 9300H supports up to 2666mhz (anything faster i dont think would net any improvement, Focus on Lower CL) m.2 NVME, i would suspect it would support almost anything out there

Should be use liquid metal?

@rickstechrepairs

4 жыл бұрын

Could but not sure how much lower the temps could be made

@kalfu5194

3 жыл бұрын

they go down by quite a lot or at least when you're really pushing the laptop it take a considerable amount of time to reach like 85 to 90 degrees

how to change cpu if possible?

@rickstechrepairs

7 ай бұрын

Can't

Is there processor removable ?

@rickstechrepairs

3 жыл бұрын

negative

can i upgrade the cpu?

@rickstechrepairs

9 ай бұрын

Nope

Hey what thermal paste did you used here?

@rickstechrepairs

2 жыл бұрын

currently i use Artic silver 5

@SwiftBlade17

Жыл бұрын

@@rickstechrepairs is noctua h2 3.5g gram good?

Hi! after doing this my laptop wont turn on. No charging led no fan spin. The first time I tried to power it on I saw the charging port led blinking white, but only once it was too fast for me to see the pattern. Tried Taking out the Bios coin battery, disconnecting the main battery and holding power for a couple of minutes. I checked voltage from charger and from battery and both are good even plugged to laptop I do not see any voltage drops. Does any one has an advice of what I am doing wrong? now I ill just connect to the charger for a couple of hours that the battery was completely dead. Help! I am running out of ideas.

@rickstechrepairs

3 жыл бұрын

Hi. I would do the following Disconnect battery Remove CMOS battery Remove ram Plug in power See if it will give a post error (which should relate back to no memory installed) If it does produce an error, then the board is actually "thinking" I would also go through all the connections on the board around the cooler + remove the cooler to see if excess thermal paste has gone on the capacitors or the board

@edwardo230

3 жыл бұрын

@@rickstechrepairs Hi Rick thank you for the replay! Nothing seemed to work, so in a last attempt I disconnect everything, even the connectors I didn't touched, clean the paste, give a good air blow to all components, and connect them again repaste, take out bios Battery, unplugged main battery, drain any static charge by holding power button, plugged batteries and it showed life signs! After a couple of power on attempts (blinking keyboard) it started normally, to be honest I do not know what was it or if I was doing the Static purge wrong. But hope this will be useful for other people. Now with this and a -140mv undervolt it rarely throttles and temps are around 80C at max load. (previously 100c even with undervolt) and without undervolt around 90C (good 10 degrees less) and clock speeds are more stable rarely doping from 3.98Hz, while before they where everywhere from 3.2 Hz to 4.0Hz. Thanks Rick Tech!

@ayomayo3814

3 жыл бұрын

@@edwardo230 hey what connection did you disconnect? I'm having the same issue

@odynzeyez6259

2 жыл бұрын

​@@edwardo230 hey man just wanted to ask. did you mean you were getting 100°c before replacing the paste and now get 80°c? I'm wondering because I've had mine for over a year I've never seen temps go above 79°c and have never replaced anything on it. just wondering what makes mine different. mine may be a 2020 model so maybe that has something to do with it. I play AAA games at ultra settings all the time and have never really had an issue with temps but I fear I'll need to start worrying about this soon considering I've been gaming hard on it for like almost 2 years now.

@edwardo230

2 жыл бұрын

@@odynzeyez6259 hey, yeah maybe it was because of my hometown temperatures that can reach 35C. Also I think some updates and disabling some stuff helped, my temps rarely go to that temp again. I also updated to win 11, I haven't applied new thermo paste in over a year and temps seem fine. So I will disassemble it and clean it and maybe add new paste. The normal maintenance. But to be honest it seems really sketchy from dell laptop feels still hot but temps are way lower, but who knows they might be alright.

can you take the cpu out?

@rickstechrepairs

3 жыл бұрын

Nope

Hay does your dell g3 laptop still work? I got mine back in October 2019 and it stop working. After watching your teardown it looks like the thermal pads are bad if take a look at your v-ram you will notice and oil residue, clean this off ASAP and change thermal pads

@Gaz..

Жыл бұрын

I have one since November 2019, still fully functional, I am only about to change the thermal pads and the thermal paste in its mid-year maintenance but I cannot obtain the exact thickness of these pads. Do you have the measurements for this model?

Anyone know if i could remove the Nvidia gpu and just use the on board intel gpu?

@rickstechrepairs

Жыл бұрын

you could disable the nvidia chip within windows, wouldnt unsolder the GPU tho

@diveallz1044

Жыл бұрын

@@rickstechrepairs damn i figured as much...thanks

I have... SEVERAL questions

@rickstechrepairs

3 жыл бұрын

they are ?

I have this laptop or ATLEAST the following years model, and mine has never gone over 79°C not ever. I play AAA games 8 or so hours a day on ultra high settings and have never replaced the thermal paste...

@rickstechrepairs

2 жыл бұрын

nice :)

Can anyone do this 😳

Lol

I'm gonna buy a new laptop because this laptop sucks. It's getting too hot lagg and stuff blue screens. I don't trust it anymore. Windows installed like over 10 times. Don't buy it!!

@rickstechrepairs

4 жыл бұрын

Funny enough I sold mine then less than 8 hours later the buyer said he wanted to return it due to bad battery life.. So in short I will be done a video soon regarding tweaks to cool this cooker

@mNiosu

4 жыл бұрын

Have you undervolted? Most gaming laptops under 1000$ have temperature and throttle issues that undervolt resolves. Also changing the thermal paste with some quality one should help further.

@rickstechrepairs

4 жыл бұрын

Thermal paste has been replaced I did dable in a little bit of undervolting but I do see that as something the OEM manufacturer should be doing or shouldn't be a necessary on the end users part!

@ilynomad

10 ай бұрын

I agree, I've had this laptop for 4 years now and can confirm it's pretty fucking shit. Never buying Dell again.

just sayin

@rickstechrepairs

2 жыл бұрын

cool

How to destroy a pc