Wow, I also have Deeper Pro Plus and a bait boat. Was thinking how to make the boat work together. Your way gave me a great idea. I am waiting for a finished product and test video.

@DavevandeGruiter

4 жыл бұрын

Muhammad Babar Shafi nice that it give you an idea. I already test it and it works fine only my GPS is not working as it should. Maybe after placing the booster it will be better. Succes with your improvement of your boat.

@user-zw9wu9oc6k

2 жыл бұрын

@@DavevandeGruiter have you found a solution to the problem with the GPS signal?

@DavevandeGruiter

2 жыл бұрын

@@user-zw9wu9oc6k Yes problem solved after placing wifi booster.

below is info on how to use a router as a range extender

@DavevandeGruiter

4 жыл бұрын

Mark Spencer i also thought about that option. For me a bit to complicated i guess. What distance did you reach with that set up?

Toffe video! Ik lees in de comments dat je met het plaatsen van een wifi booster ook een beter gps signaal hebt gekregen? Hoe komt dat want het kleine blokje met. Gps op de printplaat van de deeper is de gps antenne toch? Mvg

Wondering if you done the battery upgrade on the deeper yet.

@DavevandeGruiter

2 жыл бұрын

I’ve tried but failed. When I connect the booster to the battery of the boat, the app of the deeper tells me that the deeper is out of water🤔

Hi, u can give the links where you bought spare parts for modification?? Please

@DavevandeGruiter

2 жыл бұрын

Hi try to find them everywhere but only on AliExpress I could find the right one. € 27,00 30％ Off | Edup 2.4Ghz 4W 802.11n/G/B Wifi Signaal Booster Signaal Versterker Wifi Repeater Draadloze Wifi Power booster Lange Afstand a.aliexpress.com/_vZmLNy

Is zo’n grote gat perse nodig of kan het ook met een kleinere gat aangezien enkel de oinnetjes te water moeten raken?

@DavevandeGruiter

3 жыл бұрын

Zolang de pinnetjes het water raken dan werkt het. Maar vanwege de druk vanaf onder heb ik gekozen voor een groter gat zodat de Deeper bij die opwaartse druk de boot in wordt gedrukt.Kans op lekkage is daardoor minder naar mijn idee.

assume that part of the boat is submerged when in water? only you have put it in the middle of the boat, any reason?

@DavevandeGruiter

11 ай бұрын

Hi Steve, thats correct. This part is under water. Only reason for that place is because i have the most room there ☺️

Hoe heb je het eigelijk zo goed waterdicht gekregen?

@DavevandeGruiter

4 жыл бұрын

eppo 1993 de ‘ring’ die ik van de bovenste helft van de Deeper heb gemaakt past bijna zonder speling in het gat. Ook heb ik hem gemonteerd en afgewerkt met een afdichting/lijmkit.

Waar gaat de min heen waar heb die op aangesloten ? Zie wel dat 2 de kabeltje

@DavevandeGruiter

3 жыл бұрын

Dat is de buitenmantel van de antennekabel. Die heb ik op de min/zwart van de batterij gesoldeerd

@mrgekko8264

3 жыл бұрын

Top thanks

you can use a standard wi fi router to boost signal

Hello. I have a question. I am thinking about integrating my deeper pro+ in Boatman actor gps. But actually when the Deeper is integrated it will start working all the time when the boat goes in the water, even if I don’t use the sonar at the moment. It means I will struggle with discharging/ charging issue all the time. How to solve this problem and avoid it? Thanks

@DavevandeGruiter

6 ай бұрын

Hello youre right. I also have that issue/problem. When my boat is out of the water, some water will drip from the boathull to the sensor and will activiste the sonar. So i always dry the sensor with a towel. I have install a wifi booster on the boat with a switch so im thinking to extend the red wire from the battery of the Deeper and connect this with the switch.

@todorvalchev5123

6 ай бұрын

What I plan to do is, similar. To have a power switch only for deeper power supply and it will charge it. The things is that, using the boat in the water will always start the deeper and have to charge it very often. I will put a converter from 7.4v to 5V(usb) for power up the sonar when is discharged. I was just thinking that someone have a solution for that :) What about if there is some find of cover the bottom part of the deeper and sensors contacting the water?

Waar heb jij deze precies opgesoldeert op de min waar op die printplaat ergens? M.v.g.

@DavevandeGruiter

3 ай бұрын

Hé Benjamin de min heb ik op de min van de accu gesoldeerd. Gr

What bait boat make is it please

@DavevandeGruiter

3 жыл бұрын

This is a Nanotec Pro

bonjour, vous dites souder la masse du câble au moins de la batterie,mais je suis entrain de faire le miens aussi,et au testeur l'antenne d'origine est déjà relié au moins de la batterie....🤔🤔 je comprends pas les deux câbles sont sur le moins🤔🤔 merci!!!

@DavevandeGruiter

Жыл бұрын

Hi if i translate your reaction i get a not readable message😅 can you please write your message in english please?

@TheWators

Жыл бұрын

@@DavevandeGruiter hello, you say solder the ground of the cable at least of the battery, but I am doing mine too, and to the tester the original antenna is already connected at least of the battery....🤔🤔 I don't understand the two cables are on the minus🤔🤔 thank you!!

@DavevandeGruiter

Жыл бұрын

@@TheWators Uhm ok so you think it is not necessary to do? I have done a bit of resource and this is what a engineer told me and it worked out and make sense to me to do so. Please let me know if it also work without

@TheWators

Жыл бұрын

@@DavevandeGruiter Hello, I don't think that is necessary. the center of the cable is normally positive, and the outside is negative. the center is the original negative...

Did you manage also with Wi-Fi booster? Without the booster which is the range?

@DavevandeGruiter

4 жыл бұрын

He Edgar, Without the booster the range is about 70 meter but with a bad GPS signal. I have now a range with the booster over the 200 meters and a good GPS signal.

@babarshafi

4 жыл бұрын

@@DavevandeGruiter Dear, which booster you used. Please share me a link. Thanks

@DavevandeGruiter

4 жыл бұрын

Muhammad Babar Shafi I used this booster: € 19,80 22％ Off | 4W 4000 Mw 802.11b/g/n Wifi Draadloze Router Versterker 2.4Ghz Wlan Bluetooth Wi-fi Signaal Booster Antenne Tdd Voor computer Router a.aliexpress.com/_d7o6apV

@mihailescue

4 жыл бұрын

Your bait boat is made from ABS ? What kind of glue have you used it ?

@DavevandeGruiter

4 жыл бұрын

Edgar, I use the Zettex 60 and yes its Made of ABS. Gr

What's the protection?

@DavevandeGruiter

2 жыл бұрын

Protection?

@edwarddarby2230

2 жыл бұрын

@@DavevandeGruiter u said on video that u solder the po protection on left side . What is the protection .? And why 3 wires

@edwarddarby2230

2 жыл бұрын

2 wires sorry

@DavevandeGruiter

2 жыл бұрын

@@edwarddarby2230 If you peel the antenne wire, you have a centercable and the outer protection(a lot of small wires around the centercable). I connect these small wires on 1 wire and solder this on the -

@edwarddarby2230

2 жыл бұрын

@@DavevandeGruiter thank u . Did u use 2 antennas?