the only helpful and informational video i could find on this cooler -- thanks!

@KleoYan

Жыл бұрын

Hi framednapkin, welcome to my channel and thank you for your valuable feedback 😉

Excellent, only video to actually show and explain the top cover. Thanks

@KleoYan

Жыл бұрын

Hello Philippe Yamagata, welcome to my channel and thank you for your valuable feedback.

Very clear and detailed information, thanks very much for sharing!….

@KleoYan

Жыл бұрын

Hi Peter, welcome back and thank you for the feedback. 👍

Another great review. I just ordered this instead of the 240mm Corsair H100i Elite which has the same price but with no ARGB. I already have a deep cool in my system which I've been using for 5 years so I trust this brand and it looks way better than Corsair

@KleoYan

Жыл бұрын

Hi جواد, welcome back and thank you again for your compliment. Yup, indeed this is a good liquid cooler. you won't go wrong with LS or LT from deepcool. all the best with your build.

Have a 7900x with this aio. I played with curve optimizer and set thermal limits much lower then 95. Getting above stock speeds running at 75c max.

@KleoYan

Жыл бұрын

hi 23srod, welcome to my channel. Nice, that's good.

very informative, thank you sir ❤.

@KleoYan

Жыл бұрын

Hello Fun.blend welcome to my channel and thank you for your feedback. All the very best with your build too. 👍

Deep cool makes great stuff. I always compare them to Arctic. Keep up the great work bro and stay safe.

@KleoYan

Жыл бұрын

Hi ya Swizzler 80, thanks for the compliment, you too stay safe 😊. By the way, your wishes will come true, I am in process to compare this Liquid AIO with the other 360 Liquid AIO, including the Arctic Liquid Freezer II 360 😉. Thanks buddy for all your support.

Hihi, I am new in AIO here and it looks like LS720 looks more complex than other AIOs. I have a set of Lian Li Infinity Sl120, any problems using them or best to use stock fans. Thanks.

@KleoYan

Жыл бұрын

Hello Melvin Ooi, you can swap out the fan but your AIO block will need to alter the connection abit. You will need to plug the aio argb cable to the splitter directly then to the motherboard. Then you SL fans which is mounted to the radiator. You will need to connect it to its uni controller.

Hi. Good day. Nice review. I would like to ask can I daisy chain 6 fans with the pump? Does it effects the performance? My board is ASRock b550m.

@KleoYan

Жыл бұрын

Hi Maria Luissa Villaester, welcome to my channel. It does help on the performance but is only by a little if you are doing push pull configuration. However it’s not possible to bridge 6 fans together into a motherboard fan header. You need to do them separately as in 3 to one motherboard fan header each.

Thank you for this video !

@KleoYan

Жыл бұрын

Hello Dobre Valentin, welcome to my channel am glad you like this content and all the best with your build.

thank you , very detail review

@KleoYan

10 ай бұрын

Hi AkkazounCs, welcome to my channel. I am glad this content did aid you and all the very best with your build. 😉

sir, very like your video, ty for work! in ur opinion, im struggle between this one and arctic frzzer 360, whats ur recomendation?

@KleoYan

Жыл бұрын

hello oleg starik, welcome to my channel. For me, I like Arctic AIO more then anything. These are my reason kzread.info/dash/bejne/hIlnmpqnnsbUhbw.html and kzread.info/dash/bejne/i4ijzNqLgNzYgdY.html

comparing the noise level for LS720 and AK620, which one is louder at full load and how much louder does it feels?

@KleoYan

Жыл бұрын

Hi Fallens Hearts, welcome to my channel. Definitely will be the LS720 as there are 3 fans instead of 2. The amount of noise is subjective to individual. For me is still at a acceptable level at full load on both.

Hey Kleo, thanks for this. I want to replace these fans with the Sl120 Lian Li fans. Struggling to understand, where do I plug the ARGB cable from the pump head if I am changing the fans? Thanks!

@KleoYan

Жыл бұрын

hi Huss You, welcome to my channel. plug the argb connector of your pump to this directly kzread.info/dash/bejne/k2Vkpq6Elbuudco.html then plug the 3pin to your motherboard and that's done. For the SL120 uni fans. plug to it's own controller.

@hussyou

Жыл бұрын

@@KleoYan thanks for your quick reply. So plug it into the extension then plug the extension into the motherboard? Do I still need to plug the SATA?

@KleoYan

Жыл бұрын

@@hussyou nope.. the motherboard 3A is enough to supply to your pump argb.

I noticed you mount the fans for air intake instead of pulling the the air out of the case. Did you try it both ways to see which cools the CPU better?

@KleoYan

6 ай бұрын

Hi Cruising with Mr. T, welcome to my channel. I've tested, there are no difference in temperature and I always do pull instead of push. If you do push, your radiator will start to accumulate dust and you need to remove the fans to clean or clear the dust. if you do pull, the other side of the radiator will show dust accumulation. therefore can just vaccumm it without removing the fans.

Hey I just bought this AIO it was on offer for £109 GBP here :) Now just waiting on X3D and 4090 FE!

@KleoYan

Жыл бұрын

Hi Kizzster, welcome back. That’s good, LS720 or LT720 are good liquid aircooler. Anyway am still waiting for Asus on the AIO. No news yet.

Got this cooler on special for $70. Installation was easy. Temps dropped about 10 degrees on my 5700x, compared to the ls520 it replaced. Only thing I would have like was additional screws that are a bit longer to mount the fans on the top of the rad, through my case.

@KleoYan

5 ай бұрын

Hi piet pompies, welcome to my channel and congrates on lowering down your CPU temperature. thank you for sharing your experience. 👍

hi so if i play a games like PUBG mobile on game loop or any heavy game the temperature will not be in the average of 90 or 100 with this cooler LS720 ?

@KleoYan

Жыл бұрын

Hello Ahmad Yousef, welcome to my channel. If you able to tweak the PBO2, you should not be hitting over 90 degrees with this liquid aio.

I was told I would need an additional mounting kit to get this cooler to work with am5. Did you have to use that or was yours out of the box able to mount to the mother board?

@KleoYan

Жыл бұрын

Hi KaiSupa, welcome to my channel. The LS720 are AM4 and AM5 ready. No additional mounting needed. They are all in the package when you purchase this liquid AIO.

@KaiSupaGaming

Жыл бұрын

@@KleoYan thank you for the information!

@KleoYan

Жыл бұрын

@@KaiSupaGaming you are most welcome.

Why are the hoses in the 3 o'clock position (next the the ram) as opposed the the bottom of the CPU (6'oclock). I keep seeing this and no one can explain it to me on AMD builds.

@KleoYan

Жыл бұрын

Hi Create Now Sleep Later, have tested various position and found out that this is the best position to place the block as it’s better in temperature.

@CreateNowSleepLater

Жыл бұрын

@@KleoYan Interesting. I can mount that way but requires a bit of twisting of the hoses. How much in terms of temps difference did you see? Why do you think the temps were lower?

@KleoYan

Жыл бұрын

@@CreateNowSleepLater applying with a thermal pad instead of the thermal paste. is about 2 to 3 degrees difference. infact the hose can be of an opposite direction but not facing down or up.That's what I find out. you can test it out yourself if you have this liquid cooler too.

I Had a question bro. There's two pwm on LS720 one is the 3pin pwm on the pump and the other 4pin pwm is on sata power connector. If I change the fan to other brand. Should I still connect the two PWM to the motherboard?

@KleoYan

Жыл бұрын

Hi Arjohn Villaester, welcome to my channel. If you are using other fans, you should connect those other fans to the motherboard. Please check the ampere of your fans and your motherboard fan header if the load capacity allows it. Example one fan is at fan load 0.5a and if you chain 3 together. It will be 1.5a. If your motherboard fan header is only with load 1a, then you should use a fan hub that has a power source from your psu (sata connector).

@arjohnvillaester3390

Жыл бұрын

@@KleoYan my concern is there's a 4pin PWM fan on the Sata power connector and 3pin PWM. forget about the fan. If im only using the Pump and Rad. Should I still connect the 3pin PWM and 4pin PWM to the motherboard?

@KleoYan

Жыл бұрын

@@arjohnvillaester3390 the cable (cable a) itself that have a 7pin connector, a sata connector, a 3pin connector (argb) and a 4 pin connector (pwm). As what you have asked, do this, plug the pump 3pin pwm connector to your motherboard and the pump argb to (cable a) 7pin argb connector, then the 3 pin argb of (cable a) to your motherboard argb header. The rest you don’t have to connect which includes the sata connector. Then your other fans, plug pwm to your motherboard (check the load and make sure your motherboard can cater) then the fans argb to your motherboard another argb header.

Are you able to change the pump speed in bio? Like idk y it keeps going full speed.

@KleoYan

11 ай бұрын

Hi Nemo, welcome to my channel. the pump header is a 3pin plug, therefore you can't control the pump speed via PWM settings in Bios, you will need to switch to DC Mode and to set accordingly to your liking. I would not advise you to set pump speed lesser than 80 percent. This will give you a better explanation, even it's on a fan, there are 3pin and 4pin connectors. kzread.info/dash/bejne/f3eBzdSKp6nUe7A.html

Hi, I just bought this Aio like 3-4 weeks ago. But I have a problem with the pump. I have asus A620 mobo and i use asus Armoury software for the argb effects. But in some colors and effects rgb pump flickering. I sent an e-mail to the deepcool support and they said me to check the bios is it on fullspeed or not. I checked the bios it is on the fullspeed and the all connections seems normal but I couldn't find a solution. Is it broken or is it about the software that I use or something else? Can you help me?

@KleoYan

8 ай бұрын

Hi Yalçın TİRYAKİ, welcome to my channel. Mind if I ask which Asus A620 Motherboard is that?

@yalcntiryaki2729

8 ай бұрын

Wow this is fast response thank you :) . It is Asus Tuf gaming A620 pro-wifi.

@KleoYan

8 ай бұрын

@@yalcntiryaki2729 ok. did you plug the sata cable to the extension and to plug it to your fan 7pin connector? also have you try different argb header of your motherboard, you have total of 3, 2 at the top and 1 at the bottom. if it still does not work, Troubleshoot one at a time, remove the daisy chained of your fans, leaving only one and plug your pump argb to it. then see if argb still flickers, if it does not, plus the second fan cable and test again, test till you have the 3rd fan. If everything all good, then it might be connection issue which you have done earlier or it could be one of the fan's cable not working properly.

@yalcntiryaki2729

8 ай бұрын

Flickering issue not on the fans, it is on the pump. But I'm gonna try to what you said. Thank you. Btw you can see the problem on this video; drive.google.com/file/d/1POFAZtYNbkiIQCGxqEimiO54jrchE7y4/view?usp=drivesdk

which is the best cooler for ( i9 13000K + Z790E)

@KleoYan

Жыл бұрын

Hello Today Trending, welcome to my channel. As for best cooler. I have no idea as I don’t own all air coolers or liquid aios. My opinion are arctic liquid freezer II, bequiet silent loop 2 and ek basic.

@adamenekes7366

Жыл бұрын

Hey man, if you want one of the best, look at the DeepCool LT720 - it was rated to be one of the top performance coolers for strong CPUs, such as the i9-13900

@KleoYan

Жыл бұрын

@@adamenekes7366 hi and welcome to my channel 😊 thank you for your feedback. I did a content on the LT720 too kzread.info/dash/bejne/ea18mdCMmMrWqKg.html

hi, i have no cpu_opt or a specific "water cooling" header. can i connect to any fan header instead?>

@KleoYan

7 ай бұрын

hi I wish I had Good Internet, welcome back, have you plug the water pump header to AIO_Pump? do that and you will have the CPU_FAN free.. you can then plug your Radiator fans to it.

@iwishihadgoodinternet7766

7 ай бұрын

@@KleoYan yeah none with aio pump either, what about sys_fan?

@KleoYan

7 ай бұрын

@@iwishihadgoodinternet7766 Hi, mind to tell me which motherboard brand and model are you using? Just wanted to direct you to the correct connector or header of your motherboard. Thank you!

@iwishihadgoodinternet7766

7 ай бұрын

@@KleoYan b550m aorus elite.👍

@KleoYan

7 ай бұрын

@@iwishihadgoodinternet7766 after checking download.gigabyte.com/FileList/Manual/mb_manual_b550m-aorus-elite_e_1201.pdf?v=233c964231b9890fcce0a3356c5bf6f3 , your motherboard only have 3 headers and all at of 1A. no 2A, you got no choice but to plug your AIO Pump to SYS_FAN1 and your Radiator Fans to CPU_FAN. If you have HWinfo, check on SYS_FAN1, make sure it's running at 3000 to 3100rpm.

What kind of screws are used to mount the fans to the radiator? M4 or m3?

@KleoYan

Жыл бұрын

Hi Enrique Ford, welcome to my channel. They are m3 thread

@quique0884

Жыл бұрын

@@KleoYan thanks bud

@KleoYan

Жыл бұрын

@@quique0884 you are most welcome and all the best with your build too.

I believe even the LS520 would work don't you ? Plus i see people tweaking the 7950x to run with some undervoltage MUCH cooler not loosing performance. Thanks for the video !

@KleoYan

Жыл бұрын

Hi Kumodot, welcome to my channel. Yes if you tweak the PBO2 and to lower the power drawn without affecting the performance. Also provided that you have a good airflow case, the the LS520 will be able to cool the 7950X

Also, did you intentionally have your fans in an intake config?

@KleoYan

Жыл бұрын

Hi Create Now Sleep Later, welcome to my channel. If it’s place at the top of your case. It will be push instead of pull. Just happened that this demo is pull, cos to blow air towards the board to sweep some hot air off it. Also if it’s place at the front of your case, i will have it pull too as this helps to prevent dust from accumulating to the radiator.

is it possible that we can set the RGB lights to only light up in the Pump section and all radiator fans without RGB lights?

@charsx3820

Жыл бұрын

is it possible for us to connect the 6pin cable from the block pump to the motherboard using the default adapter and we connect the 6 pin cable from the fan to the motherboard using the 4pin pwm adapter cable?

@KleoYan

Жыл бұрын

@@charsx3820 Hi welcome to my channel, do pardon me for the late reply as I miss your comment. if you watch this kzread.info/dash/bejne/k2Vkpq6Elbuudco.html 25:13 you will see that there is this adaptor to allow you to do that.

@KleoYan

Жыл бұрын

Hi Chars X, welcome to my channel, I don't think is possible unless you know how to alter the cable connectors.

@charsx3820

Жыл бұрын

@@KleoYan thanks a lot for the reply and thanks for the info

@KleoYan

Жыл бұрын

@@charsx3820 you are most welcome. all the best with your build 😉

Got this on a little ryzen 5600. Scoring 12k in cinebench r23 which is madness for that CPU. I cant even get this to hit 70 Oc in prime95 stress test with +200mhz on the core :D Gaming 38Oc, Cinebench 48Oc. Madness :D

@KleoYan

Жыл бұрын

Hi ya A McDonalds, welcome to my channel. I am gald this Liquid AIO does it's excellent job for you and thank you for your valuable feedback. hmm, I like to share if this will give you even better results. I have shared my method to apply thermal paste and majority of my viewers benefit form it which might interest you. kzread.info/dash/bejne/qo5mtJarn6mXj7Q.html hope it will give you even better results 😉

@amcdonald7479

Жыл бұрын

@@KleoYan using thermal grizzly Hydronaut. Highly recommend their pastes

@KleoYan

Жыл бұрын

@@amcdonald7479 oh, pardon me, don't get me wrong, what am sharing is the method to apply thermal paste, is not about which paste to use or purchase. Just that I find that useful and it's not a must to use my method. So sorry if it mislead you.

Hello, Good day. Can I ask something. If I increase the RPM of the fans, Thus the pump also increasing the RPM of the pump? I wondered the pump and the pump is in daisy chain connection.

@KleoYan

Жыл бұрын

Hello Arjohn Villaester, welcome to my channel. nope the pump is seprated from the fans, as illustrated, the pump goes one fan header and it's running at full (it's a 3pin connector) else the fans are on another fan header which can be controlled (4 Pin PWM)

@arjohnvillaester3390

Жыл бұрын

Thanks man. I hope you do also fan control on ASRock bios. :)

@arjohnvillaester3390

Жыл бұрын

On the video bro. Did your pump also full speed or only the fans?

@KleoYan

Жыл бұрын

@@arjohnvillaester3390 yea I can control the radiator fans rpm through my ASRock motherboard.

@KleoYan

Жыл бұрын

@@arjohnvillaester3390 the pump is at full speed. Infact most AIO liquid cooler I use. I will have pump to run at full speed.

Mine start making noises from either a pump or radiator after 7 months,possible air and bubbles in the radiator unit or bad pump. I will have to take it to repairs to see what is wrong with it. I'm not happy about it :(

@KleoYan

11 ай бұрын

Hi RealKekec, welcome to my channel and sorry to hear that. Now it could be how you place your liquid AIO in your case. If you mount it to the front, it's not wrong to mount the hose at the top where the hose is higher than the pump, but still there will be air circulating inside. Best way is to mount at the top where there are no air circulations and if you mounting at the front, I do understand due to GPU length, it will be hard to mount the hose at the bottom instead at the top.

@realkekec4028

11 ай бұрын

@@KleoYan Hi,i mounted the rad on top,i have big tower case with lot of space.The AIO was working silently for 7 months,then start to rattle and making constant noise like clicking.It is quite loud,even with side glass panel on.The CPU temps were normal,idle 32-37C,on load 75-85C ,nothing was overheathing.And i check out all the fans (7 in total),they are OK.Today i drop the rad and pump back to store,so they can find the reason for problem.Anyway,now i'm with out PC to use,for how long,i don't know. It sucks :)

@KleoYan

11 ай бұрын

@@realkekec4028 I see. Hopefully they will replace it for you. Just a suggestion, I always keep an aircooler just incase if emergency. You should get one to stand by too.

@realkekec4028

11 ай бұрын

@@KleoYan I hope so too,and i did have one air cooler (noctua) but i give it away to my nephew :)

@KleoYan

11 ай бұрын

@@realkekec4028 I see. Guess you have to wait till your liquid cooler is repaired.

i have Kraken X61 for my Ryzen 7700X, in idle i get 32 degres and in load i get 44 degres. My Kraken run usually with 2 fans on the radiator but a fan is broken so i run with only 1 fan. I've only enable ECOMODE into bios.

@KleoYan

Жыл бұрын

Hi Yan Bourgeois, welcome to my channel. If your aio is under warranty, get the fan replaced or you can grab new fans and replace them.

@yanbourgeois1602

Жыл бұрын

@@KleoYan i Got m'y AIO in 2014 lol its not warranty anymore

@KleoYan

Жыл бұрын

@@yanbourgeois1602 Oh I see, hmm.. consider your AIO is more than 6 years. you might want to get a new AIO. I mean its up to you because, replacing a fan and if the Liquid AIO does not function as it is.. then that will be a waste.

@yanbourgeois1602

Жыл бұрын

@@KleoYan mu AIO work pretty good

@KleoYan

Жыл бұрын

@@yanbourgeois1602 ok. So long it works for you 😊

Will you test the Deepcool lt 720 too ? on ryzne 7950x ?

@KleoYan

Жыл бұрын

Hi 丹·乌迪拉 , welcome back. Yup, infact you can refer to this content. kzread.info/dash/bejne/ea18mdCMmMrWqKg.html

@unnamed4218

Жыл бұрын

@@KleoYan lol didnt see that vid🤣🙏

@KleoYan

Жыл бұрын

@@unnamed4218 no worries. enjoy.

Great video. What is the size of the thermal pad? Can i use the same pad for ryzen 7900?

@KleoYan

Жыл бұрын

Hi Mordavia, welcome to my channel, they are 40mm x 40mm thermal pad for CPU and I would not advise you to use it permanently, you should use thermal paste. if you decided to get it. you can obtain it here www.amazon.com/Innovation-Cooling-Graphite-Thermal-Pad/dp/B07CK9SHZG/ref=sr_1_3?crid=3VS07KOBOWHRV&keywords=thermal+pad+for+cpu&qid=1682034522&sprefix=thermal+pad+for+cp%2Caps%2C309&sr=8-3

@mordavian

Жыл бұрын

@@KleoYan Thank you for the information. I should apply thermal paste then attach pad. Right?

@KleoYan

Жыл бұрын

@@mordavian Correct. use thermal paste. I did it here as it's just a short illustration.

@mordavian

Жыл бұрын

@@KleoYan Ok i will follow your instruction. Thank you. How long does this thermal pad last?

@KleoYan

Жыл бұрын

@@mordavian this thermal pad will last a longtime. You can try if you want to but I would stick to thermal paste. As mentioned, I use this basically for demo purposes.

Hi bro I found out mine running 2300rpm. It's 40-47c no running apps. Does the RMP AIO really needs to get full speed always?

@KleoYan

Жыл бұрын

Hi Arjohn Villaester, welcome to my channel and yes the pwm will run at full speed and it's best to run at full speed. if you want to change the speed you can. set the fan mode in dc mode and set to the profile you need the pum to run. this can be set in your motherboard UEFI or BIOS.

@arjohnvillaester3390

Жыл бұрын

@@KleoYan how do u set the fan in PWM bro? Do u set it to full speed or custom?

@KleoYan

Жыл бұрын

@@arjohnvillaester3390 I am not sure which board you are using, for pump I will set in my UEFI as DC mode than i set the profile. you can refer to this video. it might not show you the pump but with the explanation of the difference between PWM and DC Mode will clear your thoughts kzread.info/dash/bejne/f3eBzdSKp6nUe7A.html

@arjohnvillaester3390

Жыл бұрын

@@KleoYan mine set to auto. Then 85% pump runs 2800rpm. How about yours bro? It's 3pin by the way.

@KleoYan

Жыл бұрын

@@arjohnvillaester3390 when it is set to auto and with a 3pin header. it will run full. as mentioned in my video kzread.info/dash/bejne/f3eBzdSKp6nUe7A.html if I want to set my pump, I will set it to DC Mode and select the profile. As for other motherboard, I am unsure of them. I am very use to ASRock motherboard. you will need to fiddle with the settings in your UEFI and test them out. Also for 3pin connectors, it's not control by PWM, only DC Mode will control it.

Can I also use the le720 on the 7950x?

@KleoYan

5 ай бұрын

hi Luanna Ferreira, welcome to my channel. Yes you can do that. no issue.

how many degrees playing in 4k?

@KleoYan

Жыл бұрын

Hi GabboGameplays, on AM5 platform, by default it's always 95 degrees, unless making use of PBO2 settings. while playing 4K the clock frequency does change slightly. In this video is at 4.8Ghz consitantly and 5.3G boost clock. Once on 4K gaming. the frequency drop slighty to 4.6 to 4.7Ghz with max boost clock at 5.0 to 5.1Ghz.

I recently bought this AIO, it does a great job with my i7-13700K. BUT, I can't stand the proprietary cable connectors, they make the simple complicated, to no gain for the end user. Also, they introduce limitations on cable routing that are not appreciated. My solution was to buy Coolermaster Mobius fans, they have similar (and superior) specs and the cabling is much simpler. Cummulative cost to me I could have bought a much more expensive AIO and still saved money. I very much appreciate DeepCool's work, but they have to lose the idiotic notion of proprietary connectors. I won't be buying them again until they do.

@KleoYan

Жыл бұрын

Hi Tradcat Pat, welcome to my channel. This I do agree with you. Infact if deepcool can provide us with two option, I believe more PC builders will purchase this liquid AIO. The method of either to use their propretary cable connectors or to have an option to use the standard connection. For standard connection on the AIO pump block and the fans can be done, just need to have the cable covertor, one for the pump and other for the radiator fan. Thank you to have visit and to have leave your valuable suggestion. 👍

@RexZShadow

Жыл бұрын

I'm also considering changing the fans as well, there anyway to check the spec of the fans they are using to compare? I'm considering cooler master sickleflow fans.

@CreateNowSleepLater

Жыл бұрын

I am running into this right now. I bought a 3 pack, 2 for the bottom of the case, I for the rear. The rear is kind of orphaned because the dont offer the PWN/ARGB spliiter per fan. So I am trying to daisy chain the rear fan to connect back to the 2 bottom fans. What a pain, my hub is so close the the fan itself.

Is this prefilled or do you need to fill it?

@KleoYan

7 ай бұрын

Hi aaronmagic, welcome to my channel. It’s a pre-filled liquid AIO.

saw this on sale and I have the deepcool AK620 Digital but the price of this one is on sale is quite tempting hahahaa but I do not know if its worth going or this with the 7800x3d

@KleoYan

8 ай бұрын

Hi deck pogi, welcome to my channel, I can't tell you as I do not have a 7800X3D, but based on a 7950X, the LS720 is doing better compared to the AK620 Digital but only by 5 to 8 degrees difference. If your AK620 Digital have a load of 83 to 86 degress on your 7800X3D, use it. That will save you a square bit and who knows, Deepcool might come out with a better liquid AIO.

@deckpogi2680

8 ай бұрын

@@KleoYan the max temp I saw on my AK620 is around 83 degree rarely see to hit 85

@KleoYan

8 ай бұрын

@@deckpogi2680 then is all good 😉unless is really dirt cheap on the LS720. but to be honest, I prefer LT720 more than the LS720.

@deckpogi2680

7 ай бұрын

@@KleoYan what's interesting with the lt720???

@KleoYan

7 ай бұрын

@@deckpogi2680hi welcome back. It’s just the stealth black and the focus of the pump block and it performs slightly better than the LS720.

You need beer testing graphs and comparison displays. You are also using an open bench setup which isn't what a deal world use case for everyday users.

@KleoYan

Жыл бұрын

hello codelinx, welcome to my channel and thank you for your suggestion. I see what I can do.

have some config but temp little loading jump over 74C

@KleoYan

Жыл бұрын

Hello Рпагор Предович, welcome to my channel, yup, if you know how to limit the TDP and to fiddle with the PBO2, it does good thermal results. Thank you for your feedback.

wich one is good LT720 or LS720

@KleoYan

Жыл бұрын

Hi x_maj0ud_x, welcome to my channel. Both are as good. Only difference is that LS has argb fans and LT does not. kzread.info/dash/bejne/ea18mdCMmMrWqKg.html

What about the SEA version?

@KleoYan

Жыл бұрын

Hello KennY117, welcome to my channel. Both same performance. That’s why I did not review on that.

@kennY_72

Жыл бұрын

@@KleoYan Allright,. Thanks for that.

@KleoYan

Жыл бұрын

@@kennY_72 you are most welcome.

Do you think that the LS720 can cool the 13700k stock? My LS520 does 210w before going 100C.

@KleoYan

Жыл бұрын

Hi DropTheHaze, welcome to my channel. Speaking of which, I have done a test with my 13700K at stock in a Lancool 216 with this cooler it can hold at 87 degrees with room temperature of 29 to 30 degrees.

@andrie20

Жыл бұрын

@@KleoYan So 253w at 87C with 30C ambient?

@KleoYan

Жыл бұрын

@@andrie20 it’s 243watts with room ambient or 29 to 30 degrees. Something to mention, I have use the contact frame ILM and my method to applying the thermal paste which have full contact between the ls720 block to the processor IHS. kzread.info/dash/bejne/qo5mtJarn6mXj7Q.html

@andrie20

Жыл бұрын

@@KleoYan lt720 is the same as ls720 right?

@KleoYan

Жыл бұрын

@@andrie20 LT720 and LS720 are identical. If you worry too much. You can do power limit in your uefi. Though my default is good. I have limit my processor not to draw more than 185watts, offset vcore to 0.1mv and using loadline calibration 3. which gives me 5.1Ghz consistent and random boost clock at 5.2Ghz to 5.3Ghz. Having max temp at 82 to 83 degrees. My board am using is the ASRock Z790 PG Sonic with the 13700K.

4.09k sups 🎊🎉🤗

@KleoYan

Жыл бұрын

Hi Mark, welcome to my channel and thank you to have visit and to sub to my channel.😉

So basically you can only use these fans that are installed on the aio

@KleoYan

5 ай бұрын

Hi Heldy, welcome to my channel. You can choose to use other performance fan and you only need to exclude the fan connector on this AIO.

@Helden1pro

5 ай бұрын

@@KleoYan ah ok thanks alot for the quick response ☺️

@KleoYan

5 ай бұрын

@@Helden1pro you are most welcome. All the best with your build too. 😉

🎉🎊🎈

@KleoYan

4 ай бұрын

Hi Etienne, welcome to my channel. I am glad you like my content. All the best with your build 😉

Did you need a special AM5 mounting bracket?

@KleoYan

Жыл бұрын

Hello Kevin Knutson, nope, no special bracket is needed. AM5 processors are square so even pressure is applied. If you worry about the over spill of paste to those holes at the side. you might want to watch this. This will be less messy and based on the comments of my viewers, they gotten very good thermal results. kzread.info/dash/bejne/qo5mtJarn6mXj7Q.html

95 graus dissipando 185W... tem coisa errada ai! Aqui no 13700KF dissipando 267W batendo os mesmo 95 graus... certamente por estar na bancada e não no gabinete é o que está gerando um resfriamento ruim. Aqui gabinete LianLi Dynamic ROG XL com 14 fans bora digital, sendo 6 fans no radiador com sistema push and pull, em jogos como CoD tudo no ultra, CPU trabalha tranquila aos 47 graus. Em idle 28 graus com temperatura ambiente de 19 a 21 graus.

@KleoYan

Жыл бұрын

Hi Rodrigo Rocha, welcome to my channel. there is nothing wrong with the readings. Infact you can't compare a 13700KF with a 7950X. If you seriously wants to compare. my 13700K is running at 84 degrees with load of 241w. You need to know the architecture of AM5 platform.

@rodrigorochapatriotaoficial

Жыл бұрын

@@KleoYan 241W certamente está em STOCK... essa temperatura de 84 graus é perfeitamente normal pro 13700K ou KF... 7950X é bem mais caro que 13900K e tá levando uma surra em todos os quesitos. A Intel vai nos surpreender na 15a geração... AMD vai ser passado!

@KleoYan

Жыл бұрын

​@@rodrigorochapatriotaoficial First you've mentioned there is something wrong. which part is wrong, my method of testings? You have even mentioned about system not being in a case? It does not make sense to have better cooling with a system in a case as compared to open bench and now you've mentioned AMD will be passed! If you are comparing Intel vs AMD, thank you for your info, but this content is on AMD which I find is not relevance.

make LT 720 360mm with Intel 17 13700k

@KleoYan

Жыл бұрын

Hi IND{RS} Extreme, welcome to my channel. I see what I can do, no promises. thank you!

i bought it for my 5700x because it was only 80 bucks 😂

@KleoYan

8 ай бұрын

Hi Spayrex, welcome to my channel and wow that’s a good price. It will do excellent for your setup 😉

@spayrex_

7 ай бұрын

​@@KleoYani just have a question my aio pump has a anyoing humming, did you also have that problem?

@KleoYan

7 ай бұрын

@@spayrex_ nope. Not at all, it’s dead quiet. I would advise you to contact the seller and have it replace.

@spayrex_

7 ай бұрын

@@KleoYan damn ok thx

@KleoYan

7 ай бұрын

@@spayrex_ most welcome.