best way to clean one of these, fast and effective too, thankyou

@green-crocs-fixes1520

3 ай бұрын

Thanks MNSHP, yes but please allow for time to dry out, happy to help 😀.

I live rural and you just saved me a nightmare, trying to find an engineer, in the late hours of Saturday night, pound coin deep in the little drain between the condenser and the water pump drain tank. Well done, your a hero.

@green-crocs-fixes1520

8 ай бұрын

Happy to help William, glad you managed to resolve, however a £1 coin so far down is serious lack of maintenance. But well done.

how much for a call-out?? I'm in London - This is the best video out there

@green-crocs-fixes1520

Ай бұрын

Flattered JoJo, thanks, I'm an engineer but not this type I'm afraid 😀.

@lilmzlondon

Ай бұрын

@green-crocs-fixes1520 😭😭😭😭😭😭 OK thank you

Tip on the condenser you can unscrew the front bit i find and you can get the fluff out :)

@green-crocs-fixes1520

6 ай бұрын

Thanks Laundrylad 😀.

Great, but is it really ok to pressure wash the electrical items? And aren't the fins on the condenser a bit delicate for pressure washing? Thank you for the brilliant instructions.

@green-crocs-fixes1520

9 ай бұрын

Thanks Gavin, and no it is not ok to pressure wash electrical items. This is a none runner I purchased to repair which as you can see has not been maintained, hence why it broke down in the first instance. I do stipulate that the machine has dried out though. This particular Condenser unit does not have Fins which are delicate as you have stated but if so you just need to know your limits with tools. Regards 😊.

Mine has started to smell like a wet dog? I’ve cleaned it as best as I can but it still smells. Any advice

@green-crocs-fixes1520

Ай бұрын

Hi Amy, these Condenser units can be quite a Labyrinth and difficult to access especially if they have been neglected. have look at this video which may help you to find the source of your problem; kzread.info/dash/bejne/dZmfqdqrZ7m3iNo.htmlsi=Mg4A1JCafHFkXNtQ

i can’t put the condenser back inside :( i took it out to clean please someone help

@green-crocs-fixes1520

2 ай бұрын

High Art83, at the front of the Condenser the white plastic section, if you can bend the bottom lip up as this usually catches on the Condenser housing at the back inside. Use a pair of Pliers to bend the entire width of the bottom section up slightly, not too much otherwise the unit will not drain correctly.

@art83islife

2 ай бұрын

@@green-crocs-fixes1520 thank you soooooooo much