Electrical circuits Fuses Metal parts Electronic parts Power connections etc. all these will be damped and could get rusty if high pressurised water sprayed on them. Car manufacturers recommend cleaning engine bays using cleaners and degreasers and thorough wiping

@sther6190

2 жыл бұрын

AAY AYYY CAPTAIN

@jaymoney119966

2 жыл бұрын

??? Ask my jeep that drives under water if it’s cares. Being a Mercedes I think thee are smart enough you use a gasket or o-rings on most of those components…

Why is so satisfying to watch at 1Am🥰

@hmsportscars4427

Жыл бұрын

You are right bro

@connoisseurdetail

Жыл бұрын

at 10 past 1 I can only agree lmaooo😂😂

@jacques4223

2 ай бұрын

🤣 1:43am here. Literally gratifying to watch this.

Simplicity and the true definition of action but not words!!

Before i even got my new car i got into detailing because of your videos! I loooove keeping everything clean and ive already ordered so many products. 🙌🏻🙌🏻

Very relaxing and clean keep up the good work!

@VermijlCarDetail

3 жыл бұрын

Will do! Should have a new video up next week! Thanks!

ASMR great!! Good job~~☆☆☆☆ washing the engine bay.

@VermijlCarDetail

3 жыл бұрын

Thanks for the support!

Another great job done👏🏼

These videos are my therapy :-)

I have clean the engine now,!(in the niht in argentina)good works

Great video, thank you!

@VermijlCarDetail

4 жыл бұрын

Thanks man!

I just did this to an ML350 Bluetec, however i removed the engine cover. Now I know it's clean everywhere. I like to use Superclean, i buy the gallon jugs and then dilute it for different applications. For the engine bay no dilution is needed.

I've learned a lot watching 👀 your videos. Thanks again for sharing your skill it's very rewarding.

Just found your KZread channel and subscribed... watching you detail this engine bay was very relaxing!

@VermijlCarDetail

3 жыл бұрын

Thanks for subscribing! I really appreciate it! ✌️

@Ibrahim.K03

2 жыл бұрын

Did u disconnect the battery?

My idols detailer..love it

U r the best, elegant and perfect job.👍.

Amazing work!!!

@VermijlCarDetail

4 жыл бұрын

Thank you!

@lichling8071

2 жыл бұрын

ok

Music to my ears ❤

Hi Vermjil ! Did you dilute the reset in 1:400? when I want to prepare my dilutions, I have 3 ml for 1.5 l is it possible? what dilution do you use to make the engine compartment?

so relaxing

Your content is awesome dude !

@VermijlCarDetail

3 жыл бұрын

Thank you Kevin! Glad you're enjoying the videos!

Great job! Carpro MulitX is not designed for engine cleaning it is a multiple Iron & Tar remover.. Both dose not contaminate inside engine. I prefer degreaser so it work better for engine oils.

Perfect!!

@VermijlCarDetail

3 жыл бұрын

Thanks Ronaldo!

as far as I know, one should never pressure wash an engine bay. there are some connectors and seals that yeah, they're supossed to be waterproof but over time and with temps up and downs they tend to be less sealed. so a garden hose would do the job safer.

its Amazing!!!

You are awesome bro. Great video.

@VermijlCarDetail

4 жыл бұрын

Thanks! I'm glad you liked it!

What is the dilution for multi x for use in the engine bay? Also is there anything I need to wrap in a plastic bag (avoid getting electronics wet) in a 2012 e300 Mercedes?

Just WOW😳🔥

Nice video . Is it possible to use the blower on a lower speed to spread the dressing just an idea. Thanks for uploading.

You can also use the blower to blow the Perl into every nook and cranny. Greetings from Holland

Insane job mate

Nice video and Great job . I live in uk . I would like to come there to make my car nice !

Hey bro that is very good job

Loved it

Hi Dude, is steam wash a safer method for engine bay wash? ? plus the protection of plastic cover on electrical parts.

i love your videos so much

@VermijlCarDetail

3 жыл бұрын

I really appreciate it!

awesome

I do this to my car and it doesn't turn on in 3 months 😂😂😂. Great job!

When doing engine bay cleaning, did you disconnect battery and cover any components like Alternator? Am planning to do the same for my BMW X5 G05… but figuring out anything that needs to be covered

Mind blowing. Just love watching your videos.

Nice

É isso aí ótimo trabalho! Aqui eu também faço muito detalhamentos em motores e tem gente que pensa que isso é um bicho de sete cabeças, hoje em dia pra mim lavar motor é a coisa mais normal desse mundo. Se motor não podesse lavar o mecânico não pediria pra fazer isso. Tamo junto amigo 🤝. 🇧🇷

Very nice job! Have you testing koch chemie Motorplast? I like it more than carpro plast... Only spray on the engine and finish 😉

Idol. Verygood.

@vermijl - what is the fan attachment on your MTM and also the quick release?

@VermijlCarDetail

3 жыл бұрын

Both my foam cannon and 45° spray nozzle are attached to a Nilfisk KEW quick release adapter

Be careful that all that stuff is not going to the air filter, just an advice. Nice job by the way

@j.c.ubagox873

2 жыл бұрын

Why tell us?

@jaysirichan7285

2 жыл бұрын

Its all good just mercedes.

@jon7926

4 ай бұрын

It will smell wet dog in the car if you spray water in those vents in the engine bay ,This is why you need to be careful if you owned a merc you know

I love your videos. No words, just great work, cool music and addiction to perfection:). So I should not be afraid to spray water on my engine?:)

Nice...

Amazing work!! Thanks for your videos!! Do you have any special careful with water on the engine bay?? Thanks again!!🚘

@VermijlCarDetail

4 жыл бұрын

Thank you, appreciate it! I never had an issue doing it this way with newer engines. With older engines I'd recommend covering up any sensitive and exposed electrical parts etc.

@urbantactical148

2 жыл бұрын

After what year do you consider a modern engine?

@carlosalbertohernandezgonz2604

2 жыл бұрын

@@urbantactical148 good question

You’re my favorite Detailer. Very good work. and do you have a US link to the Zonder Tip for the Sprayer? I’ve been looking for it and can’t find it.

@VermijlCarDetail

3 жыл бұрын

Thank you so much man! I’m afraid I can’t help u with that, I couldn’t find it in the US.

@bigjallday

3 жыл бұрын

Thank you so much! Please countie the good work. God bless you! Peace and blessings

Another fantastic one my guy 💪🏽 is it best to clean in a warm or cool engine bay?

@VermijlCarDetail

4 жыл бұрын

Thank you! I don't think it really matters, especially with these newer engines, but it's probably best to clean when it's cooled off. Also if you're cleaning an older engine I'd recommend covering up any sensitive and exposed electrical parts etc.

Hi bro I like your works but please tell me about the steps before cleaning the engine bay what are the precautions steps to be taken in case of vehicle whose engine bay comes with proper guard or something

@VermijlCarDetail

3 жыл бұрын

Hey man, I recommend covering up any exposed electrical or sensitive parts. On modern cars you should be fine doing it the way I did it.

perl leave such a nice finish :) looking at that hand foamer, make me wonder if multiX actually can be foamed too? if you ever had try :)

@VermijlCarDetail

3 жыл бұрын

Hey Lukas, I guess you could foam MultiX, never tried it, but it should work.

Wow looks amazing! I'm new with detailing but this is what I'm worry. All- alternator and similar electric parts and connectors with jet wash? How this works? Final effect is great! Tom.

Question: when you clean the engine must turn on or turn off?

Greetings what do u have n the pump spray

Great job 👏 .. but to be honest I would close the air filter vents to be more careful 😄

can you wash the engine of a 2008 seat Ibiza? without having electrical problems? Greetings from Mexico City

At what dilution did u use the Perl ?

Are you cover the Intake air surge when clean engine bay ?

@VermijlCarDetail

3 жыл бұрын

I don’t think it’s necessary. Modern engine bays are designed to handle some water.

Question do you clean under the engine covers or just over them??

I'm your fan now

@VermijlCarDetail

2 жыл бұрын

Thanks for the support!

thank god its only dust inside the engine bay.. here in malaysia.. you can see many kinds of stuff inside the engine bay.. mud, cats furr and etc

Beautiful survey video, only not enought clean under car hood and under shield motor .

Thanks for the vid. May i ask you what’s in your ik sprayer ?

@VermijlCarDetail

3 жыл бұрын

I’m using CARPRO Reset in the iK sprayer, which is a pH-neutral car shampoo

Nice work! Very good camera job. May I know what camera you use please?

Great content, some say not to use pressure washer on the engine bay?

@MBB6634

3 жыл бұрын

I wouldn't recommend it.. It has is risks

Well done, one info in mind just I need to know , I think the car must be cold right?? it should not be hot to perform this detailing and washing.

hello..! Doesn't it matter if the alternator gets wet?

All of the engines that you could have chosen, you pick the one that have 95% flat panels.

Do you have to disconnect the battery or cover the alternator whenever cleaning any engine bay?

@VermijlCarDetail

3 жыл бұрын

You can if you want to be extra careful, but it’s not necessary for modern cars

@sergiosanchez6927

3 жыл бұрын

I always do just to be more careful

Хорошая работа! P.S. Это НЕ грязный двигатель 😉

Thanks for the vedio... Subscribed and liked

@VermijlCarDetail

3 жыл бұрын

Thanks for your subscription! I appreciate the support!

Na het zien van dit filmpje direct de carpro spullen besteld. Een vraagje, verdun jij de multi x en de perl?

@VermijlCarDetail

3 жыл бұрын

Super! Zijn echt top producten. Ik verdun MultiX gewoonlijk 1:20 (1:10 indien heel zwaar vervuild) en Perl 1:3, als je het graag wat meer wil doen glanzen kan je het puur of 1:2 gebruiken 😉

No one loved and caressed their windshield water cap like he did !

@VermijlCarDetail

3 жыл бұрын

Gotta love the windshield water cap!

So nice ❤️❤️❤️❤️❤️

Helemaal zen wordt ik hiervan 😄

Do you disconnect the battery while cleaning the engine bay? Awesome work!!

@VermijlCarDetail

3 жыл бұрын

Thanks Philipp! On modern cars I don’t do that. If you want to be extremely cautious you can, but I don’t think it’s necessary. Modern engine bays can deal with some water.

@nix_fx

3 жыл бұрын

@@VermijlCarDetail 2013 models and up?

@kwl189

2 жыл бұрын

@@nix_fx easily will cope with that

What product you use to have the foam thick like that?

@VermijlCarDetail

3 жыл бұрын

Carpro Reset! 👍

nice work. but it would be great it you could show cleaning of ~15years old typical john smith passat diesel, where a lot of gunk whas build during that time. this would show the real transformation. not mild dusted new engine ;)

@VermijlCarDetail

3 жыл бұрын

Thank you man! Unfortunately I do not get to work on ~15years old typical john smith passat diesels. Most cars I get to work on are (fairly) new.

Cool vid, but what about the dirt under the engine cover? :P

Hey VCD, big fan. I'm trying to use your method but I just had a question. What is that foam stuff that you used? (Is it the CARPRO Reset Shampoo?) Is that the same as regular car shampoo for washing the exterior? And any reason you used the iK Foam PRO 2 instead of a regular foam gun/cannon? Thanks, and keep up the great work

Can i do this to my 2015 opel corsa??

Can you do this on any car? Like doesn't this hurt the belts?

I would love to see a wide shot of the cars at the climax , please look into it , it will add more satisfaction for the viewers 🎉

What about cleaning removing the plastic moulding and washing the engine?

I would’ve let the dressing set a bit before wiping..I also would’ve pre treated and scrubbed and saved having to water down the motor twice...

Quick question: do i need to run the engine when im spraying it with the power washer?

@VermijlCarDetail

3 жыл бұрын

Yea, if you want to be really cautious you’re better off disconnecting the battery instead of running the engine.

@MacMcLinn

3 жыл бұрын

lmfao what

Dude you are the best👍👌🤟

What are you dilution rates for both Carpro product used?

@VermijlCarDetail

3 жыл бұрын

It's been a while, I usually use MultiX 1:10 - 1:20 depending on how dirty the car is. I recommend using Perl 1:1 (satin) - 1:3 (more of a matt finish)

is it safe to wash the engine bay like this? the car I did so last time lost one valve after wash the engine bay like this....

What kind of engine bays can you do this to. I’m guessing you can’t do it on all of them. Is it only ones that have everything covered?

@PolishedMobileDetailing503

2 жыл бұрын

Only newer cars.

nice detail👍 isn't it dangerous with that amount of moisture in that engine bay?

@VermijlCarDetail

3 жыл бұрын

Thanks Artur! I’ve detailed a lot of modern engine bays this way and I’ve never had an issue. If there are any exposed electrical parts or wires I do cover them up with a plastic bag, just to be sure. But other than that you should be fine doing it this way! I wouldn’t do this on an older engine, in that case I prefer to use a steamer (also have a video on that)

@kwl189

2 жыл бұрын

If you cover the fuse box and alternator, then you’re good to go in most cases. Maybe take out the air filter or battery if you’re nervous and paranoid about it but otherwise it’s all good. The finish you get is insane as it’s rarely done with most cars.

@santana1830

2 жыл бұрын

@@VermijlCarDetail There should be no problem cleaning with water a Nissan Sentra Nismo 2018 I’m kinda scared doing it, there’s anything you could recommend me or I’ll just go for it

If the battery is in the engine bay. Do you cover it? Because I’m scared to use a pressure washer 😅😂

Vermijl what product were you using to foam with?

Those ignition coils must love you!

@user-zb6ez4jl3u

3 жыл бұрын

It’s not an old engine, they’re covered and not up on top.

@VermijlCarDetail

3 жыл бұрын

Exactly!

Is it risky to just use pressured water on prius c engine bay?

Should I let the engine dry entirely before I start it ?

@aswin9314

2 жыл бұрын

If you wash an engine bay as shown here. You won't have to think of starting it any more 😀

The first application of MultiX and Perl wasn't diluted? If not have you ever come across any etching/decomposing issues using it full strength? I've been too scared to attempt it.

@VermijlCarDetail

4 жыл бұрын

You could use MultiX undiluted when the engine bay is extremely dirty/greasy, it was designed to be used like that (only for certain purposes) but in this case I used it 1:10. Strong enough in my opinion, I personally have never used it undiluted. Also Perl has been diluted 1:3.

@Tdub33

4 жыл бұрын

@@VermijlCarDetail Thank you! I greatly appreciate it. Definitely subscribing 🤙

@VermijlCarDetail

4 жыл бұрын

T_Dub33 you’re welcome! Thanks for subscribing!

Very nice job on that engine bay. The commercials are getting a bit to much and it's not just your channel , watching KZread is like watching TV with a commercial every few minutes. It's becoming lee's enjoyable.

@grahamforster82

3 жыл бұрын

Go premium. Helps monetise the content creator

@GOLD_FEVER

Жыл бұрын

If you're not smart enough to install an adblock then you deserve to watch a commercial every 15 seconds.

Wtf pressure wash under the hood ???