Just putting it out there - I'd buy a CH-47 module in a heartbeat.

@felippejonsson6078

2 жыл бұрын

Yeah, i buy two 😀👍

@leothalion3983

2 жыл бұрын

Right!!!!!

@michaelmaneese9367

2 жыл бұрын

CH-47 + Afghanistan map 👌

@phoenixsui

2 жыл бұрын

Or Blackhawk or any nice Transporter :) Along with improved code for them beeing able to do more stuff and better.

@bioshockzoa

Жыл бұрын

they heard you 😝

I've been craving this since day one. Holding a stable hover and telling George where to look is more chalenging than I thought. Glad to see this coming soon

@picure

2 жыл бұрын

Its already here. U can try it out. It works already

@DOGosaurus_rex

2 жыл бұрын

@@picure idk about that I tried and it kept drifting even though I was under 5 knots a.a.m.o.f. I was like under 3 knots

@Sanuske4

2 жыл бұрын

@@picure It's not in yet.

@ryz_vik

2 жыл бұрын

@@Sanuske4 It's been in the game for nearly 2 months now. That is if you are playing on OpenBeta, if you are on Stable, then no, it is not on Stable, atleast, I am not aware of.

@ryz_vik

Жыл бұрын

@@johndoehler8047 2 Weeks is not that long brother only a quarter of our lifetime :)

This is going to take all of the fun out of my hovering while eating ham sandwiches technique, but a lot less food in the keyboard is probably a good trade off.

Huh, CH-47 in here...

Good to see the South Atlantic already has TSD map down to 15km even

I'm glad this feature wasn't in the initial release. Helped alot to learn to actually control this manually. I bet I would have relied way too much on the hover hold.

@sinepilot

2 жыл бұрын

That's how I feel about the FCS. I remember back in the Longbow days I'd always use radar guided instead of laser guided, never bothered to get good with the TADS. Now I'm a tadsmaster since there's no FCS holding my hand haha.

@TimmyRH

2 жыл бұрын

@@sinepilot and without IAT

@PaulHumphries68

2 жыл бұрын

Great point, I thought exactly the same, learn to fly first then use….Get ready for skill fade if you stop practicing though.

@agamemnonn1

2 жыл бұрын

Let’s not start making excuses for incomplete features in a product that costs the same as a AAA game. Also, it’s nobody else’s business how one wishes to learn an airframe.

CH-47 Chinook? ? ? 🤔🤔🤔

Like fine wine over time, Eagle Dynamics just keeps getting better and better! Keep it coming Wags!

If you're making a video about flight controls and trimming it would be quite useful for the future to bring up the control cross in the top left so that people can more directly see what is exactly happening. thanks for the updates !

I want that "DCS World Ham Sandwich" module!

after FINALLY dialing in my Virpil controls I can safely say I can now hover very well even without attitude hold mode. The right setup makes SUCH a difference.

@Verdigo76

4 ай бұрын

What setup is that?

Excellent to see more flight automation being implemented !

Thank you Ed for implementing the hover and velocity mode sooner than later. They would definitely be handy in flying the Apache and at the same time do other important stuff much more easily.

This is developing forever! Thanks for your hard work updating this simulation on and on, this is a best sim!

A lot of folks are going to be happy to see this! Thanks ED and Wags (of course)

I have been so sad trying to study your guide and failing badly until I realized last night why my sim wasn't responding like your video. I had it set in gameplay to the game mode setting and discovered none of the things in the video would work with the set to on. Once I unchecked the box and went back in I have been hovering and holding and all 😊😊😁😁😁 This is really about be fun now! Thanks Wags! Hooah!

This is my favorite module in DCS by a long shot. Thanks to Wags and the ED team for taking on this beast of a project and making it as great as it already is. Keep grinding fellas, and we'll keep supporting you all the way!

Great video Wags, pro tip hit enter rt control so you can show your inputs.

Ah, that was what I was desperately waiting for!

Thank you Wags for this break down. Best damn ham sammie I've ever had.

Been looking forward to these modes. Thanks for the hard work.

Thanks for your hard work! Ive been looking forward to this. Now we just need that FCR. :)

@mapquest681

Жыл бұрын

Amen Bro! It's been out 8-9 months and still no talk of it. It will be a real game changer when it does come out. It must be a real bear to model it correctly. I keep looking for news on the FCR and it's as quiet as a church house on Saturday night.

Thanks Wags for creating and sharing this video

Wags on a friday... The hero we needed!

Thanks Wags, much needed.

Great upcoming updates, thanks

Great work on Apache. Thanks Matt Wagner and the whole team!

Hormel Cure81 hickory smoked ham is THE best ham. Nice video too, thanks!

Is just me or this year 2 modoules are on the way? the CH-47 and the C-130J. They both apeared in a Matt's video for the first time and both of them were key airframes in Bagram airfield.

@DOGosaurus_rex

2 жыл бұрын

Is that the mother of all bombs that I hear? 😉

@OliverMiles98

2 жыл бұрын

They look like the regular AI models, and those Hercules' certainly weren't Js.

@jrsdiesel

2 жыл бұрын

@@OliverMiles98 Agreed, those are likely H models

@justduff634

2 жыл бұрын

The last one is a J model 100%

@LesserPandaVT

2 жыл бұрын

@@justduff634 it is definitely not a J model

Really loving this helicopter

muchas gracias señor wags!

Great work!

Thank you, Sir 👋

This is the greatest idea since the ham sandwich,cheers wags

Awesome. Is there a way to have George use the autopilot in a hover when I'm in the cpg seat and have it stay on when I switch back to pilot. That way I don't have to do gymnastics with the controls when switching back to keep the aircraft under control

@nexus888

2 жыл бұрын

That's an excellent suggestion! I agree that would be very helpful.

@Aphelion79

2 жыл бұрын

@@nexus888 I second this!

@alanharrington

2 жыл бұрын

I can relate: I third it...

Never clicked so fast. :D Thanks Wags!

Awesome cant wait for more on this bird!!!! I wonder what those C130 doing there....

Thank you, this video help me.

Stanley Airport?? Nice!!

Been using Attitude hold for hover for over a couple weeks now. I've went to the bathroom, got something to drink, and come back still in the same spot. It always kept me around 0-2 knots. So does this mean it will bring you to zero knots and keep it there now?

Nice C-130J 👍🏻👌🏼😉

Sincerely, I am here for the map xD

Whats those C-130's doing there at the end? (possible future module??)

Would be great if we can toggle peddle trim like the other helos

Is there a maximum height limitation to the position hold mode?

Looking incredible, impressive job!

Excellent, topmoumoute :)

Yay! More goodness 😊

thx a lot. it's great, but to see the South Altantic map ist even better ;)

Ham sandwich module confirmed! Will be awesome in VR 👌

How do you "Initiate the hold mode" is what I'm after. It looks like the only controls used were the trim switches at 1:40 when the control scheme was pulled up but I already have that set. It doesn't say anything about hovering hold, or hovering, etc., That's where I'm lost.

Alright, i still find the Ka-50 much more intuitive with its auto-pilot modes. But this video made me understand the AH 64D better.

Nice map

when is this coming out for open beta?

Attitude hold works great. Noticed it after the last patch. I wonder how much real pilots use it.

Hey ...Who put that Chinook there??

Now we gonna have some fun

Any news on gunner voice for hind?

PID is one helluva drug.

Wags, on a scale of 1 to 10 - how much do you like ham sandwiches? :P Apache is coming along nicely for the 'rotorheads', awesome work from the ED team. Looking forward to the release of the South Atlantic map myself, can't wait to load it up myself - it looks spectacular.

dont you guys think you should release the video after the feature be release?

@Matt Wagner I curious with your rudder twist, what's you used?

@MattWagner

2 жыл бұрын

A mini-stick.

@EagleSQN

2 жыл бұрын

@@MattWagner interested. looks cool

i advise you wags to test your product with the most popular stick out there, the thrustmaster 1600, apache is unflayable with it no matter what you do or what curves you set.

@rc3754

Жыл бұрын

5 months later. The T16000M FCS is a piece of garbage. The RZ axis is a wreck. I bought LogiTech X52 non Pro as a replacement. Same price, so much better. Get rid of that thing.

Hey WAGS, just got my DOF P6 motion sim chair up and running, I get everything BUT heave up and down with the AH-64, is there missing code on this module for heave signal?????? Beta, multi core .

hello sir wag! when release Auto rudder??

Aha... there are speed windows in what this mode will do... thanks again!

How do you activate that H-B mode, which u can see at the end of the hover showcase?

@ipdjbt

2 жыл бұрын

Down on Symbology Select Switch.

@henrikbonnevier

2 жыл бұрын

down on the symbology switch, if u dont get it the first time do it a 2nd time

@DOGosaurus_rex

2 жыл бұрын

symbology select HB Aft twice I think is what u want

How did I miss this, lol..

Hi , can this hold mode only work at low attitude or can it also work say abt 500 feet and above? Apologies if this is a silly question. I'm learning 😢

@MattWagner

2 жыл бұрын

As long as the controls don't get saturated, it should be fine at any altitude.

@dushanthap674

2 жыл бұрын

@@MattWagner Thank you Sir

I keep seeing Chinooks in these vids... Is Wags dropping not-so-subtle hints? 🤞

Ty

Idk why but the attitude hold mode doesn't really work for me. Whenever I take my hands off cyclic the heli goes in every direction lol

I cant find the HAM Sandwich

How do I turn on the bob-up box?

@MattWagner

Жыл бұрын

kzread.info/dash/bejne/eqGesMyHdNOWeqQ.html

It doesn't appear that the Force Trim reset recenters the SAS in the current beta build, and the only way to recenter the SAS is by holding FT for 3 seconds (or do a complete FMC reset). Is the upcoming patch going to recenter the SAS upon FT reset?

@MattWagner

2 жыл бұрын

Left Ctrl + T

@schoolio64D

2 жыл бұрын

@@MattWagner that resets the force trim, but actually moves the green '+' further away from the trim center position.

@MattWagner

2 жыл бұрын

@@schoolio64D Yes, we are aware. thanks.

Myself and dozens others tried to get this to work and have done extensive testing and once we try these exact methods it completely bugs out the heli and the force trim reset wont work , the force trim wont work , the auto hover at less than 5 knts no matter how stable we were , it just wouldnt work and bugged out the heli into an unflyable state , every time . Is there a future patch coming out that will fix these issues and make it easier to engage and disengage ?

@MattWagner

2 жыл бұрын

It works perfectly fine here and my multiple Apache pilots. Please use our forums for you and your friends to better understand how to correctly use the trim system. forum.dcs.world/topic/295372-force-trim/page/29/#comment-4982196

I really hope there will be some kind of stabilisation system for forward flight at high cruise Speed, cause the apache is rocking left and right like a rocking chair compared to real life helicopters i fly in.

@Aphelion79

2 жыл бұрын

Yeah i noticed that too!! Have you gotten the sudden uncommanded barrel roll yet? lol

@johnloov

2 жыл бұрын

At max speed you are very close to retreating blade stall which will make the helicopter loose lift on its right side and fall. Even small changes in wind, air temperature and pressure as you fly across different areas can make a big difference at this point. DCS might just have to trim the module a bit...

@coRb77

2 жыл бұрын

@@johnloov true, I'm comparing to Bell 429, we flew it at 93% torque yesterday with altitude hold on 1400 feet, reached 140 knots indicated and she was rock steady. Maybe the Apache has lower Vne than the Bell? But still I lack some kind of stabilization when doing normal flight straight forward. I really hope there is a heading and altitude autopilot in the works.

@coRb77

2 жыл бұрын

@@Aphelion79 Yeah, it's so unstable sometimes. Have you tried the UH-60L mod? When you activate all stabilization systems on it, it's very stable on the "wings" during level flight.

Finally.

Great video. Looking forward to these modes. However you are mistaken regarding the realism of one small aspect. Everyone knows real Apache pilots during hold mode eat turkey sandwiches, not ham. 😉

He took a glace at the chinook! the secret helicopter is a chinook! jk

@rhysgoodman7628

2 жыл бұрын

Well I hope it is…

I followed your turorial step by step but I always had one problem: The Attitude Hold would only engage rarily or not at all and i couldn´t activate it reliably. I don´t know if it is my fault or if my game is just bugged. (I think it´s my incompetent self). If someone has a solution for my problem please help me.

@rc3754

Жыл бұрын

1) Force Trim - R/Up. 2) Force Trim - AT/Left. 3) Collective @ about +70% not mentioned in the video. Make sure your mapping is correct, follow the steps and practice. It's not you.

@ghost_md-9973

Жыл бұрын

@@rc3754 Thanks I will try that.

@rc3754

Жыл бұрын

@@ghost_md-9973 I had the same problem until I figured out I wasn't using the Force Trim Release - R / Up Release button. Works great now. Hope you have descent HOTAS too.

The Apache just got deadlier

Are you guys working on a CH-47? Asking for a friend.

Is this out yet or coming soon?

@MattWagner

2 жыл бұрын

Right at the top.

@twifosp1

2 жыл бұрын

@@MattWagner ahh thanks tough to see on a mobile! I was wondering why I couldn't get it to work :)

Eh… Is this new as I’ve been using these modes since day one?

@MattWagner

2 жыл бұрын

Attitude, yes; Velocity only partially; Position, no.

anyone else notice that is Port Stanley in the Falklands?

Trying to be constructive but hoping for some FM tweaks so the helo doesn't spin like a weightless top when making 1 and 2% changes to the power settings near hover. And the sensitivity of the module is such that I have to reduce the percentage of total movement so that when I add some curve "which is a must" it doest bite so hard at the extremes when I do need full movement. If we're all just adding curves and adjusting sensitivity to make it enjoyable "which we are" I guess I'm not sure why the sensitivities are so high. If i had 3 foot wide $500+ rudder pedals im sure it'd be better but i use a vkb twist grib which has been brilliant with every other module and helo i use. Just my 2 cents......I want to enjoy flying not relying on automating my gaming experience. Keep up the great work, dcs has been fantastic as of late.

@Skullizer

2 жыл бұрын

The only axes in DCS i ever use a curve on are TGP/Radar/cursor slew axes, even back then when i used a Logitech 3D Pro 🤷‍♂️ If you have set a huge deadzone for your anti torque axis on your twist grip like i had, try it without. Made it much easier for me. You aren't supposed to release the AT pedals in a helo anyways 🙂

@MAYDAYSIMULATIONS

2 жыл бұрын

@@Skullizer I don't use deadzones, Thr hind and huey work great. It just seems obvious when you add 10% lift from the ground and the apache starts spinning on the pavement with the brakes locked something is askew. It's early access and it's just my 2 cent. It's not horrendous.

Tried, doesn't work. Got into a perfect hover, resetted the Force Trim, still perfect hover, now Force Trim/Hold mode LEFT, let go on the controls .. helicopter drifts away spinning clockwise until it crashes. If i don't reset the trim heli drifts away just without spinning and crashing. P.S. Open Beta updated to 2.7.12.

@MattWagner

2 жыл бұрын

As stated at the top, "Coming Soon".

@krusty1974

2 жыл бұрын

@@MattWagner upsy! I missed that. Sorry.

Nice presentation, wish mine didn't wanna kill me all the time 😒

Man I need to get back into the Apache, Nioh 2 has me sidetracked hah

Looks like the Falkland Island Early Access release is imminent. 🤣✌

You can do all sorts of fun things like eating a ham sandwich. At the exactly time I was making a ham sandwich!

3:13 HAM SANDWHICH MODULE CONFIRMED!

ITS MAGIC BUTTON

Wags do you not get lunch breaks? You seem to always want a ham sandwich ;P

Looks way easier than the mi 24

@DOGosaurus_rex

2 жыл бұрын

is the mi24 harder to get into autohover than the Ka-50?

@OICWSephiroth

2 жыл бұрын

@@DOGosaurus_rex sure, Ka50 is the most easy to fly helicopter on DCS by far

@akipovakipov8240

2 жыл бұрын

@@DOGosaurus_rex ka 50 for sure 100%

Ok- I don't recognize the map wink wink nod nod! Thank's Wags!

no wonder I cant get these to work lol "Coming Soon"

Next stop: FCR...

@redl5705

2 жыл бұрын

How much i wish haha

Hercules on the left… hmmmm

@rhysgoodman7628

2 жыл бұрын

Chinook and Hercules. Certainly interesting. But the Chinook is definitely more significant.

@rhysgoodman7628

2 жыл бұрын

But I suppose both are relevant to the map, so maybe not.

@Avenger31

2 жыл бұрын

@@rhysgoodman7628 maybe, but i will be ok with hercules as a first transport aircraft in dcs.

@rhysgoodman7628

2 жыл бұрын

@@Avenger31 yeah a Hercules would be awesome, but heavy-lift helicopters would be better IMO. They do they same job but are inherently more challenging, which makes it more incentivizing to play. At least in my opinion. Maybe if we ever get a super large map or maybe even the whole world, we could get a C-17. Though that is a huge “if”. Because the C-17 has a stick, much like a fighter, which is very unique for an aircraft that size.

@rhysgoodman7628

2 жыл бұрын

@@Avenger31 but a Herc and Chinook/Stallion would be so damn cool!