Good job, better than mine.

@nymerie

2 жыл бұрын

Is it possible to tell George/Petrovich to prioritize targets? Sometimes I want them to look for AAA's first, but they keep going for some trucks or infantries when dozens of targets are available.

@cagneybillingsley2165

2 жыл бұрын

the biggest problem no one on youtube or the forum touches upon, is that the first laser detent doesn't work for guidance, you need to map the lase key to the second laser detent then hold it for the missile to track.

@620crazyman

2 жыл бұрын

@@cagneybillingsley2165 Pretty sure Wags goes over this across multiple videos. Might need to re-watch his video on Hellfires when he talks about LOAL and LOBL modes.

@ipdjbt

2 жыл бұрын

@@cagneybillingsley2165 If George is lasing it doesn't matter how you have the laser mapped.

@Halozocker104

Жыл бұрын

​@@nymerie for george im almost certain he already focuses on the biggest threat. When i have a group of armor ahead and a single aaa or sa15 somewhere in said group george always goes for the airdefense assets first. Dont know if he makes diffrences between diffrent units but the types seem consistent.

After you destroy your first target, press long back on the George AI Helper and George will automatically re-search the same area.

@keithhudspith5245

4 ай бұрын

I was wondering about having him rescanning

I LOVED the “I’m not Scott Manley, fly safe!” Hahaha, well done!

@simoncampbell-smith6745

28 күн бұрын

They do have similar accents, tone, cadence and delivery. If we should face a world ending disaster it would be good to have Manley/Maverick to make that final broadcast. "Well that's it ladies and gentlemen, go make a cup of tea, be with your loved ones the end is here good bye and god bless." Calm and reassuring prior to oblivion.

I have a quality of life tip that no one seems to talk about yet. After you've gone through the process of having George find targets, after you fire on one, you don't have to look for them again. If you press and hold interface down (unslave) for 1 second then release, George will automatically look at the previous area and bring up the target list again. Allows you to acquire targets in the area and fire with ease. 😁

@FooshMan

Жыл бұрын

Omg, how did I miss this, trying it tomorrow 👍

Thanks - so much simpler to understand than the overload official tutorials. And you didn't refer to a load of acronyms which is confusing for noobs.

5:22 To select another target use long press down and the list of targets will show again.

@104thMaverick

2 жыл бұрын

Thanks Miller, great tip

@onmydate

2 жыл бұрын

Nice one Miller, that speeds things up heaps!👍

I’m an AH-64D aviator, so if there’s any questions feel free to ask.

IF You up long for George he will turn green and he will engage all the targets one after another. Also down long will bring the list back up again.

@chadvader974

2 жыл бұрын

GOLD! THANK YOU

That hover though

@flow3r298

2 жыл бұрын

fr im at a lose for words

@sosagegaming2193

2 жыл бұрын

Was thinking the same, Rock Steady Eddie. At first, I actually thought he was on the deck until I noticed his Alt readout.

FIRST! - As an idiot myself, I find these guides quite helpful 😁

This was exactly what I was looking for. As others have said, you explained exactly what needs to be done in a clear and concise way. Well done. You have a new subscriber. Looking forward to mre DCS Apache content from you.

So much to learn and without brilliant videos like this, I would be pulling my hair out. Brilliant matey - thank you!

I was looking for this exact video for a while! Great tuto thanks 👍

I'm not Scott Manley 🤣

Straight to the point with no BS. I like it. thank you.

Thanks a lot. Never understood the VID setup. Your video is the best I have seen for explaining this.

@104thMaverick

Жыл бұрын

Glad it helped, thanks for watching

This is what I need. Not some in depth analysis on every system - give me the basics and Ill dig into the systems when I'm ready

Great vid, nice and steady there Mav. Impressive.

This was so HELPFUL!!!!!!! Thank you Maverick!!!!

Enjoyed this video. Very clear instructions. I can highly recommend it as a tutorial. I look forward to trying this out especially as I am one of the idiots from the title. Thanks Maverick.

This video is the BEST ACACHE VIDEO EVER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

One of the better videos I've seen! Some of the other videos I've watched assumes that I've been to the US Army Helicopter School in Alabama. This video is actually made for gamers!

I've been struggling. You've just helped me a lot. Thank you.

@104thMaverick

2 жыл бұрын

Happy to help!

Well done my friend your Video cleared up some things I was doing wrong tried it out this evening and hay presto got my first few kills thanks mav see you in the skies. Shack them up !!

Great vid Mav (as usual) 👌

@104thMaverick

2 жыл бұрын

Appreciate it, thanks man

Not scott manley cracked my up haha, you do sound similer. You sound identical to scottish koala though

Very nice video Mav, thanks

Brilliant. This is worth a like an sub.

Great video. Simplifies what seems a complicated procedure. More of the same please. Thank you.

@104thMaverick

2 жыл бұрын

Cheers mate

Concise tutorial, thanks. How you kept the Apache at a stable hover state is quite intriguing to me. I will be all over the place if it was me. My warthog stick is not corporating with me flying the Apache. I have reduced the X saturation and played with curvature and still a challenge.

just what was needed... nice one!!

@104thMaverick

7 ай бұрын

You’re welcome mate

Thanks, very helpful. Got rid of a few confusions I had 🤣

@104thMaverick

7 ай бұрын

Glad it helped!

Thanks This was so HELPFUL!!!!!!! Very good Tutorial

Man is hovering at 69%. Nice.

Maverick, great vid…really like the way you explain the process so there is are questions…now please do it for Apache everything! (If you have the time…Thx!)

@bobr8766

2 жыл бұрын

Suppose to say “no questions”…my bad…sorry!

Niceley done mate! S!

It's important to note "YOU" as the pilot can also fire the Hellfire. From the point in which you have George lock on and select a target you then must WAS up the Hellfire yourself after that everything else is the same only you press and hold gun trigger second detent instead of consent to fire. You have him find a 2nd target after lock on you must was up the missle again. This is the method I use. I enjoy much ripping them off the rails my self lol.

Really helped me. Thank you.

@104thMaverick

5 ай бұрын

You're welcome!

Fantastic!! Please can you do a similar video for the cannon operation?

Fantastic Bro! S!

thanks you, very useful ! Well Done 👍. As always 🤩

@104thMaverick

2 жыл бұрын

Thank you! Cheers!

Lots of help Thanks

@104thMaverick

2 жыл бұрын

You’re welcome

Appreciate the succinct summary of how this works! No offence to Wags and Casmo but this is a great explanation for those of us with ADHD.

@ryanhooper4660

2 жыл бұрын

And now I'm putting missiles down range and hitting targets... well George is doing most of the work. Thank you again sir!!! 👏

Thank you very much.

Thanks for putting this together. Well done as usual.

Thank you very much for your video!

@104thMaverick

Жыл бұрын

You are welcome!

Does anyone know how to make a proper LOAL shot with george as the CPG? I cant get LOBL direct to work, but I cant seem to get him to actually store, and fire on, target points in LOAL.

Best and easiest guide yet!

@104thMaverick

2 жыл бұрын

Glad it helped!

Very helpful! Thanks.

@104thMaverick

2 жыл бұрын

You're welcome!

Great video Mav. Would you consider sharing your axis setup? Curves and/or Saturation settings? I'm using a Warthog (no extension)

@104thMaverick

2 жыл бұрын

Hey brother sorry for the delay in getting back to you. Collective - No Curve, no deadzone Cyclic Pitch - Curve 10 - Deadzone 3 Cyclic Roll - Curve 10 - Deadzone 1 Rudder - Curve 10 - Deadzone 3 I dont change / use any saturation on any of the axis.

Very helpful , thanks

@104thMaverick

2 жыл бұрын

Glad to hear that!

Thanks a lot! 👍

Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.

@joshprout1726

2 жыл бұрын

The active pause function. Can use it with any module to get airborne and play with systems

Really helpful, can you make another exactly like this again but for LOAL with George firing please.

For me, hovering this thing is a TOTAL pain in the ass. I have no issues with any other heli in game but this thing is a flat bitch. SOOOOOO wish we had an auto hover with all the shit you have to do to fire a weapon

Top gun and volley ball, I'm not Scott Manley. Fly safe 🤣🤣🤣 freaking dead!

How did u remove eye sight border circle

Nice Video

@104thMaverick

2 жыл бұрын

Cheers Andy

Nice clear explanation, do you have one covering use of Hellfires when playing in CP/G role, (with George ai as pilot)?

@104thMaverick

2 жыл бұрын

Not tried it yet my friend but once I get round to it, I'll knock something out

Great vid. How did you keep such a stable hover?

@104thMaverick

2 жыл бұрын

I've been flying Heli sims for years brother so I have a lot of practice in them.

thank you very much.!!!!

@104thMaverick

Жыл бұрын

You're welcome!

If you want George to "rescan" the original scan, hold down "S" = George AI Helper down. Saves having to reticule and pressing "W" repeatedly.

Ah yes, I'm the idiot this is aimed for :D

@104thMaverick

Жыл бұрын

I believe in you!

@cutlass6332

Жыл бұрын

Shiftie had to help me as I had ACQ on fxd oops!

I have a question. How do you choose the longbow version with the radar above the rotor???

@104thMaverick

Жыл бұрын

It’s in the mission editor under the advanced waypoint actions section. It’s the last tab on the right hand side, you need to untick the box labelled FCR Remove

What about LOAL mode?

Nice and easy…is it possible to change the CPG sensor from FLIR to TV from the pilot location?

@104thMaverick

2 жыл бұрын

I’m not sure Jay sorry

MAVERICK! good video What device do you use for your anti-torque? its so damn smooth

@104thMaverick

2 жыл бұрын

I use the twist on my Virpil Constellation Alpha stick brother

@ernestwinslow7316

2 жыл бұрын

@@104thMaverick I am guessing twisting and trimming at the same time would be a challenge if you have trimming on the stick too.

You're zooming up and zooming back is very smooth in your transitions seeming to stop wherever you want, can I ask how you have that bound and how are you are using it? Basically your user interface action for the zooming.

@104thMaverick

Жыл бұрын

I have "Zoom In Slow" and "Zoom Out Slow" bound to two way switch on my throttle

@WilliamDeanPlumbing

Жыл бұрын

@@104thMaverick wonderful I'll look into that option.

How do you hover so beautifully? 'cause as far as i know, there is no autohover mod... Even when trimed, i have constante mouvments and/or altitude changing... (sorry for my bad english)

@104thMaverick

2 жыл бұрын

I’m a trained desktop professional my friend 😎😝

Sureeee Scott Manley

Hi there, I have a small problem, I don't get that dotted cross over the targets George is locked on to, I can see it on the MFD what target he is locked onto and lasing but not on the IHADSS. The dotted cross is inside that rectangular dotted box that is just over the cross at 3:08.

@104thMaverick

2 жыл бұрын

Go to the WEAPONS page and in the bottom right select your ACQ (Acquisition source) to TADS

@Topper_Harley68

2 жыл бұрын

@@104thMaverick Nice, thank you :)

@104thMaverick

2 жыл бұрын

You’re very welcome sir

What I’m really interested into is how do you manage to settle such stationary flight ? 😱 Using FTR mine is always too much or too little 😰

@alheeley

2 жыл бұрын

@Eric Mollenthiel I find Lwin+Pause helps a lot in SP to learn the ropes ;)

@JoJo-vm8vk

2 жыл бұрын

OK, with a little bit of practice I'm starting to get the hang of it. 😇

@veteran35th

2 жыл бұрын

30 (yes thats thirty) curves on anti-torque pedals (same as Casmo) and 20 curves for roll on the cyclic. Yes, as a long term heli flyer in DCS, I've never had to put so much into curves before but with these settings I'm nice and smooth.

@ernestwinslow7316

2 жыл бұрын

@@veteran35th I get the feeling. At this point, the KA-50 is way controllable to me. I wonder if the Apache really has the SCAS system working. For the me the damping effect is weak. Or perhaps it is my control stick.

One question I had was how are you are hovering so steady if you're the pilot whilst doing this? You seem to be hovering like a pro.

@620crazyman

2 жыл бұрын

At first he's in Active Pause mode. When he unpauses he uses Transition mode to view his accelration cue (little circle) and light movements on his joystick to keep the ball centered.

@104thMaverick

2 жыл бұрын

I am a Pro brother 😝😎

Can someone help me as when George has a target locked up I can see it on the tads but my + is stowed in the little box on the hud so I can’t see where the target is

@104thMaverick

2 жыл бұрын

Go to the Weapons Page and make sure TADS is select at the Acquisition Source. Check bottom right where it says ACQ, click that and select TADS

@haggis2403

2 жыл бұрын

@@104thMaverick thanks mate. Got it.

Is it possible to fire rockets or shoot the guns.. without George.. just staying on the ground, not even turning on the propeller?

I am having trouble getting the CPG sight to overlay the target in the IHADSS. It just sits in the diamond and never moves. Anyone got any advice?

@620crazyman

2 жыл бұрын

If you're trying to get Geroge to target something the George AI Helper panel must be open the entire time for weapon employment

@jasons9564

2 жыл бұрын

@@620crazyman Targeting is fine. I just can't get the cross on the IHADSS to move over the target. I've only done cold starts so far, so I wonder if I'm missing a step?

@620crazyman

2 жыл бұрын

@@jasons9564 Try setting your acquisition to TADS on the TSD.

@jasons9564

2 жыл бұрын

@@620crazyman That was it! The acquisition source needed to be set to SKR. No more fratricide for me! Thanks dude!

I'm not getting a large square :( hellfires not tracking...weird)

Great explanation! Can George be used as the CPG in multiplayer?

@104thMaverick

2 жыл бұрын

Yes my friend

@ipdjbt

2 жыл бұрын

@@104thMaverick Your instructions were so spot on my slow ass was successful. Thanks man!

When you say to look at the flir to check your target and you can see an enemy tank. I literally could not see anything and I can never see anything when I'm in the apache either. I've always had trouble finding targets in a tpod like screen. Frustrates me no end.

Pls make more AH64 tutorial

How are you in such a rock solid hover?

@104thMaverick

2 жыл бұрын

Practice and fine adjustments brother

@wmouse

2 жыл бұрын

@@104thMaverick Fucking professional

@glenharris9710

2 жыл бұрын

@@104thMaverick just ordered me some MFG crosswinds cause my old crappy pedals wasn’t doing the job. Getting better.

Is any one else having the bug where the apache won't pitch the rotor forward enough to even taxi forward no matter how far the cyclic is pushed forwards??

@104thMaverick

2 жыл бұрын

No brother, not seen that.

@rob7566

2 жыл бұрын

@@104thMaverick great it works fine in the training missions just not in the instant action or missions

@ernestwinslow7316

2 жыл бұрын

@@rob7566 Never had that issue. You might want to have the control indicator up and check if cyclic control is well centred. If I understand this correctly, looks like the newly introduced white box on the control indicator indicates the limit of the SCAS system and beyond a certain point it the stick will not move further.

@rob7566

2 жыл бұрын

@@ernestwinslow7316 scar? Is that the small Gray/white boxes around the control indicators that themselves have green indicators inside them? And if so how can I get rid of them? Btw thanks for the helpful comment 👍

@ernestwinslow7316

2 жыл бұрын

@@rob7566 I am afraid this is hardcored and cannot be removed. Just by the chance, before taxing, is your parking brake level released? Normally if you increase collective to about 30%, have the parking brake released(pushed inside), move the cyclic forward, the Apache would taxi or move forward. Also check from the control indicator display that all axis are centered. I hope these help.

You need to do all the training videos for ED. You don’t talk too fast, explain it well, talk plain. Thanks

Good video, but the problem with george isn't simple training scenarios like this. It's in more "real world" scenarios where his lack of IFF and vague target descriptions becomes a big problem. He also always seems to use FLIR, which can make daytime VID pretty difficult. Obviously it's the first week of EA and it's being iterated, but just saying. Try this with one of the Rotor Ops scenarios and you'll see what I mean.

Thanks. Idiot question: can we fire from the pilot position?

@104thMaverick

2 жыл бұрын

AFAIK no brother, boom sticks are a front seat only thing, back seat gets Rockets and Guns.

@veteran35th

2 жыл бұрын

Yes you can. WAS the Hellfires and you're good to go (tested with a human CPG who was unable to see that we had Hellfires equipped, so I did the trigger pulling). Don't forget that trigger protection though!

@veteran35th

2 жыл бұрын

@@104thMaverick You can with a human CPG. If you WAS the Hellfires it should let you fire them. Don't forget your trigger guard though.

Does not work for me. George find target but he dont lock on him. Also target list on left is in red colour and i dont know why. Your target list is in white.

@104thMaverick

Жыл бұрын

When it’s red that means that George has identified the target as hostile

@Elcicikos

Жыл бұрын

@@104thMaverick Hmm. Static apc as hostile.Btw nice tutorial.

Are you tactical pascals in disguise?

@104thMaverick

2 жыл бұрын

Ha no! We both come from roughly the same area in Scotland tho

im not Scott Manley is legandary :D

You. Do sound like scott

The George interface vehicle list is not very intuitive in VR. The list is too far down.

George dosn't want to fire when i press the consent button :(

@104thMaverick

8 ай бұрын

You’re probably too far away for George to fire mate, make sure you are within 8000 meters of

@xYoshiLP.

7 ай бұрын

@@104thMaverick i got him to work now (range wasnt the problem anyways) ONLY that this problem still exists, no matter what range, after i've reload my set of Hellfires without Turning the Heli off...🤔 which is a bit weird but fine by me

George is cool, but slow. A good real CPG can take out multiple targets with 15 seconds of each other.

☺️ ᴘʀᴏᴍᴏsᴍ

Nice, very well explained. Thanks.

@104thMaverick

Жыл бұрын

Thank you, glad you think so

Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.

@kaitmmvi1744

2 жыл бұрын

he has active pause on mate

@ernestwinslow7316

2 жыл бұрын

@@kaitmmvi1744 Huuuum! I was so fascinated by that steady hover.