Great video! I was hesitating on 103 vs 80 and after watching this I ordered a 80HL. Tight lines! 🎣

Thanks for the review. I have enjoyed my Tatula TW 80. I can say I have not noticed that loud casting noise with mine. I ordered it from Japan Lure Shop.

There are many complaints about Daiwa reel bearings coming from the factor with dry bearings, likely leading to the buzz you are hearing on the cast. I small drop of oil usually fixes this.

@TTangOutdoors

Жыл бұрын

My Tatula 100 CT came in dry and I didn't realize that was a thing as it was my first baitcaster. Later I oiled the reel and it felt so different and so much smoother on the cast and retrieve.

Just ought 2 Tatula sv tw103's. One made the screeching noise so I put a drop of oil (Weapon Shield) on each bearing. Now it's silent and seems to cast better than before, especially lighter lures.

Essa barulho que a Tatula 80 faz no arremesso vi em um vídeo resolvendo ele com a retirada de uns 10 metros de linha do carretel, deixando ela com menos linha do que o habitual. Isso resolveu o barulho no arremesso.

Thanx fo video! I think, for FINESSE REEl is better DAIWA TATULA TW SV 70 or DAIWA SALAMANDURA TW SV 70.

I have the tatula 80 on a blazon mh. It's my all time favorite combo. I also own a jdm zillion sv tw 21 also on a mh blazon but I find myself using the tatula 80 more.

I can’t wait for the new Daiwa 22 Salamandura SV TW 70, is on the way to me from China

I've had the 80 for about a month from Japan and was getting the same exact noise after a week from heavy use. I took it completely apart lubed, greased it and its quiet and runs smooth now. Seems like they come dry from factory.

@hunterpro48

2 жыл бұрын

Did you put oil in the bearings too or just grease the gears? Thanks

@MegaRob323

2 жыл бұрын

@@hunterpro48 cleaned everything from scratch and then greased plus lubed.

@THEREELTEST

2 жыл бұрын

No consumer should have to do this to a brand new mainstream reel.

@C0ldB3er

2 жыл бұрын

@@THEREELTEST What is a ”mainstream reel” lol?

@Ggorazzi

3 ай бұрын

​@@C0ldB3er reels that you use on the main stream.

After I broke down the 80 and lubed the gear/oil the bearings the casting noise disappeared.

The loud rattle sound comes from your spool being too loose. Just tighten the zero adjust by a tiny bit.

Between 80 & 103 tatula what do you think the most backlashes control & prevention regarding these two breaking reels?

Hi, sorry for getting off the subject. I just ordered two of the Shimano 17 Exsence DC XG left. I got the two reels for little over $900. I feel like I over paid. I see other Exsence dc reels for around $300 each. Did I over pay for 17 Exsence DC for $900 for two reels?

I want to see a tatula 80 vs curado 70 cast battle since they’re both very popular reels for jerkbait fishing

Do you know what type of bearings are used in the Tatula 80? I cannot find any information about this on Daiwa official websites.

Any idea if the Tatula 80’s pinion has dual bearing support?

Congratulations for the great videos and the channel. I accompany you here from Brazil. In your opinion, which is the best baitcasting reel for baits from 1/4 oz to 1/2 oz?

@THEREELTEST

2 жыл бұрын

Metanium MGL

@livinglife3230

2 жыл бұрын

The jdm model w/o a doubt. Can be had for under $250

Hauled in my PB with that same bitsy bug with a rage crwal chunk, 11.7lbs hoss smoked it on a laydown

@THEREELTEST

2 жыл бұрын

caught my 1st jig bass with a bitsy bug :)

Amen brother

Just got into fishing this year for personal reasons, my first baitcaster was the Diawa Tatula CT 100HS. I love it, my birthday is coming up and asked my wife for another baitcaster setup and was thinking of another Diawa or Shimano. Any suggestions?

@Plee92

2 жыл бұрын

Metanium mgl

@THEREELTEST

2 жыл бұрын

Scorpion DC is a nice reel for a special occasion for a bday present

@DotQB1

2 жыл бұрын

Thanks I will have to look them up

@jurepeternelj

Жыл бұрын

Already have daiwa,why not try shimano

maybe after lubricating both tip of the spool, the noise will be reduced

I have Tatula 80 I caught a nice 6.89 lbs largemouth/spotted bass.😊

@rloera601

Жыл бұрын

Go to my channel

did lubing it help?

How does SV compare to the new 2023 tatula tw 100?

About loud sound on cast: i think that mono, which you use is too hard. Can you try it on soft fluorocarbon or PE line? I saw it once on another Daiwa's reel.

@THEREELTEST

2 жыл бұрын

Not the mono.. this mono I use is the slickest mono in the world.. it feels like it has oil on it. The SV was quiet using the same mono

@bgfjb1995

9 күн бұрын

That makes no sense lol the mono he uses is too hard? 😂 mono is softer than any fluoro ever made and definitely quieter than braid. That noise was dry bearings but he doesn’t believe you should have to oil or grease a new mainstream reel. And the spool being a little too loose but Daiwa puts the tension exactly where it’s supposed to be on every single zero adjuster reel they ever make evidently.

Sorry this has nothing to do with this episode but, I am in the market for a Tranx 300 or a Curado 300 k for large swim baits and A-Rigs. With the JDM at killer deals right now, Do you know an equivalent in the JDM world that would compare to either of these two reels? Thanks,

@THEREELTEST

2 жыл бұрын

yes, the Grappler 300

I think that your casting videos would be better if you could include dron fotage from above while you cast if this tiny lures could be visable from the dron offcourse.

Good 👍

Clicking drag on the 80?

I bought the "right" version of baitcaster reel last year when I made the move from fishing exclusively spinning reels, and now I have to switch hands after every cast too. It would have been very helpful if it had been mentioned somewhere in the item description that right-handed anglers should purchase the "left" (crank mount orientation) version to avoid switching hands. Buying too close to the departure date for my fishing trip left me unable to return the reel for exchange. It's not the end of the world, but it seems like a mistake that more people than just me have made. On the bright side, when I'm fishing with my bros, I am often in a spot on the boat where it's more difficult to get a cast off fishing righty (and still fish the shoreline). So, as I improve my lefty casting, I end up with more versatility than before.. but I seriously doubt I'll ever be as proficient casting lefty as I am righty.

@walden6272

2 жыл бұрын

Most people cast with their right hand then swap to holding the rod with left hand. Of course if you buy the leftie version, you don't have to switch hands.

@BassManStrikes

Жыл бұрын

@@walden6272 more and more people are getting wise to the old hand swap dance.

What rod were you using?

@DrDitchpickle

Жыл бұрын

Nevermind lol. Just saw the end

no such casting noise from my 80, been using it for awhile now.

JLS has a very good price on this reel now. I'm waiting for your review and test on the 70 SV ..... that terrible sound !!!!!

@THEREELTEST

2 жыл бұрын

sorry man, not planning on getting the 70 SV

@thedarkmittetoast7967

2 жыл бұрын

@@THEREELTEST Maybe others will, ...

Which one do you think has a better distance?.please answer me

I've got a tatula 200 that sounds just like this. Bugs the crap out of me.

what Rods are you using

@thedarkmittetoast7967

2 жыл бұрын

Looks like an Ali Express Rod, I saw one that resemble to his one, I don't remember the brand.

@THEREELTEST

2 жыл бұрын

just some budget Aliexpress rods I got just for testing finesse reels

I like the reviews, but these test would be a lot more accurate if done on land with yardage marked off. By casting in a lake or pond everything is guesswork. All around better reviews with the most accurate information possible. As far as noise I believe you may have a bad reel.

@THEREELTEST

2 жыл бұрын

you must be new to this channel kid

@michaelflowers6048

2 жыл бұрын

No kid I have been watching it for a while

@livinglife3230

2 жыл бұрын

@@THEREELTEST 🤣🤣🤣

Do the 80 and 103 have the same spool size and can be interchanged?

@THEREELTEST

Жыл бұрын

no

It is not just the Tatula 80 that has some bad bearing noise out of the box. I recently purchased two new 100HSL's and they each developed that noise after a the first couple of days, I oiled the bearings and put a little grease on the main gear and it was much better. But being on my 7th or 8th Tatula I as surprised by this.

@THEREELTEST

2 жыл бұрын

Thanks for the info

Cast ,casting plugs not lures.

Giftme free tatula 80 bro😊

Hey want to know why you get no views per video anymore?? Because you keep doing reviews on dumb diawa and cheap crap reels why don’t you buy the new Antares dc 21 or that new slx dc then You would definitely get more views and likes on a video like that make some sacrifice man it will be worth it In the end

@titaniumcrayon3090

2 жыл бұрын

Dude wtf are you on about? He can do whatever he wants. Some people make videos on things they enjoy and not just what gets views and likes.

@andersbomortensen757

2 жыл бұрын

@@titaniumcrayon3090 good answer 👍

@Fishermens_Vue

2 жыл бұрын

You should make a sacrifice by not commenting at all. We’d all appreciate that. Thanks in advance.

@THEREELTEST

2 жыл бұрын

Maybe one day I can have a channel with as many views and subscribers as you LOL

@livinglife3230

2 жыл бұрын

🤡 🤡 🤡