How much power will she make @12PSI?

@TURBOTRISTO

5 ай бұрын

149.7kW

@Senior_TJ

5 ай бұрын

145kw

@toddxhiggins

5 ай бұрын

139.5kw

@darrenbrown6880

5 ай бұрын

140kw+ I've seen guys make ~120kw on pump fuel at around 8psi

@taylor_production_studio

5 ай бұрын

139.7kw

An in-depth wiring video about how you tackled this would be awesome to see man, and I'm sure it would play a big role in getting other peoples projects on the road including my own! Loved these videos so far so please keep up the hard work!

Hopefully the head stays on don’t add timing add boost and it will be fine

What a quality video, a time capsule for sure for you and your family! Sons reaction is the best!

@JCYT

2 ай бұрын

Thank you for the kind words! The boys absolutely love watching themselves on TV! Hahaha

Absolute animal!!

Love the son's reaction cam lol

@JCYT

3 ай бұрын

Thanks! He loves it to this day!

Hells yeah 👌🏼 1000kw

@JCYT

4 ай бұрын

hahahaha surely

Nice family and video 🫡 Honda ftw

@JCYT

4 ай бұрын

Thanks mate!

Super keen to see an in depth step by step and practical video on how you wire a standalone ecu for the D16.

@JCYT

Ай бұрын

Hey mate Video will be up next week! It's super in depth

@taylor_production_studio

Ай бұрын

Bloody amazing! Really appreciate the hours you put into your content. Hope your channel takes off.

@JCYT

Ай бұрын

Hey mate Videos just gone up. Good luck

@taylor_production_studio

Ай бұрын

@@JCYT Cheers Ill give it a watch. I'm keen to turbo my D16 at some point also. Thanks alot keep up the videos!

Love your setup bro! i’ll be doing the same 🔥

@JCYT

4 ай бұрын

Cheers mate! Good luck with your setup

🔥🔥🔥

@JCYT

4 ай бұрын

Thanks mate

Sorry asked the question about the pinout before you mentioned that you are going to work on that lol

@JCYT

4 ай бұрын

Next few months i'll make a detailed video on how to make the patch loom

Would be interesting how U did the ECU harness... It looks great so far...☺

@JCYT

4 ай бұрын

Give it a few months, i'll have a video up, a detailed guide on how to make a patch loom for D16 obd2

@ess_onthebeat

Ай бұрын

Following! This would help out dearly 😅 thanking you sir

I need to put a turbo on mine I got the sexiest d16 engine bay in all off Sydney all she's missing is a turbo she's getting the head rebuilt so she well deserves it been running haltech with nice air induction and skunk throttle body and manifold best exhaust pops and bangs and shoots flames she's been tuned running on 98 fuel she makes 98kw turbo Tristan where you at hahaha need you I'll be your best friend for ever I'm thinking off getting a already tapped sump from America couese I know thats the hardest part and im no mechanic but I'm sure if I can get the sump I'll be all good for the rest but some pointers would be good

What turbo setup are you running? Sounds FANTASTIC!

@JCYT

4 ай бұрын

It's my own custom kit kzread.info/dash/bejne/lp2m2NalZ93Ofaw.htmlsi=bUaI4e2GTlqeltzA

Can you upload your basic map? that would be awesome!

@JCYT

4 ай бұрын

There are reasons why and sorry i won't be sharing my own map. But it is very easy to create your own base map on the D16 Maybe i'll make a video on it to get everyone started

128kw :))

Hi Jonathan, Could you please make a video on how u wired up the haltech elite ecu, im building a d16y4 tubo and i have no clue how to wire up my haltech elite 750

@JCYT

4 ай бұрын

Hi mate Video is in the works. Due end of April i'd say

@JCYT

Ай бұрын

Hi mate I know its been a few months but video is up

@Fransee23

Ай бұрын

@@JCYT thx so much Jonathan ur one of the best KZreadrs out there man, I might have to just buy the harness from u since i just don't trust myself with the wiring process. Thx for influencing me to keep up w the d16 turbo build!!

Any chance you can show the ecu Pinout ? Or can share a copy of it.

@JCYT

4 ай бұрын

Hey mate I've not known any Honda motor which won't handle 5-7psi For how long though is a different story and one i haven't found out

Hi jonathan as you said that you are making a wiriing video can I follow it for my haltech 750? I realised you said you have the 550 will the wiring be the same? And also do you know if the 750 can run ac because im keeping ac in my build and i need it as it gets hot here in Perth.

@JCYT

3 ай бұрын

Hey mate Yes 550 and 750 same wiring harness. Give me 2-3 weeks the video will be up. Yes 550 and 750 should have enough for AC I have confirmed with haltech

@Christian-ml5pw

3 ай бұрын

@@JCYT awsome, i also have another question since i havent installed my ecu yet i was wondeing if it would be ok to drive the car on stock internals and ecu, the car already has the tubro installed, not trying to fully send it or anything just daily drive it until i install the ecu.

Hey John can you send me the spreadsheet for the pin out specs? It would be greatly appreciated to many people in Australia trying to turbo civics 🙏

@JCYT

4 ай бұрын

Hi mate Please be patient, i am working on it as soon as i can especially with the response i've had. The spreadsheet is not ready for public release. There are still a few things like idle control and vehicle speed to add to the harness. Give me 2-3 months. There will be a detailed video on it.

@zenith9671

4 ай бұрын

@@JCYT all good thanks!

Do you have links to everything I’d like a set up like this

@JCYT

4 ай бұрын

Hey mate check out part 1 of this series - kzread.info/dash/bejne/lp2m2NalZ93Ofaw.htmlsi=bUaI4e2GTlqeltzA

243whp 😁 on e85 or 211whp on pump gas 93

What kind of tires are you using

@JCYT

4 ай бұрын

My street tyres are Nankang AR-1 (just some old track tyres) My race tyres are Advan A050

How many wheel kilawatts is it running?

@JCYT

4 ай бұрын

In the latest video, we made 135kw tuned on the dyno

What turbo are you running sounds like a jet!!

@JCYT

4 ай бұрын

Hahaha it does hey Pulsar GT2860RS If you go back a few videos, i show everything in depth.

Nice car I guess but a budget k swap makes more power all motor and is definitely much quicker then a turbo d even making 180 kw plus ! My stock k 24 made 159 kw !! All motor don’t waste your time on a turbo d for it to blow go the right way !!

@lesterguzman9610

5 ай бұрын

In no world is a k swap cheaper than a turbo kit ecu and fuel management

@dominicjeanb2063

5 ай бұрын

A turbo d is whippin a stock k swap man

@JDATWAY

5 ай бұрын

turbo d16s can do 250 with stock internals but thats about it thats the thresh hold

@Shreddylife

4 ай бұрын

Wrong and wrong lol I built my bottom end on my d16z6 and boosted it for under 3k... It makes double what a stock K series makes now..

@JCYT

4 ай бұрын

I have to respectfully disagree having built 2 kswaps with k24a3 A truly STOCK k24 does not make true 159kw. Been there done that.

What's the mpg?

@JCYT

2 ай бұрын

Terrible! It's about 19-20L/100km

169 kw

@JCYT

4 ай бұрын

No problems Happy to do one

What Headunit is that

@JCYT

3 ай бұрын

It's a Joying headunit I have a video on the fascia conversion if you wanted to check it out

@Diu1-

3 ай бұрын

@@JCYT will check it out thanks

@juanguerrero6581

Ай бұрын

eBay’s got them for cheap

Elite and still dizzy ??

@JCYT

4 ай бұрын

Correct. A factory dizzy exceeds my goals at the moment. That said, be good to see how reliable the oem distributor will be with boost.

200-250hp

@tydaysa

4 ай бұрын

Maybe like 238 😂

Less then my skoda

@cgrschannel7256

4 ай бұрын

😂😂

@JCYT

4 ай бұрын

hahahaha

150kw easy