con todo bro 🔥

@underestimatedgarage

Жыл бұрын

gracias carnal

Nice job l have eg6 turbo swap h2b

@underestimatedgarage

Жыл бұрын

im going to end up doing d2b 🤘🏼

Wait a second, you rattle can that engine bay in your yard??? What paint did you use???? OMG!

@underestimatedgarage

Жыл бұрын

i used rustoleum Satin black but no primer i used two cans of clear coat & i added my own flake by hand

Is your engine still doing ok, what boost are you running. Ive been told multiple times that everything above 15psi would eventually break the crank. Have you a dyno sheet ? Thanks in advance.

@underestimatedgarage

Жыл бұрын

i should be doing doing in a few weeks ive have my boost cut on at 10lbs, theres alot of people that push limits on d series engines , iam running a stock cranck still holding up strong, im shooting for a 400-500 range but my whole motor is build only stock is the trans , my fuel lines are upgraded as well to 4an's line. ive over boosted to an thank god it still hasnt send to the moon

@dougqick

14 күн бұрын

from what i have learned the crank isn't the weakest point its the cylinder walls cracking after 400hp all tho i have run 30psi threw my built y8 with stock cylinder walls and so far am ok but i also have a block guard definitely need to run a d16z6 crank tho best for a d series

Hey that was a pretty badass video!! I have d16y5 needs rebuilt and want a turbo. The engine is old knocking leaking and burning oil. Wish me good luck any pointers or tips appreciated

@underestimatedgarage

6 ай бұрын

for turbo id recommend doing upgrade oil pump, Get some eagle rods and vitara pistons bang for your buck you can get the kit for around 400-600 bucks Polish you crank and check its still good also your bearing clearence

@jdmchickkustomz9417

6 ай бұрын

@@underestimatedgarage cool cool ok. I'm hoping I can do this I've never done engine rebuild. Been studying videos on it and turbo setup. Thanks 💯

@underestimatedgarage

6 ай бұрын

@@jdmchickkustomz9417 never be afraid to learn thats how i was

@jdmchickkustomz9417

6 ай бұрын

@@underestimatedgarage well I've helped pull a 4G 63 engine for my Mitsubishi but haven't swapped it yet. Now my Civic is starting to have problems so I need to get the engine rebuilt and drive the Mitsubishi with 4g64. I am learning and excited to build both my cars 😉

@underestimatedgarage

6 ай бұрын

@@jdmchickkustomz9417 4g64 great motors ! imagine now swapping that into a civic .. 🤯 Aslong you start somewhere and you have a vision it what matters you have to mess up sometimes to learn

Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !

I've read that the maxpeeding rod turbo is good for sohcs

@underestimatedgarage

Жыл бұрын

Hoping on it so far soo good 🙏🏼

@kareemmohamed701

Жыл бұрын

false i’ve had my max speeding rods turbo for a year doing great!

@underestimatedgarage

Жыл бұрын

@@kareemmohamed701 for a year? what happen

@kareemmohamed701

Жыл бұрын

@@underestimatedgarage still running strong no rebuild 30 psi still running strong

@underestimatedgarage

Жыл бұрын

oh yeaaah! 30 psi!

What you got for a tune? Street or dyno?

@underestimatedgarage

Жыл бұрын

So far it has a base map tune on my s300 for break it in

@Ondamon375

Жыл бұрын

@@underestimatedgarage My brother knows a tuner in Wenatchee I just can’t remember the name atm, but my buddy trever has had a few tunes at richtuned over by Tacoma and likes em

@underestimatedgarage

Жыл бұрын

@@Ondamon375 think your talking about miah alteredimport yeah might be on his dyno see how much we make

I just got a turbo for my d16y7 I have the full kit they are charging me 3k to install it I feel like I can install it myself but I'm not sure wat type of problems I can run into by doing it myself?

@underestimatedgarage

Жыл бұрын

3k to install? now thats alot they doing a base map tune atleast with it? i can help you out its not hard to install

@legit4083

Жыл бұрын

2200 for installation plus 1500 for ecu,hondata,jumper harness,chipping and injectors

@underestimatedgarage

Жыл бұрын

@@legit4083 i would only pay for ecu stuff an like some wiring but piping all that you can do your self it aint hard

@legit4083

Жыл бұрын

@Underestimated Garage so should I try and install the kit and take the car to them after? And if I try to install it myself and I run into something I'm not sure of I can ask you or what?

@underestimatedgarage

Жыл бұрын

@@legit4083 yes that would save you some money and you can learn as well, ill be glad to help you add me on facebook

what drop manifold is that?

@underestimatedgarage

Жыл бұрын

Company out in LA called AJP Distriburators

So is that a bottom mount turbo kit with a hood exits dude I can’t find a pipe anywhere

@underestimatedgarage

3 ай бұрын

i did mine on my own until i change it to a top mount with a hood exit , when it was bottom mount i just did a hood dump first weeks ran it with no hood, than i did a bumper exit for a long time

@robertlambert7906

3 ай бұрын

@@underestimatedgarage what’s up sell me the old hood dump

@underestimatedgarage

3 ай бұрын

@@robertlambert7906 id give it to you if i still had it but i dont 🥺 gave it away

@robertlambert7906

3 ай бұрын

@@underestimatedgarage dang it make me one lol

@underestimatedgarage

3 ай бұрын

@@robertlambert7906 ill have to see if i still have a flange and some pipe at my storage

Out of all things go cheap on the cam gear🤣🤣

@underestimatedgarage

Жыл бұрын

the vms ? lol

@strawmannhonda529

Жыл бұрын

The VMS gear for sohc is true and quality. I use it for my d series 18 psi 4000 miles hard boosted and still eating vettes..

@underestimatedgarage

Жыл бұрын

alot of people dislike them & like them but honestly ive been happy with it and i got tunning this couple of weeks

This is the worst build video I ever watched

@underestimatedgarage

4 ай бұрын

why is that?

@robertlambert7906

4 ай бұрын

I’m just kidding bro

@underestimatedgarage

4 ай бұрын

@robertlambert7906 😅 im like man what was wrong with it lol

@robertlambert7906

3 ай бұрын

@@underestimatedgarage so how much did the build cost and what hp you get

@underestimatedgarage

3 ай бұрын

@@robertlambert7906 it what about 4k and i got my numbers down on my other video in the dyno it was about 289hp and 269 ft lbs of torque thats on pump gas we dont have no E 85 on our area