cvtech clutch installed on a 2019 Can am outlander 1000r xt.
Installing the cvtech clutch finally!!! my 2019 Can am outlander 1000r xt can stop smoking the belt.
Жүктеу.....
Пікірлер: 40
@ecureed3 жыл бұрын
Love the channel sir, very helpful
@ajjacobs13383 жыл бұрын
Great video buddy very informative seeming how I just got the 2021 outlander Xmr 1000r this is very useful
@RobMillerATV
3 жыл бұрын
Mission accomplished! That's why I do the videos. Glad I could help. Thanks for commenting as well. Check out my other videos, iv done a few modification videos on this quad.
@ajjacobs1338
3 жыл бұрын
@@RobMillerATV indeed I will
@Hennes0033 жыл бұрын
Another good video Robert. I won't be changing my clutch anytime soon but now I know how. How do you like the clutch?
@RobMillerATV
3 жыл бұрын
I love it. It still needs some tuning In the secondary. I'm waiting for someone who knows more about it to guide me thru it. But i will definitely pass on anything i learn to KZread. Glad you liked the video! Great to get positive feedback. Thanks
@RobMillerATV3 жыл бұрын
3500km and iv had an antifreeze leak fixed by warranty and blew 2 front shocks.
@jasonmorehouse3756 Жыл бұрын
Good vid.
@RobMillerATV
Жыл бұрын
Thanks Jason.
@cinaciccio13 жыл бұрын
Why you changed the oem primary bolt? And wich bolt did you put on? Thanks
@RobMillerATV
3 жыл бұрын
The oem is a stud. The bolt is easier. I ordered a bolt for a 2015 I think.
@RevDevGaming Жыл бұрын
Do you have to do this is the stock clutch not good? I’m trying to buy this 4wheeler for trails but I hear a lot about the clutches not being good.
@RobMillerATV
Жыл бұрын
If you run big tires it's necessary.
@livelaughlove20able2 жыл бұрын
Hey rob what did you torque the 30mm nut to ft/lbs??
@RobMillerATV
2 жыл бұрын
I can't remember. But if you watch my cvtech tune video I think I mention the torc specs
@CF625TR10 ай бұрын
CAN I PUT CF600 cvt rear variator to segway? Whole secondary I mean does it compatible?
@RobMillerATV
10 ай бұрын
The stock secondary on the can am works great. Not sure about Segway.
@1966cambo3 жыл бұрын
Helpful to put 2 nuts on the long clutch release bolt,tighten them together and they should stay,or you could use permanent locktight Thanks for the videos, well done.
@eduardodeleon53392 жыл бұрын
I just installed a cvtech on my 1000r xt after installing now i have trouble putting in to gear R H L what could be the problem
@RobMillerATV
2 жыл бұрын
You will have to take the clutch cover off and look. Your primary shouldn't spin the secondary at idle. If it is, then u have an alignment issue, one way bearing is on backwards or the weights are way to heavy.
@eduardodeleon5339
2 жыл бұрын
@@RobMillerATV i got the cover off and primery does not spin at idle i do not know what weights i have
@RobMillerATV
2 жыл бұрын
@Eduardo De Leon if the secondary isn't spinning at idle then it has nothing to do with the clutch. It's probably the shifter linkage.
@eduardodeleon5339
2 жыл бұрын
@@RobMillerATV i tried adjusting it but still no change
@RobMillerATV
2 жыл бұрын
@Eduardo De Leon I'm out of ideas. Sorry
@johnnyhelems52963 жыл бұрын
Tap on it
@johnyboy42052 ай бұрын
Cvtech says torque spec is 133 fp
@RobMillerATV
2 ай бұрын
For the nut that holds the outer clutch to the inner yes. But the bolt that holds the clutch to the shaft is only 75 to 80 pf.
Пікірлер: 40
Love the channel sir, very helpful
Great video buddy very informative seeming how I just got the 2021 outlander Xmr 1000r this is very useful
@RobMillerATV
3 жыл бұрын
Mission accomplished! That's why I do the videos. Glad I could help. Thanks for commenting as well. Check out my other videos, iv done a few modification videos on this quad.
@ajjacobs1338
3 жыл бұрын
@@RobMillerATV indeed I will
Another good video Robert. I won't be changing my clutch anytime soon but now I know how. How do you like the clutch?
@RobMillerATV
3 жыл бұрын
I love it. It still needs some tuning In the secondary. I'm waiting for someone who knows more about it to guide me thru it. But i will definitely pass on anything i learn to KZread. Glad you liked the video! Great to get positive feedback. Thanks
3500km and iv had an antifreeze leak fixed by warranty and blew 2 front shocks.
Good vid.
@RobMillerATV
Жыл бұрын
Thanks Jason.
Why you changed the oem primary bolt? And wich bolt did you put on? Thanks
@RobMillerATV
3 жыл бұрын
The oem is a stud. The bolt is easier. I ordered a bolt for a 2015 I think.
Do you have to do this is the stock clutch not good? I’m trying to buy this 4wheeler for trails but I hear a lot about the clutches not being good.
@RobMillerATV
Жыл бұрын
If you run big tires it's necessary.
Hey rob what did you torque the 30mm nut to ft/lbs??
@RobMillerATV
2 жыл бұрын
I can't remember. But if you watch my cvtech tune video I think I mention the torc specs
CAN I PUT CF600 cvt rear variator to segway? Whole secondary I mean does it compatible?
@RobMillerATV
10 ай бұрын
The stock secondary on the can am works great. Not sure about Segway.
Helpful to put 2 nuts on the long clutch release bolt,tighten them together and they should stay,or you could use permanent locktight Thanks for the videos, well done.
I just installed a cvtech on my 1000r xt after installing now i have trouble putting in to gear R H L what could be the problem
@RobMillerATV
2 жыл бұрын
You will have to take the clutch cover off and look. Your primary shouldn't spin the secondary at idle. If it is, then u have an alignment issue, one way bearing is on backwards or the weights are way to heavy.
@eduardodeleon5339
2 жыл бұрын
@@RobMillerATV i got the cover off and primery does not spin at idle i do not know what weights i have
@RobMillerATV
2 жыл бұрын
@Eduardo De Leon if the secondary isn't spinning at idle then it has nothing to do with the clutch. It's probably the shifter linkage.
@eduardodeleon5339
2 жыл бұрын
@@RobMillerATV i tried adjusting it but still no change
@RobMillerATV
2 жыл бұрын
@Eduardo De Leon I'm out of ideas. Sorry
Tap on it
Cvtech says torque spec is 133 fp
@RobMillerATV
2 ай бұрын
For the nut that holds the outer clutch to the inner yes. But the bolt that holds the clutch to the shaft is only 75 to 80 pf.
I wouldn't take any advice from this guy
@RobMillerATV
2 жыл бұрын
Don't forget to subscribe lol