Great video! Thanks!

@EPIperformance

6 жыл бұрын

Thanks! Glad we could help.

Whats the main reason to change the weights in the primary cutch. ? And also where did u purchase the kit for the new springs and weights ?

What's the part number on the tool to hold the clutches?

2018 can am commander 1000R is the same process. Just an FYI

DO THE SAME TOURQE SPECS APPLY TO A 2022 XMR ?

Amigo buenas una prenda donde se consigue la llave de soltar los dos poleas

Los dos cluths giran juntos estando en neutral o parking? Es normal

7:45 what do you do if you didn’t mark it?

@EPIperformance

5 жыл бұрын

Then all you can do is put it back together. In most cases you wont see any difference unless there is some bad wear in the clutches.

Hi do u have a part number and where I can buy the clutch lock up tool online?i can’t find it anywhere ,I assume it’s same one for 2016 renegade xmr 1000

@EPIperformance

5 жыл бұрын

The OE Can Am number is 529-036-238. We don't sell them but I would search for the number on line.

@1978coop

5 жыл бұрын

Thanx a lot will do now

Any noticeable performance improvement with the kit?

@EPIperformance

2 жыл бұрын

Yes a lot better low end and mid range power, faster back shift and throttle response and grip the belts better.

What is that clutch tool called? I would like to get one for my Arctic Cat 400 4x4.

@EPIperformance

4 жыл бұрын

The Arctic Cat 400 clutches are a totally different style clutch then what Can Am uses. We do have a video on a Arctic Cat 450 on our website that you can see at www.epiperformance.com. The Artic Cat 450 and the Kymco Maxxer are the same machine and would use very similar clutches to the 400. Hope that helps.

@gerry4162

4 жыл бұрын

@@EPIperformance Thank you!

Where can I buy the clutch tool?

@EPIperformance

5 жыл бұрын

We bought ours through the local dealer. Some dealers wont sell you the tools so you might want to look online. We sell the clutch puller for all the machines if you need one.

hey friend I have a problem with my 2016 can-am 1000 let's see if you can help me. The shift lever became hard, then one of the clutch springs broke! I changed the part myself but now it doesn't want to apply the speeds. stays in one speed

@EPIperformance

4 ай бұрын

Chances are you have an issue with your shifter linkage or an actual transmission. Its not very common for a primary spring to break so it did you make have a worn our primary clutch. If its the secondary spring usually the only way they have issues is if your bolt comes loose and the clutch starts to come off. If you shut the machine off and it shift normal then its probably the clutches. If it still shifts hard or wont change gears then its your linkage or the tranny.

The new weights are heavier then old weights?

@EPIperformance

7 ай бұрын

Yes in most cases they will be heavier, It depends on the exact model, year and kit you are looking at,