Cutting Plastic with a Dremel Multitool Rotary Tool
Жүктеу.....
Пікірлер: 121
@brasil332 жыл бұрын
Thank you SO MUCH! Your video instructions are clear and very easy to follow. (Without any distracting music added!) 👍🏼👏🏼
@PeterFinnTheCarDoctor
2 жыл бұрын
Glad it helped! 👍😃
@LB-yt8zr7 ай бұрын
You are my new Hero! Thank you for such detail - i bought a Dremel but instuctions so poor i was unable to work it! So now i can! May your house always be filled with love and security! 🥰👏👍
@PeterFinnTheCarDoctor
7 ай бұрын
You are welcome!
@SirChivalRegal4 жыл бұрын
I'm a beginner using a rotary tool. I've found Your video very informative , and moral boosting. Thanks! .
@PeterFinnTheCarDoctor
2 жыл бұрын
You will be the Master in future.
@PeterFinnTheCarDoctor
2 жыл бұрын
Great to hear!
@sleepinglioness57545 жыл бұрын
Thank you very much for your video. I could not remember how to use my dremel until I watched this. I just made the most awesome cat shelter in half the time it took me before. Blessings and thanks again, and thanks from the little feral cat who will benefit from your lesson.
@PeterFinnTheCarDoctor
5 жыл бұрын
Thanks Sir. :-) Dremel is Star
@TerryMasri4 жыл бұрын
You sound like Dracula! LOL Based on my experience, I think you should use the lowest speed for plastics in order to prevent plastic from overheating and melting, resulting in a cleaner cut IMHO.
@thatguy6344
3 жыл бұрын
Thanks this was helpful
@ThePiprian
3 жыл бұрын
When I try using lower speeds my dremel starts jumping around and it gets almost impossible to get an accurate cut.
@LeviBulger
2 жыл бұрын
Definitely lower speed, maybe around 10k RPM and apply enough pressure so it doesn't skip around.
@mandymcclay
2 жыл бұрын
I think no $hits are given when he's working lol WoW
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi. Thanks for the tips.
@taymeekoopthanaroj163211 ай бұрын
I'm new to Dremels, but this thing has been great. kzread.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
@PeterFinnTheCarDoctor
11 ай бұрын
Great 👍😀
@NWforager Жыл бұрын
thanks for this . i watched it years ago . and just now again as a refresher! so thank you again !
@PeterFinnTheCarDoctor
Жыл бұрын
Glad you enjoyed it!
@ricklee45133 жыл бұрын
Yes I can see he is wearing the safety gloves.
@PeterFinnTheCarDoctor
3 жыл бұрын
Good
@forgottenknowledge8917
Жыл бұрын
That's how I wear them
@Eyes2theSkies3 жыл бұрын
Hi Peter. I'm a new sub to your channel. Thank you for teaching me how to cut hard plastic using a dremel tool. Peace to you! 🤣🙆♀️🕊
@PeterFinnTheCarDoctor
3 жыл бұрын
👍🤠
@parrots4life744 жыл бұрын
Thank you. Im confident I can cut neatly with a dremel now :)
@PeterFinnTheCarDoctor
2 жыл бұрын
Thanks you. Glad it helped.
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. I support your career.
@ditr2576 жыл бұрын
Excellent job Peter! Please use Dremel Multitool to sand the edges a little bit!
@PeterFinnTheCarDoctor
6 жыл бұрын
You are Welcome. :-)
@Orionrobots3 жыл бұрын
As an experiment - I tried drilling with a Dremel as opposed to a cordless drill body (trigger grip style) or a pin vise. I found it a bit awkward and cumbersome - definitely not a task the Dremel is entirely suited to. I have been experimenting with cutting different plastics and materials with the Dremel. Be warned that some make a rancid smell if they more melt than cut.
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. Thanks for your information.
@mariacallas99624 жыл бұрын
Your video gave me trust in myself.thks!
@PeterFinnTheCarDoctor
4 жыл бұрын
Glad to hear that
@DSDMovies4 жыл бұрын
Jesus Christ, you almost took your finger off at 6:40.
@TuffApe
4 жыл бұрын
LMFAO
@sammyanderson2726
3 жыл бұрын
😂😂😂😂
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. I am pro.
@kylewilliams3306Ай бұрын
I wanted to know what would be a good small dremel tool that cut 5.31” cut out cricle for 6.5 150watt marine speaker on both plastic ammo box and plastic toolbox that not expensive for beginer ?
@PeterFinnTheCarDoctor
Ай бұрын
Thanks for comment.😊👍
@vaibhavaher79854 жыл бұрын
Nice video. Could you please also explain how to make small slots in plastic? (say 3mm length and 0.5mm wide slot in 5mm thick plastic)
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi. Good idea.
@davidstrickland64283 жыл бұрын
Dremel 575 right angle attachment makes this even more convenient.
@PeterFinnTheCarDoctor
3 жыл бұрын
👍😁
@JTstuff15 жыл бұрын
video helped me out thanks.
@PeterFinnTheCarDoctor
5 жыл бұрын
Thanks 👍🙂
@johnwagner45593 жыл бұрын
Use lower speed to cut plastic and don't press so hard... You'll wear out the disc...
@PeterFinnTheCarDoctor
3 жыл бұрын
Ok
@arielelijah12823 жыл бұрын
Hi is it okay to use sanding disk to cut plastic like ABS.
@PeterFinnTheCarDoctor
3 жыл бұрын
Yes
@myfragilelilac2 жыл бұрын
What about the chemicals that comes out from the plastic? I cut in a toy today with dremel for an art project and I was a bit concerned about that.
@PeterFinnTheCarDoctor
2 жыл бұрын
Work outside and with 3M mask
@ericr5132 жыл бұрын
You sound like a player from GTA 5 and your work is good my friend nice custom fix.
@PeterFinnTheCarDoctor
2 жыл бұрын
👍 Thanks Sir.
@indiferreira7258 Жыл бұрын
Thanks! I had no idea what disc to use!
@PeterFinnTheCarDoctor
Жыл бұрын
Glad I could help!
@snoggingmoise668 Жыл бұрын
Hi, I have to cut out an oval shape out of a pvc tube. If the tube is standing up straight I have to cut out the shape horizontally. The diameter of the tube is 20 centimeters. Do you think I can do that with a Dremel rotary tool?
@PeterFinnTheCarDoctor
Жыл бұрын
Yes. 👍
@snoggingmoise668
Жыл бұрын
@@PeterFinnTheCarDoctor But do you think it will look nice? I know I'll need to sand it anyway but do you think I can cut a nice, "straight" oval shape if I follow the lines that I'll draw on the tube?
@andrewmorton9683 Жыл бұрын
I liked the way it looked like you were cutting a hole in the box for something, maybe to fit an extra tool in there, and then it turned out that you were only using the plastic to make something else 😆
@PeterFinnTheCarDoctor
Жыл бұрын
👍😀
@kaijuk2 жыл бұрын
Any tips how to remove melted plastic from my Dremel diamond tip sanding burrs please, I used a diamond saw disc and small burrs to cut and smooth some hard plastic on a hard plastic figure I'm making modifications to and the plastic is the hard kind but not brittle, it melts when hot and has become moulded hard to my metal sanding burr tips and saw disc... Any ideas? 🤔 Thanks in advance 😊✌🏻
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi, please use hot gun or small fire flames. Blow things away.
@kaijuk
2 жыл бұрын
@@PeterFinnTheCarDoctor thank you I'll get straight to it 👍🏻😊✌🏻
@dadathome2744 жыл бұрын
Could you have decided what disk you were going to use before you started filming please !
@PeterFinnTheCarDoctor
4 жыл бұрын
Hello, I read Your comment. Thanks. 👍😀
@andrewjarvis77772 жыл бұрын
YOU DID IT! GREAT WORK!
@PeterFinnTheCarDoctor
2 жыл бұрын
Thank you!! 😁
@andrewjarvis7777
2 жыл бұрын
@@PeterFinnTheCarDoctor i'm installing some 12v and usb ports in the back of my 4runner today. this looks like the perfect tool i just ordered a cordless dremel and plastic cutting tool and attachment, it looks like a lot of fun lolol
@davevaughan69275 жыл бұрын
Trapping the cable, like that, is a No-No - and it will not be waterproof. [IP44 requirement]
@PeterFinnTheCarDoctor
5 жыл бұрын
Great info to hear and Many Thanks. :-)
@mandymcclay2 жыл бұрын
Haha Holy $#!t how have you still got fingers and thumbs?!? I was seriously having kittens watching that :-o but 100% thee best tutorials ever rough and ready lol
@PeterFinnTheCarDoctor
2 жыл бұрын
Right?! I know this video is funny and also informative.
@joeycottontailakajoeschmo33665 жыл бұрын
I forgot to use my earplugs to watch this. I can't hear anything but your voice now.
@PeterFinnTheCarDoctor
5 жыл бұрын
Ok
@Nelson484 Жыл бұрын
Looks like it is very hard to cut at the straight angle since the cutting wheel is so small so you always have a bit of an angle.
@cyberluke
Жыл бұрын
I bought right angle attachment - 575
@PeterFinnTheCarDoctor
Жыл бұрын
Right 👍
@freeNode59 ай бұрын
you can buy cheap plastic cutting-board made for food. It is much cheaper plastic material than replacing your toolbox for material
@PeterFinnTheCarDoctor
9 ай бұрын
Good comment 👍
@thaotaylor6669 Жыл бұрын
Men has works tools woman has sewing machine and pattern, thanks for showing this tips
@PeterFinnTheCarDoctor
Жыл бұрын
You’re welcome 😊
@Imissthefuhrer5 жыл бұрын
I find that these tiny disks for rotary tools are utterly useless and break so easy. Just use a big boy cut off wheel on a angle grinder. These mini disks are pretty dangerous.
@PeterFinnTheCarDoctor
5 жыл бұрын
Hi and Thanks for feedback. :-)
@mustardbrown
4 жыл бұрын
ImisstheFührer Try the milwaukee discs on their rotary tool. Just as strong as my 4 1/2” angle grinder. i was pleasantly surprised...
@dannietuggle89543 жыл бұрын
This was a great video. I like that you explain everything.
@PeterFinnTheCarDoctor
3 жыл бұрын
I appreciate that!
@wahpanda15203 жыл бұрын
mine kinda gets stuck but im also cutting through the equivliant of a rock XD
@PeterFinnTheCarDoctor
2 жыл бұрын
OK. Usually Dremel is weak with rock maining.😎
@suberlex24684 жыл бұрын
Never Knew Gru Cuts plastic
@PeterFinnTheCarDoctor
4 жыл бұрын
Thanks for comment. 😃👍
@diversitylove54603 жыл бұрын
Intelligent men are so very attractive.
@PeterFinnTheCarDoctor
3 жыл бұрын
Thanks 🙂
@MilesToRoam853 жыл бұрын
I know how to use a dremel tool to cut.... I really didn't need to watch this video but his voice is fun and cutting with a dremel is fun so I watched 🤷🏼♂️
@PeterFinnTheCarDoctor
3 жыл бұрын
Cool
@shinchiwarrior6 жыл бұрын
Awesome. This sounded like some covert project.
@PeterFinnTheCarDoctor
6 жыл бұрын
You are Welcome. :-)
@shabbee
5 жыл бұрын
I love you accent
@kevinkall85473 ай бұрын
you showed those protective gloves...
@PeterFinnTheCarDoctor
3 ай бұрын
Thanks for your comment👍😀
@jordandougherty5715Ай бұрын
I would have re used the same hole, other then that nice job.
@PeterFinnTheCarDoctor
Ай бұрын
You are most welcome
@moez17742 жыл бұрын
Gloves is necessary, just not in the video instruction. Lol
@PeterFinnTheCarDoctor
2 жыл бұрын
Thanks ! Good work.
@nirhawk6 жыл бұрын
its look really messy and plastic dust everywhere for such a simple cut,,,,,,
@PeterFinnTheCarDoctor
6 жыл бұрын
Yes, some things are messy
@spencerwarren92192 жыл бұрын
Would have been alot easier to cut it on the other side
@PeterFinnTheCarDoctor
2 жыл бұрын
Thank You 👍😀
@astroid90873 жыл бұрын
🙏❤
@PeterFinnTheCarDoctor
3 жыл бұрын
Thanks Sir. 😀
@johnson5546717 ай бұрын
Sorry brother, too much work. I would of just prepped up that piece of plastic on a vertical band saw, and much cleaner cut. But thanks for posting.
Пікірлер: 121
Thank you SO MUCH! Your video instructions are clear and very easy to follow. (Without any distracting music added!) 👍🏼👏🏼
@PeterFinnTheCarDoctor
2 жыл бұрын
Glad it helped! 👍😃
You are my new Hero! Thank you for such detail - i bought a Dremel but instuctions so poor i was unable to work it! So now i can! May your house always be filled with love and security! 🥰👏👍
@PeterFinnTheCarDoctor
7 ай бұрын
You are welcome!
I'm a beginner using a rotary tool. I've found Your video very informative , and moral boosting. Thanks! .
@PeterFinnTheCarDoctor
2 жыл бұрын
You will be the Master in future.
@PeterFinnTheCarDoctor
2 жыл бұрын
Great to hear!
Thank you very much for your video. I could not remember how to use my dremel until I watched this. I just made the most awesome cat shelter in half the time it took me before. Blessings and thanks again, and thanks from the little feral cat who will benefit from your lesson.
@PeterFinnTheCarDoctor
5 жыл бұрын
Thanks Sir. :-) Dremel is Star
You sound like Dracula! LOL Based on my experience, I think you should use the lowest speed for plastics in order to prevent plastic from overheating and melting, resulting in a cleaner cut IMHO.
@thatguy6344
3 жыл бұрын
Thanks this was helpful
@ThePiprian
3 жыл бұрын
When I try using lower speeds my dremel starts jumping around and it gets almost impossible to get an accurate cut.
@LeviBulger
2 жыл бұрын
Definitely lower speed, maybe around 10k RPM and apply enough pressure so it doesn't skip around.
@mandymcclay
2 жыл бұрын
I think no $hits are given when he's working lol WoW
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi. Thanks for the tips.
I'm new to Dremels, but this thing has been great. kzread.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.
@PeterFinnTheCarDoctor
11 ай бұрын
Great 👍😀
thanks for this . i watched it years ago . and just now again as a refresher! so thank you again !
@PeterFinnTheCarDoctor
Жыл бұрын
Glad you enjoyed it!
Yes I can see he is wearing the safety gloves.
@PeterFinnTheCarDoctor
3 жыл бұрын
Good
@forgottenknowledge8917
Жыл бұрын
That's how I wear them
Hi Peter. I'm a new sub to your channel. Thank you for teaching me how to cut hard plastic using a dremel tool. Peace to you! 🤣🙆♀️🕊
@PeterFinnTheCarDoctor
3 жыл бұрын
👍🤠
Thank you. Im confident I can cut neatly with a dremel now :)
@PeterFinnTheCarDoctor
2 жыл бұрын
Thanks you. Glad it helped.
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. I support your career.
Excellent job Peter! Please use Dremel Multitool to sand the edges a little bit!
@PeterFinnTheCarDoctor
6 жыл бұрын
You are Welcome. :-)
As an experiment - I tried drilling with a Dremel as opposed to a cordless drill body (trigger grip style) or a pin vise. I found it a bit awkward and cumbersome - definitely not a task the Dremel is entirely suited to. I have been experimenting with cutting different plastics and materials with the Dremel. Be warned that some make a rancid smell if they more melt than cut.
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. Thanks for your information.
Your video gave me trust in myself.thks!
@PeterFinnTheCarDoctor
4 жыл бұрын
Glad to hear that
Jesus Christ, you almost took your finger off at 6:40.
@TuffApe
4 жыл бұрын
LMFAO
@sammyanderson2726
3 жыл бұрын
😂😂😂😂
@PeterFinnTheCarDoctor
2 жыл бұрын
HI. I am pro.
I wanted to know what would be a good small dremel tool that cut 5.31” cut out cricle for 6.5 150watt marine speaker on both plastic ammo box and plastic toolbox that not expensive for beginer ?
@PeterFinnTheCarDoctor
Ай бұрын
Thanks for comment.😊👍
Nice video. Could you please also explain how to make small slots in plastic? (say 3mm length and 0.5mm wide slot in 5mm thick plastic)
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi. Good idea.
Dremel 575 right angle attachment makes this even more convenient.
@PeterFinnTheCarDoctor
3 жыл бұрын
👍😁
video helped me out thanks.
@PeterFinnTheCarDoctor
5 жыл бұрын
Thanks 👍🙂
Use lower speed to cut plastic and don't press so hard... You'll wear out the disc...
@PeterFinnTheCarDoctor
3 жыл бұрын
Ok
Hi is it okay to use sanding disk to cut plastic like ABS.
@PeterFinnTheCarDoctor
3 жыл бұрын
Yes
What about the chemicals that comes out from the plastic? I cut in a toy today with dremel for an art project and I was a bit concerned about that.
@PeterFinnTheCarDoctor
2 жыл бұрын
Work outside and with 3M mask
You sound like a player from GTA 5 and your work is good my friend nice custom fix.
@PeterFinnTheCarDoctor
2 жыл бұрын
👍 Thanks Sir.
Thanks! I had no idea what disc to use!
@PeterFinnTheCarDoctor
Жыл бұрын
Glad I could help!
Hi, I have to cut out an oval shape out of a pvc tube. If the tube is standing up straight I have to cut out the shape horizontally. The diameter of the tube is 20 centimeters. Do you think I can do that with a Dremel rotary tool?
@PeterFinnTheCarDoctor
Жыл бұрын
Yes. 👍
@snoggingmoise668
Жыл бұрын
@@PeterFinnTheCarDoctor But do you think it will look nice? I know I'll need to sand it anyway but do you think I can cut a nice, "straight" oval shape if I follow the lines that I'll draw on the tube?
I liked the way it looked like you were cutting a hole in the box for something, maybe to fit an extra tool in there, and then it turned out that you were only using the plastic to make something else 😆
@PeterFinnTheCarDoctor
Жыл бұрын
👍😀
Any tips how to remove melted plastic from my Dremel diamond tip sanding burrs please, I used a diamond saw disc and small burrs to cut and smooth some hard plastic on a hard plastic figure I'm making modifications to and the plastic is the hard kind but not brittle, it melts when hot and has become moulded hard to my metal sanding burr tips and saw disc... Any ideas? 🤔 Thanks in advance 😊✌🏻
@PeterFinnTheCarDoctor
2 жыл бұрын
Hi, please use hot gun or small fire flames. Blow things away.
@kaijuk
2 жыл бұрын
@@PeterFinnTheCarDoctor thank you I'll get straight to it 👍🏻😊✌🏻
Could you have decided what disk you were going to use before you started filming please !
@PeterFinnTheCarDoctor
4 жыл бұрын
Hello, I read Your comment. Thanks. 👍😀
YOU DID IT! GREAT WORK!
@PeterFinnTheCarDoctor
2 жыл бұрын
Thank you!! 😁
@andrewjarvis7777
2 жыл бұрын
@@PeterFinnTheCarDoctor i'm installing some 12v and usb ports in the back of my 4runner today. this looks like the perfect tool i just ordered a cordless dremel and plastic cutting tool and attachment, it looks like a lot of fun lolol
Trapping the cable, like that, is a No-No - and it will not be waterproof. [IP44 requirement]
@PeterFinnTheCarDoctor
5 жыл бұрын
Great info to hear and Many Thanks. :-)
Haha Holy $#!t how have you still got fingers and thumbs?!? I was seriously having kittens watching that :-o but 100% thee best tutorials ever rough and ready lol
@PeterFinnTheCarDoctor
2 жыл бұрын
Right?! I know this video is funny and also informative.
I forgot to use my earplugs to watch this. I can't hear anything but your voice now.
@PeterFinnTheCarDoctor
5 жыл бұрын
Ok
Looks like it is very hard to cut at the straight angle since the cutting wheel is so small so you always have a bit of an angle.
@cyberluke
Жыл бұрын
I bought right angle attachment - 575
@PeterFinnTheCarDoctor
Жыл бұрын
Right 👍
you can buy cheap plastic cutting-board made for food. It is much cheaper plastic material than replacing your toolbox for material
@PeterFinnTheCarDoctor
9 ай бұрын
Good comment 👍
Men has works tools woman has sewing machine and pattern, thanks for showing this tips
@PeterFinnTheCarDoctor
Жыл бұрын
You’re welcome 😊
I find that these tiny disks for rotary tools are utterly useless and break so easy. Just use a big boy cut off wheel on a angle grinder. These mini disks are pretty dangerous.
@PeterFinnTheCarDoctor
5 жыл бұрын
Hi and Thanks for feedback. :-)
@mustardbrown
4 жыл бұрын
ImisstheFührer Try the milwaukee discs on their rotary tool. Just as strong as my 4 1/2” angle grinder. i was pleasantly surprised...
This was a great video. I like that you explain everything.
@PeterFinnTheCarDoctor
3 жыл бұрын
I appreciate that!
mine kinda gets stuck but im also cutting through the equivliant of a rock XD
@PeterFinnTheCarDoctor
2 жыл бұрын
OK. Usually Dremel is weak with rock maining.😎
Never Knew Gru Cuts plastic
@PeterFinnTheCarDoctor
4 жыл бұрын
Thanks for comment. 😃👍
Intelligent men are so very attractive.
@PeterFinnTheCarDoctor
3 жыл бұрын
Thanks 🙂
I know how to use a dremel tool to cut.... I really didn't need to watch this video but his voice is fun and cutting with a dremel is fun so I watched 🤷🏼♂️
@PeterFinnTheCarDoctor
3 жыл бұрын
Cool
Awesome. This sounded like some covert project.
@PeterFinnTheCarDoctor
6 жыл бұрын
You are Welcome. :-)
@shabbee
5 жыл бұрын
I love you accent
you showed those protective gloves...
@PeterFinnTheCarDoctor
3 ай бұрын
Thanks for your comment👍😀
I would have re used the same hole, other then that nice job.
@PeterFinnTheCarDoctor
Ай бұрын
You are most welcome
Gloves is necessary, just not in the video instruction. Lol
@PeterFinnTheCarDoctor
2 жыл бұрын
Thanks ! Good work.
its look really messy and plastic dust everywhere for such a simple cut,,,,,,
@PeterFinnTheCarDoctor
6 жыл бұрын
Yes, some things are messy
Would have been alot easier to cut it on the other side
@PeterFinnTheCarDoctor
2 жыл бұрын
Thank You 👍😀
🙏❤
@PeterFinnTheCarDoctor
3 жыл бұрын
Thanks Sir. 😀
Sorry brother, too much work. I would of just prepped up that piece of plastic on a vertical band saw, and much cleaner cut. But thanks for posting.
@PeterFinnTheCarDoctor
7 ай бұрын
Thanks for the tip
Hahàhha he keeps turning it up wfo
@PeterFinnTheCarDoctor
Жыл бұрын
👍
Cut to the chase borat
@PeterFinnTheCarDoctor
5 ай бұрын
Thanks for comment 😀👍
This dude is a fucking mess 😂😂😂
Please don't make any more videos
@Comasleep
3 жыл бұрын
ahahahaha
@PeterFinnTheCarDoctor
2 жыл бұрын
👍 I have done a lots of them since.