Cutting and Buffing to Create a Smooth as Glass Finish - Truck Tech S3, E15
Автокөліктер мен көлік құралдары
Basket case is wired bumper to bumper while the Chevy C10 is plumbed and given a custom cutout exhaust.
PARTS USED IN THIS EPISODE:
Aeromotive Inc.: Fuel pump, Electric, Phantom, In-Tank, 90 psi, 340 lph, Gasoline, Each
More Info: pntv.us/pn_pt_12666
Borla: Custom 3" Stainless Builder Kit
More Info: pntv.us/pn_pt_12668
Borla: 3.00" ATAK for SBC Hot 350, 383-Chevrolet
More Info: pntv.us/pn_pt_12671
Metal Rescue: Metal Rescue Rust Remover Bath
More Info: pntv.us/pn_pt_12669
Ron Francis: XP-67 Ford Powered EXPRESS Wiring System, COMPLETE WIRING SYSTEM: 16 Fuse = 18-20 Circuits
More Info: pntv.us/pn_pt_12672
Brothers Truck Parts: 54-55.1 Electric Windshield Wiper Conversion - 12 VOLT
Chemical Guys : TORQ TORQ22D Random Orbital Polisher Kit: TORQ22D Random Orbital Polisher, TORQ22D Random Orbital Polisher Backing Plate (6 inch), Hex-Logic Medium-Heavy Cutting Pad, Orange (6.5 Inch), Hex-Logic Light-Medium Polishing Pad, White (6.5 Inch), Hex-Logic Finishing Pad, Black (6.5 Inch), V Line Polish & Compound Sample Kit (4 oz)
Metal Rescue: Dry Coat Rust Preventative Liquid
Pace Performance: LT1 Wet-Sump 6.2L 460HP Crate Engine
The Industrial Depot: Fasteners, Hardware, and Shop Supplies
Пікірлер: 58
We'll continue to post these episodes here on KZread. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/trucks
@sierraray6584
4 жыл бұрын
PowerNation hey guys can you do an episode on return style vs non return style fuel systems? And at what point should someone start looking into a return style fuel system ( as far as horsepower rating) along with converting a non return to a return style? I’ve been told so many things and no one has gotten back to me on this subject. Thank you guys
@2LOCTL4L
4 жыл бұрын
PowerNation oops 😅 now that I see this video I answered my question lol great informative video thanks
I love watchin these guys. That Ford has a beautiful paint job. Jeremy killed it
Power nation and Stacey David’s gears are my favorite project shows.
Now this was an outstanding episode! You guys stuck with the same project for the entire video. Thank you :-)
I'm from indonesia and driving old chevy truck. thanks for reference to restoration my old truck
@wsfwsf1497
3 жыл бұрын
If I lived where you do, I'd be too busy surfing, to work on my truck!
*Truck looking better and better👌🔥*
Damn my Cable Provider to Hell for getting rid of the Channel that Powernation was on
Hmm... Finishing a custom paint job. Guess this is where my skills on the BBQ and Food Prep come in! Only tip I have is to put the beer in the Ice Chest first and ice 'em down all night long //I'll never be any good at paint :P
Nice!
thanks for all your works,,, im so excited i won this in the give away, i promise you'll never see a tire with tread, also i promise to always cold start with my foot buried into the gas so it bangs limiter for the first 30 sec each time, i will only use rotella, and fram........ also im going to swap the wheels to steelies so what ever i clear in profits goes to my meth...... have a nice day power block, i cant wait to recieve my new race vroom truck
Anyone else notice the rust on the inside during the headlight wiring install? 8:18 in.
@alexcorona
4 жыл бұрын
Douglas McDermand This is why the biggest car builders are in the south west(California/Arizona) no flash rust to worry about.
External fuel pumps are noisy because they are sucking air which causes inconsistent fuel pressure, the Holley hydramat eliminates the sucking air noise and inconsistent fuel pressure
Scott Bowers, if you get your hands dirty on this wiring job I will be really surprised. That shop looks like an operating room in a hospital.
For mie is the truk apache is numbers one the truk the look is beautiful the calandre in fleap sead is the beautiful cars
my grand pa has a 1948 ford f100 pickup that has been adapted from the original frame which had a flathead in tween it. well he put it onto a ford bronco frame, had to cut 10 inches off the bed so its a hare stubby but its his project truck, well it had no wiring so what is a old man who was born just over 70 years ago now, and he had 2 scrap ford broncos, well he takes the wiring harnes out of both and uses it in his project, as of wrighting this he has goten the turn signals wired up on all 4 lights, and thats about all he has for wiring. he dose have a audio system that he will put in but thats about it
Would you be able to do the entire truck with just those 3 polishing pads? And with only those 3 bottles of compound. I am planning to purchase this exact kit for my project car. Want to know if i should buy extra. Thanks.
Put a ponytail on Jeremy and he'll look just like the drunk guy trying to buy more beer😂😝
@ViperSRTnACR
4 жыл бұрын
Man alive, I completely forgot about that clip! Announcer: "Next on Truck Tech, check out our hidden camera footage of Jeremy coming in hammered after hours, trying to make his way through the shop, does he make it!?"
@edwintorres4614
4 жыл бұрын
@@ViperSRTnACRI'm LMAO over here!
I believe he is from Canada.
Hmm going over the top may cause problems with the bed due to the heat. It also creates more friction loss due to the extra bends.
@joshuamcpeek4708
4 жыл бұрын
Going underneath reduces ground clearance and making a 3 inch monster hole in the frame is a bad idea you'll lose alot of power when you hit a pot hole and snap the truck in half the best idea is to just put the exaust where it belongs, under the bumper or just behind the rear wheel
👍🏼
I don't have a pipe stretcher in my tool box either. Hmm...maybe I can find one on Google...
@wsfwsf1497
3 жыл бұрын
But my girlfriend does!
Yea man the heat is a major factor but u can’t baby it either
$7 roll of tape? He hasn't heart of the 99 cent store 😂 For a paint job quality tape is needed. For holding pipe together during mockup it's a waste of money.
No wipers on the show truck, is that normal for a show truck?
@bilbobaggins4710
4 жыл бұрын
Yep...Many customs delete wipers and use Rain X...
bro i cant watch, he doesnt blink and it scares me
3 inch exhaust seems like a waste when the header collector is 2.5 in.
@joshuamcpeek4708
4 жыл бұрын
You lose tourque when using oversized pipes, find pipes that fit your displacement and exaust valve diameters
Thé truk is marche pied ho no sir toue marche pied sorie no speak english juste litul toue marche pied is beautiful the cars truky fleap sead hummm y love it the look
Question on this build,I am assuming this is not street legal; I see no catalytic converters ? Or am I wrong .
@sinformant
4 жыл бұрын
Not sure about every state, but vehicles over a certain age didn't come with catalytic convertors from the factory, so they are exempt. My 72 c10 never had catalytic convertors, not sure what year they became factory installed here in the us. Just curious, where are you from?
Wipes off the Sharpie marks with the acetone. Go do it again.........
wait....i don't know anyone to modify my headers! how am I going to make them fit?
@Chris-yy7qc
4 жыл бұрын
DIY
I honestly couldn't tell a difference between the sanded and buffed panel an the non sanded panel
@Chris-yy7qc
4 жыл бұрын
Its hard to get it on camera... When seeing it with your own eyes you can easily tell the difference. No orange peel and no dustparticels in the paint after finishing.
gloves when TIG welding lol.
@irfp460
4 жыл бұрын
Enjoy your cancer.
My cars is one el camino 77 look 73 is motors 383 strokeur chevy supercharger wieland boite 350 turbo àutomatique pond 12 boulons is 580 🐎 yes ok for mie
Did I hear 7$ tape wtf
Why the overengergetic voice over?
@wsfwsf1497
3 жыл бұрын
It's actually an 83 year old woman, who has been smoking since she was 12. Can you tell??
Where did they get the robot voices who teaches them to talk like that I tell you cars a great Voice suck please can we talk like normal human being
He said get out in the field and get your hands dirty. Their nothing dirty about this truck.🙄
Tips for budding television talent. Just say a couple words... Make a short pause. And then say a couple more words.
Start with a 3m woolen superpad and 3m products not these tiny bottles of crap.
@bilbobaggins4710
4 жыл бұрын
Yeah big $$$$ supplies... The average DIYer isnt gonna wanna invest 50$ o buff their paint
i swear ole boy looks just like the annoying orange.
First!
Looks like a plastic truck..