Tell us about yourself! Take our Viewer Survey! www.powernationtv.com/ytsurvey

@bigmarkdarula

4 жыл бұрын

PowerNation done did it

@bowtiebuilding

4 жыл бұрын

I watched the video with the tranny swap and went looking for the next one and couldn’t find it till this AM. Nice turbo install, can’t decide whether I want to go pro charge or turbo charge. You guys might have helped me make my mind up!

@bowtiebuilding

4 жыл бұрын

Maybe I missed it but I didn’t notice y’all messed with the fuel pump?

@Thelongmanable

4 жыл бұрын

PowerNation *_That suck it could of easily done 20 psi.. YOU PEOPLE DON'T HAVE A CLUE HOW TO GET RATINGS..._*

@Thelongmanable

4 жыл бұрын

PowerNation *_

Annoying waste gate noise. 😂 That’s the best noise imo.

@90lxfox3

4 жыл бұрын

Thats what i said when i heard him say that

@mericafreedomland3583

4 жыл бұрын

Exactly what I said as well lol I was like your not a real car guy are you?? If you think thats a annoying sound your wack hahaha

@nzzs203

4 жыл бұрын

It's not the waste gate that's annoying here... It's the goofy a$$ way both of you talk! Hard to explain, just weird... Anyone else notice that?

@parallel299

4 жыл бұрын

Not real rev heads 😂😂😂🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

@jb34304

4 жыл бұрын

Yeah but that is why the truck is named 'Project _White_ *Noise* '. If you have ever been in a small town. There are a certain group of people who hate noisy vehicles. Then there are another subset of those people who have the coal roller deisel variants of these, and they hate the ricer blow-off valve vehicles. Almost as much as they hate Teslas and Prius's...

500hp for the Mamalona, not bad cuhhh 💨

@sfsmg5171

4 жыл бұрын

Junior Júnior no quema cuh I have the exact same truck with a turbo and it only spins but no quema 😔😂

@35POSTCARDSS

4 жыл бұрын

🤣

@Itsme-mx5tl

4 жыл бұрын

They could have just put a cam a turbo and fuel injectors and made that much horsepower and some

@haydenreyes4621

4 жыл бұрын

@@Itsme-mx5tl they did

@ericrivera5475

3 жыл бұрын

Yea 500 to the wheel is really good , it was only on 8 lbs too if im not wrong still room for more on this baby , really got my attention cus I have a 2012 single cab 5.3 on bolts exhaust and e85 so this would be fantastic! 🐌💨

"This polished aluminum takes away from the sleeper aspect.... "meanwhile big ass turbo sitting on the passanger side of the engine lol

@far1002

2 жыл бұрын

It’s an catalytic converter cooler 🤣🤣🤣.

@jaimenunez4805

4 ай бұрын

I was looking for this comment 😂

@ricardometalhands

15 күн бұрын

Use the kilo of coke your smuggling to hide it. Project white nose

All the CUHHH’S watching this video

@yonkymonky

4 жыл бұрын

no quema cuhh

@I5ZQ8

4 жыл бұрын

Esta si quema cuhhh

@teds4983

4 жыл бұрын

More like Juan's

@PincheBrew

4 жыл бұрын

And taquaches

@eduardogonzalez5449

4 жыл бұрын

Puro takuashiando cuh

"annoying" and "wastegate sound" don't belong in the same sentence.

@MirageTactics

4 жыл бұрын

This annoying host doesn’t like the wastegate sound. That sentence seems accurate to me.

@the-mighty-taco

4 жыл бұрын

@@MirageTactics you got me.

@billyray4716

4 жыл бұрын

To each their own. It makes me gag. Supercharger only for me

@35RSkyline

4 жыл бұрын

Agreed

@35RSkyline

4 жыл бұрын

@@billyray4716 Iv never understood the point of robbing power to make power. Turbo is the most efficient way to make power. Superchargers sound amazing and the instant power is great but. I guess everything has it's downsides.

Basically an H-Town tequache.

@BagboyGrubbin

4 жыл бұрын

NA FR CUHHH

@BagboyGrubbin

4 жыл бұрын

I’m straight out of Houston cuhh

@joshualightning9649

4 жыл бұрын

*TLACUACHE

@oglokz1664

4 жыл бұрын

Except without the turbo, just stock

@stephenwalker4348

3 жыл бұрын

Everyone in H-town watching 👁👄👁

“Annoying waste gate sound” 😤😤😤 it’s the sexiest part about a turbo installment

@I_like_turtles_67

3 жыл бұрын

No. The tire burning torq is the best part.

I swear if you closed your eyes you'd never know which host was talking on this channel.

@luisbravo495

4 жыл бұрын

Anoying talk like hillbilly

@be8zywordpl8y68

4 жыл бұрын

🤣🤣🤣🤣

@DMD81773

4 жыл бұрын

The worst was joe elmore.

@ozzygilliam9194

3 жыл бұрын

@@luisbravo495 better than an entitled city slicker, feller!

@DrFiero

2 жыл бұрын

At least Pat is coherent, intelligent, and sounds articulate! Mainly because... he is!

i like to imagine they go home and just talk like that as if its normal

Just did this same setup on my 2010 Sierra . We were able to get 492 HP Max . Swapped out the K&N intake for a Corsa coupled with a Corsa exhaust. Now up to 512! Thanks for the vids man keep em coming!

@arturogonzalez383

2 жыл бұрын

How much did you waste overall?

@KidDynamite6

2 жыл бұрын

@@arturogonzalez383 lmao..im sure its a fun truck tho..i jus dynoed my X3M comp after bm3,dp, and intakes w e30 and she turned 624 620 and 628 for all three runs

Trump stickers are 600hp each to the rear wheels. I have 4 on my tailgate and now I have so much power when I stomp the gas the airbag comes out.

@HHCHunterYTC

4 жыл бұрын

yeeeeeeeehaw

@Does_it_come_in_black

4 жыл бұрын

Hehehe 😂

@alecbaldwinsnotpropgun

4 жыл бұрын

Bigley power

@SHELBYJOSE38

4 жыл бұрын

I'm definitely interested Bro!! PLEASE let me Know where You got them!!!

@Sandman1832

4 жыл бұрын

Haha, my son Ian put a couple on the rear window of my new Duramax 2 days. I seen him in the back of my truck and asked him what he was doing. He was like, adding some more horsepower to the new Dirtymax. I had some ass hat smash the rear window out on my 08 dually back in April of 2017 because I had one of those big transparent Trump Pence vinyl's that covers the entire window. I wish I would have caught the snowflake who did it.

I want to see more about the fabrication of the exhaust system. Taking a 4" duel engineered for a different application and modifying it for your needs would be a great episode by itself.

@forpointsix4.678

4 жыл бұрын

@Wikkitt KlownThis witty spell check shame you have is top notch. You really showed my phones voice to text program who's cool.

@RotaryCrossType7

3 жыл бұрын

@Wikkitt Klown Grammer

@RotaryCrossType7

3 жыл бұрын

@Wikkitt Klown Spelling. 😏

@RotaryCrossType7

3 жыл бұрын

@Wikkitt Klown 10-4 neighbor!

Man I waited thru whole video to hear the start up and idle, rev ECT. Wanted to hear that exhaust and turbo. Especially the cam idle. Cmon guys.

@musclecarsdaily3020

3 жыл бұрын

Did they even put oil on the new cam? Lol

My suggestion is replace the oil pickup tube o ring when the pans off

@jeff4232

3 жыл бұрын

And make a bracket to utilize the second bolt hole for the pickup.

@cyriously_nick2191

3 жыл бұрын

Just did the oring last weekend, took 3 days on my 2500 and was a nightmare.

They painted parts under the hood to keep it a sleeper.... Why would you open the hood of a sleeper!?

@Tungsten23

4 жыл бұрын

Stephen Hodge loo sleeper but that giant intercooler is visible from the grille

@stickit2theman1

4 жыл бұрын

Imo they lost the sleeper status when they lowered it

@eizzle78

4 жыл бұрын

I kinda thought the same thing. It’s going to be kinda obvious with that turbo sitting right there in your face

@robboss1839

4 жыл бұрын

Colin but it’s a black 76mm turbo so it could “easily be confused” for a stock GM truck part. Just say it’s an “Ecoboost” 5.3 Silverado

@eizzle78

4 жыл бұрын

Mike Honcho but If it was factory gm you’d be replacing it every 6 months!

ahh weekend job for avearage guy...ahh yea we all have lifts in our garage

@rossprice4077

3 жыл бұрын

Some portable lifts and jacks will do 6-8 inches

@kalijasin

3 жыл бұрын

Yeah, and $1,000 for new injectors, catch can, new exhaust all the way around, MSD, tuner, etc.

@haydenreyes4621

3 жыл бұрын

@@kalijasin I added the msrp for all the parts not including labor cost and it was around 20 thousand not including buying the vehicle

@haydenreyes4621

3 жыл бұрын

$24,358

@chrisvids1820

3 жыл бұрын

Shoot I live in an apartment with no garage 😂

Don't you always love that.. the one that stood out, value and quality! Reality; the one they got for free for showing it and making it sound good.

Damn....I wish I had their tools.

@tomnekuda3818

4 жыл бұрын

@Higlyde 777 Yup....you're right. I'm an old geezer with a garage full of tools but these new rigs take another tool, another tool, etc...you get the picture. About the time you catch up.....well, a fella needs ONE more tool......

Thanks for all the great info. You guys are the best. I've learned a lot just by your videos

@sarahaguilar1719

3 жыл бұрын

U tube university.

He said annoying waste gate noises. I love that sound

Dudes wanna paint the intake tubing to make it less obvious things had been done, LoL, but the turbo is in the engine bay, SMDH!

@sinformant

4 жыл бұрын

Ikr! So when you step on the gas and thing whistles no one will even second guess it right? 🙄

Next, they should compare this to a Supercharger. Compare the kit, installment, and PRICE as well. AND of course Horsepower!

Lots of great tips. Especially the painting Al tips.

Im a ford guy, but those ls engines are something else👍👍👍

@edgardzzz925

2 жыл бұрын

those coyotes tho

You guys make it look so easy

they said something that could be done in your garage or on a weekend 😂

@Dunkaroos248

4 жыл бұрын

Well with $40,000 worth of tools and trade school experience

@I_like_turtles_67

3 жыл бұрын

If you got the tools. Some aderal & a game plan. Seems legit lol.

11:38 love the backyard axe stand paint booth 👍😜

I love it! That power out of 5.3L. I have 06 silverado low miles and clean I was thinking of putting turbo on it.

Did he say annoying waste gate sound smh🤦‍♂️🤦‍♂️🤦‍♂️

Him: Alright lets get this on hook . Me : i am hyped to see the test drive . The episode suddenly finished Me : OK? .......OK? Him : subscribe

Had a tricks performance stage 2 about 4 years ago but I had a reg cab Sierra 2wd with a 6.0 liter lq4 and 4l80e. Sold it wish I still had it. . I like the powerstroke exhaust idea that was the only real issue I had was back pressure.

Just finished, great video. Subscribed.

The whole kit in Merica is 799.99 in Canada it's 10k

@mattcat234

4 жыл бұрын

Canada sucks

@69yenko65

4 жыл бұрын

@@mattcat234 with Trudeau running it, yes it does

@DK-pj4wt

4 жыл бұрын

@757WN your welfare get shut off scooter?

since when gringos turn into talkuaches

@whatevermechanics

4 жыл бұрын

Armando Diaz were just getting into man

@DJCuhhhstin956

4 жыл бұрын

guess youve never heard of moon shiners

@javi1373

4 жыл бұрын

This is nothing new! It's new to takuaches

@GRTFrank7

4 жыл бұрын

LMAO

@nessar2378

4 жыл бұрын

Tacuaches never have turbos 🤦🏽‍♂️

Just scrolling through to read all the expert opinions on the automotive world!

That dude did my tuning. Peitz is awesome!

Takuaches: Thank you to all the subscribers for sticking around for these two long years to finally put a turbo on my truck. The time, money, and pain into this project was worth it. Power nation: what should we do for the next episode?...

@kimberlysanchez3418

Жыл бұрын

Turbo the tractor cuh

@MiguelAngelPerezRodriguez09

Жыл бұрын

si quema kuh

I like how they said you can do this in a weekend lol

@yourface3154

Жыл бұрын

2 12 hour days, and know what you're doing and not working the customer for mechanic hours, probably can.

Amazingly done

Seems so easy amd straight forward

@edgardzzz925

2 жыл бұрын

with the tools they have of course , it’s hard on a budget

I like these vids but do they really have to talk like scripted dorks all the time?

@RIPPERTON

4 жыл бұрын

You need Westen Champlin

@talon0863

4 жыл бұрын

@@RIPPERTON David Attenborough or Bart Simpson?

@RIPPERTON

4 жыл бұрын

nope. Zip Ties and Bias Plies. not scripted cuhh

@talon0863

4 жыл бұрын

@@RIPPERTON yep, not scripted would be way better

@connorw4390

4 жыл бұрын

@@RIPPERTON 'Zip Ties and Bias Plies" That guy is a massive plug.

Painful to listen to them talk/read lines. Like a formula of high notes and ending each sentence on a low note.

@SlowGoat54

4 жыл бұрын

I. Am. A. Robot.

@TheKieser81

4 жыл бұрын

Agreed. I 'm pretty sure the red haired guy is a robot.

@35RSkyline

4 жыл бұрын

Yea its annoying as hell.

@DMD81773

4 жыл бұрын

And always emphasize the word it at the end on a sentence.

Your guys episodes aren't very linear, it's hard to keep track of projects

Exactly what I need for my truck

They talk like they're reading a book to a group of preschoolers.

Imagine buying 72lb injectors to find out the oem injectors decapped do 75lbs for free

@JingleBop

4 жыл бұрын

Decapping ruins the spray pattern which results in less fuel efficiency and less power. Do it right the first time

@JingleBop

4 жыл бұрын

Also results in non flow matched injectors

@cbr1thou

4 жыл бұрын

Only if u flow match

@turbolq4

4 жыл бұрын

Also says it's e85 capable. Those injectors aren't big enough to feed that engine e85.

Keep up the good work. If you are still there.

That's the dude that tuned my challenger very chill guy

Y’all really went through the trouble of painting the thing when you don’t really have to pop the hood for it to keep its sleeping secrets

Sounds great. Love the black painted parts. Looks stock sleeper.

From what I gather concerning the spring combos. With the 5 springs (1.3, 2.7, 5.6, 9.4, 18.8) if you mix and match you can create the following boost levels 1.3, 2.7, 4, 5.6, 6.9, 8.3, 9.4, 10.7, 12.1, 13.4, 18.8, 19, 20.1, 21.5, 22.8, 28.4, 37.

"annoying wastegate sound" every Millennial: **AUTISTIC SCREECHING**

Was the fuel pump upgraded just injectors? For your 8lb setup

How many miles on the rings, when you started and when you upgraded?

Hey guys that vid is cool. Have any of you ever run across a 5.3 platform that just shuts off going down the road then once you put in park and turn the ignition off for about 30 second you can start it back up and sometimes go a few more minutes or miles with out a repeat shutdown. And not throw the check engine light. I've been racking my brain for weeks on my 03 Yukon 4*4. Thank you for your time.

Very good video, subscribed. 👍

2:34 annoying waste gate sound !!!!

@mrschwifty5564

4 жыл бұрын

lol was thinking the same thing.

@1986Honda4trax

4 жыл бұрын

abode550 lol i didnt know they made much noise

@alphaforce6998

4 жыл бұрын

@@1986Honda4trax They can flutter and cause a stuttering effect if the valve tension is a lot less than the average boost of the engine.

@kevinspencer751

4 жыл бұрын

That's the sound I want out of a turbo wtf

You need to make sure you have the proper ring gap to install any power adder. If not the gap will close and you will rip the top off a piston. Then you have a boat anchor.

@jtr499

Жыл бұрын

Came to the comments looking for this very point. I have said boat anchor on the engine stand.

@joew7897

7 ай бұрын

So company's like edelbrock shouldn't sell bolt on superchargers that make 8-10 psi on unopened engines? Ring gap matter more for big power and bad tuning.

This is sweet!

Super dope!!!

*_That motor could handle a 20 psi hit what a load of BULLLL_*

@broshak9384

4 жыл бұрын

It can easily

@Thelongmanable

4 жыл бұрын

*_If they did that this show would hit 50 million viewers in a day.. They don't know how take things that extra knotch for ratings... A real KZreadr would of push it up till knock then backed it down..._*

@02autogt

4 жыл бұрын

And blow up the first pass, lol!

@tristankrager9789

4 жыл бұрын

I didn't see a fuel pump upgrade. They likely ran out of fuel and didn't wanna roast the 4l80

@Thelongmanable

4 жыл бұрын

*_Everything is fishy about this video, like really STANK!!!!_*

I just woke up didn’t expect to be this early lol

Most professional shop on KZread

Sick!!

Why would 1.8 lbs boost even be an option?!?!

@turbolq4

4 жыл бұрын

Towing.

@jameswilson8907

4 жыл бұрын

I think it's mostly to add to other springs. Like say you're running a 5 lb spring but wanted 7bls of boost.

@maxwelllevy5760

4 жыл бұрын

@@jameswilson8907 all the springs

@cyriously_nick2191

3 жыл бұрын

@@maxwelllevy5760 weld wastegate shut.

I just bought a 2011 Silverado in July. I watched this with great interest, but mines a 4x4 and would require more mods.

@chaoszombie9995

4 жыл бұрын

archiveseeker that would be fun to launch :P

@disdude7338

4 жыл бұрын

Check out @boostedjuan on Instagram he has a sick 4x4 supercharged f150 it hauls ass

@broshak9384

4 жыл бұрын

@@jglew82 and all the broken tie rods! Lmao

@chemicalnbc5820

4 жыл бұрын

@@broshak9384 They have upgrades for that problem now.😉

Very nice 🔥🔥🔥🔥👀

nice the faster wear on your engine

You used a press to apply 10 pounds of pressure .

@nathangregory9002

4 жыл бұрын

I was thinking the same💀💀😭

@EGGINFOOLS

4 жыл бұрын

Yeah. It did it evenly

Think about this. The weakness of Turbo's is the bearings. Oil lubricates and cools the bearings. Bearings will generate a temp of 30K degrees. After cooling and lubicating the bearings, oil loses all of it's lubricating properties. Change oil often.

@joew7897

7 ай бұрын

In what world is that turbo getting to 30k degrees? 🤣🤦🏼‍♂️ like there aren't factory turbo vehicles from every manufacturer.

I wish theses guys would do this to my 05 6.0

Cool mods

Very awesome. Sadly for my truck (98), the 5.7 vortec doesn't have such love from the aftermarket.

@kdsboosted4954

2 жыл бұрын

You can build a kit for anything. Build a kit slap a holley efi or fitect or something on it and your off.

@teaguegearhart9851

Жыл бұрын

LT has KZread kzread.info/dash/bejne/X6OWpqmAhMSrgrQ.html&feature=shares So much better than powernation

@joew7897

7 ай бұрын

Yeah, no one builds parts for the small block Chevy. Wish someone would.

Doing my 07 lh6 with twin turbo 2.5 inch turbos and dual exhaust with an x pipe with cherry bomb dual in and out muffler.

Freaking badass ! Makes me want to turbo my 05 suburban !

@rcairforceone

4 жыл бұрын

I'm going to boost my 2009, but I'm going to build a custom bottom end first. Nothing crazy, but definitely forged rods and pistons.

So I am wondering why they didn't upgrade the fuel pump? I am guessing that is why they only made 500HP instead of the 600-650RWHP they could have made with this kit.

@obviouslyhenry2233

11 ай бұрын

I’d assume cause they are trying to make it a daily and that mod would put it in a shoot for a couple of days

Did I miss the part where you explain how you're running 5 PSI initially with a 10 pound spring in the WG?

@somebodyyouusetoknow4532

4 жыл бұрын

Wondering the Same

@sinformant

4 жыл бұрын

They just pedal the gas😂

@b18c5integra

4 жыл бұрын

Boost controller

@sinformant

4 жыл бұрын

@@b18c5integra I don't think you understand how things work.... If there is a 10psi spring in the waste gate, it will hold till 10psi. A boost controller simply limits the amount of vacuum to the waste gate to keep it from opening till a higher boost level. It doesn't lower the boost level lower than the spring in the waste gate.

@xishootstuffx

4 жыл бұрын

b18c5integra boost controllers can only increase boost over spring pressure, not open the wastegate anytime.

Good tuning

It's not a turban, it's a turbine 😂

Why do they talk that way? Who's the writer ?

@Secretcircuits

4 жыл бұрын

N. Vzla their cadence is so infuriating.

@epicswag5509

4 жыл бұрын

That's exactly what I think every time I listen to these vids.

@Icutmetal

4 жыл бұрын

N. Vzla Yeah, the chemistry is like oil & water.

@markw2917

4 жыл бұрын

Don't you want BiG BAd DYnO PoWER!?

@thomasjenoski134

4 жыл бұрын

doesn't it feel like this is a video from the early 2000s?

426 on base tune is not bad, 10lbs of boost puts that truck a little over 500hp, might have to start looking into a turbo for my Escalade, I’m running 470ish hp with a stage 2 Texas speed cam, really thinking a good turbo on it will push it close to my mark of 600hp with stock bottom end in my 6.0L LS. Plus I’ve gotta fill the gap in hp that the new transmission can hold, I mean I didn’t spend 5 grand on it for nothing am I right? Lol

these mans have verry strong accent

i like your guys OE style

They look stupid while reading from the TelePrompTer 😂⚠️

@BigEightiesNewWave

4 жыл бұрын

You look even worse .😂

Could easily make 900 rwhp on that stock bottom end 😂 and they’re satisfied with 500

@bilbobaggins4710

4 жыл бұрын

Engine Masters made 571hp naturally aspirated 6.0 LS ....Stock heads and bottom end

@AllendeNL

4 жыл бұрын

The Executioner not hard

@omegared8663

4 жыл бұрын

@@bilbobaggins4710 at the crank

@spareparts7630

4 жыл бұрын

Probably because with the way the truck is set up now it isn't going to hook anyway. 400 more hp would just be a waste unless you spend all day everyday doing burnouts.

@combee23

4 жыл бұрын

500 wheel is a lot of power

Nice Brother

Sleeper 💯

Did they throw the cam in dry???

@aaron7520

3 жыл бұрын

Yea rip to “flush tappets"

And they rarely if ever tell you price of these kits. I want to know price all in when it's done.

@bowtiebuilding

4 жыл бұрын

ddixon72 it’s about $4650, minus the optional T-shirt.

@sinformant

4 жыл бұрын

@@bowtiebuilding that's not a bad price at all. Hell a slightly bigger turbo for my car is 75% of that

@ddixon72

4 жыл бұрын

@@bowtiebuilding But do you get stickers with it? No stickers no deal!

@jonathankillingsworth5469

4 жыл бұрын

@@bowtiebuilding That isn't including the injectors, coil, and fuel pump upgrades though I don't think.

@fishstickparty

4 жыл бұрын

@Seymour Kuntz well you need fabrication tools (and skills) if you're going to really do a lot yourself.

Ok now I'm pretty sure between youtube and my phone its reading my brain waves now. I haven't looked anything up that is car related in months an get a thought popped into my head literally like 30 mins ago an now this video is recommended on my browser.

Like the dude below me said, "that annoying wastegate sound," IDK what wastegate sound this dude would be referring to, but my 612 whp 1.8L DOHC VTEC turbo Honda Civic has a 60mm Turbosmart Powergate and sounds SO AMAZING under full boost when the wastegate opens to bleed off pressure. I have had multiple wastegates on it over the years from an eBay junk 38mm to a 38mm Tial F38, and now finally a 60mm Turbosmart that cost me over $600, and while the Turbosmart is the best working unit, I have never complained about the sound being annoying. I have also had a few different blow off valves on it as well, and now it has a Tial Q50 50mm BOV and it also sounds amazing. The only BOV that I didn't really like was the HKS SSQV II that I had on it that would give off a loud chirp when it blew off pressure. Due to the high boost pressure that the car runs, as well as the 90mm throttle body and 3.5L Skunk2 Ultra Race intake manifold, the car now has all 3" intercooler piping and front mount intercooler as opposed to the 2.25" piping that was on it. All of my piping is one piece piping. I spent my late teens when Fast and Furious first came out in the early 00s, so I always wanted to build an import, and this Civic is my built import (I've also built DSMs and I built a Dodge Colt hatchback with a 4g63t in it, as well as my old 74 Camaro Z28).

That's a lot of work for 8lbs of boost. I would have used the blue Spring.

@mathewhunt81

4 жыл бұрын

i would have taken the red pill

Where the cuhhhhs at?😂😂

Oh boy im about to buy a 2010 silverado

Thank you Boosey for the Turbo Charger....

Alv cuhhh si quema cuhhh puro takuachiando cuhhh aver el 5.3 cuhhh Alv cuhhh onta el cuhhh me la empresta pal truck meet cuhhh ándale apá

Sloppy mechanics would have made more HP with less $. I guess when your sponsors pay crap you can buy whatever

@RotaryCrossType7

3 жыл бұрын

What's the price for all of that bolt on goodness?

@agoogleuser1188

3 жыл бұрын

@@RotaryCrossType7 look up sloppy mechanics on KZread they can do an eBay turbo kit and a 6.0 LS and make like a thousand horsepower

@estebanmonell4715

2 жыл бұрын

lol making 1k on a stock 6.0 for 3 runs isnt shit

Yea aluminum is a pain to paint. I found that out trying to bedline my new skid plates..... Luckily it was a self solving problem. Couple off road trips and the second attempt is sticking just fine.

Good power Cuh, going to be first to the taco stand.