Custom Toy Makeover - Halo Master Chief Action Figure and Diorama
Ойын-сауық
I got this cool toy Master Chief action figure from Halo as a Christmas gift and knew I had to do a custom toy makeover as well as a diorama. The diorama was a bit of a struggle but in the end I have a pretty cool Halo Master Chief figurine/custom toy. The legs on the Master chief didn't move so I had to do some custom work but it wasn't bad. The custom paint on the Master Chief turned out really cool!
I hope you enjoy this custom paint job and diorama!
Thanks for visiting DR Toys, have a great one!
CITADEL AIR: VULKAN GREEN
Пікірлер: 97
🔥🔥🔥🔥🔥👏🏽👏🏽👏🏽👏🏽👏🏽 Yes, now he is ready!
@DRToysCreations
2 жыл бұрын
YES!!!
It is a great day to be a toy nerd. Nice work. You'll get there with your diarama game. It's all about the paint...
@BullScrapPracEff
2 жыл бұрын
kzread.info/dash/bejne/pImLzKh6ftqXibw.html
@DRToysCreations
2 жыл бұрын
Yeah, I noticed as I just pushed through it got better... I just have a hard time seeing the end result. Thanks for the video link, I'll check it out.
Great job posing the figure with the heat gun. Could have gone horribly wrong but you were careful and it really paid off.
@DRToysCreations
2 жыл бұрын
I could have easily ended up with a puddle of green plastic... that heat gun gets REALLY hot! 😂
DUDE! This looks absolutely phenomenal! 😁👍
@DRToysCreations
2 жыл бұрын
Thanks!
I am a really big fan of Halo I have played all the games online awesome action figure once again good job you're the best
@DRToysCreations
Жыл бұрын
Thanks so much!
Awesome results in the green ! Looks epic
@DRToysCreations
2 жыл бұрын
Thank you! Yeah, it worked out pretty great!
This this why the spartan collection infinite cheif is a better choice
I hate how so many toys now have limited articulation now. But makes a great excuse to work on a custom project. Nice work!
@DRToysCreations
2 жыл бұрын
I'm 100% with you... It seems like lazy toy design, although I sure it's all a manufacturing cost thing...
Super cool paint work 👌
@DRToysCreations
2 жыл бұрын
Thank you so much 😀
I wish Ash, Cheryl Williams (Evil dead/Army of darkness) or Josh McGrath (Max Steel) or Action Man (1993), Lina Inverse (Slayers anime), A2 (nier) & bree bunny (enchantimals) had alternate versions in Halo
Great job Doc
@DRToysCreations
2 жыл бұрын
Thanks!
Looks Awesome great heat gun technique !
@DRToysCreations
2 жыл бұрын
Thanks. I wasn't sure if it would work but I lucked out. 😂
I wish there was a larger Grunt figure like this
@DRToysCreations
2 жыл бұрын
That would be awesome!
Very, Very top man !!!
@DRToysCreations
Жыл бұрын
Thanks 🙏
SICK!!!
@DRToysCreations
2 жыл бұрын
😀 Thanks
Good one.
@DRToysCreations
Жыл бұрын
Thanks!
Very nice!
@DRToysCreations
2 жыл бұрын
Thanks!
I completely sympathize with the diorama "poop/brisket" base. It's tough for me to do rocky earth too. My last one has been called a biscuit so many times 😂
@DRToysCreations
2 жыл бұрын
Fortunately it turned out in the end but wow there were some time I really questioned what the heck I was doing!!! 😂
Looks WAAAAAAAAYYYY better now than first out of the box. Love what you did with this. Your attitude is fantastic and your enjoyment comes through loud and clear. Really like the projects you post. Keep it up!! 😎👍🏻
@DRToysCreations
2 жыл бұрын
Thanks! Glad you enjoyed it! 😀
That was great! The figure is a vast improvement over the original one and it has a more realistic look to it. If I had not seen this tutorial I would have thought it was a vinyl figure. Thanks for sharing this.
@DRToysCreations
2 жыл бұрын
Thank you very much!
awesome looking diorama on the Halo figure
@DRToysCreations
2 жыл бұрын
Thanks!
The paintjob brought this toy to a different level. Congrats!
@DRToysCreations
2 жыл бұрын
Thanks. That was the most enjoyable part of this project.
I was thinking about making something like this!!
@DRToysCreations
2 жыл бұрын
Do it, it's very rewarding!
That was some really cool results with bending the legs& feet like that with a heat gun. I would have thought for sure warping beyond belief, but that's a nice finish look. Great job all the way around. I was really impressed with how you got the terrane to match his pose that well to boot.
@DRToysCreations
2 жыл бұрын
Thanks! The boot matching the terrane was just dumb luck! 😂
Nice, picked one up, hope it looks half as good as yours turned out.
@DRToysCreations
Жыл бұрын
You got this!!!
@lindamuvic8110
Жыл бұрын
slightly diferent@@DRToysCreations
Judging by the thumbnail, I thought this was gonna be the 6 inch figure; but that size makes it even more awesome! You keep on getting better and better! 😁
@DRToysCreations
2 жыл бұрын
Thanks so much! 🙏
great video!!
@DRToysCreations
2 жыл бұрын
Thank you!!
Thanks I never thought of using a heat gun to adjust the joints great job. I have a new ideal for a mech robot that a 3 3/4 figure can fit into using a eclipse 60 piece gum container think you might want to try it out to
@DRToysCreations
2 жыл бұрын
I have been thinking about something that would hold a 3 3/4 fig... I'll check out the gum pack. 👍
Total toy upgrade! Love it 🙌🏻💕
@DRToysCreations
2 жыл бұрын
Thank you 🤗
Thats so awesome. I love how yoi achieve these results with so few changes. Beautiful work
@DRToysCreations
2 жыл бұрын
Thank you so much!
I wish you could have done this on the Halo series.
@DRToysCreations
2 жыл бұрын
I would definitely love to do more Halo stuff in the future. 😀
Nice, my friend, came out like a high quality statue. Very Cool.
@DRToysCreations
2 жыл бұрын
Thanks a bunch!
@garzilla7123
2 жыл бұрын
@@DRToysCreations My pleasure keep the cool stuff coming.
thank you for this... my son was going to throw away his Master Chief toy - it is missing its gun and a leg has broken... I hope to be able to do it justice by fixing it and making it into a diorama.... he may even want it back - now its a few years later and the program is out... ;)
@DRToysCreations
2 жыл бұрын
That's awesome... If he wants it back make sure to charge him for all your work! 😂 Have a great one!
Those sold out at A $5 Five & Below store in December & November
@DRToysCreations
2 жыл бұрын
Did you get your hands on one?
Great job! What is the last tune playing, if you don't mind me asking?
@DRToysCreations
Жыл бұрын
Not sure to be honest... a freebie on YT. : )
A figure that size and they don't make the legs with articulation. Weird! even the smaller halo figures have full articulation
@DRToysCreations
2 жыл бұрын
Right! I thought the same thing... Must be a cost thing in the manufacturing. Oh well, gave me a chance to make it cooler! 😂
This is really cool and im trying to do the same thing your doing so can you please tell me the paint your using
@DRToysCreations
2 жыл бұрын
For the elbows I just used a cheap craft paint from Hobby Lobby, the green was Citadel as well as the silver for the edge weathering. The black wash was also Citadel Nuln Oil.
Can you make more Star wars custom figure sir?
@DRToysCreations
2 жыл бұрын
I have a few on my to do list. 😀
@CaptainAew
2 жыл бұрын
@@DRToysCreations That's amazing! I can't wait to see it!
What Brand of silver did6iu use in the Weapon
@DRToysCreations
2 жыл бұрын
I actually got the silver paint at a yard sale but it has honestly been the best silver I have ever used! Design Masters - Premium Metal - Super Silver
What paint do you use for the silver?
@DRToysCreations
2 жыл бұрын
It a Citadel Silver. Ironbreaker.
This made me wonder why we're here
@DRToysCreations
2 жыл бұрын
😀 I guess to make cool stuff!😂
@2jdestrodegr15
2 жыл бұрын
@@DRToysCreations it's a RedvsBlue reference 😂 (a webshow based off of Halo)
can you do wall e
@DRToysCreations
2 жыл бұрын
It's definitely on my to do list! Wall-e is one of my favorites!
I cringe at what Jazwares did to their 12 inch Halo line
@DRToysCreations
Жыл бұрын
Yeah, most of those 12in figs are pretty rough!
This is my comment
@DRToysCreations
2 жыл бұрын
Much appreciated... 😀
The fake voiceover is really off-putting, it's obvious you're recording your voice after already doing everything, so your "genuine reactions" are super weird. Just tell us what you're doing instead of pretending you're doing it on the spot.
@DRToysCreations
2 жыл бұрын
👍
I wish Ash, Cheryl Williams (Evil dead/Army of darkness) or Josh McGrath (Max Steel) or Action Man (1993), Lina Inverse (Slayers anime), A2 (nier) & bree bunny (enchantimals) had alternate versions in Halo