From one shipping crate into another…

@joecummins59

Ай бұрын

Man your doing awesome things in the diesel world if your ever near north carolina hit me up got a small wrecking yard have 8 running cummins myself and 30 more parts trucks big fan of urs Edison is doing amazing stuff too would love to be a part of it

@whitlcj1

Ай бұрын

I'm sorry... I have to say this. If Ram comes out with a diesel electric hybrid 2500 series pickup or cab chassis called the ReCharger, it'd be an actual step forward in this world. No bells and whistles like a cybertruck or these random hybrids from kia and Hyundai. Just a truck for truck's sake.

@angusandleigh

Ай бұрын

@@whitlcj1 It's already in the works. 2025(?) Ram 1500 REV (Range Extended Vehicle). The truck concept that these guys are doing is the same idea, except Ram is using the 3.6L Pentastar as the genset prime mover instead of a diesel. I suspect because it's their engine and it will be more user friendly in cold climates ...but that's my guess. They could've easily have used the Eco Diesel as the genset power plant as well. What Edison is up to is a great idea, as it will allow what Ram is doing - in my opinion the ONLY way a truck from a 1500/150 series to a tractor - to use electric motors. No need for a charging station, although Ram says that you can still plug it in too. The other side bonus (and I would assume Edison is/will be doing as well) is offer ...like the other EV trucks have, electric power take-off so that the truck can be used as site power. The huge advantage that Ram (and potentially Edison) has in this usage case is that when the batteries are low, all you need is more fuel. Also, both versions should be able to (even if it's only a software update to make it work) is like the Chrysler ENVI program from the early 2000's, the engine could just be used to charge only, running on just batteries until they are low. I think that I read that Ram will keep the 3.6L running all the time, albeit at a consistent RPM where the engine is at it's peak efficiency, so like a locomotive but the batteries can act like a buffer to smooth out demand loads on the genset. It shouldn't take more than an update to give you operation modes. ...Edison will allow you to do what a MFG is doing on a new truck, but give you the same abilities in powertrain, but in your old iron too, and that's very cool.

@kermitshld

Ай бұрын

Two online prices for Cummings R2.8. (From Cummings.). -- 10,098 and 18,000 both US$

@deddie4645

Ай бұрын

Is that an Italian engine? c***

Guys…., I’m sure there is A LOT of us looking forward to this kit. Keep the videos coming please.🙏

@__WJK__

Ай бұрын

I'm right there with you!

Do you need 160hp to run the generator? That 2.8 comes as a 74hp that passes epa without after treatment.

I love how quickly your videos move. They have a great pacing and you cover a lot of ground! You waste no time getting down to business and keeping things rolling. I always love how much you squeeze into a video imstead of showing a bunch of silly details to pad your videos

I have no idea how you keep all of these projects straight. There is so many going on at once. I'd be lost 😂

@1one3_Racing

Ай бұрын

He just watches the videos

@bryanst.martin7134

Ай бұрын

It's the camera man.

I was planning on installing one of these Cummins R2.8 crate engines in my '96 Jeep ZJ project vehicle. The engine being 50 State compliant up to '99, is perfect. I live in California, so compliance to the rules is the only option. I was planning on using a ZF 8-speed or the current 6-speed stick. But now, the Edison Motors drive system seems interesting. I have an '03 Ford Explorer with all modes being 4wd. When I bought it new, I considered that at some time it may have electric drive front and rear. I really believe that Edison Motors and the Ram Ramcharger are a better idea than Battery Electric Vehicles for any truck.

@jasonmurdoch9936

24 күн бұрын

Go to 6 speed stick shift

Hell yeah, I’ve been watching you for years and Edison since their beginning! What a collaboration 👍

Those Cummins engines are very known here in aus for the pickup tube to break/ come off in the oil pan and cause it to suck air and of course wreck the engine. Worth looking into a way to make it better

And so it begins. Can't wait!

I'm waiting for Peg to show up here

I'm putting this setup in a 64 Scout. 2.8, AX15 trans, passenger drop tcase.

@stopchangingmynameyoutube

Ай бұрын

man if you put that on youtube i would watch it

@bbroken1

Ай бұрын

I had a 68 800a that would be a cool combo. Shawn Murder Nova has a 800 series with a 4bt white and orange looks pretty sweet.

@stek96

24 күн бұрын

AX-15? What changes are needed to install this gearbox?

Rich. Your faith is apparent in how you act and treat others and everything around you. Keep it up.

Ecstatic to see the Cummins crate motor on your channel for this project!

I haven't been this excited about a project in a very long time!

I owned a 2017 Chevy Volt plug in hybrid for five years. The Voltec drive system isn’t just a generator in an electric car btw. It re-taight me a valuable lesson. That the more options one has equals more freedom. With two fuel options in my volt I have more freedom than a mono fuel vehicle will ever have. I’m excited for this truck project guys even though I’m only here for the music.

@jonathanwright5550

Ай бұрын

Thought Chevy volts were only battery powered??

@JD-yx7be

Ай бұрын

@@jonathanwright5550 That is the Chevy Bolt with a B. The Volt was always a plug-in hybrid, too bad chevy killed it

@Natedawgontheright

Ай бұрын

I think hybrid is the way to go. If we could get decent trucks,4x4s or suv to go this way, I'm in.

The oil patch people drove two wheel drive trucks and cars and the roads were dirt and mud. 4x4s became popular in the mid 90s.

@ExMxer3

Ай бұрын

4x4 is for People that can't drive

@porcupinepunch6893

Ай бұрын

​@@ExMxer3 That seems a little excessive

@thechadwick22

29 күн бұрын

While it is true, that at the end of every Jeep trail is a 1994 Camry that made it there before you, 4wd is certainly not only for those who can't drive. Lol. The number of people I've pulled out of snow banks because I had snow tires and 4wd alone..

Stoked! Cant wait to see this progress further!

The baby Cummins sounds good on the first startup! Can't wait to see how it does on a standard drivetrain before you go with the e-axles! This is going to be a very cool series Rich!😉👍👍👍

I've been waiting for this colab with you and edison

Actually, the MAF goes on the cold side of the CAC piping before your intake manifold. If you install it before the turbocharger, it's not going to calculate airflow correctly. This is how all of the new engines are setup, they have a MAP and a MAF sensor to calculate the fuel map in the ECM. If this engine harness doesn't have long enough wires, it's probably designed to have the MAF pipe mounted over top of the engine with silicone boots connecting the turbo directly to the intake manifold.

Neat idea for a Project !!

Can't wait to see the finished product.

Awesome can't wait to see more of this build

Really been looking forwards to this project!

I’m just excited for 4 wheel burnouts!!!! Chain it down!!!

Had a 1994 1500. It was my favorite truck. In fact it was the same color.

Fun project! I have a Cummins r2.8 swapped in my Delica van. Love the engine. My van weighs 6k lbs, shaped like a toaster, has way too short gearing and I still average 21 mpg going 70-75. If you want more power get the TDI tuner: 220 Hp and 400 tq.

very excited to see this completed

AWW THAT TURBO IS ADORABBLEEEE

This gotta be one of the most powerful crate in the world! 💪💪

Good Stuff guys! Thanks

my favorite era Dodge pickup i own 2 a V10 Ram 3500 dually and a 95 Ram 1500 V6 5spd manual short bed

So glad I got to meet you today. Thanks for taking the time to chat

What a nice primer/bleeder system they send with for you! That’s how all diesels should be 👍

Exciting project! I've always liked those trucks.

Man sooo exited, hope this project and ev/generator idea is a huge success.

Congrats deboss garage🎉 you deserve it.

Very exciting build

I know its not how you will be using it, but Im so jealous of that 2.8! I built my little truck in 2014, if I had to do it over again I'd do the R2.8. Thanks for sharing.

@jonathanwright5550

Ай бұрын

Hiluxs come with 2.8s???

@AdmissionGaming

Ай бұрын

​@@jonathanwright5550the hilux 2.8 is a 1gd not a cummins

@jonathanwright5550

Ай бұрын

Yeah i shouldnt have put question marks ​@@AdmissionGaming

Who ! I haven't been following You lately . Loved this video , thanks for the content . Putting you back on TOP of my list !!

This is going to be an exciting build!!!!!!!!!!!!

This is the best American you tube channel

@evertonmillet6696

Ай бұрын

Canadian

@andrewmeadows2596

27 күн бұрын

@evertonmillet6696🎣😂

Wicked cool project.

Such an epic project!

THANK YOU FOR DETAILED VIDEO

Those edison guys seem to know how to use chain binders really well.

Those rims are beautiful!! Beautiful t this is going to be the absolutely best build EVER!!!!!! I can’t not wait to watch this build all the way through

I'm excited to see how it'll go. Might have to do this project to a bronco I have sitting around

Start of an epic journey. I'm so excided to see what will happen! Perfect time to be alive!

EXCITED FOR THIS BUILD!!🎉 Would love to put a NEW Cummins Crate engine in my 07 Ram swap it for the hemi in it... EVEN BETTER, the swap yall are doing...

Those 360’s were actually a pretty good motor, real reliable and better power than a 350 Chevy. I had one in my 79 power wagon, converted to carbureted with an edelbrock performer intake and 4 barrel, bit of a lumpy cam. Sounded amazing and plenty of power! But yes I agree, terrible mileage and still just a gas motor, I’m really looking forward to this project! 👍

@ExMxer3

Ай бұрын

360's and 318's get terrible mileage because the 727-based transmission (RH/RE overdrives) is a power-sucking Turd. If you get one with a Manual or the 904-based transmission (RH/RE overdrives) the mileage goes up 2mpg auto and 4mpg on the Manual OD

@porcupinepunch6893

Ай бұрын

​@@ExMxer3 so the mileage is a little better, but still garbage

Love it, you build them, and I'll watch them.

really cool and glad your docing all the data

Gonna be a cool build again!

I can't wait for this build!!!

Another great video!!!

This channel is awasome, I learn so much, thanks again.

This build will be historic. And Andy is a gem.

Thanks!

Can’t wait to see more on this!

I’m excited to watch this conversion Rich it’ll be epic and this from an old school hot rod guy. 🇨🇦👊

Been waiting thanks for the update.

Love the data collection.

Finally! super excited

Quite the multi tentacled project..... I'm digging nerding out on the detail.... cheers from NZ.....

As a rust belter in ny watching this with my 2013 f250 literally rotting away. Shocked to say the least

I’ve seen guys love these engines and others say they are junk. I look forward to seeing this truck finished and see what it can do!

Excited to see this! I was just looking at this engine to repower a 1987 Dodge Raider.

That is a pretty work of craftmanship.

I’m really excited about this. This will definitely change the industry!

Rich, Im very excited to see where this goes. I believe a hybrid setup will beat a full EV in all regards any day of the week. Id run some fuel ox diesel catalyst right from day one in that cummins. Got to keep the emissions components happy and as clean as possible.

This is gonna be awesome!

I'd like to get my hands on that V8, after it's out, can't wait to see the end result!

THANKS FOR THE CONTENT> GOOD JOB

Twenty years ago, none of my gear head buddies believed me when I said electrification is just another tool in the box. One day, we'll all be sitting around, pondering how we can shove a bunch of batteries into a pick-up truck to deliver power and torque in ways we can't even imagine. And here we are today. This project is so fucking cool!

I’m just about as excited to see this happen and unfold.

Love this!

That rig is in unreal shape ( GREAT FIND ) it is the perfect Guinea Pig for this swap, CONGRATULATIONS.

Wow a piece of art

sounds like fun

Great video Rich, your channel is great and like how u involve your friends. Keep up the good work up there in the Great White North!!!

That’s pretty good

Seen quite of few of these as a Cummins Tech. They're usually in smaller industrial applications. So it will be very interesting to see what it looks like in a on-road automotive hybrid application!

With the Volvo S40 PS pump you can control the level of steering boost using a 0-5v ECU control. Work great.

Love this channel

I'm usually not a fan of intros but your's is sick. FYI, that 5.9L is a great hit ride engine, I'm sure you know.

I'm excited for this project. I have a 2011 ram 1500. I love my truck and I could see myself doing this swap. Mike

Cant wait to watch this. Really considering goin with the edioson motors.

Sounds good!

@GeFeldz

Ай бұрын

The 5.9 gasser sounds better, of course, no 4 cylinder can ever beat a V8 for sound =D

I have my deposit in with Edison. Can't wait to get it put into my 2001 GMC Sierra c3 AWD. 6.0l.

That truck is in great condition

@ExMxer3

Ай бұрын

Yep, sad it's going to get Butchered up.

Well done DG! Hope Mac.Univ.and Research do you right. They have all the toys! Cummins sounds great! Look fwd to e axels and drives!..all the best PB. DUNDAS

Gonna be sweet!

Love it

Good rotella oil I couldn’t agree more

I work in a underground mine that is limited on air down below a certain point. I really wonder if this could be a feasible application for this diesel electric combo in toyota landcruiser that are often used in underground mines. I feel there would be major potential for this. Charge the battery when in the main ramp and travel on limited areas on battery. Not restricting people to run around for gear in a timely matter could really improve production i feel.

I've been waiting for this! For some reason I first read the title as "Ramcharger" and not RamReCharger". But non the less just as cool lol

glad to see cummins still making the 2.8 i have one in my TJ but you don’t see many videos on them anymore

You know its going to be good when even the crate is well done.

I want to find one of these under the Christmas Tree next year.