*UPDATE:* I found another patent from Mr. Dennis that *exactly* matches the 1988 mechanism I showed in the video, including the unusually rapid auto-return feature: freepatentsonline.com/4788676.pdf

@jro7075

3 жыл бұрын

I have to say I don't know how you do this VERY GOOD DETECTIVE WORK!!!! I am still flabbergasted on how you found this info I loved this so much I seen it 6 times so far I love history and this is good history JRo

@dimis094

3 жыл бұрын

I am very pleased that you feed the audio directly and do not record the speakers as some fancy audiophile channels do...

@OldMusicOnVinyl1

3 жыл бұрын

Thank you for your research Kevin - getting more knowledgeable every day! I've been following you for 11+ years, and have seen your evolution and improvement as a KZreadr - while I'm largely above these cheap turntable mechanisms, it is very interesting and informative to see their evolution and origins.

I find it fascinating that the same man who invented budget record changers invented budget CD changers 20 years later!

@gardenwarrior77

3 жыл бұрын

Yeah that one shocked me too! And my mom's Sony (that was pretty much like the TEAC here), I'm quite sure had both! The 5-CD changer was on the bottom and bulged out of the rest of the system :) Only thing left are the speakers that are surprisingly good (but only when placed well in the room). Also surprisingly they were made in Germany...

@stevefuji1548

Ай бұрын

The Glaser-Steers GS-77 wasn't originally a budget record changer, it was fairly expensive. They made a simpler model GS-400 which didn't have the platter atopping during the change cycle or the automatic speed selector, but it wasn't a budget changer either, it was still more costly than the very popular V-M 1200. General Electric took over Glaser-Steers in 1963 and further simplified the design for use in their portable record players, then came out with a totally new design in 1965.

Tremendous knowledge, dry humor, zero b.s. Vwestlife, you are a treasure.

@SproutyPottedPlant

3 жыл бұрын

We must protect him at all cost!

@theantiquescollector2199

3 жыл бұрын

yes

@ropersonline

3 жыл бұрын

@@shoppinglions9056 Is that your affiliate link?

@ropersonline

3 жыл бұрын

@@shoppinglions9056 Sneaky.

@ropersonline

3 жыл бұрын

@@shoppinglions9056 Oh come on. Don't give me that pretend-ignorance. You knew what you were doing. You were trying to make money on the back of someone else's video, by being the first out the gate with an affiliate link to grab those Amazon affiliate dollars for yourself. And apparently someone with mod powers agrees with me that that's not the done thing, because it seems your affiliate link comment has now been deleted.

Some detective work went into this one.

I had a suitcase Crosley and you know it was never a GREAT player, but it also didn't mess up my records and what it lacked in quality it allowed me the space to dip my feet into the world of vinyl collecting to know if I wanted to make a more worthy investment. These days I have a much more advanced (though still fairly "mid range") setup and I wouldn't have spent that money without exploring the scene with the Crosley first, and I think that's worth it.

I’m here after watching Techmoans video 👍

@robredz

3 жыл бұрын

That cheap and nasty mechanism.and screechy ceramic cartridge. They were around for ages as stated in the video. Audiophiles also avoided them back in those days it seems.

@priddystrains5660

3 жыл бұрын

@@robredz for some reason i have always had a love for the ceramic cartridge (that's what i was brought up with and all i could afford, use to try and go for a Sonitone 9TAHC, they were slightly better) , (i use a magnetic on my main deck now ) but it dose amazes me that you can make them sound pretty good, most of the problems with modern players, why they sound so crap is that these these decks have a rubbish amp in them, a ceramic cartridge needs a good 2M Ohm load to approximate the RIAA equalization or massive attenuation and a phono preamp. but like you said still never 'Audiophiles' quality. Considering most people used to have 'Hi-FI' systems with 'full range' single speakers with no more than a 2W output, a magnetic cartridge would not have made much difference.

@robredz

3 жыл бұрын

@@priddystrains5660 Yes the Sonotone was alsoused in many DJ decks as were rugged and didn't sound too bad, a really good sounding Ceramic was the Decca Deram, but they had a low output voltage for a Ceramic, howeverin times gone by the 2 Watt hifi, the audiophile might be a Leak valbve amp with 10 watts a channel fed into Tannoy dual concentrics that wouldn't take more than 20 watts, but would fill a dancehall big beasts like Tannoy Westminster's.

@priddystrains5660

3 жыл бұрын

@@robredz Agree completely, the Decca Deram was a good ceramic, I had a friend who had one, who would continuously rip into me about my Sonotone's...... On the note of the Tannoy's i once had a set i used when i first started DJing in pubs (they were wood but painted them black to make them look 'professional' ha) , used to use a couple of Garrard SP25 decks, they were built to last back then, when they said 20W they meant 20W not like some speakers or amps today, '100W' is almost like 10W with a good old amp and speakers :). I once brought one of them moden cheap 'suitcase' players about £30, said on the specification 5W RMS per channel (never believed it ) , on taking it apart the IC used in the amp is from the 80s for walkman casset playes no more than 500mW per channel. Always wondered how they get away with saying things like that, then i realised the built in speekers have 5W rms stamped on them :)

@bradygiltz5160

3 жыл бұрын

Techmoan can get a bit toxic..

Here in the UK almost every turntable I encountered during the 70s was a BSR. My very first record player was a Fidelity stereo with a BSR deck just like this. I loved it. It played my records fine and was within the financial reach of my parents. Thank you BSR.

I have vivid memories of playing my parents records on their all-in-one Amstrad stereo back in the late 80s/early 90s that had a plastic turntable/orange cartridge just like these. If its cheap/affordable and works, that's enough for most people.

I know the factories(s) where the units are made. I was there a few times in the last years. They are all in Guangdong province in South China. I live there. The outer metal ring has a fuction. Normally it goes a little bit stronger around the plastic platter. The metal ring keeps the plastic platter in shape to reduce the altitude stroke (hopefully I use the right word, I am a native German...). This is working very well. If you want to know more you can ask me. The man who produces the cheap needles became very rich. He lives in a big villa. The smaller record players (suit case and so on, with the smaller platter) uses lower voltage. I made the suggestion years ago that run with a 5V USB power supply. In before the smaller units uses 9V. It seems they are all run with 5V now.

@marcusborderlands6177

3 жыл бұрын

a german, living in china, speaking english, on a youtube video made by a man in the US. a true Mr Worldwide, lol

@Watcher3223

Жыл бұрын

_"The metal ring keeps the plastic platter in shape to reduce the altitude stroke"_ Sounds kind of like the metal ring serves as reinforcement to help prevent the plastic platter from warping.

@Bigbadwhitecracker

Жыл бұрын

I used to live there and I'm so glad I don't anymore.

“So they made the whole DAMN PLATTER the strobe marks” A sudden burst of passion! Excellent and entertaining video sir! Awesome 😎

@bradygiltz5160

3 жыл бұрын

I always thought that was cool

@Selrisitai

3 жыл бұрын

@@bradygiltz5160 It's not like this video came out 10 years ago, lol!

@mikem3695

Жыл бұрын

Wouldn't the speed change with the added weight of the record making the marks on the platter inaccurate?

So the main reason why record players with this kind of mechanism usually sound so bad is the impedance mismatch, since they don't have a pre-amp designed for a ceramic cartridge.

@vwestlife

3 жыл бұрын

Yup, and that design flaw has a long history, too. My sister had a 1992 Sanyo stereo system and its record player sounded horribly tinny because they didn't properly match the impedance, even back then.

@timweber4318

3 жыл бұрын

@@vwestlife Then why don't just make a full job instead of a half job, match the impedance once in the construction and then produce thousands of players that sound decent for years?

@1979starscream

3 жыл бұрын

@@timweber4318 lazyness and greeding for money maybe?

@ronanjm

3 жыл бұрын

Those aren’t pre amps. The output of a ceramic is near line level, it doesn’t need true preampfification.

@hugoromeyn4582

3 жыл бұрын

But they still add a lot of rumble, wow (very noticable in piano music) and an unacceptable amount of tracking weight. A good turntable applies 1,25 - 1,75 grams of weight. These things do 5 - 7 grams. That they already existed back in the 1980's doesn't mean they don't harm or wear down your records. They did back then, and they still do.

The only thing these cheap turntables ruined was the idea that vinyl sounded better. But it sparked my desire to get a proper setup for a much better sound experience. I say they're a decent intro turntable with the right expectations.

Have to admit, these videos are way more useful for people getting into records than the videos of audiophiles claiming you need to spend $1000 on a cartridge made by nude virgins, and $3000 on a turntable and stereo or you'll never enjoy your records (which is utter rubbish.) The truth is the majority of people would be happy listening with a cheaper turntable and stylus, like the ones shown in this video. And if 6 grams of tracking force bugs you, I'd be willing to bet money that most of the used albums on the market today were generally played on turntables with higher tracking force back in the day, and sound perfectly fine today. A lot of tube records players and old changers tracked at 6+ grams. Vinyl is a lot tougher of a format than some people on the internet think. The blemishes in records are what make them attractive. It's not a format for people wanting crystal clear reproduction that sounds the same every time, digital formats are much better suited at that.

@gfmhd1280

3 жыл бұрын

Yeah. I’ve had the same turntable which tracks at 5.5 grams for a little over a year, and have used it at least once or twice a day. All my records sound fine still.

@manchesterexplorer8519

3 жыл бұрын

Meanwhile the audiophile is preaching about his $2,000 turntable with 8,500 records in the background that he's never listened to.

@turntablethomas2584

3 жыл бұрын

“Nude Virgins”?!!! Bruh I’m laughing like crazy over that comment.😂😂😂😂😂😂🤣🤣🤣🤣🤣🤣 you just made my day

@fedepede04

3 жыл бұрын

I remember back in the 80', we used to put a coint on the pickup lifter to add more weight, And it didn't ruin the record's

@muskiet8687

2 жыл бұрын

Don't forget that you also can't enjoy music if the platter mat isn't made from Unicorn hide, all the cables aren't diamond encrusted, gold plated platinum, and if you didn't insulate the player by placing it on a 2.27356 inches slab of African Blackwood with brass, air suspended feet.

. Thank you again for the subtitles. You have already a very good speech, easy to understand and a pleasing voice. But the subtitles helps me to get those words I'm still not able to understand by just hearing it 👍👍👍👍😀

@trippmoore

3 жыл бұрын

I never heard anyone not from Jersey find the accent pleasing. lol.

This is the best video you've ever made,those 1980's players bring back memories of Sears and K-Mart stereos.

'they realized people were complaining about the bad visibility of the strobe marks.. *so they made the whole damned platter the strobe marks*' one of my favorite quotes of all time

I used to work for BSR (Birmingham Sound Reproducers) making turntables at their factory in East Kilbride, Scotland in the 1970's.

@Dedubya-

3 жыл бұрын

Those were solidly made decks as I recall

Great find! And amazing to see the connection between a single man and millions of cheap record players.

Loved seeing what looks like a Tandy 1000 TX in the background. Had one of those for years, was my first "PC Compatible." Great box.

@vwestlife

3 жыл бұрын

Thanks. I'd love to get a 1000TX, but the one I have now is a 1000SX.

I've said it once and I'll say it again. In a weird way your videos are like therapy. ESPECIALLY in these messed up times of 2020.

@jro7075

3 жыл бұрын

Wow that is VERY TRUE ,after a hard day at work or listening to depressing news I like to watch VWestlife It can take me away from worrying about things I wish I could control but cannot JRo

@life5161

3 жыл бұрын

@@jro7075 Yeah........ Life was GREAT when we had our cassettes and Walkman's. NOW look at us!! 😆 Our phones took over EVERYTHING. Eliminated so much we used to love. CRAZY TIMES. ⏲️

Every time I see that clip of Michael Fremer, I die a little inside lol. Love the video as always, didn't know these mechanisms went back that far. You learn something new every day.

This is the second time I've seen that Michael Fremer clip and it doesn't get any less melodramatic

@sbrazenor2

3 жыл бұрын

He made it seem like a cheap turntable would murder your family & burn your house down, while also stealing your hopes and dreams. 🤣 Sure, if I could listen to his stereo system instead of mine, I would. The problem is, his stereo is worth multiples of my house! He's got Wilson speakers, like $200K in monoblock amps, etc. I think his tone arm and cartridge was something nuts - like $15k when he did a room tour. Those items are a far cry from what most of us can afford, or even aspire to. If you're enjoying your music on a thrift store setup, I'm happy for you. Whatever helps you experience and enjoy the music is all that really matters. Recently I recommended a cheap $30 pair of wireless earbuds on Facebook, because for the money, they sound great and if all you have is those and a phone - you can still have a good listening experience. 😁👍

@nslouka90

3 жыл бұрын

I have yet to see a cheap record player destroy vinyl like it’s peeling a potato

The Tetrad cartridge sounded the best. Those Chuo-Denshi (and clones) cartridges have always had a hollow tone with that scratchy trebly high end like we heard in the video, especially with the all-plastic stylus. I once had a mid-80's Fisher combo that had an all-black variation on the 1984 mechanism but with the Chuo-Denshi cart rather than the Tetrad. I've had several other players over the years from the early 90's through 2010's that use that same cart, and they all sound exactly the same.

I know next to nothing about turntables and thoroughly enjoyed the video. Great work.

My first ever "HiFi" system was an Amstrad branded all in one designed to look like a separates system I got for Christmas in around 1983/1984, it even came built into a cabinet with a glass door and record storage underneath. It had almost exactly the same mechanism as the BSR one but was branded Amstrad rather than BSR. I still have albums I played on that system back then and they still sound fine today on decent turntables because I have always looked after my records.

I want to get a Crosley Cruiser and play Dark Side of the Moon five times in a row to spite Michael Fremer

@kirkmooneyham

3 жыл бұрын

OUTSTANDING!

@michaelallard5324

3 жыл бұрын

Does playing a fresh Boston album six times or more on a Cruiser count? The album is still fine by the way.

@jro7075

3 жыл бұрын

Yes I agree I don't like Michael Fremer he is the audiofool I used to be cause of people like him they don't make great automatic TT's like I remember

@macxpert3588

3 жыл бұрын

Michael Fremer is not completely wrong. Each time you play a record the groove stretches out of shape a little. Back in the 70's and 80's the rule Hi-Fi boffins like me went by was never play a record more than once in 24 hours so the vinyl had time to return to shape. We also went to great lengths to use cartridges that tracked well under 2 grams in order to minimise record wear, with top of the line cartridges from companies such as Empire, Stanton and Sure tracking between 3/4 to 1& 1/4 grams.

@michaelallard5324

3 жыл бұрын

@@macxpert3588 Not everyone can afford those kinds of setups. I can't afford it. I own 2 Technics TTs, both outfitted with AT95E P-mounts. There's no way I can afford to replace those when the time comes. For that reason I don't use those TTs often but the Cruise I own I can afford to use. Diamond styluses are only $8 average for three replacements. And I'm speaking from personal experience...regardless of what others think or believe my Crosley Cruiser is not and has not damaged my records whether old or new. My first TT was an all in one Panasonic, 1980's model, and tracked a bit heavier than my Cruiser. Those records played fine, no damage, all the years I grew up. As long as you keep the vinyl and stylus clean and well maintained there is nothing to worry about.

Interesting and informative with nice close up camera shots showing everything in detail - Well Done Sir !!

My parents had that same Panasonic model. It got a lot of use.

@marionharrisfan2988

3 жыл бұрын

Ignore that reply, I think its a scammer.

more power Vwestlife! we need your very informative audio reviews. i enjoy watching your videos its really very informative. keep it up.

I've been binging your turntable videos for the whole day and I just ran out, so this video couldn't have appeared at a better time!

This is absolutely fascinating. Great video! 😁

Great research! Gives the 'crosleys' a progeny.

I'm no fan of basic tuntables, not one bit. That said, I appreciate that you don't speak ill of anyone who does, unlike so many other channels I've seen out there. Great work as usual!

So after watching a many videos on the subject of cheap turntables, I concluded the following: 1. They don’t ruin you records (the tracking force is well within the normal spec’s.) and 2. If the table is spinning at the correct speed, and the impedance is correctly matched, the TT can be made to sound better with a good set of powered speakers. 3. That you can get into records for a lot less money. Just make sure the above is true, and you are going to have a decent listening experience. Of course you have to go down the rabbit hole of expensive gear if you want to hear all the lovely warm sound the better gear can provide. Great video I learned a lot!

Fantastic and informative, as always. Thank you, vwestlife!

Wow, didn’t expect them to have such a long history! thanks for the video!

BSR is a very unfavorable name here in Berlin. It stands for "Berliner Stadtreinigung". The garbage collection service. I guess it's just a coincidence.

@shuttlethefox6042

3 жыл бұрын

Does the garbage man do that bad of a job in Berlin?

@ChristianKoehler77

3 жыл бұрын

@@shuttlethefox6042 No, they do a good job....

@MotherSoren

3 жыл бұрын

@@ChristianKoehler77 Then why would it be an unfavorable name???

While these cheap turntables won't destroy records, they do cause severe damage after 100 playbacks. It all comes down to physics. A sharp needle vs soft vinyl. More tracking force and less than optimal shape of the tip = more damage over time. Check out the great video by jimboblivesforever. He actually tried it. So no, the "audiophiles" are not wrong, but they often exaggerate the problem.

Fascinating stuff! Very well researched and demonstrated.

What a nice little stroll through time. Thank you.

BSR was a British company, formed as Birmingham Sound Reproducers in 1908. It was responsible from the 1950s onwards for the decks in the iconic British Dansette brand of record players, so BSR decks brought rock and roll to the receptive ears of British teenagers - along with the other main brand Garrard. Inevitably production disappeared to the far east in the 1980s, the remnants eventually being taken over by Emerson. Source - Wikipedia.

The 1984 sounds the best. I was fascinated by this as I had a BSR based record player in my Hitachi all in one as young music buff from the mid to late 70's

Your videos are great... always learn something new.

Your knowledge base is so enviable. Thanks for sharing what you know!

Fascinating! Informative! Educational! This made me take another look with a different perspective at all these cheaply made turntables with a ceramic cartridge. Though I do still think the genuine Chuo Denshi cartridge made in Japan sounds better than the clone from China, the sound quality you were able to get from each of these iterations was very pleasing!

This has been boh fascinating and informative. Thaknks, and Happy Holidays to you.

Incredible knowledge and great presentation yet again. All of your videos are very interesting and so well presented. I've been a follower of your channel for a number of years now. You have one of the most interesting channels on the whole of KZread. Great work again.

Doing what you do best Kevin, I love your TT videos!

New video, awesome content about record players that is a subject that I love+subtitles, I can't ask for more cuz I love it ^^

I saw the Picture on Twitter :). I have a Victroa cruiser but now have a Sharp RP-113 from a Salvation Army thrift store.

@marionharrisfan2988

3 жыл бұрын

Ignore that reply, I think its a scammer.

@cjpwolf2436

3 жыл бұрын

@@marionharrisfan2988 are you new? I was going to get a Vornado and new battery.

I love your turntable/record player videos. Wishing you a very Happy New Year.

I like your chosen variety of music during this discussion. Makes for a much better video on modern record players! Super entertaining my friend!

I have never really bought into the whole “cheap modern needles will destroy your records within a few plays”. My two biggest gripes with these newer players is that the motor speeds often are either be too fast or slow … or there is too much flutter. On the “vintage look” players, what gets me is that makers like Crosley go to such extremes reproducing the cases to look genuinely like a 50-80 year old machine; only to open them up to be met with a black plastic turntable that look like 1990!

It's worth mentioning that your videos are of professional quality with regards to editing, in my opinion!

Hey man, I have been watching your videos for a long time now and I have noticed a big jump in quality. You have always had interesting videos, but it so nice to see how far you've come. Keep it up!

Thanks for shedding light on this. More audio dogma shattered 👍

This was so helpful! I was able to find the speed adjustment “screws” on my Soundesign turntable b/c it was playing the records too slow and it would play 45’s but I cleaned the contacts on the switch and does now! By the way, your advice on turning a meh sapphire into a wow diamond was also super helpful!

Getting all up in the history. You're like the New Jersey Techmoan. 🤣 Michael Fremer has some decent album recommendations, but since his turntable costs more than my car (and the pre-amp); and the amps and speakers more than my house... suffice to say he's a bit out of touch with affordable gear. I prefer the music first audiophile concept. If I can enjoy my music on a piece of equipment, I don't care if it's 'cheap'. Cheap can sound good with the proper pairings and knowing the limitations of your equipment.

@jamesslick4790

3 жыл бұрын

For some people it's just a "name game" and bragging. If something SOUNDS good, It's good. END of story. I have $45 "in the ear" Bluetooth Sonys that SOUND better (with my music, Largely Classic Rock, Blues and Jazz..) than the "Beats by Dre" version (similar price, BTW). But because of the NAME, the "Beats" have more "cred"...WHAH?!? IDC about STATUS, I Care about SOUND.

@jamesslick4790

3 жыл бұрын

@@idkanymore3382 Absolutely correct on Sony's wired cans. (I'm not making this up) I have a pair of wired Sonys that I got I bought at friggin FAMILY DOLLAR for $8 that are every bit a match for my TASCAM TH-03s that were THREE TIMES the price, LOL. -The Sony's are a *bit* better at the low end, And the Tascams are a *bit* better at the high end, But over all Same... For $8!!

@qsxdr7

3 жыл бұрын

You can buy a vastly superior turntable, that has a tonearm counterweight for less than £200 or $200 brand new. Alternatively, you could buy a second hand one for half that amount. Are you really telling me that is unaffordable to the majority of people?

@jamesslick4790

3 жыл бұрын

@@qsxdr7 The OP didn't imply that you should get a Crosley. He said that he put music first, not price. I agree. I have a vintage Dual 510 that I bought in the 80s for about $50. No need to spend $1,000 for a decent turntable.

@sbrazenor2

3 жыл бұрын

@@idkanymore3382 worse than the Beats are Apple's new Airpod Max or whatever the hell they're named. $600 and to put them to sleep in the battery saver mode, you've got to carry that silly 'bra' tote.

I am so greatful for all knowledge you share thank you.😍❤

This video made my day. Thank you.

The 1984 mechanism is trying so hard to look high end.

@HappyBeezerStudios

3 жыл бұрын

It's trying to look 1984-high-end ;)

@stevesstuff1450

3 жыл бұрын

And strangely enough, it still sounds the best out of all those demonstrated! It was using a better cartridge with the Tetrad... cleaner and more accurate bass and treble than the Japanese/Chinese clone had - untill the last example of the 202 version which sounded pretty decent; but not as good as the '84 model.... Even though in 1984 it was very far from 'high end'!! At least it was better 'low end'... ;-)

@dougbrowning82

3 жыл бұрын

BSR actually started making mini players in the late 1960s, only back then, they were auto changers with BSR's own SC 12A ceramic cartridge, They moved to Tetrad in the late 1970s. Radiotvphononut has a few. One was featured in a recent video where he compares it to a modern Crosley.

@stevesstuff1450

3 жыл бұрын

@@dougbrowning82 : BSR continued through the 70s with the BSR SC-12M cartridge in the music-centre all-in-one systems that were made by folks like Ferguson, Thorn, Fidelity, etc, and into the early 1980s... These Ferguson Music centres were my teen age years when I really started getting into music, and I loved them.... Those BSR decks; built to a budget, still performed well, and sounded great! That BSR SC-12M cartridge sound has a place in my heart... and the stereo separation from a decent ceramic cartridge sounds dramatically wider than with a magnetic cartridge!

@Selrisitai

3 жыл бұрын

@@stevesstuff1450 I actually thought the 1984 model sounded the worst, with the treble being more recessed. I thought the 1988 version sounded superior, the 2002 sounded the worst, and the 2020 sounding comparable to the '84 and '88 models.

The thing about these turntable mechanisms is that they have an authentic “vinyl sound”. From the cheapest Crosley or Victrola unit to turntables from quality brands like TEAC, you are going to hear a crisp and crackly reproduction of your records. This is normal and very common, especially in affordable turntables. Some people love the crackles and pops that vinyl offers because it seems more retro, while hardcore audiophiles like Vinyl Eyezzz recommend you buy a $450 Fluance turntable with several $100 amplifiers. Not all of us can afford that. Turntables like a Fluance, Denon, and the most expensive Audio Technica, all come with an even sturdier, higher quality needle than the red plastic ones found on the affordable turntables. People who compare vinyl to digitally remastered music, have remastered the music themselves (For The Record has explained this about his audio setup in a video of his) on their high end pre amps. I love my records and want them to sound good, but I don’t need them to sound THAT good. I currently am happy with my $290 TEAC turntable.

@dougbrowning82

3 жыл бұрын

The Fluance is probably made by the same company that makes the Denon and Teac turntables. The Fluance brand has been for years associated with home theater speakers. It's owned by a Niagara Falls based marketing company called Circus World Displays, who also sells under the Citizen, Electrohome, First Alert, and other brands. And, BTW, they do sell those plastic Chinese players, as Citizen and Electrohome.

@amberisvibin

3 жыл бұрын

I believe I have a nearly identical Onkyo turntable, looking online. I'm very happy with it.

@katyushavarenik7877

3 жыл бұрын

Im not sure if ill ever buy a new turntable, ive owned a Yamaha P-700, Pioneer PL-450, and now a BSR 100-SX. Upgraded the BSR with a Sumiko Pearl and it sounds wonderful.

@OldMusicOnVinyl1

3 жыл бұрын

@@dougbrowning82 Yahorng Electric is the OEM that makes current Fluance, Teac and Akai turntables. Denon (except for the VL12 Prime) and most Audio Technica turntables are made by Hanpin Electron.

@dougbrowning82

3 жыл бұрын

@@OldMusicOnVinyl1 Yahorg Electric is based in Taiwan. They make turntables, mixers, blenders, choppers, coffee makers, deep fryers, food processors, and juice extractors. Hanpin Electron, also from Taiwan, makes audio equipment, musical instruments, and business machines.

Nice work Columbo! Very informative! Excellent video.

Awesome video, thanks so much for doing the research!!!

Luckily i've got an LP60X for christmas 😅

@supersamsquared8055

3 жыл бұрын

Nice!

@sbrazenor2

3 жыл бұрын

I had an LP60, but I could never really get the timing right on it, so I grabbed an LP120USB (or whatever the model is) with the quartz locked direct drive. It makes a world of difference, but it is pricey in comparison.

@thenow5559

3 жыл бұрын

Its a great tt I bought 1 in 2011 and after a year i thought more expensive tt's are better, well, i can tell u from my experince, after buying $400 Dennon dp 300f and now $ 1.3k music hall 7.3. Sound difference is not that big ( if any).

@5roundsrapid263

3 жыл бұрын

I own the Sony version of it, the PS-LX250H. I had one for almost 20 years, and it finally broke. I found another one used for $40. Very good unit for the money.

@trippmoore

3 жыл бұрын

just don't post that on r/turntables

A turn table design that is both used and scorned around the world that was designed by a guy in OKC? Very interesting indeed!

@marionharrisfan2988

3 жыл бұрын

Ignore that reply, I think its a scammer.

Very interesting video, thank you! Lot of interesting history 😊

I didn't know you were still making vinyl videos anymore! What an incredible early new years present!

If you want to verify the history of this mechanism, a great place to look is the Radio Shack catalogs. They seem to have been using BSR mechanisms on their budget turntables all along, and you can see when they switch from the older style BSR mechanism (the 70s style record changers with the start/stop lever in the corner, usually with a silver bulls-eye pattern on top) to the newer cost reduced version you had from 1984. There was also an in-between version for awhile. The 1982 catalog exclusively has the older 70s style BSR design for budget models, and more bespoke designs up the range. No hint of the newer mech yet. The 1983 catalog is slightly more interesting. The cheaper all-in-one tables (Clarinete 104, Clarinete 90, etc) still use the 70s BSR mech, same for the very cheapest standalone LAB-59, but the slightly more expensive LAB-75 and LAB-77 use a changer that looks like it's an in-between of the older design and the 1984 design. It borrows some elements, like the flusher style off/play switch from the older BSR, but has a minimalist footprint more similar to the newer model. It uses more fake chrome than the 1984 design but less than the older units. I think this might be a missing link in crappy turntable evolution. 1984 soldiers on with the same lineup on the lower end, so nothing of note here. 1985 replaces the LAB-75 and 77 with the LAB-79 and 85 changers. These look exactly like your 1984 style BSR, but configured to be a changer. They also included a platter mat. I did read somewhere that this was a BSR table rebadged as a Realistic product, so it seems that the 1984 BSR variant was also available as a changer. The 70s style BSR table was finally bumped off of the standalone LAB tables, making the new BSR the new bottom end, but it remained on some of the all-in-one Clarinete tables. Notably, the very cheapest Clarinete, the 116, has your non-changer 1984 BSR turntable mech at last. Given that they probably started manufacturing these a little before release, this date lines up, and these machines most likely first hit the market in '85. 1986 was mostly the same. By this point only one model was left with the 70s style BSR mech, the Clarinete-115. Some of the others like the 114 had more cut back designs reminiscent of the older model but without a changer. The slimmer profile, cheaper Clarinetes had the newer '84 non-changer variant. 1987: Realistic still marketed the changer style of the '84 variant, consolidated to just one table, the LAB-89, and somehow the 70s style BSR limped on in the highest end Clarinete. (I had no idea changers were still around this far into the 80s.) 1988: The LAB-89 changer is till there. The 70s style BSR is finally killed off in the Clarinete series, and it looks like they actually regressed to an even cheaper looking table for a bit. Notably, this time it recognizably has a red Chuo Denchi cartridge. 1989: That plucky LAB-89 changer is still holding on, and I must know if it survived into the 90s. The Clarinete series is reduced to one lonely model, the 122, which has the "even cheaper than BSR" mechanism with Chuo Denchi cart. 1990: The LAB-89 makes it one more year! Changers officially made it to the 90s, though I wonder how many actually sold. Maybe they had so much stock left over that they kept them in the catalog until they finally sold out, who knows. The Clarinete holds on with one last model, the 124, which has a mech that looks much closer to the 1988 style you have, but still slightly different; the table and tonearm are separated. Finally, in 1991 Radio Shack stops marketing changers for good. Only a handful of sad looking black plastic turntables remain. By 1993 there's only two left and they're getting shoved farther back in the catalog with tinier pics. It's down to a single lonely table in 1997 until the Realistic line was finally killed off, but they kept marketing budget tables even after this under the RCA badge. But at this point we're well into the age of Crosley tables.

@freespirit1975

8 ай бұрын

I haven't had a turntable since the 80s even though I have a LOT of vinyl albums from the 70s in varying states of wear. When a newlywed in 92, my bride, bless her heart, bought me a Radio Shack turntable for Christmas. With skepticism, I put an album on and put the stylus in the track. The tracking weight must have been about a half a pound. It was torture letting it even go half way through the first song of my precious album, and that was it. It's still sitting in the storage room. One day maybe, I'll buy a good turntable, but honestly I don't see it. I listen to CDs exclusively and most of my vinyl that I would still listen to has been replaced with a CD version.

looked over at the used crosley I bought a while back, and yup, it has that exact mechanism.

Thank you for this informative video, and the history of cheap plastic turntables.

@BradOlsonBemidji

3 жыл бұрын

There have always been cheap turntables with heavy tracking cartridges and tonearms

Just played a record I got Xmas 1975 and it still sounds great. So much for all the hammer it took on the BSR decks back in the day 🤣 Didn't know Pioneer used a carousel cd player, thought they stuck to their load upside down cartridge mech. Excellent video cheers 🍻🎄

Loved this video. Good research. I learned a lot. Frank

It's like with the recent cassette mechanisms that are all the same today.

@kirkmooneyham

3 жыл бұрын

Those are based on a unit by Tanashin, a Japanese company. Though a simple design, it can work well when done right. Unfortunately, there are a LOT of knockoffs of them, and they are most certainly NOT done right.

@UrOpinionsSucc

3 жыл бұрын

Tanashin has been around since the 80's though.

@michaelturner4457

3 жыл бұрын

But at least turntable and record player manufacturers aren't limited to the one cheap mechanism, unlike with new cassettes now.

@UrOpinionsSucc

3 жыл бұрын

@@michaelturner4457 unless you have vintage high quality decks...which in my case i have a few.

My brother got a new turntable for Christmas and he gave me his old one (both with this mechanism). The one I have is a suitcase style with the odd design of stereo speakers firing out the left side and Philco branded. It needed the volume control cleaned, but works.

My grandparents Phillips stereo system, which they bought brand new in 1988 uses the second design, and they played their records nearly every day until they died about 2 years ago. Can confirm it doesn't destroy the records.

Wow! Great history lesson, man! Crazy to think this record player mechanism has been around for over 30 years.

@haroldalexis4200

3 жыл бұрын

I got so much from viewing this very interesting.

I've come across a few cheap, all-in-one stereos from the 90s that feature these turntable mechanisms. I'm surprised I didn't notice their resemblance to cheap contemporary units until you pointed them out!

Very interesting video. I've got here in the UK a Philips midi system from 1988 with this type of turntable. I was really easy to track down a replacement diamond stylus for it, and it sounds great.

Awesome video as always.

Great video :-) That was a fascinating dive into the history of these cheaper turntables... I was quite surprised to see that they originated with BSR though! Nice one! :-)

It all adds up now. It also explains the later Stack-O-Matic record changers of the mid-2000s. In addition to low-cost stereo systems under their own brand. Capetronic was also an OEM for other companies, including the famous Brother Domino II stereo (as well as my Brother Impact 33 which I sold a while ago). It makes sense that they would acquire BSR's patents for their record changers and record players. Before that acquisition, they tended to use BSR record changers (and when Glenburn was around, they used Glenburn). They also made the chassis for low-cost tabletop and freestanding console stereos. Makes me wonder if they changed their name during the 2000s, since I can't find much info on Capetronic nowadays.

I'd love to see a test of a brand new, high quality pressing of some record played on audiophile grade equipment, with a blindfolded audiophile as the listener, and then play a copy of the same record that has been played 100 times, normally (no intentional abuse or misuse) on a Crosley, and see if they could actually, legitimately tell that there was any difference. The arguments on here about "6 grams will absolutely ruin a record" and "i looked at a track on a record that had been played to death on a heavy radio station cartridge" etc dont mean a single thing if you cant discerne a loss in sound quality without first doing a math equation and reading 3 years worth of r/vinyl posts. And don't even reply saying I DID THIS ITS REAL because I know none of you have ever done it. Not defending Crosleys, they're crap. I'd never own one. But I also play my records occasionally on old battery powered portable record players, and when they're back at home on my real turntable I'd never know they were now "completely destroyed and unplayable" or whatever. Just enjoy your music and hobby in whatever way is accessible to you, and stop being scared that your one of a trillion copies of your hit fleetwood mac record or whatever priceless artifact of 1976 is...still fine for all intents and purposes. Great video as usual.

@buttguy

3 жыл бұрын

I will make an exception for styrene 45s though. Those things get groove damage if you look at them funny.

@xx-mreba-xx4051

3 жыл бұрын

@@buttguy as someone who is about to replace one for the 3rd time I concur

@loquendocapoxd

2 жыл бұрын

I will tell you… I started out with a crosley that was gifted to my mom. I bought some records, played them countless times. Then upgraded to a vintage elac idler wheel turntable, played them countless times again. Finally upgraded to a vintage denon direct drive automatic. The records most played on the crosley sound the most “used”. Yes I still enjoy them and spin them from time to time. The elac did also degrade them (because of non-adjustable cartridge position and anti-skate) but not as much as the crosley. Of course music is music and will always be enjoyable, but to me there is no doubt that records, especially ones with “quiet” passages will suffer to some degree. I will not deny that my current turntable still damages them, such is the way of the medium, and our hearing is “subjective” enough anyway. But I will argue that records that I have played restlessly on the elac sound much worse than the ones I bought when I already had the denon, and the ones I have since the crosley have even MORE playback noise. I believe someone must not overthink such joyful aspects of life like music, in order to get full enjoyment, but I’d be lying if I didn’t say my older “well worn” records sound noticeable worse. Which is not a terrible thing per se, but since records are already very expensive, spending 4-5x the retail price of a new record on a decent used deck will make them enjoyable for longer.

@ghdhfgh6125

11 ай бұрын

This

Amazing history information.

Got an Ion turntable with that mechanism and adding a banpa cartridge (per your video) really classes up the sound. I also do the old-school trick of glueing a few coins off the back to lower the tracking force. The only thing I can't solve is needle talk. Some of my cheapies are so noisy I can listen to an album in a quiet room without the amp plugged in.

Who would have thought that cheap turntables and entry level cassette decks would have such interesting histories. It should come as no surprise that my first stereo (Soundesign) had pretty much the same mechanism. My first record player was a Fisher Price, I wonder how it compared...

Excellent video!😊

Excellent research thank you!

Vinyl records weren't designed to be used a million times, but surely these 6+ gram tracking force players won't do it any good. The JVC L-E5 I use myself has a 1.3 gram tracking force. It does matter. Everything else, like plastic parts VS metal parts, stylus or the circuitry has no effect on the record. The stylus will damage the groove no matter what. You want a unlimited play medium, go with a CD, or better, just data off a memory storage device which can be copied forever. Vinyl wasn't reinvented because it's cheap, better sounding or somehow superior. It's fun and is supposed to be fun. So if someone has fun with a Crosley, then let them have fun. You want audio quality, you don't get vinyl records, but FLAC files on a Class A amplifier.

@snewton47

3 жыл бұрын

It is fun, that's pretty much why I play records, that and I'm old so I have several thousand from before the dawn of time.

@cclip46

3 жыл бұрын

Flac is a great audio file. I have hundreds (or thousands?) of vinyl downloads that I got from this Russian site called RU tracker. The notes on these files are pretty amazing. The people played their vinyl on VPI scoutmaster turntables ( a cheap scoutmaster is about 15k) FLAC rules the audio roost. Toodles👋

Capetronic AFAIK was at least at one point a division of BSR. I know they made more than turntables and did contract manufacturing for lots of companies.

@vwestlife

3 жыл бұрын

Yes, I found some references to Capetronic being owned by BSR.

@MatthewBrannigan

3 жыл бұрын

I remember they also had a brand called ADC, who specialized in graphic equalizers and phono cartridges - they were more high-end though, they sold the crap under the BSR name and the better stuff under ADC.

@MrDuncl

3 жыл бұрын

If anyone is wondering what happened to BSR they changed their name to ASTEC and manufactured computer parts. www.cbronline.com/news/astec_bsr_reckons_rationalisation_will_feed_through_in_1991/ Just about every British Designed home computer made in the 1980s had an Astec RF modulator. IN BBC computers they made the PSU as well. I recall reading at the time that BSR was the company behind the name.

@jro7075

3 жыл бұрын

It's a shame they do not make these BSR"a anymore I grew up with these TT's I did not appreciate them at the time I went by what audiophiles said that these automatics were sub par. older I have gotten that I sometimes think of my young days and started watching videos on how to repair these TT's if you take a good look at them the way they function is almost like watching a fine time piece especially the earlier Bar's from early 60'&70's the platter was metal and platter had rubber on top , and watching how they go down onto record precisely is fascinating I always loved these automatic TT's just did not know it till I fixed 2 of them from early 70's these were built like tanks the last one I fixed had a magnetic cart and an adjustable counter weight which I did not know they made them till I bought this one. I think they do a fairly good job at placing stylus onto record with out missing been using manuals for several years getting tired of trying to carefully place needle down and getting up just as record finishes ,I do not see what damage they can do to a record JRo

@dougbrowning82

3 жыл бұрын

@@jro7075 BSR started making record changers in 1951. They had the Monarch series, which included the Magidisk intermix automatic record size indexing system. In the late 1960s, they switched to the McDonald series, with manual size selection, but gaining auto repeat play. Monarch was the name of the street where the factory was located in Birmingham, and McDonald was the founder's name. Their biggest competitor at the time was Swindon based Gerrard, which was originally a clock maker. BSR was also in the home automation business. making remote controlled outlets and light switches that could be controlled from a central console. Hackers figured out how to produce the control codes on an Apple II computer, and home automation was born. The Dansette record players, produced in London, were designed around BSR Monarch changers.

Hello to Westlife this is by far an excellent video I've already seen it 3 times including now love history on things like this , I can see how these cheap plastic TT's came to be. ,I can see how easy it will be to remember his name mine being James also it's a shame cause of the changing audio format during the 80's they had to cheapen the record player , I will say this was the best video on the history of these kinds of record players thank you for this Looking forward to your next video ,have. Happy and safe New Year JRo and I almost forgot the last song you play as you end the video is a song from my child hood it originally was from a Spanish group it was a very popular song and a dance song a meringue if I remember my father had the album it was a Dominiquen group , that song brought me back home to when my father played these songs especially during the Holidays THANK YOU !!!! JRo

Interesting video and well researched. Thank you 👍

So the Crosley Cruiser is indeed the modern equivalent of a cheapo BSR changer. Even has its DNA!

All roads lead back to BSR.

@cjc363636

3 жыл бұрын

How true (a former teenage owner of a 1981 Radio Shack BSR system!)

@Musicradio77Network

3 жыл бұрын

It was BSR, the one that made those cheap record changers. I had my Fisher turntable that had a cheap BSR changer until I replaced it with my Magnavox Collaro Micromatic which was a later production from 1967 that I pulled out of a portable stereo record player since it was in poor shape, and it still works after cleaning and lubricating. BSR was the brand for cheap record changers that were known for being stuck or frozen due to old grease, and it needs a lot of cleaning. The Magnavox Collaro changers are way better.

@xaenon

3 жыл бұрын

@@Musicradio77Network It fits, then, that Crosley was able to get a BSR designed record changer in their Stack-o-Matic record players a few years ago. The changer they used was virtually an exact duplicate of the 'classic' BSR design of the 1970s; parts were even interchangeable. The only difference was they altered the drive a bit; the Stacko used a DC motor and belt drive, where the older changers were idler drive with AC motors.

@Musicradio77Network

3 жыл бұрын

@@xaenon The GE Wildcat record also had a changer that it wasn’t BSR or Glaser Steers, it was the GE name. They did the same for “Swingmate” as well and the tonearm that has a GE logo emblem on top. That was made in the 1970’s when GE started to make record players that are cheap at the time.

@MrDuncl

3 жыл бұрын

@@Musicradio77Network I almost misread that as Fisher Price :-) Here in the UK BSR supplied the deck for the Fidelity HF42, which from about 1975 to it being discontinued was the cheapest new record player on the market kzread.info/dash/bejne/g4Op0KOaipu-fs4.html In real terms it was still a lot more than a Crosley though. £14 in 1976 which adjusted for inflation was £101 in 2019.

It's ludicrous that they even make turntables for tens of thousands of dollars. A Technics for $20K, a Clearaudio Master Innovation for $28K...the Vyger Indian Signature IV is priced at $65,000 USD. I haven't bought an album since the 80s but I remember the hardest part was getting one that wasn't outright warped, or cupped, or had a wave in it. They ALL had something wrong with them and you had to pick your battles with the record store, which led me to keeping quite a few records with a slight wave in them. Then, no matter how clean you kept them with that little felt disc cleaner and fluid, you'd get snaps, crackle and pops, just from household dust (microscopic rocks) floating around and landing in the grooves. When CDs came out, though the sound was as clear as a bell, I too somehow perceived the difference in sound. I told someone that, I just don't enjoy my music like I used to, what could it be? I guess I got over that, but music still doesn't do it for me like it used to when I was young and listened to albums, all other things being equal.

thanks for this great informational vid. James had a nice one storey house in the suburbs. I had a GE turntable of this variation..

The turntable looks like the hull of the Enterprise

@marionharrisfan2988

3 жыл бұрын

Ignore that reply, I think its a scammer.

BSR produced changers used to be everywhere in the 70's - and they were never well regarded. Here we have BSR's non-changer legacy: still everywhere and still not well regarded! Thanks for this; a refreshing change from the mostly mindless Crosley/Victrola/etc reviews found on KZread.

thanks for the great video !

Fantastic video.