Spent almost an hour trying to figure out how to put the throttle cables back on, couldn’t find a video showing how on this bike so I finally just clicked on this video and saw how you put it back on, this was the most stressful thing I’ve ever had to do on a damn dirt bike 🤦‍♂️😂 thanks brotha🙏

@leeirwindrums2765

2 жыл бұрын

I’ve rebuilt top ends faster than replacing the stupid cables on this thing….actually still don’t have the cables on it just won’t F’n go on

Still my favorite channel can’t wait to see these bikes rip during the spring and summer

@DadsDomain

4 жыл бұрын

Thanks, we’re getting more snow today but the kids are ready for it to be gone!

@regianeduarte2000

4 жыл бұрын

For the spring since I’m growing so fast my parents are getting me a KX100

@carsonjohnson1845

3 жыл бұрын

Dirtdeval 125 nice I’m getting a CRF150R

You can get big power gains from just an exhaust and ecu flash on these things. They run about 5.5 hp stock and CJR said my crf110 should be pushing 8hp and rev way further out from just my intake, exhaust and ecu. Only invested about $5-600 total. Apparently you can do a 133 big bore with all this and make upwards of 12.5 hp

@DadsDomain

3 жыл бұрын

OH that sounds like fun!

I just tried to install the BBR extended cables kit with the throttle tube that comes with it and nothing fits and all of the cables are sticking. Any suggestions for good extended cables and a full size throttle tube that will actually fit as advertised?

Did you just move the bars up? They look like they have a lot more room? My son is 12 I don’t want bars yet? So can I just move them forward a little and put full size grips??

👏

Just changed the grips on my 110

@TaylorRobinson93

4 жыл бұрын

Hey dude did you do the dremmel thing like in this vid or did you find an aftermarket part specifically for it?

@nickduarte1778

4 жыл бұрын

Taylor Robinson I know that guy I saw him do it he didn’t use a dremmel it was 2013 crf110

I bought the pro taper pit bike bars high rise and I bought the same grips you did and I have a longer throttle tube that came with the bars and mine is doing the same thing it won't return to its normal position when I twist the throttle. So do you think that can be the same issue and your saying that I need to loosen the cables?

@DadsDomain

3 жыл бұрын

Thats what I would look for first is a way to loosen the cables, they can bind pretty easily. Sometimes look to see if you can route them differently as well with less twists if there are any

@lukefish7562

3 жыл бұрын

Mine just came in! What would be best bars for 6’2” adult? Thanks a lot! 😀

You didn’t need to cut the tube, take off the nut on the throttle cable to give it more slack then trim the plastic guide to allow more cable... now it’s a 1/4 turn throttle

I have a pre EFI crf110f and I can’t seem to find anywhere with a tube for a full size grip? Can anyone point me in the right direction please!?

@tyahbau

3 жыл бұрын

Im having same problem...

Cool!! I found out i did it wrong 😑

@DadsDomain

3 жыл бұрын

I've since heard you can order the factory 125 grip, if this ever fails i'll try that

Does your throttle tube overhang a little bit? Should i cut the end to make it flush with bars or no

@DadsDomain

Жыл бұрын

I think it might a little but it’s been fine. I would leave it

A mi no me cuadran trato de ponerlo para apretarlo y no cuadran

Crf125f throttle tube will swap straight in for full size grips with no mods 👍

@DadsDomain

4 жыл бұрын

Anyone remember that NBC chime that went with “The more you know” Thanks man! Lots of shops are selling modified tubes online. Never thought to look that way since the 125 is EFI now too

@reilly50s

4 жыл бұрын

Also can use the 125 throttle cable for taller handle bars to keep the cable routed in the stock position

@DadsDomain

4 жыл бұрын

We will he doing that eventually for sure.

@TaylorRobinson93

4 жыл бұрын

Dads Domain Already tried what he said, It will work, but you will have to run OEM Honda CRF125 grips because the CRF125F throttle tube will never comply with aftermarket grips. So technically NO it doesnt work.

@reilly50s

4 жыл бұрын

Taylor Robinson are u serious lol the 125 grip just needs to be cut off then you file down the little lip and any grip will fit, way less modifications then this video