Dude, you're awesome. Thanks for providing the links to the spreadsheets

Thanks my man! I'm just studying up on Forscan and one of the things I need to do when my ODB2 adapter gets here is change my tire size to the exact tire you did in this video. I've had these 33" tires on my 2015 F150 for 30,000 miles already so it will be nice to get the speedometer finally calibrated. Plus the check engine light came on after about 89,000 miles for the first time. I appreciate your video?

Worked like a charm on my 2020 f150 35x12.50r20. Used the ridge grappler size and it was dead on. Thx!

Thank you for a thorough and most informative video!

@TruckStuff1

3 жыл бұрын

Glad it was helpful!

Thank you sir! this has my speedometer spot on! great video

@TruckStuff1

2 жыл бұрын

You're welcome!

Great video, thank you!

Just set my 305/55r20 code "0A02" and worked flawlessly!!! Thank you !!!

@TruckStuff1

3 жыл бұрын

Awesome!

Very helpful. Thanks.

Just wanted to add I have a 2020 XLT With 35” Toyo open country At3 6.5” lift. I set my tire diameter to 2681 and it was dead on. 2355 was what was set originally. I started with the diameter google suggests and since every tire is different I had to play around with it. I dropped it from 2791 to 2681 in increments of 20 mm till it matched the gps speed on my phone and radar detector.

@TruckStuff1

2 жыл бұрын

Glad to hear you got it dialed in! The process works!

In my 2020 f350 it doesn’t have the relearn at the top of screen so I can’t reset the wrench. Any ideas?

Would you possibly know if forscan would be able to fix speedometer on a 2001 ford Escape.

If I have the same 35x12.5 but a 22 wheel instead of a 20 will it make a difference?

Any idea how this might be done for older (early 2000's) Ford trucks? I have a 2003 and Forscan only reports one parameter in the as-built module reading. Also, tire size in a 2003 is not in the BCM, but rather the PCM.

amazing, thank you!

@TruckStuff1

3 жыл бұрын

You're welcome! If you can, leave a like. It really helps me!

I need to change the low miles from a new IC to the right ones in the vehicle which are a little higher I do not want to lower them but to make them higher. How do I do it on a f150 2015 xl

I have a 2011 F-150 XL 2wd and it has tires that are roughly 1" taller than stock. Original size was 235/75r17 now has 265/70r17. Truck was fine but after I had the transmission reprogram recall my speedometer reads 10mph fast. At and indicated 70 mph I'm only going 60. The dealer said it's because of the tires but the tire shop said a taller tire will make the speedo slow not fast. Has anyone else had issues after this recall?

Thanks for this video! Question - what sync version did you select after starting the software the first time? I have a 2015 f150 lariat - would that be version 2 or 3? I heard that all 2015+ should select v3 but i couldnt verify. Thanks for the help!

@dan9697

5 жыл бұрын

@@TruckStuff1 this is the version i have so im assuming i should select v2 on forscan setup? goo.gl/images/Q1TLyX thanks!

i have a 17 10 speed ecoboost and after i tried the relearn the wrench didn’t go away i don’t know what to do now

Any way I can do this on my 2011 f150?

I did everything explained in the video and could not get the DTC to clear. I had to revert back to the prior settings. It would be nice when you post the video to please answer all the questions that are posted afterwards. I would like to know how to make this work for my 2017.

Hi sr,I installed raptor tires 315/70/17 in my F-150,What numbers do I need to put in forscan for a correct calibration,

Hello there, Im planing to go from 275/55R20 to 33x12.5r20. If I follow your video and make all the adjustments in forscan I do not have to re gear or tune my truck correct?

Will this work on my ‘18?

Is there a tire size spreadsheet for the 2011MY?

Anyone know if this is the same for Ford 6.0? (250/350). Spreadsheet seems to indicate at least mustang is values are correct by calculation.

@cjchico

4 жыл бұрын

woud like to know the same

hey dude.. nice video.. very infomative... do you know if there is a way to have different size tires on the front than those on the rear. I tried it, and it threw all kinds of warning lights and codes (hill assist, back up assist, traction, TPMS and no e-brake).... all these codes from just putting wheels off my 2006 F150 (20x9 on 275/45r20 and 22x10 on 305/45r22 tires)... we are dealing with a 2018 F150 XLT (5.0 w/10 speed)..... any help would greatly be appreciated... thanks... I hope you are having a great 6th of July...

@TruckStuff1

5 жыл бұрын

I'm not sure, I've never heard of anyone doing that on these trucks. other than disabling sensors, I don't think there is a way to program that in.

I want to try to add a tpms device to my air ride suspension system but the default pressure threshold seems to apply to two tires at a time. Any way to individually set a tpms threshold? And, any way to add two tpms devices to my ‘16 f150 Lariat? Good video.

@TruckStuff1

3 жыл бұрын

I'm not sure about that one.

What is the link to the 2 tire size calculators

Thanks for this, im new to forescan, well to doing it myself. I imagine it makes no difference if the tire size is with a level, lift, or stock suspension? Will it still work the same as far as speedo/odometer/gas indicators being calibrated?

@TruckStuff1

3 жыл бұрын

Correct. It just changes the tire speed ratio.

@forcemajeur.5138

3 жыл бұрын

@@TruckStuff1 thanks brother.

Hi dear Please Bdycm is not showing while i am trying the process do you know how to fix it u have mustang 2014

How to apply on KM models?

Hey, So to "run" the module initiation/relearn vehicle data I assume after you select it, you hit the Play button on lower left? Everyone always says run it but never explain how to perform this.

@ryanzuspan8087

Жыл бұрын

Yep

Anyone knows something similar for Ford Fiesta mk8 ? Cheers

I just did this two days ago and I got that wrench and I panicked and restored the code lol thanks for the info man. I have a 2019. But do I need to undo this if I have the truck serviced since I am under warranty.

@TruckStuff1

3 жыл бұрын

If you got an error code you did something wrong. Try it again and read the service codes.

@badillaboy

3 жыл бұрын

Truck Stuff going to try the relearn since it’s the wrench on the dash.

Does this also work for 18/19 model year F150s?

@TruckStuff1

5 жыл бұрын

As far as I know, yes.

Will that calculator work on a ranger i have a 2000 and i need to fix my speedometer

@jok3yjesu339

5 жыл бұрын

@@TruckStuff1 I seen a thing where a guy with a 2000 ranger adjusted his speedo with tire size with forscan because 1998-2000 2wd rangers the speed signal goes through the gem then to everything that needs it, I bought a module I'm gonna firgue it out whenever I get it

@jok3yjesu339

5 жыл бұрын

@@TruckStuff1 il firgue it out I hope so at least lol my speedo is off by at least 10 mph

Hi, i still. Have wrench after doing the pcm relearn

@bkay042

5 жыл бұрын

same

@DodgerthaRoger

5 жыл бұрын

Can you do a TCM relearn?

@bkay042

5 жыл бұрын

@@DodgerthaRoger yea that fixed mine

@TylerBrown331

4 жыл бұрын

@@bkay042 TCM relearn worked for me as well. Thank you!

So where can I find the spreadsheet of tire size info? Link please.

@TruckStuff1

2 жыл бұрын

Link in the description

I still have the wrench on the dash after al the steps

@andrewa4757

5 жыл бұрын

Same here. Did you figure it out?

Just got new wheels and tires for my 18 f150. 305/55R20. I changed the tire size in forscan and I got the yellow wrench on the cluster? What do I do to get rid of it?

@TruckStuff1

3 жыл бұрын

Reset to the factory settings. The orange wrench is a powertrain fault.

@cenzo9434

3 жыл бұрын

@@TruckStuff1 how do I reset? Do I pull the negative terminal on the battery for about 30min?

@TruckStuff1

3 жыл бұрын

No you need to reverse all of the changes you made in Forscan. You can also use Forscan go pull DTC codes. Before you make changes in Forscan always make a backup of the settings do you have something to go back to if it messes up

@cenzo9434

3 жыл бұрын

@@TruckStuff1 I did the pcm relearn through forscan...it appeared to work as the wrench no longer is there....will it pop up again on a later date? Or did I actually correct the issue?

@TruckStuff1

3 жыл бұрын

If it's gone it's probably fixed.

Anybody successfully calculate and program 37" tires???

I cant get my wrench light to go away no matter what i do. can someone please help? i have done the relearn multi times and no luck,

@TruckStuff1

2 жыл бұрын

What DTC codes do you have

@danielbunge8550

2 жыл бұрын

@@TruckStuff1 I didn't do both relearns. FYI, there is a PCM & a TCM relearn. after i did both of them the wrench has gone away.

Who the eff would name it ForScan.

@TruckStuff1

3 жыл бұрын

For being short for Ford

@pocketpoolboy

2 жыл бұрын

Russians...