I love how pretty much whole dash is 7 mm. Makes it so easy to work on

Just programmed and installed in less than 30mins. So easy thanks to you, the XL Peasant Saga upgrade continues…. Sync 1-->3 + wiring tailgate camera running under through the truck into the radio is next. That’s definitely gonna be interesting…. wish me luck. Love this channel btw

@JackofAllMasterofNone

Жыл бұрын

Awesome. 👍

Just upgraded my 2018 xl to the lariat steering wheel and cluster! Your vid was a huge help

@JackofAllMasterofNone

9 ай бұрын

Awesome. Enjoy!!!

This is a great place to have accurate and precise information, thanks for that. The only question I have is, once the original data is downloaded and flashed back to the new cluster, is the VIN # carry over to the new cluster?

@JackofAllMasterofNone

6 ай бұрын

Yes

@g-bodymore3368

6 ай бұрын

Thanks for the fast response.@@JackofAllMasterofNone

@g-bodymore3368

5 ай бұрын

I'm curious about something you did with FORScan after turning on the cluster for the first time. You hit "No" on the FORScan screen message that asked you to load your saved profile (VIN). Once all of the corrections are completed in the new cluster, is FORScan creating a new profile matching that new cluster?, and after that, do you consequently answer "Yes" confirming your truck profile on futures interventions with FORScan?

@JackofAllMasterofNone

5 ай бұрын

You can hit yes every time if you want. If you hit no It just doesn't scan for new modules each time so if you hit no it assumes you have the same setup. It still looks for dtcs though.

@g-bodymore3368

5 ай бұрын

Thank you so much@@JackofAllMasterofNone

Prefect video. Saved me a bunch of headaches I didnt think of on my 2021. Thanks !!

About to do this TODAY! WISH ME LUCK JoAT!

u mentioned something about someone who can program the mileage and all the data, where do i find that

Love the video. I have a 2018 so will I need to do the relearn setting. Also do you have to put in your drive and idle hours.

I have a 2020 F250 XL 6.2L and I’ve found lots of these instrument clusters they are either diesel or 6.7L. Would these work on my truck?

iam trying to do this in my 2019 f250 and forescan is saying "service procedure has been interrupted" i also tried your way with saving original cluster and uploading it that way says not enough value blocks. do you have any insight a to why this is happening?

@JackofAllMasterofNone

16 күн бұрын

It sounds to me like possibly the cluster you have is not the correct part. But that is just a guess

I just got a 2015 platinum It does have navigation on it

I troed upgrading my 2inch to a 4inch, and i get an error when i try and upload the as built data into the new cluster. Any ideas?

@JackofAllMasterofNone

11 күн бұрын

Are you sure you have the right part? It had to be from the same year F150

Can you please share part number.

I just put an 8 inch in my xlt, and when I try to write the IPC as built that I just saved, forscan won't open it. Says corrupted or something.

@JackofAllMasterofNone

2 жыл бұрын

I'm not sure what is going on. Maybe the file is corrupt. You have a couple of options potentially. You could temporarily reconnect the old IPC again and reread and save the file. Or forscan has a built-in "as built" look up function now on most vehicles. You could search via your vin # and get the IPC as built for your truck and flash that to the new cluster.

I just did the exact swap. Follow you step by step thank you very much man huge help! Did you by chance figure out how to get the miles to empty above the fuel gauge? Any help would be great. Thanks again!!

@JackofAllMasterofNone

5 ай бұрын

It's not hard it's just a simple setting in forscan that I have not bothered to do. If you search Google you will find the answer pretty quickly.

Couldn't you get a cluster with a lower mileage, install it and not update it to the actual higher mileage?

@JackofAllMasterofNone

9 күн бұрын

You could but that is illegal.

Great video. I plan on doing this swap and was wondering if you had or knew where to find a step by step guide for doing the forscan part? It seems like there are a lot of options to go through in forscan and I would like to print of step by step instructions.

@JackofAllMasterofNone

2 жыл бұрын

Sorry but I don't think there is a step by step guide. You have to just educate yourself and be careful. You can easily mess up your truck.

@bantizzle79

2 жыл бұрын

@@JackofAllMasterofNone thanks for getting back to me. Im going to follow your steps in the video.

@charlys1219h

2 жыл бұрын

I noticed the you reply for this message but you haven't reply or answered my question.. where do bought the cluster ??? Why you don't want to knowing ???

@JackofAllMasterofNone

2 жыл бұрын

@@charlys1219h eBay. Just have to search for one

I have a problem with mine. I did all the steps but I dont have the turbo gage on the cluster. Is there a way to get it back?

@Mr.Mach1n3

2 жыл бұрын

Did you figure it out

Just came across your video. Where did you get your instrument cluster?

@JackofAllMasterofNone

3 ай бұрын

ebay

Very interesting. Thank you very much for the detailed video. I don’t think I have a function “Odometer Write” on my Crown Vic, unfortunately.

@JackofAllMasterofNone

2 жыл бұрын

Yes, only a small number of newer Fords support the odometer write function.

@andreik1775

2 жыл бұрын

@@JackofAllMasterofNone thank you for the reply, Jack.

Did you add the mirror spot lights to?

Will a 2015 work on an 2018. That's my only concern. Don't want to fork out 300-500 and it's not compatible.

@juan131382

Жыл бұрын

I have the same question. I found one in eBay but the selling told me it wouldn’t fit my 18’ and that I needed to get the right now for it. Which is $900 compare to the one he is selling for $550. So does it matter the year speedometer you get?

@Wrensspeedshop

Жыл бұрын

Did you ever get an answer to this? I believe it will but want to make sure. I’ve found a 15’ with milage slightly lower then mine, but want to make sure it’ll work. I’ve got a 2018 F150 XLT with sync 3 and 8” stereo screen

@JetFixxxer

Жыл бұрын

@@Wrensspeedshop No I did not. I ended up getting a 2019.

@Wrensspeedshop

Жыл бұрын

@@JetFixxxer I got ya. Thank you very much for getting back so quickly.

@F150EcoBeast

Жыл бұрын

A 2017 will. Just tried it on my truck and worked

Good afternoon. How do I change the shift selector display from PRNDM21 to PRNDM? checked thru forscan back and forth more than 10 times and can’t seem to find it.

Is it possible to edit the engine and idle hours in the new cluster??

Does Sync version matter, my 2016 XLT has sync the new dealer cluster from a Lariat is Sync 2

Great video! Did you also add power fold mirrors or just puddle lights? I noticed the switch in your vent trim? I looked for a video to see if you had one for that upgrade but I couldn’t find one. Nice truck brother!

@JackofAllMasterofNone

Жыл бұрын

My truck came with puddle lights and side spot lights but no power fold mirrors. I haven't added them either. Don't need them. Thanks for the compliment.

Do you know if it voids the trucks warranty when you switch out the cluster?

@JackofAllMasterofNone

2 ай бұрын

I'm sure it does. My truck is way out of warranty.

Will a 2019 4.2 work in my 2016 with the smallest screen?

Do the idle and engine hours transfer to the new cluster??

Ok now to find a new cluster for my 2015 F250.

Where do bought the cluster ? Can you post the link ?

@65mustanggtfastback

2 жыл бұрын

Look on ebay

Aside from the camera. How much did this whole set up cost u?

Awesome video and info.! I just added a steering wheel to my 2014 Ford F150 XL V8 5L from a 2016 Ford Expedition Limited. Can you help me program the buttons on the steering wheel as none of them work right now?

@JackofAllMasterofNone

Жыл бұрын

The buttons should work. There is no programming them. The expedition 2 years newer may not be compatible with your 2014 F-150.

Would the same apply to a 2016 navigator? How do you ensure the VIN is cloned?

That’s nice, where is the battery voltage monitor ?

@JackofAllMasterofNone

3 ай бұрын

Not sure what you mean

Which version do you buy when you go buy the programmer to flash your data to the new gauge

@JackofAllMasterofNone

2 ай бұрын

amzn.to/3CrLQ1n This will work fine

@alexgarcia2074

2 ай бұрын

When I try to run the forscan program for configuration and programming it says I need an extended license

@JackofAllMasterofNone

2 ай бұрын

Yes all of that was covered in the video You do need an extended license. forscan.org/download.html Will also need extended license (Instructions are on download page)

Where is the best place to buy a lariat instrument cluster and where to get the scanner you used?

Great job, also seem easy to follow. Do you have to add your vin also? I think I’m going to try it.

@armandopena8362

Жыл бұрын

Great question

@armandopena8362

Жыл бұрын

Let me know if you did figure this out

@SouthSideRidersMCNation

Жыл бұрын

I was able to get it done, thanks

Subscribed, hope to see more F150 content!

@BlueJeanF150

2 жыл бұрын

Besides updating mileage, can you do things like engine hours, trip meters, oil life percentage, etc? Edit, rewatched, I see where you showed the engine hours.

@deweyyates7057

2 жыл бұрын

@@BlueJeanF150 where in video did he redo the engine hours.

@BlueJeanF150

2 жыл бұрын

@@deweyyates7057 look at about the 22:15 mark You cannot reset engine hours, only add to (like the miles) and like he mentions, it’s done in seconds. Somehow mine got jacked up and I have 3000 hours instead of 300 so be careful.

@deweyyates7057

2 жыл бұрын

@@BlueJeanF150 do we put in exactly what is from our 4 inch cluster or do we have to convert that to seconds somehow.

@deweyyates7057

2 жыл бұрын

@@BlueJeanF150 did you put your engine hours , idle time and mileage just as it was on old cluster?

Great video , Thaaanks man

Curious why this cluster wouldn't work in a 2013..my 13 xlt cluster looks identical but never seen it done or offered by anyone

@JackofAllMasterofNone

Жыл бұрын

This will absolutely not work in a 2013. Completely different

Do you know the part number for the new cluster?

Thats awesome... but my truck only has 13k miles. I doubt ill find one with less

@JackofAllMasterofNone

2 жыл бұрын

Would be best for you to buy a new cluster in that case most likely

@JCortes001

2 жыл бұрын

@@JackofAllMasterofNone do you have any videos on how to add navigation?

My trucl dont have that ipc configuration whta can i do?

I tried to rewrite the engine hours in idle time under the forscan IPC I would write it in seconds once I hit right I got the message saying incomplete failed anyone know why

@romneyr5356

4 ай бұрын

I read you have to put hours x 3600 for accurate hours to show. Check the forums.

I bought one off a guy with about 30k more miles on it than my truck has, you said there is a way to get them to go back down, how might I do that? Serious question

@leonardmoreno8401

Жыл бұрын

The only way to do that is against the law and don't think anyone would show you that through this medium

My base cluster doesn’t have the 2 1 after the prndm…. Will this still work. My truck is 2018 3.5 eco with 10 speed. Thanks

@JackofAllMasterofNone

2 жыл бұрын

Yes it should still work fine

I bought a cluster and the guy lied about the miles and it has 125k and mine has 73 k is there any way to get the 125k cluster programmed to 73k?

@JackofAllMasterofNone

Жыл бұрын

Possibly a speedometer shop. If you search around on eBay people offer the service.

تقني بارع ودقيق وشكرا للطافته

I added a 22 cluster to a 21 f250 but have a weird chime when driving and turning wheel no lights or warnings

@JackofAllMasterofNone

Жыл бұрын

Humm. I'm not sure about the compatibility after 2020 models. Did you flash your as built data from the original cluster to the new one?

@robbiemorris4323

Жыл бұрын

@@JackofAllMasterofNone yes I did I’m thinking it may be the adaptive steering has a different clock spring but I’m lost

Is there a way to update a cluster in a 2016 platinum to have the newer stuff like the speed limit sign next to the speedometer and everything?

@JackofAllMasterofNone

2 жыл бұрын

All that info comes from the navigation system. You would have to upgrade to sync 3 most likely.

I know this video is old but I didn’t see this asked before and may be a dumb question… do I need to find a cluster from the same engine size?

@JackofAllMasterofNone

Жыл бұрын

Engine size doesn't matter

The driving modes works ? I replace my 2020 STX IPC with a raptor 2020, All works fine wiathout boost gaguge and the Driving mode selector.

@xdmaino488xd8

2 жыл бұрын

Did you find a fix?

@fmangua

2 жыл бұрын

@@xdmaino488xd8 not yet. Trying to search in forscan any missconfig. But all looks good

@xdmaino488xd8

2 жыл бұрын

@@fmangua I’ve searched too but can find anything on it i swap my oem one back in and i can change driving modes weird that the 8inch doesn’t work

can this be done with the 21 f150?

Was the upgrade worth it and have you hade any problems from it? Thanks

@JackofAllMasterofNone

Жыл бұрын

Works great. Absolutely no problems

Will this work for a 2017 f-450?

Is there a place to buy the cluster from the raptop or sport model? I have forscan and the scan tool just trying to price the cluster and the option I can get with forscan compared to what one seller can do with lights logos and sport mod ect...

@JackofAllMasterofNone

Жыл бұрын

eBay

Did i need 2 keys or i can do it with 1?

@JackofAllMasterofNone

2 ай бұрын

Keys don't matter for the instrument cluster upgrade

@ManuelCervantes-gz5rg

2 ай бұрын

@@JackofAllMasterofNone it works if i find the same cluster similar miles and functions plug and play or still need to do the programming ? Thanks

Can you use the boost/vac gauge on the 5.0 truck with a S/C or turbo?

@JackofAllMasterofNone

2 жыл бұрын

Not sure. I doubt it. Unless the 5.0 uses the same sensor to read vacuum / boost

Excellent video, Where did you buy the unit from?

@JackofAllMasterofNone

Жыл бұрын

4D tech

will this work for plug and play ? i found one with 1217 less miles than mine

@JackofAllMasterofNone

2 жыл бұрын

Most likely not. It will function but you will have multiple errors on the display every time you start the truck if it doesn't match the feature set of your truck exactly.

Thanks for the video!!! Any cluster from any year would work ?

@JackofAllMasterofNone

Жыл бұрын

No. There were changes with the 10 speed transmission in 2017. I would try to stick to the same year cluster if possible.

@sergiocubillos6164

Жыл бұрын

@Jack of All Master of None any problems with the gauges or do they show everything normal ?

@JackofAllMasterofNone

Жыл бұрын

@@sergiocubillos6164 Once programmed correctly like I show in the video everything works perfect just like it would have come from the factory. Its all in the video.

When I write all for my old cluster data to the new cluster that took away all the new clusters features my old cluster didn’t have anyone else have this issue.

@grantwestover1312

10 ай бұрын

So you got into the bcm or bdycm I think forscan calls it and turn on off-road display

@JackofAllMasterofNone

9 ай бұрын

It's the baseline you need to be at. Now you can go back with forscan and just enable the specific features that you want to add that your truck will support. For instance the compass in the display won't work if you don't have a compass module. You will have a bunch of error messages if you don't flash to your OEM build code

@grantwestover1312

7 ай бұрын

Thank you so much your video helped a lot and I really appreciate the time you took to make a detailed video like that .

Have you turned on any of the “other options” on your 8” display? Like Air-fuel ratio, for example. If so, where do you see those gauges? Thanks

@JackofAllMasterofNone

2 жыл бұрын

I have not messed with it yet. Sorry

Do you have to manually change the enging hours? Or does it transfer over?

@JackofAllMasterofNone

2 жыл бұрын

I believe you need to manually edit them

@civicvt94

2 жыл бұрын

@@JackofAllMasterofNone so the only thing i need to manually do is the mileage and the hours? Also for the mileage do i put in the decimal and the numbers after. Or just the numbers before the decimal?

When I try to get IPC configuration it says " sorry, you need an extended license to run this function" ???

@JackofAllMasterofNone

Жыл бұрын

Yes. You need an extended license forscan.org/forum/viewtopic.php?p=67017#p67022

@james8226

Жыл бұрын

@@JackofAllMasterofNone got it done, thanx

What year clusters will work?

@5.0bsessed

4 ай бұрын

Any luck?

Would an f150 cluster world in a f250 gas 6.2? Same engine right?

@JackofAllMasterofNone

Жыл бұрын

No

@Jimmyl1521

Жыл бұрын

Can I do this with my 21 f150?

So your telling me I can buy another cluster and change the mileage 😮 that way I can sell my truck for more

@JackofAllMasterofNone

Жыл бұрын

That would be illegal (felony crime) and you would go to prison if caught and convicted. But yes. It's that easy.

Do you think this process would work going from 2" to 4"?

@JackofAllMasterofNone

Жыл бұрын

Yes. In fact it's the exact same procedure.

Please help me someone

Does this process work the same with a brand new cluster?

@JackofAllMasterofNone

2 жыл бұрын

It should yes. I can not 100% guarantee that though. Usually dealers order them with the mileage pre programmed so I'm not sure if you bought a new one if they would ask... Programming it with as built data would be the same.

Will this work on my 2015 xlt

@JackofAllMasterofNone

Жыл бұрын

Yes

What year is your truck and what trim?

@JackofAllMasterofNone

Жыл бұрын

Mine is a 2015 XL trim

Does this work on f250's aswell?

@JackofAllMasterofNone

Жыл бұрын

Should be the same procedure but can't guarantee it as I havent personally done a super duty of this generation

Nice

Did yours come from an f150

@JackofAllMasterofNone

Жыл бұрын

Yes

Can you please tell us where we can buy the 4in and 8in clusters?

@JackofAllMasterofNone

Жыл бұрын

Ebay

@KelliKlassen

6 ай бұрын

I have a 4in for sale if you have yet to find one

Where can I find one

@JackofAllMasterofNone

Жыл бұрын

eBay

Link to clusters??

@JackofAllMasterofNone

9 ай бұрын

Junkyard or eBay Good luck.

I’m not seeing ipc, what’s wrong?

@JackofAllMasterofNone

Жыл бұрын

What obd device are you using? If using the bbfly one with the switch, you have to switch it when prompted

@leakerlema9772

Жыл бұрын

@@JackofAllMasterofNone im using the cheap one you have in the description and i flip it to the right and nothing

I did the swap and i cant go to sport mode any fixes?

@JackofAllMasterofNone

2 жыл бұрын

Did you inhale the as built data from your OEM cluster and then flash it to the new one?

@xdmaino488xd8

2 жыл бұрын

@@JackofAllMasterofNone yes all the errors were removed but cant change to either tow mode or sports mode

@JackofAllMasterofNone

2 жыл бұрын

@@xdmaino488xd8 What year is your truck? Im not sure what would cause that except maybe the wrong year instrument cluster possibly.

@xdmaino488xd8

2 жыл бұрын

@@JackofAllMasterofNone 2019 XL yea im assuming its the cluster

@xdmaino488xd8

2 жыл бұрын

@@JackofAllMasterofNone cluster is out of 2016 6 speed my truck is a 6 speed 2019

Will forscan work on Mac?

@JackofAllMasterofNone

2 жыл бұрын

No

@2livecrew270

2 жыл бұрын

Actually it could, but you would need to download vmware and open up a virtual windows pc on a separate partition. Watch KZread videos how to do that.

I followed your steps and was able to swap clusters and change odometer, engine hours and idle hours. Only issue I am having is getting the DTE to show above the fuel level and the digital temperatures to show above the coolant and transmission gauge. Any suggestions on how to add that?

@tnfrosty

2 жыл бұрын

I'm about to swap clusters. I understand the process for the odometer, but did you have to do anything for the engine hours or did they match what was on your old cluster? Might check "Ricardo's Workshop" channel for your question - he has a bunch of Forscan videos.

@bantizzle79

2 жыл бұрын

@@tnfrosty yes I had to change the engine and idle hours. You have to enter the amount of seconds for the engine and idle hours. The new forscan is pretty useful because no spreadsheet is needed, but I wish it was easier to navigate to the option you want to adjust

@tnfrosty

2 жыл бұрын

@@bantizzle79 Much appreciated!

@bantizzle79

2 жыл бұрын

@@tnfrosty let me know if DTE shows up for you or how you enabled it.

@bantizzle79

2 жыл бұрын

@@tnfrosty i figured it out. All of the gauges show numerical numbers above them now. I had the wrong spreadsheet code at first.

Can you just have the lariat cluster or can a king ranch cluster go in and in what order should I buy the things to set this all up