thanks. I just programed today. it worked.

I checked the link on Amazon, your product isn't available. Us there any other link

Can this copy an anytime fitness purple key fob?

This might be a dumb question but, Can I make a key fob into a remote control key fob? I live in one of those older apartment where you have to get out or stick you head out far enough to use my key fob to open a community garage.

@tinylabs

3 жыл бұрын

Not a dumb question! Granted your apartment's key fob is compatible, you can copy it onto the Keysy Duplicator remote and put it into long range mode as seen in this video kzread.info/dash/bejne/aWis2pNpqtbFp84.html

After copying can the button on the Keysy be used to operate from a distance, instead of holding the fob against the reader like I would need to with the HID fob? Thanks.

@tinylabs

3 жыл бұрын

Hello! Some users report they can hold Keysy further from the reader than their original keyfob. Keysy can also be put into long range mode, which is useful in certain situations when you cant get close to reader (E.g. parking garages) instructions on how to enable long range mode can be found here: kzread.info/dash/bejne/aWis2pNpqtbFp84.html

When I try to copy an original the red led blinks about 10 or 11 times at one blink per second compared to your demo. And I keep getting the Amber color. Does the slow red blink indicate an issue during copying?

@tinylabs

4 жыл бұрын

Hello! The slow red blink means Keysy is reading the card or keyfob. The amber blink indicates an unsuccessful read. Please try flipping over the keycard or keyfob and trying different areas. If the amber light persists the keyfob you're trying to copy may not be compatible. For additional support please contact info@tinylabs.io thanks!

What's the best writer for HID Corporation 1346 ProxKey III Key Fob for extra keys?

@tinylabs

5 жыл бұрын

You're in luck, Keysy can clone HID Proxkey fobs. Our store tinylabs.io/store/

I have a 2017 Honda Fit, I have a keyless entry key fob. Is there some way I can copy what ever the proxy code would be to a key card kind of like how Tesla has on their cars? Thank you! I am sick of forgetting my keys in the house, I don't forget my wallet as often. it would be very helpful

@tinylabs

3 жыл бұрын

Keysy won't work for what you're trying to do. Sorry!

@jeremylelea3758

2 жыл бұрын

@@tinylabs Can i somehow take apart my key fob and take the chip that allows me to start my car, and put that in my wallet?

@tinylabs

2 жыл бұрын

@@jeremylelea3758 I'm not familiar with the Honda Fit key fob specifically, typically these type of automotive key fobs require a coin cell battery, in which case putting that in your wallet wouldn't work out well

I would really love to see a version of the Keysy that can do mifare cards and also have a few more buttons. Anyone know of anything similar?

@tinylabs

3 жыл бұрын

Besides the proxmark 3 developmental kit, we do not know of any other device that can store more than 4 tags at once.

@TheZaz969

3 жыл бұрын

Theres an android app called MiFare classic tool. This will read and write mifare cards with an nfc enabled phone. You can try that.

@DeadlyVenomKing

Жыл бұрын

kzread.info/dash/bejne/ZWqgu5uoo9e8lKw.html

I followed all these steps but the clones did not work (the keysey gave the correct confirmation lights) any ideas are some readers resilient to copy? Thanks! Do I need to purchase an authentic HID RFID blank and write to that?

@tinylabs

2 жыл бұрын

Hi Mike, the one caveat with HID key fobs is if your building has HID muliClass door readers the emulation (play back) on the Keysy remote will not open the door. In these cases the included Keysy rewritable key fob will need to be used. Please send us a message at info@tinylabs.io if you continue having problems. We will help you with this! Thanks for reaching out.

my building used one of the HID keyfob. When I used the chinese made RFID reader it read " HID card reading success!Replace the 5577/'s card" so is this mean this is a t5577? I see they have couple type out there from HID. How can i tell which keyfog is the one i have? Is the Keysy will work on my keyfob? Should I buy the Keysy and the Keysy RFID Duplicator? thank's

@tinylabs

2 жыл бұрын

Send us a picture of your building's key fob to info@tinylabs.io -- we will determine compatibility. Thanks!

Where can I buy the KF-001 please? Most duplicators do not seem to come with this

@tinylabs

2 ай бұрын

Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)

I bought a cheaper one on amazon and I duplicated the hid card in the video but when I used the rewritable one, it worked , but the original key fob buzzed the green light as if it worked but the actual door did not open, so I guess it’s useless now. Will this device be able to fix it

@tinylabs

3 жыл бұрын

That's strange. Not sure what happened with the other cloner. Keysy most likely will not fix your original card. Keysy only reads the original. Its not designed to write to the original

i have a HID prox fob for my condo and my question is there any ways i can copy the fob to become a garage door remote? because my condo has a fob detector mount it really far way on the wall and every time i have to get off the car and run to the wall to touch the fob and than run back to the car before the gate close.

@tinylabs

3 жыл бұрын

An HID prox can't be changed from a fob to a garage door style remote unfortunately. One thing worth trying would be to put keysy in high power mode which will increase the range about 12". Follow the instructions in this video: kzread.info/dash/bejne/g5upxsqlfarNlrw.html Thanks!

I have a Keri key fob.. would this work with that? I have no idea about all the different types of fobs..

@tinylabs

3 жыл бұрын

Hi Mike! Thanks for reaching out. Yes Keysy can copy Keri fobs. Full compatibility list can be found here: bit.ly/keysy_compat

It’s same generation as very first Keysy or that’s 2nd gen?

@tinylabs

4 жыл бұрын

The current first generation Keysy is shown in this video.

Can I rewrite an HID Prox 1346 key fob to another rewriteable fob (other than a keysy brand)?

@tinylabs

2 жыл бұрын

Keysy can only write to Keysy branded key fobs, key cards, stickers, and wristbands.

Hi, do you know what the difference is between Rosslare Key Fob AT-ERK-26A7TB0 and Rosslare AT-R271GJ Key Fob? are they both 125 KHz

@tinylabs

4 жыл бұрын

Hello, keysy was not tested with Rosslare. You can send a photo of your keyfob to compat@tinylabs.io and we’ll get back to you. Thanks!

(SEPTEMBER 2023) I CONCUR THIS THING WORKS BETTER THAN ALL THE CHEAP AND HIGH-END, HANDHELD READER/WRITER/COPIER ELECTRONIC DEVICES OUT THERE NOW. NO NEED FOR TOUCH SCREEN, FREQUENCY TUNING, OR VIEW SCREEN. UNFORTUNATELY, THE SYSTEM IS PROPRIETARY SOFTWARE FOR KEYSY PROGRAMMING AND FUNCTIONALITY. UNFORTUNATELY, I AM STILL FIGURING OUT HOW TO OVERRIDE THEIR SYSTEM TO WORK WITH GENERIC KEY REMOTES, CARDS AND KEY FOBs.

Will it copy hid proximity key cards? Not the fob, but the white cards?

@tinylabs

3 жыл бұрын

Hello! Yes keysy can copy the hid prox cards. Due to the larger coil in the cards it may take several attempts. Don't be defeated though! Theres usually a sweet spot that is different on all cards. If you run into trouble please email us at info@tinylabs.io for support. Thanks!

I have a question. The video shows how to copy a HID fob to a REWRITABLE Keysy fob. But can the device duplicate to a HID 1346 ProxKey III Key Fob?

@tinylabs

2 жыл бұрын

No, Keysy cannot duplicate to a HID prox key fob. Only Keysy branded rewritable key fob, key card, sticker, or wristbands can be written to. Thank you for the question!

@josephb9167

2 жыл бұрын

I am looking for a way to do this, if you know of one, please let me know!

@josephb9167

2 жыл бұрын

I really appreciate Keysy and its capabilities but I bought it thinking it would copy an HID fob to ANOTHER HID fob, not just to a Keysy rewritable. How can I do this?

i have a light grey keri key fob shaped like a tear drop. would this work on that?

@tinylabs

4 жыл бұрын

Yes. The full compatibility list with photos can be found here: tinylabs.io/keysy/keysy-compatibility/

@gailland8681

3 жыл бұрын

@@tinylabs I have a question. we lost a remote "key" for a car. it's not really a key but a remote clicker to unlock the doors and to place inside the car in order to start the ignition.. I don't know how you call this..

Does this work with the ioprox p40 keys? My apartment wants to charge $300 for a lost keyfob!

@tinylabs

4 жыл бұрын

Yup Keysy can clone it! Full compatibility list: tinylabs.io/keysy/keysy-compatibility/

@chaley9093

3 жыл бұрын

So let me understand, you want anyone to be able to clone YOUR apartment fob? Not a place I would live.Be responsible, and pay it!!!!!!!!!! You had to sign an agreement.

@ryankinney6966

9 ай бұрын

That has nothing to do with being responsible, it’s being sensible because the hardware is not worth $300 for her slumlord to make a profit.

When will these duplicators be available again?

@tinylabs

2 ай бұрын

Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)

Hi, I’m trying to copy my condo key fob. The fob works but when trying to copy to a keysy sticker or even the supplied fob it just blinks red three times and that’s it

@tinylabs

2 жыл бұрын

Hi Alden, thanks for bringing this to our attention. Sorry for the inconvenience, we will help you with this. Please email your order number to support@tinylabs.io -- we look forward to hearing from you.

Are u be able to copy the Hid i class key fob? I couldn’t make it tho

@tinylabs

4 жыл бұрын

Sorry, HID iClass keyfobs are not supported. The full comparability list can be found here: bit.ly/keysy_compat

My building uses a CDVI key fob to enter the apartment building, It does not take batteries. What frequencies do they use? I did a test and placed the fob in an RFDI blocking wallet and a farady bag. I was still able to open the door. Anyone know why?

@tinylabs

Жыл бұрын

CDVI tags use high and low frequency RFID. Typically RFID blocking wallets and bags block High Frequency. To help determine compatibility for your CDVI tag with Keysy, please email us a picture at info@tinylabs.io -- Thanks!

It's not re writing. It copied. Not re writing. Also the copy I have on the remote isn't working on my s2 system. Great device you have here keysy

@tinylabs

2 жыл бұрын

Sorry you're having trouble, for Keysy support please contact support@tinylabs.io

I want to use this to access the pool at the hotel down the street from me, so I can by-pass the elevator and pool entrance, but don't have a room key, how can such a fantasy be fullfilled? lol..is there an average frequency I should know about, or??

@tinylabs

Жыл бұрын

Hotels use high frequency (encrypted) key cards that are Not compatible with Keysy. Thanks for the question!

got today wow how cool mad sick .. The reader the reader and lcd on the desk can have the code for it pls . i can make a small pcd for it and have a portable hid rfid reader / tester thank you Pawel

@tinylabs

Жыл бұрын

We pieced together the LCD display with spare parts and unfortunately don't have a parts list. We can email photos of the PCB if you reach out to us at info@tinylabs.io - thanks!

Tried the site and all they offer is items similar to the same one you are advertising, no price, no item to order, no info on it, only one picture then it goes on to other accessories but no duplicator. ebay has none, one seller in ebay told me, they were discontinued and new ones are in back order only from company. really liked this duplicator.

@tinylabs

Жыл бұрын

The microchip shortage has caused some manufacturing delays for the Keysy 4-button duplicator remotes in 2022. More inventory will be available mid September 2022. Please email info@tinylabs.io if you have any other questions - thanks for reaching out!

Can keysy clone from one hid iclass to another hid iclass?

@tinylabs

4 жыл бұрын

As the other user stated, Keysy does not support iClass. Sorry!

Can it copy Paradox C704 Blue Proximity Key Tag? 2nd question how to know if it is hid or rfid type? Both are 125khz.

@tinylabs

Жыл бұрын

Hello! Keysy is not compatible, unfortunately. We recommend using CloneMyKey to make a copy - if you would like a promocode please send us an email! info@tinylabs.io

@MrBurty007

Жыл бұрын

@@tinylabs Can I get Technical data on this Paradox C704 fob? Or can you direct me to get technical data from elsewhere? Like, processor, how many bits etc?

@tinylabs

Жыл бұрын

@@MrBurty007 I'm not sure of the bits as Paradox isn't a fob we support, here is the info we have on it: Manufacture: Paradox Alternative Names: C704, CR-R704-B Format Names: Paradox Proprietary Format Technology: Radio Frequency Identification (RFID) using low frequency data transfer Key Type: Low Frequency Contactless/Proximity Key Fob Dimensions: 1.18″ x 1.42″ x 0.20″ Weight: 0.2 oz (5.67g) Material: ABS Plastic with ultrasonic welding Antenna Size: Medium Antenna Geometry: Round Modulation: Frequency-shift keying (FSK) Interface: Wiegand Typical Range: Less than 12 inches Bit Length: Unknown Facility Code Range: 1-254 Storage Capacity: Less than 1K Encryption: None Security: Low Security (Class A)

@MrBurty007

Жыл бұрын

@@tinylabs Thank you very kind of you.

Hello. Is there anyway that my building management will know that i created 2 clone fabs ?

@servantbyday

9 күн бұрын

There’s no way for them to know. The only time this could be detected is if you used a fob with a door that was used to enter and exit. Even then, someone would need to compare timestamps.

@88jesslosi

9 күн бұрын

Thank u so much !

@tinylabs

Күн бұрын

Keysy makes an exact copy of the original. To your buildings access-control audit log it will appear identical to the original. The only difference will be the Keysy fob will look physically different than your original. Sorry for the late response!

What if I wanted to get the frequency from the reader and put that into the fob

@tinylabs

7 ай бұрын

Check our compatibility page for your buildings fob, if you don't see it, please send us a picture! tinylabs.io/keysy/keysy-compatibility/

I think my Keysy is broken. It blinks red very slowly and then flashes yellow. Can you help with this?

@tinylabs

Жыл бұрын

Sorry you're having trouble and yes we can help with this. Please email us at orders@tinylabs.io and we will sort this out for you. Thanks!

What is the device that is displaying the ID?

@tinylabs

4 жыл бұрын

Hi Gerald, its a custom built display we built. Sorry, its not for sale :)

@sethagesq

2 жыл бұрын

Hi. I would pay you to make one for me. Would that be possible.

Can you write to NFC stickers?

@tinylabs

3 жыл бұрын

Hi Jay, sorry for the late response! No Keysy does not write to NFC stickers.

Why does mine blink red instead of green when initially hitting a button

@tinylabs

2 жыл бұрын

If there is a key fob credential saved to a button the Keysy remote will flash a Green LED when pressing a button. If nothing is saved to a button you will see a Red LED flash. Please reach out to us at info@tinylabs.io if you have any other questions! Kind Regards -Tiny Labs

Does this work with ProxCard II?

@tinylabs

Жыл бұрын

Yes, Keysy can copy HID Proxcard II - send us a message at info@tinylabs.io if you have any other questions. Thanks!

Can this copy a car key to one of those fobs

@tinylabs

3 жыл бұрын

Keysy will not copy car keys, sorry!

how long to ship to us???

@parkeryo

3 жыл бұрын

I ordered in the morning and got a shipping notification the same day

Can we move it to apple wallet?

@tinylabs

14 күн бұрын

Unfortunately, no. That is not possible

Can't write to another HID Proxy; only copy from original HID

@tinylabs

9 ай бұрын

The Keysy 4-button Duplicator can only write to Keysy branded key fobs, cards and stickers. Please reach out if you have any other questions! info@tinylabs.io

44 bucks? I might as well just buy the fob from the complex and save money

@Drefrmda404

4 жыл бұрын

miguel R must be nice, the shit 75 where I’m at lol fuck that

@DeadlyVenomKing

4 жыл бұрын

Buy the device then sell copies of keys to whoever needs it

@tinylabs

3 жыл бұрын

Excellent idea ;)

@Windows98R

Жыл бұрын

Some complexes don’t give u more than the original number. Mines like that so I just replicated one.

@Username-es1iy

Жыл бұрын

@@Windows98R ran into same issue ended up buying similar product, fkin worth it

I followed the instructions, but it still shows orange.

@tinylabs

2 ай бұрын

Sorry you're having trouble making a copy-- please email us a picture of your key fob to support@tinylabs.io - we will help sort this out!

@Mitez77

2 ай бұрын

It was the same HID key fob in the video. It is gone now since I got a copy.

Ned that

Tried with an eBay one but didn't read. :(

@tinylabs

2 жыл бұрын

We're sorry to hear that! Send us an email at info@tinylabs.io and we will definitely help you with this.

@StefTechSurfer

2 жыл бұрын

@@tinylabs oh, I meant a different kind.

Would you say it danger to install something like this in your house.. I would love to just do that and walk in.. but I know hackers are out there.

@tinylabs

4 жыл бұрын

Hi Tony, this particular technology is typically used to protect low value assets such as common areas, pools, gyms, lobbies and elevators of condos. RFID technology which uses encryption would be ideal for the front door of a house. Thanks for the comment!

where can I get the Hid fob. and will it work to duplicate it?

@tinylabs

3 жыл бұрын

Hi Gail! Keysy will copy most HID fobs on our keysy rewritable key fobs. Full compatibility list with example photos can be found here: bit.ly/keysy_compat