i tried to copy a schlage the light is not turning green but orange
@tinylabs23 күн бұрын
Sorry you're having trouble copying your Schlage fob. Double check you have the supported Schlage fob thats marked with a 7610 - tinylabs.io/keysy/keysy-compatibility/ -- if you have more questions or need help, please email us at [email protected] -- thank you!
@88jesslosiАй бұрын
Hello. Is there anyway that my building management will know that i created 2 clone fabs ?
@servantbydayАй бұрын
There’s no way for them to know. The only time this could be detected is if you used a fob with a door that was used to enter and exit. Even then, someone would need to compare timestamps.
@88jesslosiАй бұрын
Thank u so much !
@tinylabs23 күн бұрын
Keysy makes an exact copy of the original. To your buildings access-control audit log it will appear identical to the original. The only difference will be the Keysy fob will look physically different than your original. Sorry for the late response!
@crumbcake11Ай бұрын
I have a question. Once I assign a signal to the device-the triangle for example- Can I simply over write with a new signal using the triangle again? Also, will the clone fobs hold more than one signal? Or just 1 signal per fob? Thanks very much. Great product.
@tinylabsАй бұрын
Correct, you can copy over any saved key on the Keysy 4-button Remote. The stand alone Keysy key fobs and key cards can only hold one credential at a time. Writing a new credential will write over the last one. We appreciate you giving Keysy a try! Please let us know if you have any other questions.
@sound8903Ай бұрын
Can we move it to apple wallet?
@tinylabsАй бұрын
Unfortunately, no. That is not possible
@Mitez773 ай бұрын
I followed the instructions, but it still shows orange.
@tinylabs3 ай бұрын
Sorry you're having trouble making a copy-- please email us a picture of your key fob to [email protected] - we will help sort this out!
@Mitez773 ай бұрын
It was the same HID key fob in the video. It is gone now since I got a copy.
@VirginWizard-or6lq3 ай бұрын
Where can I buy the KF-001 please? Most duplicators do not seem to come with this
@tinylabs3 ай бұрын
Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)
@60seattle6 ай бұрын
Question my fob has two different purposes it opens the complex doors. It also opens the garage gate but I can only copy for the doors. I need the copy for both. How do I do that?
@tinylabs6 ай бұрын
Keysy cannot copy the long range push-button function. That part will need to be copied by a remote copying service. Send us an email if you would like a referral to a copying service - [email protected] - thank you for the comment!
@user-pf9cm6ch8w7 ай бұрын
Once you write the data on one of the cards can how do you erase it to use the card for something else? Or does it's erase what you put on there first once you add new key data to it?
@tinylabs7 ай бұрын
No need to erase anything, writing new key data onto a key card will overwrite the existing stored key. Thanks for the question!
@user-tr4uq2qt3l8 ай бұрын
What if I wanted to get the frequency from the reader and put that into the fob
@tinylabs8 ай бұрын
Check our compatibility page for your buildings fob, if you don't see it, please send us a picture! tinylabs.io/keysy/keysy-compatibility/
@Doiphie8 ай бұрын
So can it only read RFID or also NFC? and do you need keys from keysy to copy or normal nfc or rfid cards or chips
@tinylabs8 ай бұрын
Keysy copies RFID (not NFC) and Keysy can only write copies to Keysy branded rewritable key fobs, cards, stickers and wristbands. Thanks for the question @Doiphie!
@patriaurena81768 ай бұрын
Es los mejor yo tengo copias muy buenos resultado
@tinylabs8 ай бұрын
¡Hola! Gracias por las amables palabras. ¡Apreciamos que se tome el tiempo de dejarnos un mensaje! :)
@easyriderbubba10 ай бұрын
Can't write to another HID Proxy; only copy from original HID
@tinylabs10 ай бұрын
The Keysy 4-button Duplicator can only write to Keysy branded key fobs, cards and stickers. Please reach out if you have any other questions! [email protected]
@BLACKMENTALHEALTHANDRACEBMHR11 ай бұрын
(SEPTEMBER 2023) I CONCUR THIS THING WORKS BETTER THAN ALL THE CHEAP AND HIGH-END, HANDHELD READER/WRITER/COPIER ELECTRONIC DEVICES OUT THERE NOW. NO NEED FOR TOUCH SCREEN, FREQUENCY TUNING, OR VIEW SCREEN. UNFORTUNATELY, THE SYSTEM IS PROPRIETARY SOFTWARE FOR KEYSY PROGRAMMING AND FUNCTIONALITY. UNFORTUNATELY, I AM STILL FIGURING OUT HOW TO OVERRIDE THEIR SYSTEM TO WORK WITH GENERIC KEY REMOTES, CARDS AND KEY FOBs.
@rgl168 Жыл бұрын
Hi, the 4-button device is out of stock on Amazon. When will it be available again?
@tinylabs11 ай бұрын
Hello! Keysy is now back in stock on Amazon and our Tiny Labs website.
@flinchmop1164 Жыл бұрын
When will these duplicators be available again?
@tinylabs3 ай бұрын
Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)
@rosemarybrocco Жыл бұрын
Just purchased Kesey from you. It is copying the unsalable to the Kesey remote, but will not reprogram the Kesey fob. Please help!
@tinylabs Жыл бұрын
Hi Rosemary! Thank you for the question, I believe we have helped you via eBay - if you still need help or have questions please email us at [email protected]
@canhogiatotnhatsaigon6659 Жыл бұрын
hi tony , thanks for video .can i get link sofware? Thanks Tony . mail: [email protected]
@baireshop5665 Жыл бұрын
I buy and Only Put in Ámbar color. No green 😢
@tinylabs Жыл бұрын
We would be happy to help with this! Please email us at [email protected]
@Quickfiya Жыл бұрын
Does this work with ProxCard II?
@tinylabs Жыл бұрын
Yes, Keysy can copy HID Proxcard II - send us a message at [email protected] if you have any other questions. Thanks!
@ShitsNGiggles14 Жыл бұрын
@tinylabs if I already have something copied and then I need to copy something different how do I reset to copy something else over it?
@tinylabs Жыл бұрын
Hello! You can copy over a stored tag on the Keysy remote infinitely. The process is the same as if its the first tag you are copying. You if you run into any trouble please send us an email at [email protected]
@dtv5362 Жыл бұрын
My building uses a CDVI key fob to enter the apartment building, It does not take batteries. What frequencies do they use? I did a test and placed the fob in an RFDI blocking wallet and a farady bag. I was still able to open the door. Anyone know why?
@tinylabs Жыл бұрын
CDVI tags use high and low frequency RFID. Typically RFID blocking wallets and bags block High Frequency. To help determine compatibility for your CDVI tag with Keysy, please email us a picture at [email protected] -- Thanks!
@jordanjack4629 Жыл бұрын
Any chance you guys are going to develop a fob the same size and shape as an AirTag? There are a lot of cases and things like wallets or lanyards that have a slot for an AirTag, and having a keyfob that fits in those would be amazing. EDIT: On the same page as an AirTag, developing a way to import RFID keyfobs for NFC to iPhones or an Apple Watch with Apple Wallet could be a big prospect for you guys.
@tinylabs Жыл бұрын
Thanks for the suggestions! We don't currently plan to have an RFID solution in an airtag form. We do have small round Keysy plastic tags, they are much smaller than an Airtag. We are developing a new version of Keysy that will be compatible with all 125kHz fobs and key cards.
@ph2hi359 Жыл бұрын
Can the keysy card be writen by a indala26 program?
@tinylabs Жыл бұрын
We do not recommended writing to Keysy cards with anything other than the Keysy 4-button Duplicator remote
@naack Жыл бұрын
Is this out clone raw data ? Can it be modified instead ?
@tinylabs Жыл бұрын
Keysy can only make a 1 to 1 copy of the original key fob. Don't hesitate to send us an email if you have more questions - [email protected]
@dinadiana305 Жыл бұрын
Hi does it works with Kantech Fobs?
@tinylabs Жыл бұрын
Yes, Keysy can copy Kantech ioProx fobs. If you have any other questions feel free to send us a message at [email protected]
@ThePawel8888 Жыл бұрын
in your video u have a hid reader lcd demo is that run on a Arduino . i have a lcd and a reader can i have the code and wiring diagram pls Thanks
@ThePawel8888 Жыл бұрын
in your video u have a hid reader lcd demo is that run on a Arduino . i have a lcd and a reader can i have the code and wiring diagram pls Thanks
@ThePawel8888 Жыл бұрын
got today wow how cool mad sick .. The reader the reader and lcd on the desk can have the code for it pls . i can make a small pcd for it and have a portable hid rfid reader / tester thank you Pawel
@tinylabs Жыл бұрын
We pieced together the LCD display with spare parts and unfortunately don't have a parts list. We can email photos of the PCB if you reach out to us at [email protected] - thanks!
@franklydoodle350 Жыл бұрын
I think my Keysy is broken. It blinks red very slowly and then flashes yellow. Can you help with this?
@tinylabs Жыл бұрын
Sorry you're having trouble and yes we can help with this. Please email us at [email protected] and we will sort this out for you. Thanks!
@AlexWohlbruck Жыл бұрын
do these work as standard rfid keys? is there anything special/proprietary about the awid fobs or can I buy any old rfid fobs online?
@tinylabs Жыл бұрын
Keysy makes an identical copy of AWID fobs and cards that can be used just like the original. Hopefully this answers your question, if you need clarification please email us at [email protected]
@-hx7on Жыл бұрын
does it work with SecuraKey RKKT-01, RKKT-02 ? thanks
@tinylabs Жыл бұрын
Yes, Keysy is compatible with your Radioking (Securakey) fob. Thanks for the question
@omw9965 Жыл бұрын
Tried the site and all they offer is items similar to the same one you are advertising, no price, no item to order, no info on it, only one picture then it goes on to other accessories but no duplicator. ebay has none, one seller in ebay told me, they were discontinued and new ones are in back order only from company. really liked this duplicator.
@tinylabs Жыл бұрын
The microchip shortage has caused some manufacturing delays for the Keysy 4-button duplicator remotes in 2022. More inventory will be available mid September 2022. Please email [email protected] if you have any other questions - thanks for reaching out!
@MrBurty0072 жыл бұрын
Can it copy Paradox C704 Blue Proximity Key Tag? 2nd question how to know if it is hid or rfid type? Both are 125khz.
@tinylabs2 жыл бұрын
Hello! Keysy is not compatible, unfortunately. We recommend using CloneMyKey to make a copy - if you would like a promocode please send us an email! [email protected]
@MrBurty0072 жыл бұрын
@@tinylabs Can I get Technical data on this Paradox C704 fob? Or can you direct me to get technical data from elsewhere? Like, processor, how many bits etc?
@tinylabs2 жыл бұрын
@@MrBurty007 I'm not sure of the bits as Paradox isn't a fob we support, here is the info we have on it: Manufacture: Paradox Alternative Names: C704, CR-R704-B Format Names: Paradox Proprietary Format Technology: Radio Frequency Identification (RFID) using low frequency data transfer Key Type: Low Frequency Contactless/Proximity Key Fob Dimensions: 1.18″ x 1.42″ x 0.20″ Weight: 0.2 oz (5.67g) Material: ABS Plastic with ultrasonic welding Antenna Size: Medium Antenna Geometry: Round Modulation: Frequency-shift keying (FSK) Interface: Wiegand Typical Range: Less than 12 inches Bit Length: Unknown Facility Code Range: 1-254 Storage Capacity: Less than 1K Encryption: None Security: Low Security (Class A)
@MrBurty0072 жыл бұрын
@@tinylabs Thank you very kind of you.
@closedcaskit2 жыл бұрын
Is this @125khz?
@tinylabs Жыл бұрын
Yes, Keysy copies 125kHz fobs/cards. Sorry for the late response, the best way to contact us is [email protected]
@chichung22432 жыл бұрын
thanks. I just programed today. it worked.
@howardswayable2 жыл бұрын
Hi we have grey keyfob hid like the one in your film, and we're wanting to copy it can you supply these readers and writers or can you please put me in the direction of where I can obtain one, many thanks, regards Howard
@tinylabs Жыл бұрын
Hi Howard, we plan to have Keysy 4-button Duplicator inventory available in mid September 2022. The microchip shortage is delaying manufacturing. Please email [email protected] if you have any other questions.
@chichung22432 жыл бұрын
my building used one of the HID keyfob. When I used the chinese made RFID reader it read " HID card reading success!Replace the 5577/'s card" so is this mean this is a t5577? I see they have couple type out there from HID. How can i tell which keyfog is the one i have? Is the Keysy will work on my keyfob? Should I buy the Keysy and the Keysy RFID Duplicator? thank's
@tinylabs2 жыл бұрын
Send us a picture of your building's key fob to [email protected] -- we will determine compatibility. Thanks!
@joem13yearsago732 жыл бұрын
It's not re writing. It copied. Not re writing. Also the copy I have on the remote isn't working on my s2 system. Great device you have here keysy
@tinylabs2 жыл бұрын
Sorry you're having trouble, for Keysy support please contact [email protected]
@101RealTalker2 жыл бұрын
I want to use this to access the pool at the hotel down the street from me, so I can by-pass the elevator and pool entrance, but don't have a room key, how can such a fantasy be fullfilled? lol..is there an average frequency I should know about, or??
@tinylabs Жыл бұрын
Hotels use high frequency (encrypted) key cards that are Not compatible with Keysy. Thanks for the question!
@KarimiImran2 жыл бұрын
I checked the link on Amazon, your product isn't available. Us there any other link
@calic61702 жыл бұрын
Can this copy an anytime fitness key fob?
@tinylabs2 жыл бұрын
Keysy has not been tested with Anytime fitness cards. Any card with a stored value, or not operating on 125kHz, cannot be copied by Keysy. If you would like to send us pictures of your card and your building's door reader to determine compatibility, you can email us at [email protected]
@calic61702 жыл бұрын
Can this copy an anytime fitness purple key fob?
@mannyice40882 жыл бұрын
Can do post a video on the BL display how you built it
@xOurStoryy2 жыл бұрын
Hi, I’m trying to copy my condo key fob. The fob works but when trying to copy to a keysy sticker or even the supplied fob it just blinks red three times and that’s it
@tinylabs2 жыл бұрын
Hi Alden, thanks for bringing this to our attention. Sorry for the inconvenience, we will help you with this. Please email your order number to [email protected] -- we look forward to hearing from you.
Пікірлер
i tried to copy a schlage the light is not turning green but orange
Sorry you're having trouble copying your Schlage fob. Double check you have the supported Schlage fob thats marked with a 7610 - tinylabs.io/keysy/keysy-compatibility/ -- if you have more questions or need help, please email us at [email protected] -- thank you!
Hello. Is there anyway that my building management will know that i created 2 clone fabs ?
There’s no way for them to know. The only time this could be detected is if you used a fob with a door that was used to enter and exit. Even then, someone would need to compare timestamps.
Thank u so much !
Keysy makes an exact copy of the original. To your buildings access-control audit log it will appear identical to the original. The only difference will be the Keysy fob will look physically different than your original. Sorry for the late response!
I have a question. Once I assign a signal to the device-the triangle for example- Can I simply over write with a new signal using the triangle again? Also, will the clone fobs hold more than one signal? Or just 1 signal per fob? Thanks very much. Great product.
Correct, you can copy over any saved key on the Keysy 4-button Remote. The stand alone Keysy key fobs and key cards can only hold one credential at a time. Writing a new credential will write over the last one. We appreciate you giving Keysy a try! Please let us know if you have any other questions.
Can we move it to apple wallet?
Unfortunately, no. That is not possible
I followed the instructions, but it still shows orange.
Sorry you're having trouble making a copy-- please email us a picture of your key fob to [email protected] - we will help sort this out!
It was the same HID key fob in the video. It is gone now since I got a copy.
Where can I buy the KF-001 please? Most duplicators do not seem to come with this
Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)
Question my fob has two different purposes it opens the complex doors. It also opens the garage gate but I can only copy for the doors. I need the copy for both. How do I do that?
Keysy cannot copy the long range push-button function. That part will need to be copied by a remote copying service. Send us an email if you would like a referral to a copying service - [email protected] - thank you for the comment!
Once you write the data on one of the cards can how do you erase it to use the card for something else? Or does it's erase what you put on there first once you add new key data to it?
No need to erase anything, writing new key data onto a key card will overwrite the existing stored key. Thanks for the question!
What if I wanted to get the frequency from the reader and put that into the fob
Check our compatibility page for your buildings fob, if you don't see it, please send us a picture! tinylabs.io/keysy/keysy-compatibility/
So can it only read RFID or also NFC? and do you need keys from keysy to copy or normal nfc or rfid cards or chips
Keysy copies RFID (not NFC) and Keysy can only write copies to Keysy branded rewritable key fobs, cards, stickers and wristbands. Thanks for the question @Doiphie!
Es los mejor yo tengo copias muy buenos resultado
¡Hola! Gracias por las amables palabras. ¡Apreciamos que se tome el tiempo de dejarnos un mensaje! :)
Can't write to another HID Proxy; only copy from original HID
The Keysy 4-button Duplicator can only write to Keysy branded key fobs, cards and stickers. Please reach out if you have any other questions! [email protected]
(SEPTEMBER 2023) I CONCUR THIS THING WORKS BETTER THAN ALL THE CHEAP AND HIGH-END, HANDHELD READER/WRITER/COPIER ELECTRONIC DEVICES OUT THERE NOW. NO NEED FOR TOUCH SCREEN, FREQUENCY TUNING, OR VIEW SCREEN. UNFORTUNATELY, THE SYSTEM IS PROPRIETARY SOFTWARE FOR KEYSY PROGRAMMING AND FUNCTIONALITY. UNFORTUNATELY, I AM STILL FIGURING OUT HOW TO OVERRIDE THEIR SYSTEM TO WORK WITH GENERIC KEY REMOTES, CARDS AND KEY FOBs.
Hi, the 4-button device is out of stock on Amazon. When will it be available again?
Hello! Keysy is now back in stock on Amazon and our Tiny Labs website.
When will these duplicators be available again?
Keysy 4-button Remotes are available on our www.tinylabs.io/store and on Amazon (US and Canada marketplaces)
Just purchased Kesey from you. It is copying the unsalable to the Kesey remote, but will not reprogram the Kesey fob. Please help!
Hi Rosemary! Thank you for the question, I believe we have helped you via eBay - if you still need help or have questions please email us at [email protected]
hi tony , thanks for video .can i get link sofware? Thanks Tony . mail: [email protected]
I buy and Only Put in Ámbar color. No green 😢
We would be happy to help with this! Please email us at [email protected]
Does this work with ProxCard II?
Yes, Keysy can copy HID Proxcard II - send us a message at [email protected] if you have any other questions. Thanks!
@tinylabs if I already have something copied and then I need to copy something different how do I reset to copy something else over it?
Hello! You can copy over a stored tag on the Keysy remote infinitely. The process is the same as if its the first tag you are copying. You if you run into any trouble please send us an email at [email protected]
My building uses a CDVI key fob to enter the apartment building, It does not take batteries. What frequencies do they use? I did a test and placed the fob in an RFDI blocking wallet and a farady bag. I was still able to open the door. Anyone know why?
CDVI tags use high and low frequency RFID. Typically RFID blocking wallets and bags block High Frequency. To help determine compatibility for your CDVI tag with Keysy, please email us a picture at [email protected] -- Thanks!
Any chance you guys are going to develop a fob the same size and shape as an AirTag? There are a lot of cases and things like wallets or lanyards that have a slot for an AirTag, and having a keyfob that fits in those would be amazing. EDIT: On the same page as an AirTag, developing a way to import RFID keyfobs for NFC to iPhones or an Apple Watch with Apple Wallet could be a big prospect for you guys.
Thanks for the suggestions! We don't currently plan to have an RFID solution in an airtag form. We do have small round Keysy plastic tags, they are much smaller than an Airtag. We are developing a new version of Keysy that will be compatible with all 125kHz fobs and key cards.
Can the keysy card be writen by a indala26 program?
We do not recommended writing to Keysy cards with anything other than the Keysy 4-button Duplicator remote
Is this out clone raw data ? Can it be modified instead ?
Keysy can only make a 1 to 1 copy of the original key fob. Don't hesitate to send us an email if you have more questions - [email protected]
Hi does it works with Kantech Fobs?
Yes, Keysy can copy Kantech ioProx fobs. If you have any other questions feel free to send us a message at [email protected]
in your video u have a hid reader lcd demo is that run on a Arduino . i have a lcd and a reader can i have the code and wiring diagram pls Thanks
in your video u have a hid reader lcd demo is that run on a Arduino . i have a lcd and a reader can i have the code and wiring diagram pls Thanks
got today wow how cool mad sick .. The reader the reader and lcd on the desk can have the code for it pls . i can make a small pcd for it and have a portable hid rfid reader / tester thank you Pawel
We pieced together the LCD display with spare parts and unfortunately don't have a parts list. We can email photos of the PCB if you reach out to us at [email protected] - thanks!
I think my Keysy is broken. It blinks red very slowly and then flashes yellow. Can you help with this?
Sorry you're having trouble and yes we can help with this. Please email us at [email protected] and we will sort this out for you. Thanks!
do these work as standard rfid keys? is there anything special/proprietary about the awid fobs or can I buy any old rfid fobs online?
Keysy makes an identical copy of AWID fobs and cards that can be used just like the original. Hopefully this answers your question, if you need clarification please email us at [email protected]
does it work with SecuraKey RKKT-01, RKKT-02 ? thanks
Yes, Keysy is compatible with your Radioking (Securakey) fob. Thanks for the question
Tried the site and all they offer is items similar to the same one you are advertising, no price, no item to order, no info on it, only one picture then it goes on to other accessories but no duplicator. ebay has none, one seller in ebay told me, they were discontinued and new ones are in back order only from company. really liked this duplicator.
The microchip shortage has caused some manufacturing delays for the Keysy 4-button duplicator remotes in 2022. More inventory will be available mid September 2022. Please email [email protected] if you have any other questions - thanks for reaching out!
Can it copy Paradox C704 Blue Proximity Key Tag? 2nd question how to know if it is hid or rfid type? Both are 125khz.
Hello! Keysy is not compatible, unfortunately. We recommend using CloneMyKey to make a copy - if you would like a promocode please send us an email! [email protected]
@@tinylabs Can I get Technical data on this Paradox C704 fob? Or can you direct me to get technical data from elsewhere? Like, processor, how many bits etc?
@@MrBurty007 I'm not sure of the bits as Paradox isn't a fob we support, here is the info we have on it: Manufacture: Paradox Alternative Names: C704, CR-R704-B Format Names: Paradox Proprietary Format Technology: Radio Frequency Identification (RFID) using low frequency data transfer Key Type: Low Frequency Contactless/Proximity Key Fob Dimensions: 1.18″ x 1.42″ x 0.20″ Weight: 0.2 oz (5.67g) Material: ABS Plastic with ultrasonic welding Antenna Size: Medium Antenna Geometry: Round Modulation: Frequency-shift keying (FSK) Interface: Wiegand Typical Range: Less than 12 inches Bit Length: Unknown Facility Code Range: 1-254 Storage Capacity: Less than 1K Encryption: None Security: Low Security (Class A)
@@tinylabs Thank you very kind of you.
Is this @125khz?
Yes, Keysy copies 125kHz fobs/cards. Sorry for the late response, the best way to contact us is [email protected]
thanks. I just programed today. it worked.
Hi we have grey keyfob hid like the one in your film, and we're wanting to copy it can you supply these readers and writers or can you please put me in the direction of where I can obtain one, many thanks, regards Howard
Hi Howard, we plan to have Keysy 4-button Duplicator inventory available in mid September 2022. The microchip shortage is delaying manufacturing. Please email [email protected] if you have any other questions.
my building used one of the HID keyfob. When I used the chinese made RFID reader it read " HID card reading success!Replace the 5577/'s card" so is this mean this is a t5577? I see they have couple type out there from HID. How can i tell which keyfog is the one i have? Is the Keysy will work on my keyfob? Should I buy the Keysy and the Keysy RFID Duplicator? thank's
Send us a picture of your building's key fob to [email protected] -- we will determine compatibility. Thanks!
It's not re writing. It copied. Not re writing. Also the copy I have on the remote isn't working on my s2 system. Great device you have here keysy
Sorry you're having trouble, for Keysy support please contact [email protected]
I want to use this to access the pool at the hotel down the street from me, so I can by-pass the elevator and pool entrance, but don't have a room key, how can such a fantasy be fullfilled? lol..is there an average frequency I should know about, or??
Hotels use high frequency (encrypted) key cards that are Not compatible with Keysy. Thanks for the question!
I checked the link on Amazon, your product isn't available. Us there any other link
Can this copy an anytime fitness key fob?
Keysy has not been tested with Anytime fitness cards. Any card with a stored value, or not operating on 125kHz, cannot be copied by Keysy. If you would like to send us pictures of your card and your building's door reader to determine compatibility, you can email us at [email protected]
Can this copy an anytime fitness purple key fob?
Can do post a video on the BL display how you built it
Hi, I’m trying to copy my condo key fob. The fob works but when trying to copy to a keysy sticker or even the supplied fob it just blinks red three times and that’s it
Hi Alden, thanks for bringing this to our attention. Sorry for the inconvenience, we will help you with this. Please email your order number to [email protected] -- we look forward to hearing from you.