Thanks, your video is the perfect entry point for me to the world of rfid, got a kit of an arduino and reader from amazon and will be arriving soon. Can't wait to give it a try 👍

@gladiator8325

4 жыл бұрын

Heavenly Juice how did it turn out

@AndyMcGeever

3 жыл бұрын

@@gladiator8325 He's still locked in somewhere..

@----------------------------60

2 жыл бұрын

Where you able to change the RFID number?

You wouldn't happen to have a video or a close up picture of how you set that up would you? I see you added the diagram, but would like to see how you did it. If possible.

Did you not have to use a key for this? If I try this...it isn't able to read it because I don't have the key. Does that mean that your card wasn't encrypted at all? Or just used the defualt key already located in the MiFARE code examples?

best video on the internet tbh

what's the 5v pin hooked to?

How to use the RFID-Cloner file?

bonjour j'ai une question. Des que je débranche l'alimentation de Arduino et serrure , le serrure s'ouvre et ferme rapidement pour initialiser je crois. Mais si quelqu'un le sais il peut couper alim pour s'ouvrir. Que faire svp. Merci en avance

Can you help me. I am getting this in serial Monitor: Card did not respond to 0x40 after HALT command. Are you sure it is a UID changeable one?

Hi, can u help me plz, I have a variable uint32_t chipId; i want to write its content to an rfid block(for example 60) how can i do that?

Worked great, thanks for the demo!

@IllInformedHuman

Жыл бұрын

You are very welcome :)

My school uses wireless cards for coffien at a vending machine they say if i can copy it i can will this work with these kinds of cards

@ricchigowda1531

4 жыл бұрын

Yes 100%

@hectorjuncal2312

3 жыл бұрын

you can also use the "Proxmark3" to hacking the internal metadata

@iicloudbob8793

3 жыл бұрын

Did it work for you?

@maRYANet

3 жыл бұрын

will not work if you just bought a coffin

@djolesimon2928

Жыл бұрын

Need to get close to card first

how can ı find the circuit diagram in this video

Do you know if this will work with an HID seos prox card? In addition, if I'm trying to copy one of those cards, do I need to get mifare cards, or is a 13MHZ one OK?

@xlonemycard1068

5 жыл бұрын

No it will not work.

Ik its an old video, but would this work with Mifare classic cards which are encrypted? I get the failure to communicate error when the card is definitely in reading distance

@IllInformedHuman

4 жыл бұрын

If you are just trying to read a passive card, both the standard Mifare card and the RC522 communicate at 13.5MHz. You shouldn't have an issue. If you have an active card (It has a battery) then it may only give information to a reader if it first sees the reader give it a "code" or something similar. Of course yours couldn't read for any number of reasons. You will have to do some investigating.

How do you use rfid cloner? I'm new at this stuff

My card keeps saying time out or error. Any info on that ?

Thanks really heiped with new ssd especially since they have dropped in prices!

Can i clone a Stanley thob/tag from the previous? I don't have a card just a key thob that I want to clone

@2muchofyou

3 жыл бұрын

key FOB?

Ski resort uses rfid.... but they re load your card every other time you come would this work? For that

@soilder570

4 жыл бұрын

I believe this works by copying the data on a card you already have and then writing it on a new card/key so if you need a new card every year, it probably won't work but you will be able to copy the card and have multiple ones

what is the diffrence between nfc shield and this card and how do i make the data to get dumped on a sd card

@IllInformedHuman

3 жыл бұрын

NFC is a different frequency. It is typically used with novelty "data dump" points. ie. Museums, street vendors. Since most cell phones can read it. MIFARE cards operate at a different frequency and are a bit more difficult to use. You need more specialized hardware to use the MIFARE cards.

@l2m773

3 жыл бұрын

@@IllInformedHuman alright thanks for your response

♥

Good video! I see your responding to the comments semi frequently. If you made the breakout board/arduino set up more portable, would it be possible to "use" someones card for a few seconds while they're "distracted" to get their UID, and then later on copy it to a re-writable RFID card/dongle from another location?

@LordePG

4 жыл бұрын

Hackerman

@lavender0666

2 жыл бұрын

check out deviant's video on badge cloning

@mr.doggoman5651

Жыл бұрын

thats what im trying to do 🤣

@scottcody2184

Жыл бұрын

😅 🎉

The dumb info won't up load for some reason, it saysArduino: 1.8.5 (Mac OS X), Board: "Arduino/Genuino Uno" /Users/chisomodimmegwa/Downloads/rfid-master/examples/DumpInfo/DumpInfo.ino:37:21: fatal error: MFRC522.h: No such file or directory #include ^ compilation terminated. exit status 1 Error compiling for board Arduino/Genuino Uno. This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

@AshiBass

5 жыл бұрын

Chisom Odimmegwa it cant find your mfrc522 library

Where do u find the 0 writeable tag ?:( i have bought ones that only claims that it is when actualy isnt block 0 writeable:(

@blehe38

4 жыл бұрын

This might not be right as I'm really new to RFID in general, but I believe if you're looking for low frequency tags (125kHz), you should be looking for T5577 ones and not EM4100 (the former has a writable block 0 while the latter doesn't). I'd recommend you do your own research to verify that A) what I said is true and B) that your card is a low frequency card and not a high frequency one, unless you like spending money for nothing.

Thank you, nicely explained. Please is there a way of changing the code so that it would rewrite not 8, but at least 14 hex numbers? I cannot find it anywhere.

@IllInformedHuman

3 жыл бұрын

I am not sure. I only reviewed the library I cover in the video. I have not invested the time to go beyond that. Good luck!

@phosphor25

3 жыл бұрын

​@@IllInformedHuman Ok, I understand, thanks for your response.

I tried to read info from my home entry fob or the card from my work but they both cant be read at all. Looks like the rc522 doesnt see them, can you tell me why? It reads fobs provided but not the ones I would like to play with... Any ideas how to copy my home entry fob?

@Mr_Gadge

4 жыл бұрын

Did you ever find out?

@mohammedal-hinaai1122

4 жыл бұрын

Tell me if you find out the solution

@ammoosaa

4 жыл бұрын

Check the specifications of the rc522. It may only be programmed to read certain RFID chips that are different from your cards. Even though the frequencies may be the same, each chip type runs its own protocol that your reader needs to be programmed to detect.

Can this opensource code clone ICT POS 175 fobs? Or would I need a different github library to clone that type of fob?

@IllInformedHuman

4 жыл бұрын

Not sure? Give it a try!

i keep getting this error although i tried 5 different tutorials Firmware Version: 0x0 = (unknown) WARNING: Communication failure, is the MFRC522 properly connected? Scan PICC to see UID, SAK, type, and data blocks...

I have this output while i am using dumpinfo: PCD_Authenticate() failed: Error in communication; Why could it be?

@legenarymaster3696

5 жыл бұрын

I've seen other people with the same problem on videos not similar to this one. From what I understand its just a shit rfid chip

@IllInformedHuman

5 жыл бұрын

How dare... actually that's fair.

Great Video! Does this code work for the RDM630 (125kHz) module other than RC522 (13.56MHz)?

@IllInformedHuman

3 жыл бұрын

This only works for the 13.56Mhz. I believe you can use your phone (if you have the capability) to program at 125kHz. Otherwise, I am sure another board exists.

I've managed to change the UID on a block 0 writable card. But in block 0 after the UID their is more data there (like in your video) and that is different. Any help?

@IllInformedHuman

6 жыл бұрын

After you have changed the block-0 and find you have info in the other blocks, use the RFID-Cloner code mentioned in the video. That code will have you scan the card you want to clone and then have you scan the card you want to copy the info to. It walks you though the process if you have the com port up. Or, if you are up for it, you can use the RFID-Cloner code as a base and modify it to allow you to manually set what is written after Block-0.

@joebuckton

6 жыл бұрын

Ill-Informed Human thanks. I got it working another way. By adjusting the changeUID code for the full block 0 and slightly altering the library. Not an elegant solution, but it worked.

@IllInformedHuman

6 жыл бұрын

If it works, it is as elegant as it needs to be! :)

@masbejo3625

5 жыл бұрын

@@joebuckton hey joseph. Idk if you will reach out since its already about 4 months from the time you comented. I bought some tags which should be block 0 writeable but turnout isnt. When im trying to change the uid it responded with 'card did not respond to 0x40 yadayadayada...' . So i was wondering if you could send me a copy of your modified library since it would help me a lot with my project. Thanks in advanced, i hope youll reply:)

@joebuckton

5 жыл бұрын

Hi, I've just had a look and I don't seem to still have it. It wasn't very good anyway, I would likely not remember what I changed. When I bought block 0 writable cards I bought two and one didn't work. I have heard that many that advertise as "block 0 writable" aren't. Maybe try paying a bit more from somewhere local. Good luck.

Would it be possible to clone an RFID card for work/home and put it into an NFC enabled Wearable ring? Curious for ease of work entry

@matthewdwu5441

5 жыл бұрын

that whoud be cool

@andrewhennessy620

4 жыл бұрын

RFID and NFC are different but it is possible to clone NFC also

@Zhak7

2 жыл бұрын

​@@andrewhennessy620 ( NFC ( Rfid ) ( bluetooth ) ( WiDi ) ... ) Not different, RfId is a type of NFC

How do you check whether the cards UID can be changed because I've tried these steps with exactly the same keycard and it won't allow me to change it

@IllInformedHuman

2 жыл бұрын

The UID (also known as block 0) is "supposed" to be un-editable. You need to find a shady manufacturer. Which is why I went with a Chinese based one.

Hey. Do you happen to know what those wires you used are called.

@IllInformedHuman

4 жыл бұрын

I used male to male jumper wire.

Hey bro, cool video, Can u give me the link to buy those RFID tags you're using?

@pappajohndodgybob

4 жыл бұрын

Same

@ottop1377

3 жыл бұрын

you can probably buy them in bulk on amazon

@barrychn1947

3 жыл бұрын

If you have any questions, please contact me

Probably a really dumb question but do you have to solder the wires to the rc522

@IllInformedHuman

5 жыл бұрын

The one that I purchased already had pins soldered on. Some kits may require you to solder, so check to see if assembly is required before you buy.

Compilation error: Error: 2 UNKNOWN: exit status 1 please hlep

Hey I have questions about the process, I am trying to copy a card to my Implant but it won't work. Thank you

@IllInformedHuman

Жыл бұрын

The biggest issue is typically getting a block 0 writable RFID card.

How does one clone cards using the RC522 and a raspberry pi 3? I can't seem to find any information anywhere

@IllInformedHuman

6 жыл бұрын

I have not tried to use a Raspberry pi with the RC522. I suspect "drivers" for the chip would need to be written to work with a Pi. And since it is so simple to use an Arduino, I suspect not many are tempted to get it working with a Raspberry pi.

@UncleSammy

3 жыл бұрын

Same problem here except with Raspberry pi

Rc522 only reads and writes on 13.56 mhz frequency. How can I do than on 125 khz frequency?

@IllInformedHuman

10 ай бұрын

You would need a different reader/writer. The 125khz band is fairly old when it comes to ID cards. There are a ton of options available, seach "125Khz ID Card Reader" on amazon and almost all of them will also allow you to copy the cards you read.

hi, facing this error Card did not respond to 0x40 after HALT command. Are you sure it is a UID changeable one? any suggestions

@IllInformedHuman

10 ай бұрын

You need a block 0-writable card. Most cards you get everywhere except china will have a hardware lock on block 0. You will need to pay a visit to a china based amazon store or ali express. They will put "block 0 writable" in the description.

Is there anyway to copy Mifare RFID 1K 13.5Mhz cards? My schools got locks on all the toilets and I kinda wanna piss. Dead ass will ‘borrow’ a teachers card to copy it onto another if there is a way to do it.

Can you still use your old one, (the one you coppied)?? Or only the new one? I hope you can still answer!!

@IllInformedHuman

5 ай бұрын

You can use either the original or the new copied badge as long as they only reference the block 0 or UID. If they add anything else to any other block each time you swipe, you can only use one of the cards that were copied.

Working, thank for tutorial, god bless you

the codes dose not compile , why ?

@Bigbosspixel

5 жыл бұрын

I ve got the same issue

If these tags can be completely read and cloned - what good are they? They would have had to come up with something smarter like private and public key...

@krazykubangaming808

6 жыл бұрын

well the range on these is very limited so you would have to steal someones key to clone it or have a pretty expensive longer range set up

@syahrul9282

5 жыл бұрын

To decrease the potential of security breakthrough the key need to be encrypted i guess

i like your video! really cool video but your company card didn't need decryption?? was it that simple to clone?? that's poor security.

@sheeshifpv7861

3 жыл бұрын

RFID is really poor

@UncleSammy

3 жыл бұрын

Its not a company card. I have one to . they come with the scanner

Do you have an app where you can see where to build the board? images something like that

@IllInformedHuman

2 жыл бұрын

EagleCAD or KiCAD. Both have free versions you could make boards like this with.

@macbagie

2 жыл бұрын

@@IllInformedHuman Thank you

Can I clone my RFID badge then use NFC on my Android to swipe into the office?

@IllInformedHuman

6 жыл бұрын

It would be possible if you are able to find a way to emulate an RFID card's UID. I had not looked into that possibility as I did not want to load up an application on my phone each time I wanted to gain access. Good luck on your pursuit!

@DownTownDowns

5 жыл бұрын

Assuming your work doesn't use encryption (which, why would they not?) it's totally possible.... Yet the purpose of a security badge is to be secure, I doubt they overlooked security measures like this lmao

@smeshdoggo1954

5 жыл бұрын

@@DownTownDowns don't be so confident when you don't know what you're talking about dumbass. Plenty of companies use mifare classics which are easily readable, and like the first comment said, if you can emulate the UID then it's entirely possible with several companies who still use mifare classics

It didn't work for me. My tag must use a different codification, not Mifare 1k

please one video for cloning 125khz card also

Could you kindly refer some like that we can buy a genuine UID writable? It’s kinda hard to know if the seller are telling us the truth about the 0 bloc

@IllInformedHuman

Жыл бұрын

I wish I could, but unfortunately it is a gamble. I was lucky with my first supplier.

@endiii67

Жыл бұрын

@@IllInformedHuman thanks anyway 👍🏼

Nice video, is it possible to do the same thing with a raspberry pi? I would like to clone my RFID keys as my housing company charges lots for a spare

@IllInformedHuman

6 жыл бұрын

It would be possible to do this with a Raspberry Pi and the RC522. This is possible due to the fact that the Pi can communicate over SPI, which is how the RC522 communicates. I would not attempt as the Pi costs a bit more and would likely require you to write your own drivers/libraries to do a simple clone. Unless Ladyada has already written some...

@any123-og

5 жыл бұрын

Is it a MiFare type rfid card

So changing only the UID is enough?

@syahrul9282

5 жыл бұрын

Up to the card u want to copy...

@maofpv9272

5 жыл бұрын

@@syahrul9282 what u mean ''up to the card''

where to get the arduino?

Is there a way to edit data that are saved into database or to send wrong data?

@IllInformedHuman

4 ай бұрын

You can edit what is on your card using this method. You wouldn't be able to effect the database that references the card.

@oxynnyxo2763

3 ай бұрын

@@IllInformedHuman Can we make a clone card that sends data for entry and exit in a same time for example and to make 8hours difference in between entry and exit. ?

@IllInformedHuman

3 ай бұрын

@@oxynnyxo2763 It sounds like you want to change something on the Database side of the card reader. Most card reading systems only record when the card was swiped by a reader and which reader. Forcing the reader to change what time it read a card is not possible from the reader itself. You would need database access to alter that.

I KEEP GETTING THIS ERROR I TRIED 5 TUTORIALS SO FAR 7 HOURS OF MY LIFE WASTED PLEASE HELP MEEEEEEEEEE I UNINSTALLED AND REINSTALLED ARDUINO, FIXED THE WIRING, AND TRIED EVERYTHING PLEASE HELPPPP Firmware Version: 0x0 = (unknown) WARNING: Communication failure, is the MFRC522 properly connected? Scan PICC to see UID, SAK, type, and data blocks...

how do i use RFID-Cloner

is the board necessary?

@IllInformedHuman

3 жыл бұрын

Unfortunately, the chipset is necessary. the board is not. As long as you can find a vendor that uses the same chip, you should be good to go.

wht if fails to copy ?

@IllInformedHuman

9 ай бұрын

make sure the block 0 is writable an the card you are using

İs it same with card

@eceyagc8738

5 жыл бұрын

evet

It doesn't upload

Where is github link??!

@ilqarsxverdiyev1429

3 жыл бұрын

OK I see link if you dont see link: github.com/miguelbalboa/rfid

0:35 - cool

where is the code?

@IllInformedHuman

Жыл бұрын

You need to look on the site I mention in the video. Or search it by the name I give. It is up in the beginning.

If you get PCD_Authenticate() failed: Error in communication, try connecting to 5v instead of 3.3v

Same thing can be done by my Pixel 2 phone

@IllInformedHuman

3 жыл бұрын

Phones can easily work with NFC. You might be able to clone MIFARE cards... with more effort than I show in this video.

I'm sleeping.......

@IllInformedHuman

6 жыл бұрын

That is the goal, this is an ASMR channel after all.

@ShivamKatoch1

6 жыл бұрын

Ill-Informed Human was watching cherry crush lol

My UID has 7 bytes not 4.. what now 😂

@IllInformedHuman

Жыл бұрын

Mimic your profile picture XD

It cost's less and its faster to buy a handheld rfid cloner off eBay.

@IllInformedHuman

4 жыл бұрын

If you do that you will miss out on all the fun of doing it yourself!

@holyravioli5795

4 жыл бұрын

@@IllInformedHuman i suppose so

NO CHANGE

I got mine from him ☝️

dont lie , who tried copy your student tag/card in case u lose it to not pay school 😂

Thanks really heiped with new ssd especially since they have dropped in prices!

@IllInformedHuman

2 жыл бұрын

No problem!